"mobile 01" searchbar no respond in IOS7

After update ios 7, when type the words at the searchbar then search but not respond in some wetsite (eg.. Taiwan "Mobile01"）

codycarey wrote:
If you have 'aplay' installed I suggest using 'aplay -l' to list all of the available devices. Take the card and device numbers you want to use and plug them into 'aplay' with
So on and so forth to check that your hardware is working. If it is then you can take that device and set it as your default in your .asoundrc.
No sound from either of my three channels. Didn't bother to check the HDMI-connector as I rarely use it..
[mads@blackBox ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
[mads@blackBox ~]$ aplay -D hw:0,0 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1059: Channels count non available
[mads@blackBox ~]$ aplay -D hw:0,1 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1059: Channels count non available
Channels count non available?

Similar Messages

6680 sync: The mobile phone has not responded.

Hello, When I try to sync via bluetooth I am getting the following message
The mobile phone has not responded.
It worked about 3 weeks ago but hasn't worked since!!
I have looked at the help section and it says that you can't restore settings on this phone. If this is the case, how am I ever going to sync my phone again?
Please help someone!
Thanks

A simple yet effective solution to buetooth connection problems:
Take the battery off and put back on again and power up.
Gadget
Remember to mark all correctly answered questions as Solved. A forum is only as great as the sum of its parts, together we will prevail.

APPlications erratic responding on IOS7

Got the IOS7 on my iphone4S and ipad_retina and it rendered apps unusable.
if you have to use sliders e.g. to control brightness/contrast etc. the slider jumps
instead being able to slide it gently: on e.g. image blender app i can zoom in on
an image but the brush will not do anything.
Seems to me that only the default IOS7 apps and IOS get the full CPU.
I really would have liked the idea to be able to revert back to IOS6. Seem the dev
and test team did not used the IOS7 in a real user enviroment...

Also try going into -
applications/utilities/disk utility (program)
Run the "repair permissions"...this is something that should be done regularly.
Something else that should be done regularly....(you can do this yourself from the terminal, but here's an app that can run it as well...)
MacJanitor 1.3
"MacJanitor is designed to be used on a periodic basis by Mac OS X users who don't leave their computer on (and awake) 24 hours a day. MacJanitor is provided as freeware as a service to laptop and energy-conscious home users.
The Unix subsystems on Mac OS X were originally written for machines that were typically never shut off. Mac OS X inherits this assumption in version 1.0, and has many system maintenance tasks that are scheduled to run between 3 am and 5 am. In addition, there are scripts designed to run weekly on weekends, and once a month in the middle of the night.
If these maintenance tasks are never run (such as on a laptop that is always shut off at night), many log files and system databases will grow extremely large or fail to get backed up...." (try online search for more...)

One page not pinching and zooming on mobile devices

Running OS X 10.9.2
Adobe Muse CC 2014
I have uploaded a 4 page website via FTP. Originally the pages were displaying too big (wide) on mobile devices. I couldn't find a solution to this problem so I created a tablet version of the site. Doing so got around that issue, except now 1 out of the 4 pages is not responding to pinch and zoom on mobile devices. The other 3 pages are fine and display at the correct size.
I cannot for the life of me figure it out. Does anybody know why this would be happening?

So for anyone having the same issue I think I've found the problem.
Mobile devices do not respond to pinch and zoom if there is a scroll motion set on that page in Muse. In my case, scroll motion was set by default on the background image inside the content of an accordion panel widget. I had some trouble getting the scroll motion to save as zero for some reason, so I set the values to zero, then unchecked the 'motion' box in; Fill > Scroll > Motion on every background image in the accordion.
I found the info in this thread: https://forums.adobe.com/message/5982902#5982902

In updating to iOS7, my music was erased. how to transfer music from my iTunes back to my iphone?

And my back up was screwed up because it required a password I couldn't remember. The only way I could reset my password was when I backed up the iPhone again which now had none of my music.
P.S. now my music button doesn't even respond on iOS7 when i tap on it - because it has nothing.
HELP!

Yea, I don't understand your music being in icloud, unless you use itunes match.
there are no music in your itunes media library.
Are these purchased songs?

Auto Signature with T-Mobile

I'm having a problem with the placement of my auto signature through T-Mobile. Whenever I respond to an email, my auto signature is placed at the very bottom of the string of emails...not at the end of the most recent message. Does anyone know how this can be fixed? I already spoke with T-Mobile and they said that is just the way it works.
Solved!
Go to Solution.

Oh yes you can
I'll be right back
OK?
Ok,I' back! just read this thread there are two ways todo it
http://supportforums.blackberry.com/rim/board/message?board.id=8300&thread.id=11025
If you need further assistance please ask! If not:
Please resolve the post using the green kudos’ box.. Simply check the post that had ,
your answer in it. Thanks!
Message Edited by Bifocals on 09-06-2008 12:46 PM
Message Edited by Bifocals on 09-06-2008 12:46 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Groupwise Intelisync Mobile Server

I am using the Groupwise Intelisync Mobile Server and am getting this error while trying to login (Mobile Gateway Server not responding). Can anyone tell me how to troubleshoot this problem?
Thanks in advance...

Mike,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

9/17/2013 - AIR 3.9.0.880 Runtime and SDK Beta

Adobe AIR Beta Channel Update
This beta release provides access to the latest AIR runtime and SDK (with compiler) for Windows, Mac OS, iOS and Android.
Below are some of the key features and benefits of AIR 3.9. Please see our release notes for full details.
Notable Fixes and Enhancements:
3584066: [Desktop][Webkit][API][External] Add a property to StageWebView to switch between the Native engine and the embedded WebKit engine from AIR 3.5 and prior
By popular demand, we'd modified the StageWebView API to add a parameter allowing the developer to switch between the system and built in webkit engines. By default, this parameter is false. Please see below for additional details.
StageWebView (useNative:Boolean)
The object is invisible until it is attached to a stage and until the viewPort is set.
Note: Although it is not prohibited, with some content, failures can occur when the same process uses both the embedded and the system WebKit, so it is recommended that all StageWebViews in a given application be constructed with the same value for useNative. In addition, as HTMLLoader depends on the embedded WebKit, applications using HTMLLoader should only construct StageWebViews with useNative set to false.
@param useNative - When useNative is false, a version of WebKit embedded within AIR is used as the source of the StageWebView created. When useNative is true, then AIR will use the system's default web engine. Mobile platforms only support using the system web engine, so useNative is ignored on mobile platforms.
Known Issues:
3616999: [iOS7] On changing AudioPlayback mode from Media to voice dialog comes up asking permission for accessing Microphone.
3616981: [iOS] Sound gets stop on clicking Power button even when UIBackground tag value set to Audio in application.xml
About the Beta Channel
If you would like real-time notification for announcements related to the AIR Beta Channel, please subscribe to our Twitter feed @FlashPlayerBeta, or follow the Flash Runtime Announcements forums by choosing "Follow this forum" from the right-hand menu on the Forums page.
You can find instructions for getting started with this release here: AIR Labs Page
We encourage you to let us know what you think on our AIR Labs Forum

1. It works fine in AIR 3.6, 3.7 and 3.8.
2. Yes, see code below.
3. I'm testing on a 15-inch Retina MacBook Pro running OS X 10.8.5.
Test code:
package
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.media.StageWebView;
import flash.geom.Rectangle;
[SWF(width="800", height="800")]
public class StageWebViewExample extends Sprite
    private var webView:StageWebView = new StageWebView();
    public function StageWebViewExample()
        webView.stage = this.stage;
        webView.viewPort = new Rectangle(0, 0, stage.stageWidth, stage.stageHeight);
        webView.loadURL("http://www.adobe.com/");
        stage.align = StageAlign.TOP_LEFT;
        stage.scaleMode = StageScaleMode.NO_SCALE;

A few new problems with my G5. Please help!

Ok I have fixed my graphics card dilemma however the monitor still occasionally plays up (maybe the card is cooked somewhere but still works).
1. I have a problem that I really want to fix and it's about the Bluetooth on the Mac. I don't have a Bluetooth card but what I am using is a HP USB Bluetooth stick. I can send files to my mobile easily from the computer, but when it comes to sending things back onto my Mac from the mobile, it doesn't respond. When I send an item from the mobile, a window appears on the Mac saying "incoming file transfer" and it just idles at 'Calculating time & status'. How do I go about fixing this?
2. Another thing, I cannot access certain sites I visit because of Rosetta. I have no clue on how to turn Rosetta off for Safari or Firefox. I tried Apple+I on the application it self and looked for any boxes that were ticked from previous advice. But I cannot find a box that says to turn off Rosetta.
• My computer is a G5
• Power PC
• Leopard 10.5.5
3. One more Problem I wish to deal with once and for all.
I have a video capture device called a Canopus ADVC-100. I use it to capture videos from VCR, etc. I also want to get it hooked up to my gaming console and record gameplay to post on the internet. The problem is, when I open up Final Cut PRO or Empia Capture, the screen just flickers. When I turn my console settings to Pal-50, it works perfectly. But the problem is that some games only work on Pal-60. Is there a way to solve this problem and make Pal-60 work on my Mac?
If you can give out help to any of these problems please number your answers accordingly so I know what your talking about.
Thanks,
Sev

Hi Seva,
1. Are you using the powered USB port in front of the Mac tower, or the port on the keyboard?
2. In Safari/Help/Installed plug-ins you should find: Shockwave for Director
Macromedia Shockwave for Director Netscape plug-in, version 10.1.1 — from file “NP-PPC-Dir-Shockwave”. Your plug-ins are found in Library/Internet Plug-ins/NP-PPC-Dir-Shockwave, nsIQTScriptablePlugin.xpt, Flash Player.plugin, flashplayer.xpt along with others. If these plug-ins are not there, web browser are unable to find them.
Because you have upgraded from a previous version OS, you will have to locate them and move them manually. Look in Users/yourname/Library/Internet Plug-ins.
3. What display do you have? I have mine set to 96 Hertz.
Regards

Where is the Airplay button in iTunes 11.1 for Windows 7?

I have 2 Airport Express to play iTunes through 2 stereo receivers around the house along with computer speakers. Both Airports are available seperately through iPhone4 and iPad4 which I upgraded to iOS7, but previously I could play to both and the computer from iTunes using the blue Airplay button which is missing now and I can only talk to 1 Airport device from each mobile device and the computer seperately. iOS7 control panel on both phone & pad work fine but only to a single Airport, not both simultaneously. I need the button back in iTunes but I can`t find it!

Upgraded to iTunes 11.1 and lost my Airplay icon and connection to Remote app on iPhone 5. Fixed by adjusting settings in Windows 7 firewall.
1. Go to search box in Start button and type in "firewall."
2. Click on "Allow a program through Windows Firewall"
3. Click on "Change Settings"
4. Make sure both Bonjour Service and iTunes are in the allowed programs and features list. If not click on "Allow another program" to add them.
5. Make sure both the tick boxes for the columns "Home/Work (Private) and Public" are ticked.
Finally fixed me after several hours of trying a variety of things suggested in multiple other postings.

6301 & PC Suite - "Data transfer not possible. Che...

Well, as the title says really.
Upgraded from 6280 -> 6301.
I use Outlook 2003 and sync contacts & calendar.
Sync'd the 6280 before finalising upgrade, plugged in the 6301 with a mini-usb cable (All driver reports it installed new hardware fine) once it had fully come into service and it wouldn't sync.
The phone displays "Data transfer not possible. Check connection" and Nokia PC Sync shows the warning "The mobile phone as not responded". It's solution is "Please ensure your phone is in the standby mode, then restart the Synchronisation. "
Have updated to latest version of PC Suite 6.85.
A bit annoying, as I no longer have any contacts info on the new phone...
Running XP, AMD 3ghz, 4gb ram.

Having spent many hours on this I have now got it working...
This is how :
1. On the phone go to : Settings: Sync and Backup: Server Sync: PC Syncronisation and enter a username and password.
2. Select Synchronise in Nokia PC Suite, in the Connected to 6301 window click the spanner (settings) icon. Now click the Adjustable wrench (Advanced) Icon and go to the sync profile tab and enter the same username and password that you used on the phone. Click OK twice and sync away...
Message Edited by kage64 on 05-May-2008 11:04 PM

Problems with PC Suite and bluetooth connection to...

Hi, I have the following:
Pentium 4 PC running Windows XP service pack 2
PC Suite 6.82.22.0
PC Connectivity Solution:
Version 6.43.9.0
Bluetooth stack:
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
I have had repeated problems trying to get a reliable connection between my 6230 and PC using Bluetooth. Actions so far:
- Uninstalled PC suite, ran the Cleaner, reinstalled
- Uninstalled IVT Bluesoleil
- Done battery reset on phone
- Restored factory settings on phone
- Set phone to auto-connect without confirmation
Restoring the factory settings worked -- but only for a few hours! If I so much as restore my ringtone I'm back to square one which is:
- PC suite recognises "Nokia 6230 connected via bluetooth"
- PC Sync either fails to recognise the connection at all, or completes with 0 contacts updated, or gives me an error "the mobile phone did not respond"
- Phone browser sometimes recognises the phone, and sometimes not. Trying to synch via the browser doesn't work.
- Music transfer starts out by recognising the phone, then stalls and loses the connection.
I can't restore factory settings every time I want to synch my contacts or move music/pictures -- life is much too short! Anybody have any other bright ideas?
Thank you!

Hi,
If you are using memory card -> remove that from phone and then try to use PC Suite with your phone...does it help??
BTW: always when you try to use PC Sync, set phone's UI to idle state.

PC suit does not displays messages and contacts

I have Nokia N73 and I have installed Nokia PC suite which displays my images and videos but not my contacts and messages. When I open my contacts in PC suit it displays error that Refreshing contact list fail and during synchronizing PC suite gives warning that your mobile phone is not responded. Please tell me possible suggestions to solve this issue.

Not sure if you've still got the problem, but try the Nokia Suite Cleaner and check the Owner permissions on the user profile in C:\Users or C:\Documents and Settings and its subdirectories.

PC Suite 6.85.12.0 with a Nokia 6230 Doesn't Sync ...

My phone is a Nokia 6230.
My computer is an IBM/Lenovo Thinkpad T42 running Windows XP Professional SP2.
I'm using a Bluetooth connection to synchronize the phone with Outlook.
The system info is:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 11.0
Build 8169
Bluetooth stack:
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
Yesterday I received the message informing me that there was an upgrade available to PC Suite 6.85.12.0. I've had no real problems with 6.84.10.3 but it has a few quirks:
When I synchronize PCS 6.84 with Outlook I have to do it twice. The first time I get a message "Connected to (computer)" on the phone display. The synchronization then ends with a warning message in the last report
PC Sync information.
The mobile phone has not responded.
Possible Solution
Please ensure your phone is in the standby mode, then restart the Synchronization.
If I sync again within a minute the synchronization succeeds. After a minute of no activity the phone displays a message "Disconnected from (computer)" and I am back in the original state.
I can live with this. I just have to hit "Synchronize now" twice about five seconds apart.
The second problem I had was with transferring a largish music file (6 Mbytes) to the phone. I tried several times and it got truncated but I got enough of it (a minute's worth) to be a useful ringtone so I left it at that.
I thought I'd give PCS 6.85 a try and see if a release that promises stability fixes would clear up these quirks. What I ended up with is a release that wouldn't synchronize at all. Every time I tried to synchronize it failed. I would get the "Connected to (computer)" message on the phone follwed about one second later by "Disconnected from (computer)" and the same warning as shown above in the report log.
I then tried to back out to PCS 6.84.10.3. This version, and an older one as well wouldn't work now either. It took me many hours of hair pulling, head scratching, Googling, and experimentation to get back to the version and behavior I had started out with.
Since I didn't see this procedure stated explicitly anywhere let me describe the steps it took.
1) From the control panel remove PC Suite.
2) From the Control Panel remove Cable Connectivity Drivers.
At this point I thought I could just install an older version but the older versions didn't work now either. I then read about PCS Cleaner. So I downloaded that (version 3.6) and tried to run it and got the rather confusing message:
"PC Suite Cleaner does not support this version of Nokia PC Connectivity Solution (version number). Please contact Nokia support."
I then tried manually cleaning PCS files and registry but I only made things worse. Finally after many futile attempts it dawned on me that the above message meant "First remove PC Connectivity Solution" so:
3) From the control panel remove PC Connectivity solution.
4) Now PCS Cleaner 3.6 agreed to launch and I was able to scrub the machine.
5) Finally I could reinstall PC Suite. Reinstalling PC Suite 6.85.12.0 gave me the same no synchronization problem. Repeating the whole procedure with PCS 6.84.10.3 brought my system back to its original state.
I have since again received theadvisory message that a new version of PC Suite is available. Needless to say I am now studiously ignoring it. I do not have the time or patience to work on this again until someone offers a workaround/fix for this problem.
Any ideas?
Sam Gamoran
NDS Technologies Israel

SOLUTION AT LAST!! (as dumb as it may be)
-- This posts refers to an older version of PC Suite than mine, but I suspect the situation (and the problem) is very similar.
Hey everyone!
It's been hours of forum searching and reading million of suggestions how to make my 6230 sync with the *several* latest versions of Nokia PC Suite (HELLO! NOKIA ARCHITECHTS! You have some serious recurring problem here! Don't abandon the veterans in your client base, it reflects really bad on you service-wise! At least post an official message that you acknowledge the problem and that you're working on it!)
Seems that tons of people encountered my exact problem:
Connection works, pairing works, file copying works, synchronisation doesn't work.
Well, the forums mentioned that the older older versions of PC Suite had a very quick timeout problem, so one had to synchronise twice, fast, in order for sync to succeed.
Now, it seemed like the timeout was reduced to almost "0", and disconnection immediately followed connection.
So, even though I did not see any second confirmation message (normally the phone shows a request to "connect" and then a second request to "transfer data" ) - I thought maybe it was there only disappearing very fast. So I decided to simply click twice fast, and I mean REALLY FAST, on the main button to accept, hoping that the connection will be kept. And VOILA! The connection was kept, and the sync was successful.
I know it's not a permanent solution, but for me, for now, considering how hard (why is it hard, Nokia??) and annoying it is to revert to a much older version of PC Suite - it's at least a temporary solution that works. And the only one I've found so far.
================================
Specifications:
Phone: Nokia 6230
Firmware: 04.44, 21-09-04
PC Suite: 6.86.9.0
MS Windows: XP SP2
MS Outlook: 2003 SP3
================================
I wonder if that would work for everyone.
If so please spread the word, seems that lots of people would like to know that. At least until a decent fix will be released for the PC Suite, that is.
Cheers,
Ohad

Feature removal complaint (miss-informed by on-line experience)

I went to Verizon's on-line site to add a feature, 4G Mobile Hotspot, on Saturday morning (5/10/14). When prompted and asked if I wanted assistance by Joy, I mentioned I wanted to add 4g Mobile Hotspot. Joy responded and asked if I wanted 'free' voice-mail feature, as I was paying $1.99/month for Premium voice-mail storage. I said I need to keep the same features, with the ability to have 50 saved voice-mails. Joy assured me that I would maintain the same feature, having up to 50 voice-mail messages. I asked to be certain, and Joy said yes. So, I said sure, but I still felt skeptical. Well, over my weekend trip, I found that my voice-mail box was full, but only had 47 saved messages (business and person purposes).
I called Verizon Support on Monday (5/12/14) and found that indeed Premium voice-mail was removed and the reason for the full voice-mail box. I think the maximum under the standard 'free' option is 20, but the support person was not certain. I was also told that the Premium voice-mail feature that I had, is no longer available as a selection option and he would have to request that feature back to me, but it will take several days to even find out. AND, the only way for me to find out is to come back to my account and check it from time-to-time.
So .... I feel I was miss-informed by Joy and now I my real estate clients cannot save a voice-mail message, unless I delete at least 25 currently saved messages.
I have always been a big fan of Verizon and have been a customer for many, many years! However, I'm thinking of dropping my Verizon land-line service, mobile cell service, switching my Verizon DSL service to Cox cable for Internet and TV, (also dumping DirecTV).
Randall (the very frustrated Verizon customer).

Well thanks for the response, but I wonder whether you read my post.(?) It was because of the online option that I incurred overage charges, had my corporate email disrupted, and ended up with a plan that cost me more than I was paying rather than less, all entirely against my desire.
What makes it all worse is that I had to spend many more hours on the phone with Verizon to try to get this corrected and have never been able to to my satisfaction. A lot of time spent for an absence of service leaves me profoundly dissatisfied.
I understand that someplace in the online process a question was apparently asked with insufficient explanation that I somehow answered as, "Please bill me an extra $116.10." This alone seems like a really good reason to never use the online option since, again, I cannot imagine I would have had this problem doing it on the phone. Not being able to correct this errant answer is a sad statement on Verizon customer support.

"mobile 01" searchbar no respond in IOS7

Similar Messages

Maybe you are looking for