Moderation Mail Not Work in Exchange 2013
Hello All,
I facing difficulties regarding Moderation Mail. The Moderation mail not send to moderator. also i found that the arbitration mailbox also corrupted.
Error:
WARNING: The object abc.com/Users/Migration.8f3e7716-2011-43e4-96b1-aba62d229136 has been corrupted, and
it's in an inconsistent state. The following validation errors happened:
WARNING: Database is mandatory on UserMailbox.
WARNING: Database is mandatory on UserMailbox.
Please suggest
Hi,
To recreate this arbitration mailbox, you can follow the steps below.
Start the Active Directory Users and Computers snap-in.
Click Users, and then find the following account:
Migration.8f3e7716-2011-43e4-96b1-aba62d229136
Remove this account.
Run the following cmdlet:
setup /preparead/IAcceptExchangeServerLicenseTerms
Run the following cmdlets:
Enable-Mailbox -Arbitration -Identity "Migration.8f3e7716-2011-43e4-96b1-aba62d229136"
Set-Mailbox "Migration.8f3e7716-2011-43e4-96b1-aba62d229136" -Arbitration –Management:$true
Here is an article about re-creating the Discovery system mailbox, it is the same process to recreate the arbitration mailbox mentioned in the error message above.
http://technet.microsoft.com/en-gb/library/gg588318(v=exchg.150).aspx
Best regards,
Belinda Ma
TechNet Community Support
Similar Messages
-
POP3 is not working in Exchange 2013
Hi,
Facing Wiered issue in Exchange 2013, POP3 is not working ... When configuring POP3 in outlook it failed to authenticate.
unknown user name or bad password. [Error=ProxyNotAuthenticated Proxy=ZAJNBEXC03.cws.sasol.com:1995:SSL]"
AmitCredentials are correct
Here is the output ..... pls. let me know if this is correct
[PS] C:\Windows\system32>Get-PopSettings |fl
RunspaceId : ecc593c8-067e-4d9d-aca1-c121295b8499
Name : 1
ProtocolName : POP3
MaxCommandSize : 512
MessageRetrievalSortOrder : Ascending
UnencryptedOrTLSBindings : {[::]:110, 0.0.0.0:110}
SSLBindings : {[::]:995, 0.0.0.0:995}
InternalConnectionSettings : {ZAJNBEXC02.cws.sasol.com:995:SSL, ZAJNBEXC02.cws.sasol.com:110:TLS}
ExternalConnectionSettings : {ZAJNBEXC02.cws.sasol.com:995:SSL}
X509CertificateName : mail.sasol.com
Banner : The Microsoft Exchange POP3 service is ready on ZAJNBEXC02.
LoginType : PlainTextLogin
AuthenticatedConnectionTimeout : 00:30:00
PreAuthenticatedConnectionTimeout : 00:01:00
MaxConnections : 2147483647
MaxConnectionFromSingleIP : 2147483647
MaxConnectionsPerUser : 16
MessageRetrievalMimeFormat : BestBodyFormat
ProxyTargetPort : 1995
CalendarItemRetrievalOption : iCalendar
OwaServerUrl :
EnableExactRFC822Size : False
LiveIdBasicAuthReplacement : False
SuppressReadReceipt : False
ProtocolLogEnabled : True
EnforceCertificateErrors : False
LogFileLocation : D:\Program Files\Microsoft\Exchange Server\V15\Logging\Pop3
LogFileRollOverSettings : Daily
LogPerFileSizeQuota : 0 B (0 bytes)
ExtendedProtectionPolicy : None
EnableGSSAPIAndNTLMAuth : True
Server : ZAJNBEXC02
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=1,CN=POP3,CN=Protocols,CN=ZAJNBEXC02,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Sasol,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=cws,DC=sasol,DC=com
Identity : ZAJNBEXC02\1
Guid : 4c5d5409-1b4a-4127-a4cd-11b064156322
ObjectCategory : cws.sasol.com/Configuration/Schema/ms-Exch-Protocol-Cfg-POP-Server
ObjectClass : {top, protocolCfg, protocolCfgPOP, protocolCfgPOPServer}
WhenChanged : 2015-02-24 08:57:41 AM
WhenCreated : 2014-12-08 11:25:29 AM
WhenChangedUTC : 2015-02-24 06:57:41 AM
WhenCreatedUTC : 2014-12-08 09:25:29 AM
OrganizationId :
OriginatingServer : ZAJNBWCWSFGC001.cws.sasol.com
IsValid : True
ObjectState : Unchanged
==================================================================
In my case I have 4 DAG and each having 3 server. .. I am POP test and it is failing with below error
RunspaceId : 75d8800c-3f32-4750-8fe1-940133eaf6e8
LocalSite : AFR-BYN
SecureAccess : True
VirtualDirectoryName :
Url :
UrlType : Unknown
Port : 0
ConnectionType : Plaintext
ClientAccessServerShortName : ZAJNBEXC01
LocalSiteShortName : AFR-BYN
ClientAccessServer : ZAJNBEXC01.cws.sasol.com
Scenario : Create a MailboxSession object.
ScenarioDescription : Creating MailboxSession object to access the mailbox [[email protected]].
PerformanceCounterName :
Result : Failure
Error : Unable to create MailboxSession object to access the mailbox [[email protected]].
Detailed error information:
[Microsoft.Exchange.Data.Storage.WrongServerException]: The user and the mailbox are
in different Active Directory sites. Inner error [Microsoft.Mapi.Ma
UserName : migrationtest3
StartTime : 2015-02-24 10:58:51 AM
Latency : -00:00:00.0010000
EventType : Error
LatencyInMillisecondsString :
Identity :
IsValid : True
ObjectState : New
Amit -
RBL not working on Exchange 2013 Edge Transport
Single multi-role server with a couple of mailboxes, recently added an Edge Transport server. After configuring the Edge Subscribtion I added sen.spamhaus.org as a RBL Provider:
Add-IPBlockListProvider -Name Spamhaus -LookupDomain zen.spamhaus.org
This is not working. A lot of spam is still entering Exchange and the http://www.crynwr.com/spam/ test failed.
Both servers run Exchange 2013 CU5.
Did my post help? Please use "Vote As Helpful", "Mark as answer" or "Propose as answer". Thank you!Hi,
Yes, the command is specific for provider SpamHaus.
http://tweaks.com/windows/40003/cut-down-on-spam-with-ip-block-list-providers-rbl/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Have you added the additional parameters in the command and did it work?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
SME 7.1 not working with Exchange 2013 SP1 CU6
Hello, i tried upgrading to SME 7.1 on our Exchange 2013 SP1 CU6, but when trying to configure the Exchange Server in the SME management console using the configuration wizard, it gave an error before the LUN mapping page, saying "Failed to get Exchange information for server" and "The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.". I upgraded Snapdrive to 7.1, verfied all credentials according to the manuals, re-installed and rebooted multiple times (registry and filesystem cleaned, even tried to rename the existing SnapInfo directory, ...), stopped all other services on the server but without any change... Every time when trying to run the configuration wizard, the debug log shows no errors, lists all Exchange information and ends with the following lines:[11/18 12:51:58 155] Exit CSmeCDOExm::GetExchangeStructureInternal 0x0
[11/18 12:51:58 155] Exit CNtapSnapMgr::GetExchangeStructure: 0x0
[11/18 12:51:58 233] Enter CSmeServerBase::~CSmeServerBase ...
[11/18 12:51:58 248] m_ptrSnapShot released
[11/18 12:51:58 248] m_pISnapShot4 released
[11/18 12:51:58 248] m_pISnapShot5 released
[11/18 12:51:58 248] m_pISnapShot6 released
[11/18 12:51:58 248] m_pISnapShot7 released
[11/18 12:51:58 248] m_pISnapShot8 released
[11/18 12:51:58 248] m_pISnapShot9 released I ended up uninstalling SME 7.1 and re-installed SME 7.0 which is working. Exchange Server: ESXi 5.5 VM, Windows Server 2012 R2 (with current patches), Exchange 2013 SP1 CU6 - no DAG, single server installation (in co-existence with Exchange 2010), 4 iSCSI LUNs created with Snapdrive (1x Log, 3x Store), System drive and Exchange installation drive on vmdk Disks (via ESXi -> NFS store on the same NetApp)NetApp: FAS 2240-2 with Data ONTAP 8.1.4P1 7-mode (with complete license bundle) Anyone else got this problem or even better - a solution?We could not reproduce the error with the upgrade workflow.Looking at the error and the relevant function, we could force the problem in following conditions: -SME is configured or ran at the DAG level-one of the following services is stopped or not responding on one nodes of the DAG Snapdrive Service, Snapmanager Service, Snapdrive Storage Management Service,Snapdrive Management Service. Would be good if we could get the output of following powershell cmdlet before and after the upgrade: Get-Service –ComputerName Node1, Node2, Node3 –name Snap*, SDMGMT*, SWSvc Best regards,Dan
-
Redirect emails in OWA and Outlook 2010 not working in Exchange 2013
I have an new install of Exchange 2013 with all updates.
When I setup an inbox rule to redirect messages to another contact it is not working.
When I used Outlook 2010 and ran the rule manually I received this error:
"the redirect action is not currently supported with run rules now"
It seems that I didn't setup up something correctly in Exchange 2013 or a feature is not turned on. Please assist.
In the EM console when I setup forwarding that is working. Its the inbox rule redirect not working.Hi,
From your description, I recommend you use the following cmdlet to ensure that the DeliverToMailboxAndForward parameter is set to $True.
Get-Mailbox <identity> | fl DeliverToMailboxandForward
If this parameter is false, you can use the Set-Mailbox cmdlet to set it and check the result.
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support -
Throttling policy not working on Exchange 2013 CU6
Hi,
We have a test throttling policy to restrict a mailbox to send at most 2 messages
per minute in our live Exchange 2013 CU6 enviroment. It was associated to a test mailbox. We have separated installed 2 mailboxe and 2 cas server roles in our enviroment. I have checked latest CU-s (7 & 8) but these are
not fixing any related bugs.
We tried lots of workaround (see below list) and solutions to fix this but it is still not working with outlook MAPI and OWA client.
Throttling policy not working
smtp service restart
RPC Client Acces service restart
The policy details:
Get-ThrottlingPolicy low_rate_limit |fl *limit*
MessageRateLimit : 2
RecipientRateLimit : 1000
Get-mailbox [email protected] | fl ThrottlingPolicy
ThrottlingPolicy : low_rate_limit
Do you have any idea what is the problem?
Thank you in advance.
br,
ZoltanHi Zoltan,
Base on my research, you need to configure the MessageRateLimit parameter on receive connector also.
The MessageRateLimit parameter specifies the maximum number of messages that can be sent by a single client IP address per minute. The default value for a Receive connector configured in the Transport service on a Mailbox server is
unlimited. The default value for a Receive connector configured on an Edge server is 600 messages per minute. The valid input range for this parameter is 1 to 2147483647. To remove the message rate limit on a Receive connector, enter a value of
unlimited.
https://technet.microsoft.com/en-us/library/bb125140(v=exchg.150).aspx
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
AutoReplyState is Enabled. But still OOF is not working on exchange 2013
Hi All,
We have exchange 2013 installed. How can I make our OOF (Out of Office) reply works?
Thanks in advance.
JakeHi Sneff,
Sorry, but I can't find anything on my event viewer that is "MSExchangeMailboxAssistants". Do i need to start the "Microsoft Account Sign-in Assistant" in services?
Checking oof with
https://testconnectivity.microsoft.com/. I got lots of "x". Please give some advice :
Exchange Web Services synchronization, notification, availability, and Automatic Replies.
Not all tests of Exchange Web Services tasks completed.
Additional Details
Elapsed Time: 42852 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to test Autodiscover for blank.com.ph.
Testing Autodiscover failed.
Additional Details
Elapsed Time: 42852 ms.
Test Steps
Attempting each method of contacting the Autodiscover service.
The Autodiscover service couldn't be contacted successfully by any method.
Additional Details
Elapsed Time: 42852 ms.
Test Steps
Attempting to test potential Autodiscover URL https://blank.com.ph:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Test Steps
Attempting to test potential Autodiscover URL https://autodiscover.blank.com.ph:443/Autodiscover/Autodiscover.xml
Testing of this potential Autodiscover URL failed.
Additional Details
Elapsed Time: 21299 ms.
Test Steps
Attempting to resolve the host name autodiscover.blank.com.ph in DNS.
The host name resolved successfully.
Additional Details
Testing TCP port 443 on host autodiscover.blank.com.ph to ensure it's listening and open.
The specified port is either blocked, not listening, or not producing the expected response.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl01_ctl01_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
Attempting to contact the Autodiscover service using the HTTP redirect method.
The attempt to contact Autodiscover using the HTTP Redirect method failed.
Additional Details
Test Steps
Attempting to contact the Autodiscover service using the DNS SRV redirect method.
The Microsoft Connectivity Analyzer failed to contact the Autodiscover service using the DNS SRV redirect method.
Additional Details
Test Steps
Checking if there is an autodiscover CNAME record in DNS for your domain 'blank.com.ph' for Office 365.
Failed to validate autodiscover CNAME record in DNS. If your mailbox isn't in Office 365, you can ignore this warning.
<label for="testSelectWizard_ctl12_ctl06_ctl00_ctl00_ctl04_tmmArrow">Tell
me more about this issue and how to resolve it</label>
Additional Details
There is no Autodiscover CNAME record for your domain 'blank.com.ph'.
Elapsed Time: 24 ms.
Thanks
Jake -
Lync integration not working after Exchange 2013 SP1 is installed...
Hi,
I have two Exchange 2013 servers running and everything is fine, almost.
The problem is that on the first server we had OWA with Lync integration working before installing SP1, but after the installation of SP1, it doesn't Work any more.
The second server was installed with SP1 from the start, but we can't get the Lync integration to Work on this one either..
When we log in to OWA, it just starts to sign in but then says "there was a problem signing in, if this continues please contact your helpdesk"
I have checked the Exchange server for events, and i can see the event ID 112 everytime i recycle the Application Pool, so there are some connection between Exchange and Lync..
Have any of you Guys seen or experienced any thing like this?
Thanks in advance.
Regards
KennethHi,
I recommend that you refer to the following article to troubleshoot the issue:
Troubleshooting tips for Exchange 2013 OWA IM Integration to Lync 2013
This post describes how to configure Exchange 2013 OWA to have IM integration to Lync 2013. Here I would like to give some troubleshooting tips in case you can't get the integration to work.
In addition, here is a similar thread for your reference:
Lync 2013 with Exchange 2013 SP1 OWA integration failed
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support -
Search-MailboxAuditLog is empty - Mailbox Audit Logging not working in Exchange 2013 CU6 environment
Hello,
i activated Mailbox Audit Logging for Admin, delegate and owner with all supported operations (update, delete, etc..)
like mentioned here:
http://exchangeserverpro.com/using-exchange-server-2013-mailbox-audit-logging/
But also two days later (and also one Server reboot later) search-MailboxAuditLog is still empty.
any ideas how to fix this?
Best,
martinHi S.Nithyanandham,
i looked up the mailboxfolderstatistics. There are items in the folder:
[PS] C:\Windows\system32>Get-MailboxFolderStatistics mailboxname |where{$_.Name -like "*audit*"}
RunspaceId : a95e32b8-93c3-4330-8d42-45cade9d64d4
Date : 18.09.2014 16:35:20
Name : Audits
FolderPath : /Audits
FolderId : LgAAAADmBpGVdb8iQp3F89WOcmcHAQBpQNFODkTESLeLj74B887wAAAAAAESAAAB
FolderType : Audits
ItemsInFolder : 147
DeletedItemsInFolder : 0
FolderSize : 434.2 KB (444,649 bytes)
ItemsInFolderAndSubfolders : 147
DeletedItemsInFolderAndSubfolders : 0
FolderAndSubfolderSize : 434.2 KB (444,649 bytes)
OldestItemReceivedDate :
NewestItemReceivedDate :
OldestDeletedItemReceivedDate :
NewestDeletedItemReceivedDate :
OldestItemLastModifiedDate :
NewestItemLastModifiedDate :
OldestDeletedItemLastModifiedDate :
NewestDeletedItemLastModifiedDate :
ManagedFolder :
DeletePolicy :
ArchivePolicy :
TopSubject :
TopSubjectSize : 0 B (0 bytes)
TopSubjectCount : 0
TopSubjectClass :
TopSubjectPath :
TopSubjectReceivedTime :
TopSubjectFrom :
TopClientInfoForSubject :
TopClientInfoCountForSubject : 0
SearchFolders :
Identity : mailboxname\Audits
IsValid : True
ObjectState : New
What do you think?
why cant i search and find these entries the auditlog?
best,
martin -
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
hi ALL
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
2 cas Servers
first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
please support
thanksHi,
According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
If I have misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
Please run following command to double check the database status:
Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
for further troubleshooting.
Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
Best Regards,
Allen Wang -
Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does
Hi there!
We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
We have downloaded November 2013 update for OWA.
We found out a guide for putting updates on OWA and done this steps:
* Remove-OfficeWebAppsMachine
* Installed the november update
* Restarted OWA server
* ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
https://owasrv.domain.local -CertificateName "certname" -AllowHttp -EditingEnabled
* Restart-Service WACSM
- checked in IIS in the bindings if the site useses the correct certificate
Then we went on Sharepoint 2013 and ran some commands:
* Remove-SPWOPIBinding –All:$true
* New-SPWOPIBinding -ServerName owasrv.domain.local
* Set-SPWOPIZone –zone “external-https”
Now here are the funny things:
* Excel word app on Sharepoint 2013 works
* Word APP not working (screenshot)
* Lync 2013 powerpoint still not working (screenshot)
* status of OWA is healthy
bostjancHi,
The Friendly name field must be unique within the Trusted Root Certificate Authorities store. In -CertificateName, enter the friendly name you gave your
certificate earlier.
Validate the configuration by navigating to the discovery URL of the Office Web Apps server. Like
https://xxx/hosting/discovery
Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support -
Apple Mail not working after internet outage.
10.9.5 Mail not working after internet outage. Connection doctor shows everything green. Other apps connecting to internet fine. Mailboxes show online. I can login and get mail via web iCloud.com. But Mail app will not send or receive. Tried rebooting Mac, and restarting Mail. Tried Rebuild. Second day with this problem.
Troubleshooting Apple Mail
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
Crystal report 8.5 export to csv and rtf format not working with office 2013
Hi Experts,
Crystal report version 8.5 hangs and eventually crash when i export my report to csv or rtf format on windows 7 with office 2013 installed, code is written in VB 6 although the same scenario is working with office 2010 installed.
i debugged the code and found the application hangs at function Report.Export(False).
below is the code snippet
.PDFExportAllPages = True 'ePDFExportAllPages
.PDFFirstPageNumber = ePDFFirstPageNumber
.PDFLastPageNumber = ePDFLastPageNumber
.RTFExportAllPages = True 'eRTFExportAllPages
.RTFFirstPageNumber = eRTFFirstPageNumber
.RTFLastPageNumber = eRTFLastPageNumber
.UseReportDateFormat = eUseReportDateFormat
.UseReportNumberFormat = eUseReportNumberFormat
.UseReportNumberFormat = eUseReportNumberFormat
.XMLAllowMultipleFiles = eXMLAllowMultipleFiles
.XMLFileName = eXMLFileName
Report.Export (False) ----Application hangs here and eventually crash
Looking forward for your help, as it is very urgent
Regards
MohitHi Mohit
CR 8.5, being about 15 years old, does not support Windows 7. I am surprised this works for you with MS Office 2010 and to be honest, I'd consider my self lucky there. The fact that is does not work with office 2013... well, like I said, lucky with Office 2010 and your luck ran out with Office 2013.
Your option; rewrite the app in VS 2010 / 2012 / 2013 and use the CR Assemblies for VS .NET from SAP Crystal Reports, Developer Version for Visual Studio .NET. The CR Java SDK would be another option.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Mail not working in new mini mac
i got new mini mac and mail not working. i get this message.
You have Mail version 4.2 (1078/1084). It can’t be used on Mac OS X Version 10.6.8 (Build 10K549). For more information, click the Help button.
dont know what to do
thanksShould be Mail 4.5. With Spotlight, check to see if you have more than one version of the Mail app onboard. Also, make sure that there is one at the root level of the Applications folder, and that it is namely simply Mail before applying the Combo.
Ernie -
I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?
Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.
Maybe you are looking for
-
IPod not properly ejected- now iTunes will not work - Help!
My friend had his ipod connected to my computer to charge. Conneceted through USB on a Dell/ Windows 2000 / system. He disconnected the ipod without properly ejecting it - Now, when i connect my ipod, iTunes will not recognize it- iTunes does not ope
-
Net price to different G/L Account.
23.01.2009 Hi friends, I have Sales Orders with different material groups. I need the revenues from these material groups to go into different G/L accounts when the invoice is transferred to accounting. For this in the same pricing procedure I used d
-
InDesign hasn't saved file changes
I've just spent a whole morning working on a file, and NONE of the changes that I've made to the document have been saved by InDesign. I've saved regularly as I've gone, and I've received no error messages or warnings from InDesign, yet I've reopened
-
XP SP3 install without Bootamp 2.1 update ?
Hi all, Just wondering how necessary is it to update bootcamp 2.1 before proceeding with XP SP3. I just can't get BC 2.1 installed (same issue as everyone else) and curious if anyone went SP3 without the update. Working well for you? Errors of any ki
-
I cannot open files in my downloads
cannot open files in my downloads