Mod_rewrite not working for virtual host nor .htaccess

I've been tearing my hair out trying to implement mod_rewrite on my Leopard Server. I have finally been able to get mod_rewrite to log what it does, but that has only shown that it DOES periodically respond to a /server_status request from the server itself, but any request to the virtual host (which is otherwise working) does not result in mod_rewrite being 'triggered.' I've tried all the usual suspects, in just about every permutation and combination: 
1) .htaccess in all its guises and Override All;
2) RewriteEngine On;
3) http.conf, the virtual xxxx_80_virtualhostname.com.conf;
4) Options All -Includes -ExecCGI +MultiViews -Indexes +FollowSymlinks;
5) other less credible ideas gleaned from the Apple discussions and the web.
If I had to summarise the effect, it's that
a) mod_rewrite is on (as shown by the regular /server_status entries in the rewrite.log);
b) xxxx_80_virtualhostname.com.conf is read when the virtual host is turned on (because the site is active and can be turned off, at will);
c) any mod_rewrite and Options entries in the vistual host xxxx_80_virtualhostname.com.conf seem to be being studiously ignored, even though the .conf file is being read and used.
This part of http.conf is what seems to turn on the logging:
<IfModule mod_rewrite.c>
     RewriteEngine On
     RewriteLog /private/var/log/apache2/rewrite.log
     RewriteLogLevel 9
</IfModule>
Here's the section of xxxx_80_virtualhostname.com.conf:
<Directory "/Library/WebServer/com.VirtualHostName">
     AllowOverride All
     <IfModule mod_dav.c>
          DAV Off
     </IfModule>
     Options All -Includes -ExecCGI +MultiViews -Indexes +FollowSymlinks
</Directory>
<IfModule mod_rewrite.c>
     RewriteEngine On
     RewriteLog /private/var/log/apache2/rewrite.log
     RewriteLogLevel 9
     RewriteRule ^/Tom.html$ /Mary.html [R]
     RewriteCond %{REQUEST_METHOD} ^TRACE
     RewriteRule .* - [F]
</IfModule>
This is a variant of the .htaccess file:
RewriteEngine on
RewriteBase /
RewriteRule ^/Tom.html$ /MARY.html [R]
It makes no difference whether the RewriteBase is present in the .htaccess or the xxxx_80_virtualhostname.com.conf, or both.
No amount of pass-though [PT] or redirect [R] has any effect, either.
I do have Lasso 8.5 installed, but the developer says that Lasso should have no effect on the proper functioning of mod_rewrite.
mod_rewrite is working (i.e. it's on, as shown by the /server_status entries in the log and that the log is being updated), but it is also not working (in that no matter what I put into xxxx_80_virtualhostname.com.conf and/or .htaccess, there is no entry in the rewrite.log nor in the system logs).
Hence, I'm stumped. Any suggestions would be very, very welcome.

Never mind. I discovered that Server had created several versions of the virtual host .conf file in the sites folder (I've no idea why, when, or how it would do that). They all had different numbers and so were well hidden within the dozens of other .conf files. Once I a) found the right .conf file for the virtual host, and b) deleted the rest from the sites folder, my mod_rewrite code worked fine.
Hence, if you find that mod_rewrite is working, but not for a particular virtual host, make darn sure that there are no errant .conf files for the domain and, if there are, that you're editing the correct one.

Similar Messages

  • Http tunnelling not working with virtual host

    Hi,
    We have recently migrated our application from OC4J server to the Weblogic 11g server. There is one EJB client module which connects using t3 protocol. We are trying to use Http Tunneling for it. The server setup consists of two machines (machine1.global.com and machine2.global.com) in clustered mode. A virtual host cbs.global.com is configured to load balance across the above 2 two machine. Also Apache HTTP Server plugin is used for handling the web tier.
    For enabling tunneling, we have checked the 'Enable HTTP Tunneling' check box in the server. Also in the Httpd.conf file, we have added a block for
    <Location /HTTPClnt>
    SetHandler weblogic-handler
    </Location>
    If we give the initial context url as http://machine1.global.com:7005 or http://machine2.global.com, then it is working fine. But when we give the virtual host names - http://cbs.global.com or http://cbs.global.com:7005, it is not working. This application needs to be accessed outside the company network, so we cannot directly give the machine names and have to make it work using virtual host.
    Please advise whether any other settings need to be done for enabling the tunnelling for virtual hosts.
    Highly appreciate your help in this regard.
    Best Regards,
    Jaison
    Edited by: user13152776 on Aug 29, 2011 7:00 PM

    Thanks Peter for the reply.
    We are having multiple managed servers configured to multiple ports - 7003, 7005, 7007, etc. Please find below the mod_wl_ohs.conf file
    # NOTE : This is a template to configure mod_weblogic.
    LoadModule weblogic_module "${ORACLE_HOME}/ohs/modules/mod_wl_ohs.so"
    # This empty block is needed to save mod_wl related configuration from EM to this file when changes are made at the Base Virtual Host Level
    <IfModule weblogic_module>
    # WebLogicHost <WEBLOGIC_HOST>
    # WebLogicPort <WEBLOGIC_PORT>
    # Debug ON
    # WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/weblogic.log
    # MatchExpression *.jsp
    # Dev Cluster Configuration - Port 7003
    <Location />
    SetHandler weblogic-handler
    WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
    Debug ON
    WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
    MatchExpression *
    </Location>
    <Location /intApp>
    SetHandler weblogic-handler
    WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
    Debug ON
    WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
    MatchExpression *
    </Location>
    # Ocean Cluster Configuration - Port 7005
    <Location /CQS>
    SetHandler weblogic-handler
    WebLogicCluster nooslux050d.gl.2wglobal.com:7005,nooslux051d.gl.2wglobal.com:7005
    Debug ON
    WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/oceancluster.log
    MatchExpression *
    </Location>
    # Websi Cluster Configuration - Port 7007
    <Location /si>
    SetHandler weblogic-handler
    WebLogicCluster nooslux050d.gl.2wglobal.com:7007,nooslux051d.gl.2wglobal.com:7007
    Debug ON
    WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/websicluster.log
    MatchExpression *
    </Location>
    </IfModule>
    Best Regards,
    Jaison

  • My camera will not work for Face Time nor Hangouts

    I cannot get my camera nor camera light to come on when tlakign wiht others on Face Time nor hangouts
    Can anyone guide me?
    Tried to update software
    I am on X 10.9
    the download for for the camera says you must have 10.8
    Hmmm

    Hope info from this article is helpful.
    http://support.apple.com/kb/HT2090
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.
    Best.

  • Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    No sound form :
    - Speaker?
    - Headphones?
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • For some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

    for some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

    Hello Redpanda68,
    The following article provides information and troubleshooting steps that can help get Messages and Mail working.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Cheers,
    Allen

  • Configuring default web apps for virtual hosts

    Hi,
    This posting is meant save time for anyone trying to specify a default web app
    for each of their virtual hosts (as opposed to specifying a default web app for
    each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't tried
    this on other platforms).
    If you are trying to use the admin console to do this, give up. It's not possible.
    The "Virtual Host/Configuration" window lets you specify everything about that
    vhost configuration EXCEPT a default web app. (The "Default Web Application" drop
    down menu will always have only one option to choose from: "none").
    Instead, shutdown your server, and edit your domain's config.xml file manually.
    Attached is an example config file that specifies that the web app "kz" should
    be the default web app for the vhost "wl.kz.com", and that the web app "kahuna"
    should be the default web app for the vhost "www.kahuna.com".
    Hope this helps,
    Brian O'Donnell
    Lead Developer, Learning Network
    [config.xml]

    Hi,
    Is it possible to configure default web appls for virtual hosts
    with Weblogic 6.0 on NT platform? I tried to configure the configure.xml as Brian
    did, it doesnot work. I am just wondering if there's any other possible way to
    do this.
    Thanks.
    Mei
    "Brian O'Donnell" <[email protected]> wrote:
    >
    >
    >
    Hi,
    This posting is meant save time for anyone trying to specify a default
    web app
    for each of their virtual hosts (as opposed to specifying a default web
    app for
    each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't
    tried
    this on other platforms).
    If you are trying to use the admin console to do this, give up. It's
    not possible.
    The "Virtual Host/Configuration" window lets you specify everything about
    that
    vhost configuration EXCEPT a default web app. (The "Default Web Application"
    drop
    down menu will always have only one option to choose from: "none").
    Instead, shutdown your server, and edit your domain's config.xml file
    manually.
    Attached is an example config file that specifies that the web app "kz"
    should
    be the default web app for the vhost "wl.kz.com", and that the web app
    "kahuna"
    should be the default web app for the vhost "www.kahuna.com".
    Hope this helps,
    Brian O'Donnell
    Lead Developer, Learning Network

  • MAM application is not working for some users

    Hi All,
    Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
    If I use different user on the same device I can see the MAM application and MAM data.
    What could be the wrong in this case. Any help would be highly appreciated.
    Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
    Middleware:SAP NetWeaver 2004s with Patch leve 15
    Backend:SAP ECC 6.0
    Application:MAM 3.0
    Thanks and Regards,
    Ameer.

    Hi,
    from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
    For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
    You need to solve this before you can go any further.
    Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
    Regards,
    Larissa Limarova

  • Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error

    Hi, My face time is not working properly in my computer and mi iPhone, some of the people that i used to contact a can't talk to anymore, and some i can. Its not working in my mac nor in my iPhone, it just shows legend that says face time error, what can i do???

    Assign an email address (gmail.com?)
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • IWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    iWeb is not working for sending podcasts to iTunes, so I need a new web building tool. What is the closest thing to iWeb that I can use, which also supports podcasts?

    There's no reason you can't go on using iWeb for this - with iWeb '08 you have to publish to a local folder (i.e. on your Mac) and then upload the contents of the folder (not the folder itself) to your hosting service: and you have to make sure you enter the new URL in the Publish information or the feed won't work properly; this done, an iWeb podcast should work fine.
    Of course there is still the problem that iWeb is not supported and sooner or later a system upgrade may break it. You could look at RapidWeaver: you can make podcasts with that, though the last time I looked into that - which was admittedly some time back - I didn't feel it was ideal for this. There are lots of other podcast creation programs or services around. WordPress is OK but it may be a bit of a steep learning curve: Libsyn is an online service that seems to work reliably. Blogger writes messy feeds but does usually work. Podcast Maker used to work well - I used it myself a few years back - but it rather looks as if it's gone moribund and it may not be reliable with Lion/Mountain Lion, so you would want to check into that.

  • Out of office replies in Exchange 2013 not working for external recipients

    Hi,
    Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
    I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
    to be on vacation.
    HARED... SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    RECEIVE  SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    DROP     ROUTING 
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    AGENT... AGENT    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    HARED... SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    RECEIVE  SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    AGENT... AGENT    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    TRANSFER ROUTING  [email protected]           
    {[email protected]}             Automatic reply: vacation test
    FAIL     SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test

    Hi Informus,
    Please check if it is allowed in AllowedOOFType of the Remote Domain *
    In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
    To get the currently configured Remote Domains, use:
    Get-RemoteDomain
    Name                           DomainName                                  
    AllowedOOFType
    Default                        *                                           
    External
    Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
    AllowedOOFType     : External
    AutoReplyEnabled   : False
    AutoForwardEnabled : False
    To change the settings, use the Set-RemoteDomain command.
    Enable automatic replies
    Set-RemoteDomain -AutoReplyEnabled $true
    Enable automatic forwards
    Set-RemoteDomain –AutoForwardEnabled $true
    Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
    Set-RemoteDomain –AllowedOOFType $ExternalLegacy
    To change all these properties at once, you can use:
    Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
    Note:
    Valid settings for the AllowedOOFType property are:
    External
    This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
    ExternalLegacy
    This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
    None
    This setting doesn’t allow for the use of OOF messages at all (both internal and external).
    InternalLegacy
    This setting only allows for internal OOF messages to be sent for all Outlook versions.
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • OOF not working for mailboxes homed on Exchange 2010 server during migration

    Hi There
    I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
    enable OOF via exchange powershell.
    Users homed on the exchange 2013 servers does not have any issues.
    The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
    So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
    in the meantime I'm checking if anyone else had similar issues.
    Any pointers will be welcome.

    Hi ,
    1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
    EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
    2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
    3.Then please un check the proxy settings in browsers and check the same.
    4.please use the command to check the auto discover 
    test-outlookwebservices
    Please check the below links also.
    http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
    http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
    http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
    http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

  • Speakers not working for Skype only on Windows 8.1

    My speakers or headphones are not working for Skype desktop but work fine for any music or videos or other programms. Any help to resolve it? in Tools>Options>Audio Settings> headphones does not show up. Everything was working fine but it just happend a day before., i havent installed any program that could make problem.

    This is very strange because, as you are saying this happened without any change to any software on your computer. I suggest the following:
    1. To help the team analyze the issue, provide logs as described in this link  under Skype for Windows Desktop and attach it to your post.
    2. As an interim solution you can try using a virtual audio device that will be a middle man between skype and your physical audio device.

  • Photoshop extension building not working for cs6, works for the rest

    I am building an extension for photoshop the manifest file is as below:
    <?xml version="1.0" encoding="UTF-8"?>
    <ExtensionManifest Version="4.0" ExtensionBundleId="Kit" ExtensionBundleVersion="2.0.0"
      ExtensionBundleName="Kit" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <ExtensionList>
      <Extension Id="Kit.extension1" Version="2.0.0" />
      </ExtensionList>
      <ExecutionEnvironment>
      <HostList>
      <Host Name="PHSP" Version="[13.0,15.9]" />
      <Host Name="PHXS" Version="[13.0,15.9]" />
      </HostList>
      <LocaleList>
      <Locale Code="All" />
      </LocaleList>
      <RequiredRuntimeList>
      <RequiredRuntime Name="CSXS" Version="3.0" />
      </RequiredRuntimeList>
      </ExecutionEnvironment>
      <DispatchInfoList>
      <Extension Id="Kit.extension1">
      <DispatchInfo >
      <Resources>
      <MainPath>./index.html</MainPath>
      <ScriptPath>./Kit.jsx</ScriptPath>
      </Resources>
      <Lifecycle>
      <AutoVisible>true</AutoVisible>
      </Lifecycle>
      <UI>
      <Type>Panel</Type>
      <Menu>Beauty Retouching Kit</Menu>
      <Geometry>
      <Size>
      <Height>580</Height>
      <Width>250</Width>
      </Size>
      <MaxSize>
      <Height>580</Height>
      <Width>250</Width>
      </MaxSize>
      <MinSize>
      <Height>580</Height>
      <Width>250</Width>
      </MinSize>
      </Geometry>
      <Icons>
      <Icon Type="Normal">./pictures/thumb/Icon.png</Icon>
      <Icon Type="RollOver">./pictures/thumb/Icon.png</Icon>
      <Icon Type="DarkNormal">./pictures/thumb/Icon.png</Icon>
      <Icon Type="DarkRollOver">./pictures/thumb/Icon.png</Icon>
      </Icons>
      </UI>
      </DispatchInfo>
      </Extension>
      </DispatchInfoList>
    </ExtensionManifest>
    I tried this code for photoshop CC and CC 2014, it works for both but I couldn't get it to run for cs6 it gives the below error from the extension manager:
    so isn't Version="[13.0,15.9]" correct? why would it not work for cs6? thanks in advance.

    Hi,
    CS6 doesn't support HTML Panels but Flash ones, this should be the why the Adobe Extension Manager fails.
    You might find help here (Flash): Creative Suite Extension Builder and here (HTML): Extension Builder 3
    Davide Barranca
    www.davidebarranca.com
    www.cs-extensions.com

  • Exported HTML not work in my host.

    Exported HTML not work in my host.
    The program works fine. Looks good in the browser preview and published in businesscatalyst, but when i exporting as html and upload it to my server is bad, all misplaced.

    Thanks for the reply.
    Everything is apparently copied and permissions are well.
    Watch this please.
    So it should be seen:
    http://koldo01.businesscatalyst.com/
    It is seen:
    http://www.koldofuentes.com/

  • ITunes does not work for Asia ( Hong Kong )

    I just purchased my first iPod Nano ( 2nd Generation) was was told by store staff all I have to do is register and download apple itunes software and then I could download MP3 songs from iTunes...paying for songs of course.
    I was shocked to learn that iTunes does not work for Hong Kong residents, nor does napster,yahoo music unlimited, etc.
    I am a Canadian living in Hong Kong, so can not read write or understand chinese, does anyone know of a English subscibtion mp3 download service that works for Hong Kong, and not emusic, tried that one, not for me .
    Please Help !
    BullDogHK

    Do you still have a Canadian credit card and Canadian billing address? If so, you should still be able to use the Canadian store.

Maybe you are looking for

  • Java Newbie Question - the import statement

    Hi Geeks, I have a problem for importing a java .class in my project. This latter is named "Tedetis_New". Inside it, I created a "src" folder containing all the source code of the application. I import a jar file inside the parent directory of "src"

  • Index on two columns

    Hi I have a table like create table tab1(tb1 number, tb2 varchar2(30), tb3 varchar2(30)) I have created two function indexes upper(tb2) and upper(tb3) on the table tab1 I have a select query like select tb1 from tab1 where upper(tb2) like upper('%tes

  • Someone know about Filenet ?

    I would like know more about Filenet, and know if it's is similar with Portal of Oracle.

  • Delete pages

    How do you delete pages in a new combined pdf? I use adobe createPDF cloud/online?

  • Copying Arrays

    I have the following method to copy part of one array to another: public static int[] subArray(int[] a, int left, int right){      int j=0;      int[] b=new int[100];      for(int i=left; i >= right; i++){      b[j]=a;      j++;      return b; but wh