Mobile: fullscreen vs StageDisplayState

Can someone explain to me what the difference is between <fullscreen>true</fullscreen> and StageDisplayState.FULL_SCREEN_INTERACTIVE, and how these should be used?
Testing on an Android Nexus 4 it seems to be that:
StageDisplayState.FULL_SCREEN_INTERACTIVE hides the status bar at the top.
<fullscreen>true</fullscreen> hides the status bar at the top and initially reduces navigation buttons to dots, when they are touched they become full icons and stay that way.
Questions:
Is this the only notable fullscreen behavior on Android?
What is the behavior on iOS?
Is there any way to return to the initial state of <fullscreen> (with the navigation buttons reduced to dots) from AS3?
Thanks!
-Aaron

And let me add, I HATE the term Fullscreen.
Just one more way the TV/Film industry is convincing the uninformed public that Widescreen movies are wrong. The black bars are wrong. I don't want a widescreen TV, because then I won't be able to view fullscreen.
Almost as bad as the EDTV moniker on cheap sets.
I don't know. I have an HD 16:9 plasma. All my Widescreen DVDs fill the screen nicely. Is there something wrong?
Idiots.
Sorry, quick rant on stupid marketingspeak. If you want to move the public forward into buying an widescreen TV, don't call those DVDs Fullscreen. Call them Cropped, or Edited, or Altered.

Similar Messages

Browser Window Fullscreen

dcr on html.
i would like to change browser window fullscreen.
like "StageDisplayState.FULL_SCREEN" in ActionScript 3.0.
please teach me.

F11 key hit can browser window fullscreen.but. The user pushes the button, and I want to make it to fullscreen,like "StageDisplayState.FULL_SCREEN" in as3.
I think this ability is unique to the Flash Player and that the Shockwave Player simply can't do it. If you make a Flash movie fullscreen in the browser and use the Alt + TAB key combination (in Windows) to see what other windows are open, there is an instance of the Adobe Flash Player independent of the browser, and if you TAB to another window it is closed - this is the fullscreen representation of the Flash movie. Even if you messaged a Flash movie in the same page to do this, I expect that all you'd get would be the Flash movie occupying your entire screen with the browser (and Shockwave) left as-is. I think the best you'll get is for your Shockwave movie to scale to fit as much real-estate as is available in the browser window.

Air app on Android fullscreen

I'm building an AIR mobile app for android >= 4.0. I must be missing something or doing something wrong because no mater that i do, i can't get the fullscreen working rigth.
The tablet bottom bar always shows up. In current version the bar only shows 3 dots and have somekind of alpha but it doesn't allow me to draw above it or below it.
In my app description XML i have:
<initialWindow>
<aspectRatio>landscape</aspectRatio>
<renderMode>direct</renderMode>
<autoOrients>false</autoOrients>
<fullScreen>true</fullScreen>
</initialWindow>
And the bar is still there
Tried set the fullscreen to false and then:
stage.fullScreenSourceRect = new Rectangle(0,0,1280,768);//Capabilities.screenResolutionX, Capabilities.screenResolutionY);
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
No effect... the damn bar is still there.
Using FB 4.7, Air 3.8 and -swf-version=21
Any help or a pillow to put between the head and the wall would be very apreciated!!
Thanks

The same here... I tried this:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
stage.showDefaultContextMenu = false;
and:
<fullScreen>true</fullScreen>
but it doesn't work.
I have rooted device (Tracer OVO 1.2 tablet, Android ICS 4.0.3) with three physical (touchable) navigation buttons on the right side.
Using Flash CS6, Air 3.9.
I'm sure it's possible because other apps and games run in fullscreen like a charm.
Is ANY way (maybe third party apps) to get rid of that damn staus bar?

The Xperia Z1 is the best mobile device I have owned so far.....but for one annoying flaw.....

OK, I have owned the Z1 for around 6 months now, and I have LOVED the product...I more or less have no complaints, and its become pretty much my favorite electronic device, except for my gaming PC : D
I use it day in day out, listen to the radio, watch video, surf the web, exepriment with all kinds of the incredible apps, and of course, play games (and it will be gaming that my comment is primarily about)
Thing is....gaming on the Xpeia Z1 is a GOOD experience....excellent GPU performance (though it gets HOT! ...really noticeably HOT..not warm....**bleep** it gets hot! : D), great screen, great sound with headphones (though the headphones jack tends to get in the way when holding the unit in landscape), and if playing without headphones, I find my hand covers the speaker and totally muffles the sound!
These are just small niggles, but nevertheless, things I notice, that I would desire to be slightly changed if I had the chance, but I realise they are issues with the hardware and design, so Im happy to wait unitl I get my next phone (likely the Xperia that comes out in 18 months when my contract is up!) and see how they are dealt with through the evolution of the series.
These are just mega picky things Ive noticed in an otherwise perfect design (for me....just my opinion).
However...the only thing that REALLY REALLY REALLY ticks me off, is a software issue....that has apparently been dealt with via the 'Immersive Mode' feature in Kitkat 4.4.4 (which I am running on my Xperia)....
That is the 'Soft keys' not disapearing in games, and taking up quite a large chunk of screen real estate.....in a very annoying place that depending on the game, can even quite easily be accidentally touched, kicking the unwary user out of the game,! (ARRRGHHH!)
Now I realise that proper support for 'Immersive mode' is actually up to the developers (am i right in thinking this?) and I have tried a couple of games that advertise support, and its all well and good, and works fine, also my comic book reader supports it, and so I get ALL my screen for books (rarely, I use HDX for that), documents and comics....and of course the built in video player has seemingly ALWAYS supported complete fullscreen without these **bleep** buttons getting in the way....
And its such a GREAT screen too....does anyone know exaclty WHY it is, that the Xperia series in particular sacrifices so much screen to these buttons while gaming?
All games Ive tried have the 'Top Bar' (with battery, signal and time etc..nto sure what its called officially)...automatically hidden..so why not the 'bottom bar?'..the menu keys? Especially since the strip of screen is so HUGE!!
To show 3 **bleep** buttons!
What really makes me wonder, is that even my Kindle Fire HDX (which I use primarily for actualy reading books/newspaper/articles) and that I consider an 'inferior' device in most respects..actually has a 'hide soft keys' feature...where in games and apps the 3 buttons and strip of screen are replaced by a very small and unobtrusive little tab...that you simply swipe out to expose the keys....
A GREAT solutuion!
Why isnt there something like this on the Xperia series?
I have deliberately explained myself fully here because I have become very frustrated wth this just recently, as I have been playing a lot of the brilliant games by the developer RORTOS...that makes impressive flight simulator games....games that (Particularly F-18 Carrier landings Pro 2) cannot run very well on my Kindle FIre HDX....
They play beautifully smoothly while maxed out on the Z1 though....(and the same goes for GTA Vice City, that I have been enjoying playing again on mobile on the way to work every morning : D...thanks Sony and Rockstar for a great start to my workday xD)
BUT these great games are being MARRED quite badly by those DAMNED BUTTONS!!
In F18 Carrier Landings Pro 2 and Airfighters (2 RORTOS games that are really superb if you like flight sims) several controls are positioned at the edge of the screen...and the soft keys are right in the way...so they are functionally gettiing in the way...
and whats more, they ruin the original design philosophy of the Xperia Z1...the design philosophy of 'OmniBalance'..because the game image is not equidistant from the left AND the right side...but shunted one side or the other, because of these **bleep** buttons!
(I hope I have explaiend this, and you can picture what I mean...it really irritates me : D)
Yes I am aware of a few apps that are available, both root and non root solutions.. but I have found them all too imperfect...just not good enough, too clunky, too much configuring and messing around to get them to work...and even then they have too much impact on other functions to be worth it for me...since i do use my Z1 for a LOT of different things.....
The ones Ive tried are fine as kind of Dev Tools...but I really love the overall design of the Z1...and I like to KEEP it beautiful and slick to use...as slick as it looks...(yep, I like the cosmetics so much, I cant even bring myself to keep it in a case xD...I just have to be careful with it...and its hardly got a scratch so far...just a few hairline type ones : (....
So...can Sony please add a little feature, like the small tab that I mention above on the Kindle Fire HDX, to hide those keys?
I have messaged RORTOS about them supporting Immersive mode fully, and they said they would look into it (of course they said that!), bur that most devices these days ALREADY hide the soft keys in games...and in my experience, thats true!
Out of 5 or 6 devices Ive played games on, i have to say that the Xperia series is easily the most effected by this issue.
and its ANNOYING as **bleep**...and I KNOW Im not the only one that thinks this...but I havent found an official Sony response (or indeed Android or Developer one) about what is likely to be done.
So does anyone have any news?
Does anyone know why one of the best screens and best GFX performers in a mobile device is still suffering from the soft keys being present at all times in games?....(except every now and then Ive noticed the keys are slightly camoflaged, as white dots....the strip of screen is still taken up, but the actual key icons are reduced to white dots (anyone else seen this?) but this just seems to happen randomly......sometimes it does that, mostly it does NOT...and besides, its not a real solution anyway...since a chunk of screen is STILL used up by it....
Please Sony, you use a custom Android, just liek Amazon do on the Kindle Fire HDX (though admittedly, not quite SO customised xD), and THEY can hide these keys without immersive Mode support...
Why cant Sony?
rant over...
I still totally love the phone..Im only going off on one like this because I love everything else about it...but this one thing I think is actually a pretty big deal.....so please address it ..
Please?
All the ebst
jim.
(PS I am also really harrassing RORTOS about supporting Immersive Mode too....if ALL the Devs supported it, then this wont be an problem (I suppose anyway?)....but Im not sure if there is an issue about how many people are actually USING KitKat 4.4.4...I would guess a LOT but perhaps not quite enough to make a special effort for?....anyway...Im not just picking on Sony : D)
rant really over.....for now.....

You had to have some kudos for the effort put in to your thread as week as the point you make.

How to set a background image to fill the entire screen on any device in a spark mobile application

Hi,
I started developing a mobile application with Flex.
I'm trying to set a background image to fill the whole screen. I've been stucked at this point for days now. I tried everything and no solution seems to work for me.
I'm using a TabbedViewNavigatorApplication and i need to set some background images on views.
I need my image to fill the entire screen on any device. i don't need to mantain image aspect ratio, just need it to be fullscreen. This seemed to work when setting a custom skin on the TabbedViewNavigatorApplication, however this blocked all my views for some reason and all components contained in view became invisible.
Can you please tell me how can i achieve this?
Kind regards,
Dan

Basically you need a larger image which can accommodate any device. The trick is to show only what each device can display, so therefore some clipping will occur based on device. Have something centered and towards margins have a gradient or just plane colors that way the stuff in the middle will be visible on every device while nobody will care if you are clipping from the color fill.
C

Mobility Radeon 7500 OpenGL issues

Whenever I attempt to use anything involving openGL, my CPU usage hits 100%. Complex openGL programs will drop to a framerate of less than 10, and sometimes crash Xorg. How can I fix this?
General system info:
lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
lsmod
Module Size Used by
ipv6 279604 16
oss_usb 106284 2
oss_ich 18832 4
osscore 552820 4 oss_usb,oss_ich
ext2 68964 1
fan 4448 0
fuse 64856 2
arc4 1756 2
ecb 2812 2
b43 137208 0
radeon 666112 2
ttm 37164 1 radeon
joydev 10528 0
drm 156160 4 radeon,ttm
i2c_algo_bit 5888 1 radeon
e100 34308 0
ssb 45988 1 b43
ppdev 7008 0
yenta_socket 25384 2
rsrc_nonstatic 12316 1 yenta_socket
mii 4892 1 e100
thinkpad_acpi 67988 0
battery 10816 0
nvram 6984 1 thinkpad_acpi
video 20116 0
output 2908 1 video
pcmcia 36168 2 b43,ssb
parport_pc 37060 1
irtty_sir 5564 0
sir_dev 11712 1 irtty_sir
psmouse 60084 0
ac 4224 0
processor 36076 1
iTCO_wdt 11072 0
iTCO_vendor_support 3136 1 iTCO_wdt
mac80211 155788 1 b43
irda 126744 1 sir_dev
crc_ccitt 1724 1 irda
thermal 13912 0
uhci_hcd 23692 0
button 5612 0
ehci_hcd 36620 0
serio_raw 5792 0
shpchp 34384 0
intel_agp 28604 1
lp 9732 0
parport 34412 3 ppdev,parport_pc,lp
evdev 10240 15
cfg80211 90364 2 b43,mac80211
pci_hotplug 28732 1 shpchp
pcspkr 2492 0
i2c_i801 9616 0
i2c_core 21808 4 radeon,drm,i2c_algo_bit,i2c_i801
rfkill 19696 2 thinkpad_acpi,cfg80211
sg 27728 0
agpgart 32660 3 ttm,drm,intel_agp
led_class 4000 2 b43,thinkpad_acpi
usbcore 154032 5 oss_usb,uhci_hcd,ehci_hcd
pcmcia_core 35920 5 b43,ssb,yenta_socket,rsrc_nonstatic,pcmcia
rtc_cmos 11344 0
rtc_core 17976 1 rtc_cmos
rtc_lib 2524 1 rtc_core
ext4 334112 2
mbcache 7104 2 ext2,ext4
jbd2 82016 1 ext4
crc16 1660 1 ext4
sr_mod 16644 0
cdrom 36032 1 sr_mod
sd_mod 28344 5
pata_acpi 4252 0
ata_piix 23268 4
ata_generic 4704 0
libata 169548 3 pata_acpi,ata_piix,ata_generic
floppy 56356 0
scsi_mod 112468 4 sg,sr_mod,sd_mod,libata
dmesg
Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7e000 (ACPI data)
BIOS-e820: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3ff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-DFFFF write-back
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03FF80000 mask FFFF80000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003ff70000 (usable)
modified: 000000003ff70000 - 000000003ff7e000 (ACPI data)
modified: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
modified: 000000003ff80000 - 0000000040000000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 3fea7000 - 3ff5fb2e
Allocated new RAMDISK: 00100000 - 001b8b2e
Move RAMDISK from 000000003fea7000 - 000000003ff5fb2d to 00100000 - 001b8b2d
ACPI: RSDP 000f7010 00024 (v02 IBM )
ACPI: XSDT 3ff731cd 0004C (v01 IBM TP-1I 00002080 LTP 00000000)
ACPI: FACP 3ff73300 00081 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: DSDT 3ff733e7 0AAD5 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: FACS 3ff7f000 00040
ACPI: SSDT 3ff733b4 00033 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: ECDT 3ff7debc 00052 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: TCPA 3ff7df0e 00032 (v01 IBM TP-1I 00002080 PTL 00000001)
ACPI: BOOT 3ff7dfd8 00028 (v01 IBM TP-1I 00002080 LTP 00000001)
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000156e000 - 0001574128] BRK ==> [000156e000 - 0001574128]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000100000 - 00001b8b2e] NEW RAMDISK ==> [0000100000 - 00001b8b2e]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003ff70
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0003ff70
On node 0 totalpages: 261899
free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 271 pages used for memmap
HighMem zone: 34403 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259852
Kernel command line: root=/dev/disk/by-uuid/ce79e597-2b00-4812-95b4-eda62758ab6c ro vga=792 nomodeset
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003ff70)
Memory: 1031828k/1048000k available (3111k kernel code, 15416k reserved, 1120k data, 416k init, 138696k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1422000 - 0xc148a000 ( 416 kB)
.data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
.text : 0xc1000000 - 0xc1309ddd (3111 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
Fast TSC calibration using PIT
Detected 2192.708 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.14 BogoMIPS (lpj=7309026)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
------------[ cut here ]------------
WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
Hardware name: 236686U
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
Call Trace:
[<c10464da>] ? warn_slowpath_common+0x7a/0xc0
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1046540>] ? warn_slowpath_null+0x20/0x40
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1016601>] ? intel_init_thermal+0xd1/0x1d0
[<c10149c3>] ? mce_init+0xc3/0xf0
[<c10ed693>] ? __kmalloc+0x93/0x210
[<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
[<c13014ed>] ? mcheck_init+0x261/0x2b5
[<c12ff55a>] ? identify_cpu+0x377/0x386
[<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
[<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
[<c1429f90>] ? check_bugs+0x14/0x108
[<c109add0>] ? __delayacct_tsk_init+0x20/0x50
[<c1422a31>] ? start_kernel+0x332/0x353
[<c14224f0>] ? unknown_bootoption+0x0/0x1bd
---[ end trace a7919e7f17c0a725 ]---
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4387.14 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0201fff]
pci 0000:02:08.0: reg 10 32bit mmio: [0xd0202000-0xd0202fff]
pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: 0x004000-0x0040ff
pci 0000:02:00.0: IO window: 0x004400-0x0044ff
pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:00.1: IO window: 0x004800-0x0048ff
pci 0000:02:00.1: IO window: 0x004c00-0x004cff
pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x4000-0x8fff
pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 738k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1259350175.183:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1746
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xe8000000, mapped to 0xf8080000, using 4608k, total 16320k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: protected mode interface info at c000:5701
vesafb: pmi: set display start = c00c5795, set palette = c00c57e1
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Switched to high resolution mode on CPU 0
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 416k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a National Semiconductor PC87306
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: ATA-7: SAMSUNG MP0201H, YP200-06, max UDMA/100
ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0211, max UDMA/33
ata1.00: 39179952 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0201H YP20 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39179952 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 500, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): orphan cleanup on readonly fs
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 212034
EXT4-fs (sda3): 1 orphan inode deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
udev: starting version 146
intel_rng: FWH not detected
Linux agpgart interface v0.103
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
input: PC Speaker as /devices/platform/pcspkr/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
lp: driver loaded but no devices found
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (58 C)
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
NET: Registered protocol family 23
usb 2-2: new full speed USB device using uhci_hcd and address 2
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: AC Adapter [AC] (on-line)
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
usb 2-2: configuration #1 chosen from 4 choices
lp0: using parport0 (interrupt-driven).
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:0c: disabled
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input6
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1IET69WW (2.08 ), EC 1IHT20WW-1.07
ACPI: Battery Slot [BAT0] (battery present)
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
ppdev: user-space parallel port driver
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000006
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd0202000, irq 11, MAC addr 00:0d:60:37:df:cb
b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.1: Socket status: 30000006
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
fuse init (API version 7.12)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
psmouse serio2: ID: 10 00 64
EXT4-fs (sda3): internal journal on sda3:8
EXT4-fs (sda4): barriers enabled
kjournald2 starting: pid 2051, dev sda4:8, commit interval 5 seconds
EXT4-fs (sda4): internal journal on sda4:8
EXT4-fs (sda4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
usb 2-2: USB disconnect, address 2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
Clocksource tsc unstable (delta = -78033180 ns)
oss_ich 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver oss_usb
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1e:e5:79:4e:41
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:79:4e:41
wlan0: RX AssocResp from 00:1e:e5:79:4e:41 (capab=0x11 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 4 choices
Consoledump from an openGL game:
[nick@myhost nick]# tremulous
tremulous 1.1.0 linux-x86 Mar 17 2009
----- FS_Startup -----
Current search path:
/root/.tremulous/base
/opt/tremulous/base/vms-1.1.0.pk3 (4 files)
/opt/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
/opt/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
/opt/tremulous/base/map-transit-1.1.0.pk3 (135 files)
/opt/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
/opt/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
/opt/tremulous/base/map-karith-1.1.0.pk3 (118 files)
/opt/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
/opt/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
/opt/tremulous/base/data-1.1.0.pk3 (1229 files)
/opt/tremulous/base
2080 files in pk3 files
execing default.cfg
couldn't exec autogen.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
------- Input Initialization -------
Joystick is not active.
...loading libGL.so.1:
Calling SDL_Init(SDL_INIT_VIDEO)...
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode 3: 640 480
Using 8/8/8 Color bits, 24 depth, 8 stencil display.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
Initializing OpenGL extensions
...GL_S3_s3tc not found
...ignoring GL_EXT_texture_env_add
...using GL_ARB_multitexture
...using GL_EXT_compiled_vertex_array
GL_VENDOR: Tungsten Graphics, Inc.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
GL_VERSION: 1.3 Mesa 7.6
GL_EXTENSIONS: GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
GL_MAX_TEXTURE_SIZE: 2048
GL_MAX_ACTIVE_TEXTURES_ARB: 3
PIXELFORMAT: color(24-bits) Z(24-bit) stencil(8-bits)
MODE: 3, 640 x 480 fullscreen hz:N/A
GAMMA: hardware w/ 0 overbright bits
CPU:
rendering primitives: single glDrawElements
texturemode: GL_LINEAR_MIPMAP_LINEAR
picmip: 0
texture bits: 0
multitexture: enabled
compiled vertex arrays: enabled
texenv add: disabled
compressed textures: disabled
Initializing Shaders
...loading 'scripts/uncreation.shader'
...loading 'scripts/q3map2_tremor.shader'
...loading 'scripts/tremor.shader'
...loading 'scripts/transit.shader'
...loading 'scripts/niveus.shader'
...loading 'scripts/nexus6.shader'
...loading 'scripts/karith.shader'
...loading 'scripts/atcs.shader'
...loading 'scripts/arachnid2.shader'
...loading 'scripts/jetpack.shader'
...loading 'scripts/core.shader'
...loading 'scripts/flame.shader'
...loading 'scripts/misc.shader'
...loading 'scripts/common-trem.shader'
...loading 'scripts/titan.shader'
...loading 'scripts/water.shader'
...loading 'scripts/displays.shader'
...loading 'scripts/plant_life.shader'
...loading 'scripts/stasis.shader'
...loading 'scripts/booster.shader'
...loading 'scripts/eggpod.shader'
...loading 'scripts/medistat.shader'
...loading 'scripts/mgturret.shader'
...loading 'scripts/reactor.shader'
...loading 'scripts/telenode.shader'
...loading 'scripts/trapper.shader'
...loading 'scripts/overmind.shader'
...loading 'scripts/tesla.shader'
...loading 'scripts/dcc.shader'
...loading 'scripts/hive.shader'
...loading 'scripts/level2.shader'
...loading 'scripts/human.shader'
...loading 'scripts/null.shader'
...loading 'scripts/weapons.shader'
...loading 'scripts/conkit.shader'
...loading 'scripts/advckit.shader'
...loading 'scripts/psaw.shader'
...loading 'scripts/mdriver.shader'
...loading 'scripts/flamer.shader'
...loading 'scripts/crosshairs.shader'
...loading 'scripts/grenade.shader'
...loading 'scripts/splash.shader'
...loading 'scripts/marks.shader'
...loading 'scripts/sprites.shader'
...loading 'scripts/muzzleflashes.shader'
----- finished R_Init -----
------ Initializing Sound ------
Initializing SDL audio driver...
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
SDL audio driver is "dsp".
SDL_AudioSpec:
Format: AUDIO_S16LSB
Freq: 22050
Samples: 512
Channels: 2
Starting SDL audio callback...
SDL audio initialized.
----- Sound Info -----
1 stereo
16384 samples
16 samplebits
1 submission_chunk
22050 speed
0xa4241f8 dma buffer
No background file.
Sound intialization successful.
Sound memory manager started
Loading vm file vm/ui.qvm...
...which has vmMagic VM_MAGIC_VER2
Loading 1075 jump table targets
VM file ui compiled to 786313 bytes of code
ui loaded in 4596672 bytes on the hunk
UI menu load time = 705 milli seconds
UI menu load time = 55 milli seconds
UI menu load time = 51 milli seconds
--- Common Initialization Complete ---
Opening IP socket: localhost:30720
Hostname: myhost.localdomain
Alias: myhost
IP: 127.0.0.1
Started tty console (use +set ttycon 0 to disable)
*********************************WARN_ONCE*********************************
File radeon_tcl.c function radeon_run_tcl_render line 499
Rendering was 734 commands larger than predicted size. We might overflow command buffer.
----- CL_Shutdown -----
Closing SDL audio device...
SDL audio device shut down.
RE_Shutdown( 1 )
----- CL_Shutdown -----
Shutdown tty console
[nick@myhost nick]#
Display all 3035 possibilities? (y or n)

radionecrotic wrote:
Has this always been the case for you or did you update recently and it started happening? There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting. See http://bbs.archlinux.org/viewtopic.php? … 47#p659347. I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all. I don't run anything that uses OpenGL so I don't know if it'll address your issue.
You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/

How can I make my whole site in fullscreen (API) mode, not just the opening page?

I'm building a site that consists only of static pages, no scrolling, and I want the whole site to be in fullscreen mode. I know it's not good manners on the internet to have a whole site in this mode but it's a site with art and music and I really have a reason to have it this way.
I've been doing a lot of searching and I've got the fullscreen API to work for me, but just on that one particular page. I want it to stay fullscreen even when I go to another page on the site.
Maybe I've been doing this wrong somehow and the script is supposed to work that way but I've not been able to make it work.
Thanks in advance
db

Thanks so much for your quick replies.
The thing is I designed the site and tested it on a lot of different screen resizer plugins and it looked good.
What I did not count on was the space you lose with the dock. The content just gets too small on a 1366x768 for example.
Nancy, with "This allows content to fit the available viewport.", you mean the browser window? I've already built it that way.
Jon, ok so I was right about the API not working on whole sites then but it does have the the opputunity to make a single page fullscreen though.
Though I want the fullscreen mode on IE as well, I don't think the interface elements take that much space on windows computers and
maybe I won't have to use fullscreen there. This site is also not designed to work on mobiles so no issue there.
I have been thinking about some alternatives:
1. Some kind of workaround that you mention Nancy, but I haven't found any.
2. Have the visitors push a key to get into fullscreen but it seems that there is no equivalent to the F11 on mac, just different shortcuts for
different browsers. Or have I missed something here?
3. Make the next page open up in an iframe but it just slows down the loading of the page.

How can I prevent the softKeyboard from going full screen in landscape mode on mobile app?

When I put an Input TextField on stage in an ActionScript Mobile project and click on it, the softkeyboard comes up but behaves differently when in portrait or in landscape. In portrait, the softkeyboard comes up and allows me to edit my field without hiding. In Landscape, the softkeyboard goes into fullscreen mode and I can no longer see my app in the background. I would like for Landscape mode to bring up the softkeyboard but not overlay my app with a text area. Is there a way to configure this?

My app runs in landscape and I hated the default Android behavior so I used a heavily customized virtual keyboard instead. It's a bit slow but it works:
https://code.google.com/p/as3-virtual-keyboard/

Switch to fullscreen in a desktop app which is running windowed

I have a desktop application that runs with a transparent masked border, so since it's not a fullscreen application i have <fullScreen>false</fullScreen> in the app descriptor. BUT I'd like to be able to switch to fullscreen mode in some instances. I try to do so with:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
But this doesn't seem to work. The app is still not fullscreen after issuing that line. I suppose it's because of the descriptor, but if I set <fullScreen>true</fullScreen> the app will start fullscreen, which I don't necessarily want (usually it's a windowed application with transparent chrome).
So is this possible?
Thanks!

I have a desktop app using <fullScreen>false</fullScreen> in the app descriptor and have no problems switching between fullscreen mode or windowed mode just by setting stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE; or stage.displayState = StageDisplayState.NORMAL;
There may be something else at play causing the fullscreen mode to fail.

Presentatsion with videos, can't get it working on fullscreen.

Hi
Happy new year guys:)
I made a flash presentatsion and because i'm using FlashEff components it has to be in as3. I'm a total newbie in coding, particularly in as3. I have made my presentatsion in as3 before and got everything working fine. This time my presentation contains videos. And this becomes a problem when going on fullscreen mode. My project size is 1024x768, I made a html and use a brauser to open it. I wan't my project to go fullscreen so that there aren't borders.
If the stage goes fullscreen i don't want my movies to go fullscreen. When playing a video on fullscreen mode everything just goes black. Soo finally i figured out that i have to tell the videos not to scale.
My project is set up as follows:
1. MAIN TIMELINE
On the first layer i have all the frames converted to movieclips and inside each movieclip is the content.
On the as layers first frame i have this code. This is for navicating on the presentatsion slides with arrow keys.
stage.addEventListener(KeyboardEvent.KEY_UP, goNextFrame);
function goNextFrame(event:KeyboardEvent):void
if (event.keyCode == Keyboard.UP)
this.nextFrame();
stage.addEventListener(KeyboardEvent.KEY_DOWN, goPrevFrame);
function goPrevFrame(event:KeyboardEvent):void
if (event.keyCode == Keyboard.DOWN)
this.prevFrame();
2. INSIDE THE MOVIECLIP
On each slide there is some content that is called with a mouse click.
//On the fist frame
bg_mc2.addEventListener(MouseEvent.CLICK, playSlide);
bg_mc2.buttonMode = true;
function playSlide(event:Event):void
play();
//On the last frame
stop();
bg_mc2.mouseEnabled = false;
I have tried so many fullscreenmode - don't scale the video codes.
I have tried so many ways but every time i play a video i get the typeerror 1009 Can't access a property of method.
What does this mean?
Is there a

Hi
Happy new year guys
I managed to get the flvs on fullscreen and running. This code prevents it from taking over the screen: myPlayer.fullScreenTakeOver = false;. But when i try to move this code(keyframe) along with the flv(keyframe) farther, the code doesn't work anymore. Why is that? This is really a problem, beacause i have some animation before the video starts to play.
For going fullscreen i found this toggle on/off button code
function toggleFullScreen(event:MouseEvent):void
if (this.stage.displayState == StageDisplayState.FULL_SCREEN)
this.stage.displayState=StageDisplayState.NORMAL;
else
this.stage.displayState=StageDisplayState.FULL_SCREEN;
myButton.addEventListener(MouseEvent.CLICK, toggleFullScreen);
function onFullScreen(fullScreenEvent:FullScreenEvent):void
var bFullScreen=fullScreenEvent.fullScreen;
if (bFullScreen)
else
this.textField.text=this.stage.displayState;
myButton.stage.addEventListener(FullScreenEvent.FULL_SCREEN, onFullScreen);
But i get this error
TypeError: Error #1010: A term is undefined and has no properties.
    at PRESENTATSIOOn_fla::MainTimeline/onFullScreen()
    at flash.display::Stage/set displayState()
    at PRESENTATSIOOn_fla::MainTimeline/toggleFullScreen()

How to use interactive-fullscreen instead of fullscreen in Spark videoPlayer?

Hi All,
I'm trying the new videoPlayer component in Flash builder and want to use it in AIR application.
When i press the fullscreen button i get into regular fullscreen (with no keyboard).
Is there a way i can get into interactive fullscreen when pushing the videoPlayer fullscreen button?
Thanks in advance,
Lior

Have a look at the code for the VideoPlayer.as its not that straight forward to override the behaviour.
fullScreenButton_clickHandler(event:MouseEvent):void (line 1808 in latest sdk)
there is a note inside the source - maybe raising a request on the adobe bug site for the SDK would be a good idea..
// FIXME (rfrishbe): Should we make this FULL_SCREEN_INTERACTIVE if in AIR?
systemManager.stage.displayState = StageDisplayState.FULL_SCREEN; (line 1872)

Help about importing files and fullscreen mode

Hi,
sorry but i'm kinda new about this. I'm creating a kiosk for my company which uses a touchscreen PC like what you see in the malls right now i.e directory. Im using flash cs5 and AS3. My problem is when I imported video / swf file in my stage (which is in full screen when loaded in projector), the video / swf file automatically change to full screen also. What I like to do is even if my window is in full screen mode, the video will still be the same what I set it to be. For you to imagine what im doing is in my homepage, my buttons would be video/swf files placed side by side. Once I click on one video it will go to another scene just like a website. I tried to google about this but no luck, all i find is how to import. These are the codes i used to load my project in fullscreen mode automatically.
var main:Stage = this.stage;
main.scaleMode = StageScaleMode.NO_SCALE;
main.scaleMode = StageScaleMode.EXACT_FIT;
main.align = StageAlign.TOP;
main.displayState = StageDisplayState.FULL_SCREEN;
Hope you can help me on this. Thanks in advance for those who will help.
Thank you
-Arjae

thanks andrei. but it still doesn't solve my problem.
var main:Stage = this.stage;
main.scaleMode = StageScaleMode.NO_SCALE;
//main.scaleMode = StageScaleMode.EXACT_FIT;
main.align = StageAlign.TOP;
main.displayState = StageDisplayState.FULL_SCREEN;
as u have said, i remove scale_fit line but still in full screen. when I run s swf file the video automatically converted to full screen. what i only want to make full screen is the stage where the video is located. is there some command i need to do on this? I tried to use this using AS2 and its ok, the video didn't go full screen even the stage itself is in fullscreen. but i really want to use AS3 because of some features. If you can help, it will be great. Thanks lot!

FB 4.7 Mobile

I am currently using FB 4.7 with AIR 3.4 and 3.5 (both tested). (just starting with FB4.7 moving from 4.6)
When I run the application or AIR Simulator, iOS Simulator and android device, the app Y position does not start on 0.
It reports it on 0 (in the trace) but the app is several pixels below.
Here is a screen shot of a text field at 0,0
code is simple:
package
    import flash.display.Sprite;
    import flash.display.StageAspectRatio;
    import flash.events.Event;
    import flash.system.Capabilities;
    import flash.text.TextField;
    import flash.text.TextFormat;
    public class SimulationTest extends Sprite
        public function SimulationTest()
            super();
            var appInfo:String = String(stage.fullScreenWidth + " , " + flash.system.Capabilities.screenResolutionX);// flash.system.Capabilities.version;
            trace(appInfo);
            trace(this.x + " , " + this.y);
            var text:TextField = new TextField();
            text.x = 0;
            text.width = 100;
            text.y = 0;
            var tf:TextFormat = text.defaultTextFormat;
            tf.size = 24;
            text.defaultTextFormat = tf;
            text.text = appInfo;
            addChild(text);
I tried adding a sprite or a movieclip at 0,0 and same result.
I also tried with <fullScreen> true and false
and also <requestedDisplayResolution> high and standard.
Anything else I might be doing wrong?

opening an Actionscript mobile project in FB 4.6 sets the stage scaling and alignment:
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
By default 4.7 does not do that and that was my weird error
I feel a bit dumb though and tahnks for your time.

AIR Fullscreen AND Show_All

Hi, everybody
I'm trying to resolve this problem.
I am developing a AIR application with the following attributes: FULLSCREEN and then stage to EXACT_FIT (without trying to preserve the original aspect ratio).
The full screen is ok but the content of the stage appears cut out in approximately 1/4 of its area.
Can anybody help me?
Thank´s for any help.
Carlos Lopes.
My code is:
<mx:WindowedApplication
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="fFullscreen()"
horizontalAlign="center" verticalAlign="middle" clipContent="false" backgroundColor="#E1C787">
<mx:Canvas width="620" height="480" backgroundColor="#FFFFFF" x="209" y="73">
</mx:Canvas>
<mx:Script>
<![CDATA[
import flash.display.StageAlign;
import flash.display.StageScaleMode;
public function fFullscreen():void {
stage.displayState = StageDisplayState.FULL_SCREEN;
stage.scaleMode = StageScaleMode.SHOW_ALL;
]]>
</mx:Script>
</mx:WindowedApplication>

Hi, everybody
I'm trying to resolve this problem.
I am developing a AIR application with the following attributes: FULLSCREEN and then stage to EXACT_FIT (without trying to preserve the original aspect ratio).
The full screen is ok but the content of the stage appears cut out in approximately 1/4 of its area.
Can anybody help me?
Thank´s for any help.
Carlos Lopes.
My code is:
<mx:WindowedApplication
xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" applicationComplete="fFullscreen()"
horizontalAlign="center" verticalAlign="middle" clipContent="false" backgroundColor="#E1C787">
<mx:Canvas width="620" height="480" backgroundColor="#FFFFFF" x="209" y="73">
</mx:Canvas>
<mx:Script>
<![CDATA[
import flash.display.StageAlign;
import flash.display.StageScaleMode;
public function fFullscreen():void {
stage.displayState = StageDisplayState.FULL_SCREEN;
stage.scaleMode = StageScaleMode.SHOW_ALL;
]]>
</mx:Script>
</mx:WindowedApplication>

No fullscreen? Seriously???

Is there any feature more standard on any software intended to display anything? Is there any activity less in need of a GUI than reading a book?
This software is sorely lacking in options to make PDFs adaptable to the wide variety of displays likely to be used for leisure reading, rendering the whole value of retaining the original page layout moot. The lack of rotation means that the obvious orientation desired for small, widescreen laptops must be supplied by a third party, and the persistence of the GUI means that 1/4 of the display area is wasted for a typical hardcover in full-page view on such a device, leaving some texts effectively unreadable (I for one don't find panning, scanning and scrolling very immersive).
What's more, it requires too many operations to reach the point where you're actually reading a book. With FBReader (not a competitor, as it can't read DRM), it's four keystrokes and maybe 20 seconds from sleeping laptop to fullscreen and ready-to-read. With ADE, I have to maximize the window, close the left pane, and rotate my desktop each and every time.
This software was clearly designed for managing the DRM, with reading as an afterthought, most likely by people who have never read an ebook in their lives. Small-scale laptops and tablets are the only mobile devices capable of displaying these files faithfully, and Adobe has completely failed to support them.

Yes would have to agree. We have gotten used to simple full screen or detailed views with pdf viewers and Adobe is no stranger to displaying them. It does appear that the publishers legal department were the primary users in mind when the functionality was being agreed.

Mobile: fullscreen vs StageDisplayState

Similar Messages

Maybe you are looking for