Model not deploying anymore after switching to Flex 2.0

Hello you all,
our QAS system had been upgraded from SP12 to SP16, so I decided to test the new Flex 2.0 compiler with a model extracted from DEV system (via "Export to file" and "Import from file").
Everything went well as long as I kept the old Flex compiler, but when I switched to Flex 2.0 compiler I had an error in deployment. After activating the error log trace, I've been able to see the description:
Flex2Compiler.Compile: FlexCompilerException: Encountered invalid infoset AAA2LF: null
Does anybody of you know what this is about? Isn't compatibility with previous compiler versions assured by Flex 2.0?
Please note that I checked in my .gml file and no component called AAA2LF is present in the model.
Thanks a lot,
Andrea

Hi Govindu,
I tried even with a very simple model: a start point, a query, a table and a chart to show the results, and it still doesn't deploy.
However, in some cases (look like absolutely random to me), the Flex 2.0 does deploy the old model but with some serious errors, including:
- Visibility conditions not working
- Layers not displayed at all
- Unselectable tables displayed with first line selected
- Expression boxes with percentage displayed with a value 100 times grater (eg. 120% becomes 12000%)
Note that if I build the exact same model from the beginning, instead of importing an old one, there are no problems at all and everything seems to work fine.
I suppose that's an annoying SP16 bug, don't you think?
Thanks for your help,
Andrea

Similar Messages

EWS not deployed anymore to Lync 2013 Desktop Clients, Mobile Clients still working fine

Hello dear community,
the subject of EWS in conjunction with Lync 2013 has been discussed a lot here .
However, I could not find here any solution for my problem and I'm (almost) at my end.
Following scenario - 1 x Lync 2013 BE server, 1 x Lync 2013 Edge server, 1 x reverse proxy (IIS ARR). This Lync 2013 deployment
was installed about two months ago and integrated into existing IT landscape. Everything worked wonderfully - desktop and mobile clients were able to connect from inside and outside our organization, EMS was deployed to both desktop and mobile clients.
After that there are no any configuration changes made on Lync server, and yesterday, shortly before an important presentation
I've found, that EWS is not deployed anymore on all desktop clients. Mobile clients, however, continue to function smoothly.
I have tried the following: restart Lync and reverse proxy servers - without success, Lync Connectivity Analyzer shows all
green (internal and external), all relevant tests with Microsoft Remote Connectivity Analyzer were passed, also analysis using Wireshark brought nothing.
I must to say that a week ago I installed SP3 for Exchange 2010 - can it may be because? Also appears more
times a day the following error message in Event Viewer on the back-end server (language of operation system is German):
Protokollname: Lync Server
Quelle:        LS Storage Service
Datum:         05.12.2013 19:23:14
Ereignis-ID:   32054
Aufgabenkategorie:(4006)
Ebene:         Fehler
Schlüsselwörter:Klassisch
Benutzer:      Nicht zutreffend
Computer:      SERVER-11.Speedpoint.local
Beschreibung:
EWS-AutoErmittlungsfehler im Speicherdienst.
ExchangeAutodiscoverException: code=ErrorEwsAutodiscover, reason=GetUserSettings
failed, smtpAddress = xxx, Autodiscover Uri=https://autodiscover.xxx.de/autodiscover/autodiscover.svc, Autodiscover WebProxy=<NULL> ---> Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed.
Das Stammelement ist nicht vorhanden. ---> System.Xml.XmlException: Das Stammelement ist nicht vorhanden.
   bei System.Xml.XmlTextReaderImpl.ThrowWithoutLineInfo(String res)
   bei System.Xml.XmlTextReaderImpl.ParseDocumentContent()
   bei System.Xml.XmlCharCheckingReader.Read()
   bei Microsoft.Exchange.WebServices.Data.EwsXmlReader.Read()
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverRequest.InternalExecute()
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverRequest.InternalExecute()
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetUserSettings(List`1 smtpAddresses, List`1 settings, Nullable`1 requestedVersion, Uri& autodiscoverUrl)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetSettings[TGetSettingsResponseCollection,TSettingName](List`1 identities, List`1 settings, Nullable`1 requestedVersion, GetSettingsMethod`2 getSettingsMethod, Func`1 getDomainMethod)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(List`1 smtpAddresses, List`1 settings)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetSoapUserSettings(String smtpAddress, List`1 requestedSettings)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(String userSmtpAddress, UserSettingName[] userSettingNames)
   bei Microsoft.Rtc.Internal.Storage.Exchange.ExchangeContext.SendGetUserSettingsRequest(StoreContext ctx, String smtpAddress)
   --- End of inner exception stack trace ---
   bei Microsoft.Rtc.Internal.Storage.Exchange.ExchangeContext.SendGetUserSettingsRequest(StoreContext ctx, String smtpAddress)
   bei Microsoft.Rtc.Internal.Storage.Exchange.ExchangeContext.GetUserEwsSettings(StoreContext ctx, String smtpAddress, CacheMode cacheMode)
Ursache: Der AutoErmittlungs-URI war nicht richtig konfiguriert oder nicht erreichbar. Eventuell besteht ein Problem mit dem Proxy, oder andere Fehler liegen
vor.
Lösung:
Überprüfen Sie die Ereignisdetails. Überprüfen Sie, ob der URI des AutoErmittlungsdiensts ordnungsgemäß konfiguriert und erreichbar ist. Prüfen Sie, ob die Proxyeinstellungen ordnungsgemäß konfiguriert sind und der Proxy erreichbar ist. Prüfen Sie die Konfiguration
der AutoErmittlung zwischen Lync und Exchange Autodiscovery anhand des Handbuchs zur Problembehandlung. Wenn das Problem weiterhin besteht, wenden Sie sich mit den Ereignisdetails an das Supportteam Ihrer Organisation.
Ereignis-XML:
< Event xmlns="">
<System>
    <Provider Name="LS Storage Service" />
    <EventID Qualifiers="53158">32054</EventID>
    <Level>2</Level>
    <Task>4006</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-12-05T18:23:14.000000000Z" />
    <EventRecordID>19949</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>SERVER-11.Speedpoint.local</Computer>
    <Security />
</System>
<EventData>
    <Data>ExchangeAutodiscoverException: code=ErrorEwsAutodiscover, reason=GetUserSettings failed, smtpAddress=xxx, Autodiscover Uri=https://autodiscover.xxx.de/autodiscover/autodiscover.svc, Autodiscover WebProxy=<NULL> --->
Microsoft.Exchange.WebServices.Data.ServiceRequestException: The request failed.
Das Stammelement ist nicht vorhanden. ---> System.Xml.XmlException: Das Stammelement ist nicht vorhanden.
   bei System.Xml.XmlTextReaderImpl.ThrowWithoutLineInfo(String res)
   bei System.Xml.XmlTextReaderImpl.ParseDocumentContent()
   bei System.Xml.XmlCharCheckingReader.Read()
   bei Microsoft.Exchange.WebServices.Data.EwsXmlReader.Read()
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverRequest.InternalExecute()
   --- Ende der internen Ausnahmestapelüberwachung ---
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverRequest.InternalExecute()
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetUserSettings(List`1 smtpAddresses, List`1 settings, Nullable`1 requestedVersion, Uri& autodiscoverUrl)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetSettings[TGetSettingsResponseCollection,TSettingName](List`1 identities, List`1 settings, Nullable`1 requestedVersion, GetSettingsMethod`2 getSettingsMethod, Func`1 getDomainMethod)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(List`1 smtpAddresses, List`1 settings)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.InternalGetSoapUserSettings(String smtpAddress, List`1 requestedSettings)
   bei Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService.GetUserSettings(String userSmtpAddress, UserSettingName[] userSettingNames)
   bei Microsoft.Rtc.Internal.Storage.Exchange.ExchangeContext.SendGetUserSettingsRequest(StoreContext ctx, String smtpAddress)
   --- End of inner exception stack trace ---
   bei Microsoft.Rtc.Internal.Storage.Exchange.ExchangeContext.SendGetUserSettingsRequest(StoreContext ctx, String smtpAddress)
   bei Microsoft.Rtc.Internal.Storage.Exchange.ExchangeContext.GetUserEwsSettings(StoreContext ctx, String smtpAddress, CacheMode cacheMode)
< /Data>
</EventData>
< /Event>
However Event ID
32054
was actually
always there
– even
when everything
worked fine -
but with
some another content.
That's why I
don't know
if I
should take it seriously.
Thanks a lot in advance for your help!

Hi MiF,
The issue may cause by the Network Service account that the Lync Storage Service uses does not have access to the private key in used by the oAuth certificate. Please do with the following steps:
Open MMC and add the “Certificates” Snap-in (Local Computer)
Open Personal | Certificates and find the the Certificate being used for OAuth (use the Lync “Get-CsCertificate -Type OAuthTokenIssuer” cmdlet to find the serial number of the OAuth certificate).
Right-click | “All Tasks” | “Manage Private Keys”
Add Permissions for “Network Service” account (the defaults Full control and Read).
Please also check registry key on client computer.
If the HKCU\Software\Microsoft\ Office\15.0\Lync \[User SMTP Address]\Autodiscovery registry key does not exist on the user’s workstation, then it likely means that one of the following failures
have occurred:
Lync was unable to locate a valid DNS A record or SRV record for the Autodiscover site
Certificate assigned to Autodiscover site is not trusted by the Lync workstation
More details:
http://www.microsoft.com/en-in/download/confirmation.aspx?id=15668
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

HT5622 Why is my Apple ID or password not working anymore after I reset my password?

Why is my Apple ID or password not working anymore after I reset my password?
It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Word will not open anymore after update

Word will not open anymore after update

Hold down the Shift key when launching Word.
If that fails, try deleting this file.
~/Library/Saved Application State/com.microsoft.Word.savedState
Log out under the Apple in the Menu bar.
Log In and launch Word.
Still failing...
If Word failed to launch in Guest, then you need to re-install Office.
Microsoft Office for Mac 2011 14.4.1 Update (If you have an early installer you'll first need to update to 14.1.0)
Microsoft Office for Mac 2011 14.4.2 Update (requires 14.1.0 to be installed)
Important to restart after each updater.

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
Quit Elements.
Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
Delete the following files from the Preferences folder:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 11 Paths
Adobe Photoshop Elements 11 Settings
Delete this file from the Saved Application State folder:
com.adobe.PhotoshopElements.savedState

HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

My iphone 5 does not ring anymore after upgrading to ios 7.0.2. It did not happen right away, but maybe 2 weeks ago. I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in. I also turned my phone off and it still only vibrates when calls and messages come in.

I found another feed and said there is a silent button next to volume bar. That was the problem.

My new orkut page does not works anymore after uptading firefox from Firefox v9.0.1 to 10

My new orkut page does not works anymore after I uptaded this morning my browser firefox from Firefox v9.0.1 to 10 . How can I find that version mozilla Firefox v9.0.1???

Hello, friend. Thank you so much. I've already solved the problem once you sent me that link.
Cheers!

Why is Adobe SendNow not working anymore (after using Adobe Send)?

Why is Adobe SendNow not working anymore (after using Adobe Send)?
Can this be fixed?

We are concerned that you did not have a positive experience with Adobe Send. Can you share more information about your workflow so we can try to diagnose the problem?
If you can provide some context on whether you were using the Adobe Send website or the integration with Adobe Reader? Can you share some details on the types of files and approximate sizes you were trying to send to your clients?

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

settings - general - reset - reset network settings.

Rpt-files do not function anymore after deploying to a different database

first: I use CR. 10.2.3600.0 and Asp.NET with Visual Studio 2005
I developed my reports against a Develepment-Database and everything worked fine.
Then, I published my Website with the reports.
Also I made a backup of my Develepment-Database to become the Productive-Database.
All pages of my website function well (database-queries etc.), but when I try to call one of my reports a queerish error message occurs:
"This field name is not known. Error in File C:\WINDOWS\TEMP\...\{...}.rpt: Error in formula. '{xyz.ds_id} = {?@ds_id} and '."
I mean, the database is the "same" as before?!?
(BTW: the logon to the database is set at runtime and is ok.)
Why do the reports not function anymore?
The only workaround I found is to open the report in Visual Studio 2005 again and select "Crystal Reports/Databases/Check Database" against the Productive-Database.
After that the report works! BUT THIS COULD NOT BE THE SOLUTION, this means that I cannot publish my website to a different database on a customers network!!!

I tried this:
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        ' Get Location of Database from web.config
        Dim Location As String = String.Empty
        Try
            For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
                Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
                myTableLogonInfo.ConnectionInfo = myConnectionInfo
                myTable.Location = myConnectionInfo.DatabaseName & ".dbo." & myTable.Location.Substring(myTable.Location.LastIndexOf(".") + 1)
                myTable.ApplyLogOnInfo(myTableLogonInfo)
            Next
        Catch ex As Exception
            Me.LabelError.Text = "(SetDBLogonForReport) " + ex.Message
        End Try
    End Sub
and get the error:
ex.Message     "Fehler beim Laden der Datenbankinformationen.
Details: Die Datenbank-DLL 'crdb_query.dll' konnte nicht geladen werden.
Fehler in der Datei C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Fehler beim Laden der Datenbankinformationen"
which means in english:
ex.Message     "Error while loading database information.
Details: the databse-dll 'crdb_query.dll' could not be loaded.
Error in file C:\DOKUME~1\MSCHAE~1\LOKALE~1\Temp\RzpReport {748C95B6-70EC-45B9-953D-64DA215BD9DC}.rpt:
Error while loading database information"
I debugged the code and recognized that the error appears while setting the .Location property...?!?
My DatabaseName is "Rezepturverwaltung".
Example 1 with a command:
Befor setting the Location of mytable the value of the prpperty is e.g. "command".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.command"
Example 2 with a stored procedure:
Befor setting the Location of mytable the value of the prpperty is e.g. "sp_GetData".
After setting the value like in code above the value changes to "Rezepturverwaltung.dbo.sp_GetData"
What`s going wrong furthermore???
Edited by: Markus Schfer on Aug 31, 2009 9:56 AM

ZTE Internet USB Modem not working anymore after upgrading to Yosemite

Hello!
Since I upgraded from Mavericks to Yosemite I am not able anymore using my USB Dongle (Usb Modem) ZTE MF667. During the upgrade Yosemite did not show any warning about its incompatibility. Is there a way to make this USB modem work as it did on Mavericks? ZTE and my Mobile operator wont help!
Thanks!!

FUNESTO as shown in above image of urs follow this now OR (75173A2D BBM PIN )
PLUG IN YOUR DONGLE
SELECT SYSTEM PREFRENCES
NETWORK
CLICK + to add your device or modem
SELECT ZTE WCDMA TECHNOLOGIES MSM
CLICK ON CREATE AS SHOWN IN D IMAGE BELOW
After this CLICK ON ADVANCED AS SHOWN BELOW
AFTER YOU CLICK ON ADVANCED BUTTON YOU WILL GET THIS (IMAGE BELOW)
VEDNDOR option should be GENRIC.. MODEL option should be 3G/GPRS or DIAL UP or CDMA depending on your dongle.. AS SHOWN IN D IMAGE BELOW
3G/GPRS worked for me
HIT OKAY and the APPLY
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
PRESS CONNECT ENJOY..
SEE I GOT IT CONNECTED..

DVI port not working anymore after latest BIOS update on T410s

Hi all,
after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
Thanks and cheers!

Do you mean the DVI port on the docking station?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Itunes does not start anymore after upgrade to 6.05.20

I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
Any other idea?
Thanks
Christoph

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

Pages does not open anymore after the latest update

I did all suggested problem solving steps, but after the last update Pages does not open anymore.
It opens a window and immediately crashes again.
I paid for it, and I used it for my business - and I'm so angry, that there is no support for apps in fact...

Welcome to the Apple Community.
Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

Model not deploying anymore after switching to Flex 2.0

Similar Messages

Maybe you are looking for