Mobile WMS Pick Load - Question in MWA application

Hi ,
I am not very much familiar with OAF, MWA technologies. I am given a requirement as detailed below. Please help me with the solution.
In the page "Mobile WMS Pick Load" , there are some fields like Sub Inventory, Item, Req_Qty etc fields and all of them have a "Confirm" field for each of them.
But there is a field called "Xfer LPN" but there is no "Confirm" field for that. My customer wants to have "Confirm" field for "Xfer LPN".
So I tried to look at the field definitions and noticed that there is a field "MAIN.XFER_LPN_CONFIRM" field. So I checked the properties for this filed. Especially, the "Rendered" is set to True. But this fioeld is not seen on screen.
So My question to you is :
1) Is that teh correct fieeld that captures the "Confirmation" for the Xfer_LPN"? If so, why is it not displayed on the screen inspite of the "endered " is set to True?
2) How can we meet this requirements?
Please help me with this issue. Thanks
Regards,
..

Rather than directly answering to this question, we will first understand the requirement.
Why we need a confirm field for Subinventory and locator etc.
- Whenever you do picking, the pick rules suggest you the sub, loc etc on the mobile screen. Now the picker need to confirm the above details to say the system that he is ok with the suggestions that are shown on the mobile screen. In some cases, they may need to override the suggestions suggested by the system. To allow that, we are having one extra field to confirm all the details that got populated automatically.
whereas in your case it is xferLPN field which is already an editable field. Except in few cases, this field won't get the value populated. User need to enter the details manually. If system suggests the value but the picker need to override, then we can do it on the same field. So there is no question of having one extra field to confirm the XferLPN.
Thanks,
Kamesh,
Senior Consultant,
Intelligroup

Similar Messages

Infopackage-Load Many Files from Application Server and later Archive/Move

Hi All..
I have a doubt,   I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
-     How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
-     In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
          p_filename =
          p_subrc = 0.
Thank you for your ideas or recommendations.
Al

Hi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al

How do i insert a splash screen or a loading screen and a application image for a phone app on Dream

How do i insert a splash screen or a loading screen and a application image for a phone app on Dreamweaver 6, 5.5 had the mobile application setting that is seemingly no longer present? and i also heard you can use animanted backgrounds on the mobile application in dreamweaver 6 but figuring out how to set the splash screen and application image like it was in 5.5 would be nice. All i can get to pull up is the web application i developed i am trying to build into a phone app on google chrome, if i could officially designate it as a phone app where i can set each splash screen and app image to where it is recognized as a phone app that would be really nice.

Duely noted, the server will still not connect, so i have left an inquery in the suggested forum.
Date: Mon, 15 Oct 2012 07:37:34 -0600
From: [email protected]
To: [email protected]
Subject: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    Re: How do i insert a splash screen or a loading screen and a application image for a phone app on Dream
    created by David_Powers in Developing server-side applications in Dreamweaver - View the full discussion
jmed0411 wrote: the phonegap program loads for quite some time and eventually reaches to the unfortunate conclusion that the server cannot be reached and to please try again. Any ideas on how that problem can be mended if the solution is in my hands?? I haven't used PhoneGap Build recently, but I have seen several reports about problems connecting to the server. One suggestion that I've heard is that there has been unexpectedly high demand on the server since the launch of Edge Tools and Services as part of the Creative Cloud last month. As far as I know, the only thing you can do is wait, and try again later. You could also try posting in the PhoneGap Build forum: http://community.phonegap.com/nitobi/products/nitobi_phonegap_build.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4774799#4774799
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4774799#4774799
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4774799#4774799. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Developing server-side applications in Dreamweaver by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Multiple base load in same Hyperion Application

Need to have some clarity over the multiple base load in same Hyperion application. Just to give some background of the requirement our current HFM application captures the base level data in Indian GAAP reporting structure only just like any other incorporation would do in their statutory reporting format. Now we are looking at prospects and possible impact of capturing, at base level data, both as per Indian GAAP and IFRS formats- both being active but populated by different end users.
We would like to receive some valuable inputs as to how feasible it is to capture at base level, financials of different GAAP as part of same application substantiated by an example, if any. In other words what could be the possible challenges and adverse impact because of the the multiple base load. One such impact which I could foresee could be handling of business rules and validations for different base load in the same rule file.
Please provide your valuable inputs on the same.

To clarify the question:
the query asks for multiple base loads - i.e Base / Lowest level data being loaded into the application (loaded thru FDM, Data Forms etc - and not Journals/Adjustments), both for Indian GAAP and IFRS, parallely
The requirement is to specifically load both Indian GAAP and IFRS as base level information - to enable both reporting journeys, in the same application.
i.e:
- 1 base load in Indian GAAP, with related IFRS adjustments to reach financials as per IFRS requirement
- 1 base load in IFRS, with related Indian GAAP adjustments to reach financials as per Indian Gaap requirements
Both hierarchies - operating within the same application - but for two different set of entity hierarchies, for two different end-user groups, with different reporting timelines.
What are your inputs, from a Best Practice approach - whether to develop such structures as part of the same application or go for separate applications - from a design, development, testing and ongoing maintenance perspective
Edited by: Indraneel Mazumder on Feb 19, 2013 7:41 PM

Using Web Cache to Load balance Forms Server application.

Hello,
I apologize for cross posting this question in the Forms and Caching Services forum. But I thought my question will have a better chance.
I have read that it's possible to use Oracle Web Cache as a software load balancer between multiple Application Servers.
We are running Oracle9iAS R1.0.2.2.2a, with Forms/Reports6i servers on 2 Win2k boxes i.e our Forms6i application is deployed on two seperate boxes in two distinct locations. Users at each location, use their respective App Server url.
Since the application is the same i.e. Forms6i code/fmx is the same for both locations, I am looking into loadbalancing and failover capability that Web Cache might be able to provide.
I AM ONLY LOOKING AT THE LOADBALANCING & FAILOVER capabilities and NOT caching.
So basically all users from both locations will point their browser to this Web Cache and the Web Cache will direct each connection to either of the two boxes. So, if either of the boxes dies, Web Cache will divert the requests to the other box.
My concern is whether Web Cache supports this for the Forms requests that it will receive from the users. We are using Servlet Deployment of Forms, so technically, all communication is going though the HTTPD.
Has anyone done this or has any ideas as to whether it's going to work or not? Oracle's FAQ insists that Forms is not supported. But I want to make sure that even loadbalancing is not supported. And if not supported then is there any other solution.
Any comments appreciated.
Thanks,
Manish

Using Web Cache to load balance servlet-based Forms (6i and 9i) is unofficially supported. I say "unofficially" because we have actual customers doing it and getting support, but the 2 development teams (Forms and Web Cache) haven't actually done any integration testing of this sort of configuration yet. For your case, please contact your Support rep and ask what was done to use Web Cache as a load balancer for Forms6i at METRO in Germany. The Forms product managemment team is writing up a white paper to describe how to do it, but until then, you'll need to go through Support. Please contact me if you want more information.

"Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode" when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

"Error code 0xc000035a Attempting to load a 64-bit application, however this cpu is not compatible with 64-bit mode"
when I load Windows 7 [64bit] on an older iMac(with Parallels 6)? Any solutions that don't mean buying a new iMac?

You should probably post your question on the Parallels forums: http://forums.parallels.com

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Unable to load catalog in CRS application. Indexing is failed

Unable to load catalog in CRS application, Indexation failed: Below is the error msg
**** Error /atg/dynamo/service/jdbc/JTDataSource Unable to connect to data source because of SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'ATGProductionDS_base_domain': XAER_RMERR : A resource manager error has occured in the transaction branch
**** Error Mon Apr 21 10:35:29 IST 2014 1398056729516 /atg/dynamo/service/jdbc/JTDataSource weblogic.transaction.internal.ResourceAccessException: Transaction has timed out when making request to XAResource 'ATGProductionDS_base_domain'.
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:670)
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1230)
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1164)
Caused by: weblogic.transaction.internal.TimedOutException: Transaction has timed out when making request to XAResource 'ATGProductionDS_base_domain'.
**** Error /atg/dynamo/service/jdbc/JTDataSource at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:673)
**** Error /atg/dynamo/service/jdbc/JTDataSource
In Dyn Admin "atg/commerce/search/ProductCatalogOutputConfig" is failed
"atg/commerce/endeca/index/CategoryToDimensionOutputConfig" is failed

This issue is related to weblogic transaction timeout.
Can you increase the weblogic domain transaction timeout?
By default it is 30 sec, increase to 600
Refer Domain --&gt; Configuration --&gt; JTA to increase timeout.
Peace
Shaik

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.

The me.com website is not designed for or intended to be accessed by iOS devices. Apple provides support in iOS or seperate Apps for accessing all aspects of MobileMe except for the Accounts section.
Use MobielMe as intended and you'll have no problems.
See: http://support.apple.com/kb/ts1673
Even if you use a different browser to get access to me.com on iOS, you'll find most of it is unusable.
Other websites that present you with the mobile version have been programmed to do so by their developers. They specifically look for users accessing from 'mobile' devices and switch to the mobile site. Many such sites provide a link to go back to the 'full' site, if not, there's not a lot you can do except use a browser that can pretend not to be a mobile browser.

Error in loading package in the application

Hi all,
We are getting an error in loading packages in our application.We are using oc4j.
The following is the error message we got.
Not Found
The requested URL /credit/pls/cnhcalms/add_new_customer.handleAction was not found on this server.
Thanks in advance.

Hi Rajat:
Thank you for the reply.
I had the xercers jars in jdk/jre/lib/endorsed directory.
If I remove these, the ejbql works. I do need these in there for a different reason. Is there any way I can have the xercers jars in jdk/jre/lib/endorsed directory and still the ejbql work on oc4j.
Thanks,
Sabu

How to Load Sound In Java Application?

Hi, i dunno what the codes to load sound in java application, can anyone help me and provide me with the codes? Thanks a lot.

http://search.java.sun.com/search/java/index.jsp?qp=&nh=10&qt=%2Btitle%3Aapplication+%2Btitle%3Asound&col=javaforums
BTW: You can doo this yourself

I did the recommended re-install to resolve the missing MSVCR80.dll file. This worked, but I am now stymied by two error messages: "Apple Mobile Device failed to start" and "Apple application support not found". How to overcome?

That worked, however I now get two error messages when I install I Tunes:
o Apple Mobile Device failed to start.
o Apple Application Support not found.
This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Picking of Adobe forms from application server

Hi Gurus
We have SAP ECC 6.0. So far in our system we have text files and CSV excel files which comes from external system and lies in application sever and these are being picked up automatically by system and gets processed in SAP.
1)The requirement is to "pick the adobe forms from application server and read some fields in the form and update the fields (required) in customer master data in SAP". How can we achieve this?
Any kind of help is appreciated.
Thanks
Aleem

Hi Aleem,
I tried to work on a similar scenario couple of months back. But it was not successful. Will you please let me know if you get any solution???
Thanks in advance
Poornima

Loading metadata into EPMA applications using Interface tables-Automation

Hi,
I am loading the metadata into epma applications using interface tables as ODI dont perit to load metadata into epma applications. Is there any way of using ODI and interface tables together to load the metadata
This process also need to be automated.

Hi,
It is certainly possible and has be done, though there is not anything available that will do it for you, you will have to put in some effort learning the structure of the interface tables, then build interfaces and then a package in ODI to streamline the process.
Cheers
John
http://john-goodwin.blogspot.com/

Loading metadata into HFM application through EPMA - Beginner

Hello,
I have an HFM application which was created in a classic format and then later on converted to EPMA. I would like add more metadata in it now either manually or any other way. I tried to create a few members manually through dimension library but when I see it in the actual application, the members are not seen. Is there anything else to do like deploying it or anything? It would be great help if anybody could tell me how to add members manually and in bulk.
Thanks

Yes. You'll need to deploy the application to see the changes outside of EPMA. Since EPMA is your metadata management tool now, you'll make the changes there, and then deploy (or load) it to the application. There are several ways to make metadata changes in EPMA:
1) Directly in the Dimension Library as you have done
2) Using the Grid Editor functionality in the Dimension Library (right-click any dimension label and you'll see the option)
3) Using the EPMA File Generator (this is best for building new apps and regularly occurring changes)
4) Using LCM (this is my preference for bulk changes)
Shoot an email to the address in my profile and I'd be happy to get you some further info.

Mobile WMS Pick Load - Question in MWA application

Similar Messages

Maybe you are looking for