Modelling error in Multisim's Tektronix TDS2024 FFT option

The user's manual for Tektronix TDS2024 mentions that a 1 Vrms signal will be displayed as 0 dB peak in the FFT view. However, when I connect a 1 Vrms source to Tektronix TDS2024 scope in Multisim, I get a peak at 3 dB. This is only possible if National Instruments is using peak value in 20 log(V1/Vref) forumla instead of the RMS value which an actual (i.e., physical) TDS2024 oscilloscope uses.
Could someone confirm if its really a mistake or is it supposed to be like that?
Thanks in advance.
(P.S. Attached is the Multisim file)
Attachments:
FFT modelling error in Multisim.ms13 ‏75 KB

You nailed it! In the (old SPICE) analyses everything is peak amplitude (as it is in MULTISIM's "signal" sources). NI's additon of RMS options to "power" sources and not changing the corresponding "AC Analysis" from peak to RMS kinda added to the confusion! It seems to me that MULTISIM should stick to one or the other for consistency and make it clear what it is! Most EEs likely think that RMS is the "default" whereas most CSs (like the origimal Berkeley SPICE developers) likely thought peak was (as in Asin(omega)).

Similar Messages

Modeler error when compiling web service

I'm using wscompile to build a JAR file in order to connect to a web service.
I keep getting the following error:
error: modeler error: model error: invalid entity name: "schema" (in namespace: "http://www.w3.org/2001/XMLSchema")Here's my XML for the compilation (I replaced parts with 'Blah'):
<?xml version="1.0" encoding="UTF-8" ?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
     <wsdl location="http://Blah/WebService/Traffic.asmx?WSDL" packageName="blah.blah"
          targetNamespace="http://Blah/WebService/" />
</configuration>Here's the WSDL (I replaced parts with 'Blah'):
     <?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
     xmlns:tns="http://Blah/WebService/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
     targetNamespace="http://Blah/WebService/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
     <wsdl:types>
          <s:schema elementFormDefault="qualified" targetNamespace="http://Blah/WebService/">
               <s:import namespace="http://www.w3.org/2001/XMLSchema" />
               <s:element name="getCORNorth">
                    <s:complexType />
               </s:element>
               <s:element name="getCORNorthResponse">
                    <s:complexType>
                         <s:sequence>
                              <s:element minOccurs="0" maxOccurs="1" name="getCORNorthResult">
                                   <s:complexType>
                                        <s:sequence>
                                             <s:element ref="s:schema" />
                                             <s:any />
                                        </s:sequence>
                                   </s:complexType>
                              </s:element>
                         </s:sequence>
                    </s:complexType>
               </s:element>
               <s:element name="getCORSouth">
                    <s:complexType />
               </s:element>
               <s:element name="getCORSouthResponse">
                    <s:complexType>
                         <s:sequence>
                              <s:element minOccurs="0" maxOccurs="1" name="getCORSouthResult">
                                   <s:complexType>
                                        <s:sequence>
                                             <s:element ref="s:schema" />
                                             <s:any />
                                        </s:sequence>
                                   </s:complexType>
                              </s:element>
                         </s:sequence>
                    </s:complexType>
               </s:element>
               <s:element name="getCORAll">
                    <s:complexType />
               </s:element>
               <s:element name="getCORAllResponse">
                    <s:complexType>
                         <s:sequence>
                              <s:element minOccurs="0" maxOccurs="1" name="getCORAllResult">
                                   <s:complexType>
                                        <s:sequence>
                                             <s:element ref="s:schema" />
                                             <s:any />
                                        </s:sequence>
                                   </s:complexType>
                              </s:element>
                         </s:sequence>
                    </s:complexType>
               </s:element>
          </s:schema>
     </wsdl:types>
     <wsdl:message name="getCORNorthSoapIn">
          <wsdl:part name="parameters" element="tns:getCORNorth" />
     </wsdl:message>
     <wsdl:message name="getCORNorthSoapOut">
          <wsdl:part name="parameters" element="tns:getCORNorthResponse" />
     </wsdl:message>
     <wsdl:message name="getCORSouthSoapIn">
          <wsdl:part name="parameters" element="tns:getCORSouth" />
     </wsdl:message>
     <wsdl:message name="getCORSouthSoapOut">
          <wsdl:part name="parameters" element="tns:getCORSouthResponse" />
     </wsdl:message>
     <wsdl:message name="getCORAllSoapIn">
          <wsdl:part name="parameters" element="tns:getCORAll" />
     </wsdl:message>
     <wsdl:message name="getCORAllSoapOut">
          <wsdl:part name="parameters" element="tns:getCORAllResponse" />
     </wsdl:message>
     <wsdl:portType name="TrafficSoap">
          <wsdl:operation name="getCORNorth">
               <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">
                    Blah Blah
               </documentation>
               <wsdl:input message="tns:getCORNorthSoapIn" />
               <wsdl:output message="tns:getCORNorthSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="getCORSouth">
               <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">
                    Blah Blah
               </documentation>
               <wsdl:input message="tns:getCORSouthSoapIn" />
               <wsdl:output message="tns:getCORSouthSoapOut" />
          </wsdl:operation>
          <wsdl:operation name="getCORAll">
               <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">
                    Blah Blah
               </documentation>
               <wsdl:input message="tns:getCORAllSoapIn" />
               <wsdl:output message="tns:getCORAllSoapOut" />
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TrafficSoap" type="tns:TrafficSoap">
          <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
          <wsdl:operation name="getCORNorth">
               <soap:operation soapAction="http://Blah/WebService/getCORNorth" style="document" />
               <wsdl:input>
                    <soap:body use="literal" />
               </wsdl:input>
               <wsdl:output>
                    <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="getCORSouth">
               <soap:operation soapAction="http://Blah/WebService/getCORSouth" style="document" />
               <wsdl:input>
                    <soap:body use="literal" />
               </wsdl:input>
               <wsdl:output>
                    <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="getCORAll">
               <soap:operation soapAction="http://Blah/WebService/getCORAll" style="document" />
               <wsdl:input>
                    <soap:body use="literal" />
               </wsdl:input>
               <wsdl:output>
                    <soap:body use="literal" />
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="Traffic">
          <documentation xmlns="http://schemas.xmlsoap.org/wsdl/">
               Blah Blah
          </documentation>
          <wsdl:port name="TrafficSoap" binding="tns:TrafficSoap">
               <soap:address location="http://Blah/WebService/Traffic.asmx" />
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>

Hi ethan,
I guess problem with SLD/SR. Did you complete SLD & SR configuration steps?
Please see it: http://<host>:<port>/nwa -> Configuration Management -> Scenarios -> Configuration Wizard.
See if
1) Registering Services Registry instance in SLD
2) Services Registry Destinations Creation
are not initial .
Nikhil

Xrpcc modeler error when trying to generate stub classes from a WSDL

I'm trying to generate JAX-RPC stub classes (both client and server side) from a WSDL in which one of the message parts references a complexType element defined in the <types> section of the WSDL. Here is my little WSDL document:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="Book_Def"
targetNamespace="myTypes"
xmlns:tns="myTypes"
xmlns:xsd1="myTypes"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNameSpace="myTypes"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:element name="Book" type="xsd1:BookType"/>
<xsd:complexType name="BookType">
<xsd:all>
<xsd:element name="authors" type="xsd:string" maxOccurs="10"/>
<xsd:element name="preface" type="xsd:string"/>
<xsd:element name="price" type="xsd:float"/>
</xsd:all>
</xsd:complexType>
</xsd:schema>
</types>
<message name="runMyPgm">
<part name="book" type="xsd1:Book"/>
</message>
<message name="getPgmResponse">
<part name="result" type="xsd:string"/>
</message>
<portType name="MyPgmIFPortType">
<operation name="runMyPgm">
<input message="tns:runMyPgm"/>
<output message="tns:getPgmResponse"/>
</operation>
</portType>
... Binding stuff
</port>
</service>
</definitions>
I've tried many combinations of defining my complex type and input message and whenever I run xrpcc using this WSDL as input, I get a Error: Modeler error: invalid entity name: Book (in namespace "myTypes"). Sorry if this is a dumb question, but what am I doing wrong in my <types> or <message> definitions to cause this error? I've had some luck generating stubs when the part types are all simple types, but I've not had any luck with getting a <complexType> definition accepted by xrpcc. Thanks in advance for any help you can offer.

Yes you can specify type mapping in configuration file and probably this will solve the problem, but I've never tested this approach. Perhaps I'm not advanced user. Actually the serializerFactory and deserializerFactory are a little vague for me:(

Problem on "error: modeler error: model error" by using wscompile

When I use wscompile to generate the client stub, I get the follwoing error:
error: modeler error: model error: invalid entity name: "BaseFaultType" (in name space: "http://docs.oasis-open.org/wsrf/2004/06/wsrf-WS-BaseFaults-1.2-draft-01.xsd")
What is the problem mean? And What I should do with it?
Thanks a lot.

Ershad Ahmed wrote:
Hi Swathi,
>
> Before performing the restore i would always restore control file from the backup to make sure that restore is working
Hi,
he already restored 30%, so I think we can safely assume at least some stuff did work.
Allthough I agree that since the controlfile is saved last, this is a good test.
Seems to be either a dirty tape (clean drive, repeat) or a faulty backup ( ugh ).
When you retry after cleaning, you can use -f (fillup) to save the restore from retrieving the files it allready got.
Check the initSID.sap for the backup & restore commands and esp. the bs= / ibs= / obs= options.
Volker

Error RuntimeModelerException: runtime modeler error: Wrappe

Hi!
I've develop a Web Service and its client. I run the WebService and when I run the client appears the next error:
com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: Wrapper class webservice.jaxws.DarCuenta is not found. Have you run APT to generate them?
It's necessary to run APT? When I have to run it? There isn't any way of implements and run the WebService and the client without use the APT?
The code of my WebService:
{color:#0000ff}
package service;
import java.rmi.Remote;
import java.rmi.RemoteException;
import javax.jws.WebMethod;
import javax.jws.WebResult;
import javax.jws.WebService;
import javax.jws.WebParam;
import util.DatePalabra;
@WebService(
name="IContar", // wsdl:portType
targetNamespace="urn:service" //wsdl:targetNamespace
public interface IContar extends Remote {
@WebMethod
@WebResult(name="IContar_darCuentaResponse")
public DatePalabra darCuenta(@WebParam(name = "name") String name) throws RemoteException;
{color}
{color:#0000ff}package service;
import java.rmi.RemoteException;
import javax.jws.WebMethod;
import javax.jws.WebResult;
import javax.jws.WebService;
import javax.jws.soap.SOAPBinding;
import util.DatePalabra;
@WebService(
serviceName="Contar", // wsdl:service
portName= "IContarPort", //wsdl:port name=... binding=...
endpointInterface = "service.IContar", //nombre de la interficie del WebService
targetNamespace="urn:service", //wsdl:targetNamespace
wsdlLocation = "WEB-INF/wsdl/Contar.wsdl" //nombre y ubicación en el proyecto del fichero .wsdl
@SOAPBinding(
style=SOAPBinding.Style.RPC,
use=SOAPBinding.Use.LITERAL
public class Contar implements IContar{
public DatePalabra darCuenta(String name) throws RemoteException {
DatePalabra dp = new DatePalabra();
dp.setLongitud(Integer.toString(name.length()));
dp.setPalabra(name);
return dp;
{color}
Thanks for all.

i have the same problem.
Caused by: com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: Wrapper class org.bogdanmata.test.webservices.impl.jaxws.SayHello is not found. Have you run APT to generate them?
     at com.sun.xml.ws.model.RuntimeModeler.getClass(RuntimeModeler.java:287)
     at com.sun.xml.ws.model.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:596)
     at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:543)
     at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:371)
     at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:258)
     at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:322)
     at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:188)
     at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:467)
     at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:333)
     at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:45)
     at org.springframework.beans.factory.support.FactoryBeanRegistrySupport$1.run(FactoryBeanRegistrySupport.java:121)
I've publish the sources on this svn:
http://virtualshop.googlecode.com/svn/trunk/virtualshop-read-only
The project name is Test
The IDE is Eclipse

Runtime modeler error

I am using a webservice and the functioans that it provides.
However while executing a particular service i get the following exception
The exceptioncom.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: Wrapper class org.cuashi.wof.ws.field.jaxws.GetValues is not found. Have you run APT to generate them?
com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: Wrapper class org.cuashi.wof.ws.field.jaxws.GetValues is not found. Have you run APT to generate them?
at com.sun.xml.ws.model.RuntimeModeler.getClass(RuntimeModeler.java:249)
at com.sun.xml.ws.model.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:545)
at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:492)
at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:334)
at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:220)
at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:588)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:291)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:274)
at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:267)
at javax.xml.ws.Service.getPort(Service.java:92)
at org.cuashi.wof.ws.field.NWISGroundWater.getWaterOneFlow(NWISGroundWater.java:53)
at FieldWater.main(FieldWater.java:27)
I have used the same getValues for a difference service and it worked fine.Please let me know what i need to do

i have the same problem.
Caused by: com.sun.xml.ws.model.RuntimeModelerException: runtime modeler error: Wrapper class org.bogdanmata.test.webservices.impl.jaxws.SayHello is not found. Have you run APT to generate them?
     at com.sun.xml.ws.model.RuntimeModeler.getClass(RuntimeModeler.java:287)
     at com.sun.xml.ws.model.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:596)
     at com.sun.xml.ws.model.RuntimeModeler.processMethod(RuntimeModeler.java:543)
     at com.sun.xml.ws.model.RuntimeModeler.processClass(RuntimeModeler.java:371)
     at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:258)
     at com.sun.xml.ws.server.EndpointFactory.createSEIModel(EndpointFactory.java:322)
     at com.sun.xml.ws.server.EndpointFactory.createEndpoint(EndpointFactory.java:188)
     at com.sun.xml.ws.api.server.WSEndpoint.create(WSEndpoint.java:467)
     at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:333)
     at org.jvnet.jax_ws_commons.spring.SpringService.getObject(SpringService.java:45)
     at org.springframework.beans.factory.support.FactoryBeanRegistrySupport$1.run(FactoryBeanRegistrySupport.java:121)
I've publish the sources on this svn:
http://virtualshop.googlecode.com/svn/trunk/virtualshop-read-only
The project name is Test
The IDE is Eclipse

Modeler error while starting with WSDL Doc

Hello,
I'm trying to generate the client side files from a WSDL document and am recieving the following error:
Error: Modeler error: invalid entity name: "ARRAY" (in namespace: "SOAP-ENC")
I'm executing "xrpcc -client -keep config.xml" and my config.xml file looks like:
<?xml version="1.0" encoding="UTF-8"?>
<configuration
xmlns="http://java.sun.com/jax-rpc-ri/xrpcc-config">
<wsdl name="StockQuotePlus"
location="http://soaptest.activestate.com:8080/StockQuotePlus.wsdl"
packageName="stockplus">
</wsdl>
</configuration>
Do I need to provide a typeMappingRegistry in the config.xml file? Thanks in advance for your help.
Jacob

I am not shure. In fact it is not the only problem in this WSDL :(
The XML Schema namespace is obsolete too and should be replaced with a new one from 2001. Also JAX-RPC 1.0 EA 1 does not supports polymorphic arrays, and you have to make your own complex type like this:
<types>
     <xs:schema targetNamespace="myTypes" xmlns:soap-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
               <xs:complexType name="ArrayOfstring"><xs:complexContent>
                    <xs:restriction base="soap-enc:Array">
                         <xs:attribute ref="soap-enc:arrayType" arrayType="xs:string[]"/>
                    </xs:restriction>
               </xs:complexContent></xs:complexType>
     </xs:schema>
</types>
and afterword to use this type:
<message name="MultipleStockQuote">
     <part name="SymbolArray" type="tns:ArrayOfstring"/>
</message>
At least this WSDL is not correct from specification point of view:
http://www.w3.org/TR/wsdl#_types

Modeler error: invalid entity name

Hello,
Newbie question: what does the "modeler error: invalid entity name" error message mean when using the wscompile tool of the wsdp? The full error is
error: modeler error: invalid entity name: "foo" (in namespace: "http://xml.foo")
Does it point to a problem with the namespace, part of the entity or something else?
Thanks in advance,

I believe it means the identifier called out doesn't belong in the namespace that the compiler thinks it is using.
I've had this problem, and it was when the XML Schema definition had complex types that did not contain the namespace prefix (e.g. using "MyType" instead of "myxsd:MyType" in the schema definition).

Wscompile modeler error

I'm trying to use wscompile with a WSDL file and XSDs and it keeps failing with the following error. The error is "[exec] error: modeler error: model error: invalid entity name: "EntityIdType" (in namespace: "http://ns.hr-xml.org/2004-08-02")" The type EntityIdType is defined in one of the included XSDs. The XSDs that I'm trying to use is for the HR-XML spec, so I don't really have any control over the XSDs themselves, but I tend to assume that the XSDs should be valid. I've got the WSDL file and XSDs available at http://quasistatic.com/webservices if anyone would be able to check them out for me. As a side note, I am able to use WSDL2Java from Axis on these files and it works fine. The command that I'm executing is "wscompile.bat -gen:server -f:documentliteral -mapping ${basedir}/generated/jaxrpc-mapping.xml -d ${basedir}/generated -s ${basedir}/generated/src -verbose -keep ${basedir}/wscompile-config.xml" and the wscompile-config.xml file contains:
<?xml version="1.0" encoding="UTF-8"?>
<configuration
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl location="etc/AssessmentResult.wsdl" packageName="com.lominger.survey.assessment"/>
</configuration>
Thanks for any help you can provide!

Vivek,
Thanks for responding to my post. I am using wscompile version:
C:\jwsdp-1.5\jaxrpc\bin>wscompile.bat -version
JAX-RPC Standard Implementation (1.1.2_01, build R40)
My WSDL and other files are up at http://quasistatic.com/webservices as well, but here's just the WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://assessment.survey.lominger.com/"
xmlns:apachesoap="http://xml.apache.org/xml-soap"
xmlns:impl="http://assessment.survey.lominger.com/"
xmlns:intf="http://assessment.survey.lominger.com/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:hrxml="http://ns.hr-xml.org/2004-08-02"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified"
targetNamespace="http://assessment.survey.lominger.com/"
xmlns="http://www.w3.org/2001/XMLSchema">
<xsd:import namespace="http://ns.hr-xml.org/2004-08-02"
schemaLocation="hrxml/Assessment/AssessmentResult.xsd" />
<xsd:element name="AssessmentResultResponse" type="xsd:string">
<xsd:annotation>
<xsd:documentation>Root element for AssessmentResultResponse, which is designed to hold data necessary to convey information on the results of the assessment addition</xsd:documentation>
</xsd:annotation>
</xsd:element>
</schema>
</wsdl:types>
<wsdl:message name="AddAssessmentResultRequest">
<wsdl:part element="hrxml:AssessmentResult" name="parameters" />
</wsdl:message>
<wsdl:message name="AddAssessmentResultResponse">
<wsdl:part element="impl:AssessmentResultResponse" name="response" />
</wsdl:message>
<wsdl:portType name="Assessment">
<wsdl:operation name="addAssessmentResult">
<wsdl:input message="impl:AddAssessmentResultRequest" name="AddAssessmentResultRequest" />
<wsdl:output message="impl:AddAssessmentResultResponse" name="AddAssessmentResultResponse" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="AssessmentSoapBinding" type="impl:Assessment">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="addAssessmentResult">
<wsdlsoap:operation soapAction="" />
<wsdl:input name="AddAssessmentResultRequest">
<wsdlsoap:body use="literal" />
</wsdl:input>
<wsdl:output name="AddAssessmentResultResponse">
<wsdlsoap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="AssessmentService">
<wsdl:port binding="impl:AssessmentSoapBinding" name="AssessmentPort">
<wsdlsoap:address location="http://localhost:8180/axis/services/AssessmentResult" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Any help you can provide me is MUCH appreciated.
-Jesse

JAX-RPC wscompile modeler error

I run wscompile with the following arguments:
-verbose -keep -features:documentliteral -gen:both -d generated -nd other -s source -model model.txt config.xmlI am getting an error message running JAX-RPCs wscompile tool against my WSDL. The error message is:
error: modeler error: model error: undeclared namespace prefix: ""
Unfortunately, this message doesn't give me enough information to begin locating the problem.
Has anyone else run into this problem?
I am running JWSSDK 1.2 on Windows XP w/JDK 1.4.1.
Thanks,
Chris

i think you should use the encoding and the use
specified bythe wsdl and try to override it. Also
i would encourage you to do this in 2 steps.
As you are starting from a wsdl :
wscompile -import -verbose -keep -d generated -nd other -s source -model model.gz config.xml
then have a config.xml for the client which would
allow you to do
wscompile -gen:client -verbose -keep -d generated -nd other -s source config-client.xml
Also please check the validity of the wsdl or post it back on.

Wsdeploy modeler error: FileNotFoundException

I'm using JWSDP 1.4 with Tomcat 5.0 on Windows 2000.
Tomcat is installed in this dir:
C:/Java/tomcat-jwsdp-1.4
I can run wscompile fine. But when I try wsdeploy, I get the following error:
C:\Titan\acronyms>wsdeploy -o C:/Java/tomcat-jwsdp-1.4/webapps/acronyms/acronyms.war war/acronyms.war -verbose
info: created temporary directory: C:\DOCUME~1\MARK~1.SMI\LOCALS~1\Temp\jaxrpc-deploy-fa766d
error: modeler error: java.io.FileNotFoundException: C:\DOCUME~1\MARK~1.SMI\LOCALS~1\Temp\jaxrpc-deploy-fa766d\WEB-INF\model (The system cannot find the file specified)
info: created output war file: C:\Java\tomcat-jwsdp-1.4\webapps\acronyms\acronyms.war
info: removed temporary directory: C:\DOCUME~1\MARK~1.SMI\LOCALS~1\Temp\jaxrpc-deploy-fa766d
Isn't the model supposed to be created by wsdeploy?
Here is my jaxrpc-ri.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<webServices
xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/dd"
version="1.0"
targetNamespaceBase="urn:com.titan.acronyms/wsdl/"
typeNamespaceBase="urn:com.titan.acronyms/types/">
<endpoint
name="AcronymWS"
displayName="AcronymWS Port"
description="Acronym Web Service Port"
model="/WEB-INF/model"
interface="com.titan.com.AcronymWS"
implementation="com.titan.com.AcronymWS_Impl"/>
<endpointMapping
endpointName="AcronymWS"
urlPattern="/AcronymWS"/>
</webServices>
Here is a listing of my input war file:
C:\Titan\acronyms\war>jar -tvf acronyms.war
0 Thu Jul 15 16:20:58 EDT 2004 META-INF/
106 Thu Jul 15 16:20:56 EDT 2004 META-INF/MANIFEST.MF
0 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/
0 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/
0 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/
0 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/
0 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/
49912 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/Acronyms.txt
2098 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/AcronymBean.class
1391 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/AcronymServlet.class
221 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/AcronymWS.class
475 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/AcronymWS_Impl.class
2931 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/Acronyms.class
1458 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/classes/com/titan/acronyms/DelimitedReader.class
613 Thu Jul 15 16:20:58 EDT 2004 WEB-INF/jaxrpc-ri.xml
340 Wed Jul 14 18:04:22 EDT 2004 WEB-INF/web.xml
Thanks.

You can also refer to https://jax-rpc.dev.java.net/whitepaper/1.1/index-part2.html for a detailed description of the various scenarios on developing, deploying and invoking a web service using wscompile and wsdeploy.
Post your JAX-RPC related questions to [email protected] for a quicker resolution.
Send an email to [email protected] to subscribe to the alias.
Send an mail to [email protected] for a complete list of help commands.
Thanks,
-Arun

I am getting following error! XML Parsing Error: undefined entity Location: chrome://weave/content/options.xul Line Number 6, Column 3: setting id="weave-account" type="string" title="&account.label;" / --^

I am getting followong error
XML Parsing Error: undefined entity
Location: chrome://weave/content/options.xul
Line Number 6, Column 3: <setting id="weave-account" type="string" title="&account.label;" />
--^

I had this problem - it appeared to be due to having Firefox 4 with the Firefox Sync installed as an add-on. Firefox 4 has sync included so there is no need to have it as an add-on. I went to the add-on manager and removed Firefox Sync and now appears to be working correctly.

I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

I cant re-store my iPhone through the iTunes. Message which comes up says' the iPhonw could not be restored. An unknown error occurred (21). i tried all the options and nothing seems working. please help

Hi chiekoo,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error21
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best of luck,
Mario

I use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, a

i use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, and then manually have to scale down a percentage.

Copy cat.

Error message in customizing Distiller's job options settings

I'm trying to customize job options settings in Distiller 8.1.0. I'm on Mac OS 10.4.9, and taking postscript files created in Quark 6.0 to Distiller to create PDFs. I have vendors who have provided settings and I want to transfer those specific customized settings from Distiller 6.0 standard to Distiller 8.1.0 professional.
If I try to customized 8.1's presets, I get the message "An error occurred trying to save the job options." Has anyone run into this error or this situation?

I ran into the same problem. If I try and save the settings file to a different location than the Settings folder (which is located under User_Home\Library\Application Support\Adobe\Adobe PDF\Settings\)
then it actually works. But if you try and save to the Settings folder it will not save and gives you the error. This only happens with non-administrator users. If you try with an administrator account it saves fine. I checked the folder settings for permissions and changed it to read and write for all groups and it still gives the same error (the default setting is read and write for the user). I also tried updating to 8.1.1 but it does not touch Distiller with that update. I have tried deleting the Settings folder and recreating it this does not work. What did work was a mistake on my part but it worked. I deleted the Settings folder before closing Distiller and tried saving. It saved the settings file in the original Settings folder which was in the trash! I pulled the folder out and the setting file was in it. This means there is some kind of permissions issue with Distiller and not just the OS I think. Just so you know I did do a permissions repair before I tried all of this.
The only solution right now for people who can't save to that folder is to save it to a different location and then adding the settings file to your settings folder User_Home\Library\Application Support\Adobe\Adobe PDF\Settings\
One other thing to note. Version 8.0.0 does not do this. It only happens after updating to 8.1.0
I did this in 10.4.9 and also 10.5.1

Modelling error in Multisim's Tektronix TDS2024 FFT option

Similar Messages

Maybe you are looking for