Modify Cube without clear data

Hi all,
By request I changed a cube i.e. add several key figures into this cube. Following this change the related update rule and DTP also changed. Now I want to transport this changed cube into Productive system but don't want to delete all data in the cube before this transport, is this possible and what are the precautions ?
Thanks in advance

Dear Leon Ouyang,
We can transport the INfo cube without data deletion into production system with out any issues.But only thing is it will take more time (time depends on the data volume i.e. if there is huse data it will take more time).
With my previous observation ,i found for 25 million records it took 1hour15 mins of time to overwrite the exesting info cube in production.
Here is the logic behind the object transport which is already exist in production:
When ever we are transporting obects from one system(dev sys) to another system (prod sys) ,at the time of transport all the data will be transferd in to buffer and revert back to original object (by system it self) after the objects got sucess fully imported.
Below are the Precaution we have to take while transporting the info cube are:
1) Make sure that is no local request created for the transport objects( in your scenario info cube,DTP,Transformation..etc).
2) Data loads should not happen while transportion.
3) Make sure that transport path from dev to prod is perfect(we can check in se09 transaction).
4) Better to Transport object in from top to bottom i.e. 1st info cube and then depending transformation,dtp's etc..
5) Monitor the transport job wile transoporting.we can find job with RDD* IN Sm37 transaction.
Hope this may give you some input for transporting objects...
Pls let me know if you require any further info..
Cheers,
Maruthi

Similar Messages

Excel - Modify rows without touching other data (have gone thru LV report generation 4 designs)

File attached....
Have gone thru FAQs and examples. (And also 4 parts of 'Creating a Report in Microsoft Excel Using the LabVIEW Report Generation Toolkit'. Unfortunately this document is not clear enough for me.)
Have task of modifying rows of the same excel sheet, number of times without touching data already present (numbers and strings)
I have an excel file. (attached)
A test will be run N number of times. (N<=17)
SubTask 1 --> Each time it runs, string data needs to be placed in 'n'th row. (...there are going to be notes in Row 18 and row 19)
SubTask 2 --> Each time it runs, a 1D array data also will be placed in the same row (but in different cells)
SubTask 3 --> The number 'n' of the row (where to place the current iteration's data) needs to be determined on fly (by looking at "n-1"st non blank row)
The same file needs to be used.
How can above be achieved ?
thnks
Sandeep
Attachments:
sample excel file.xls ‏14 KB

See if this board will help.
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=2391

How to Maintain Cube without Aggregating the incoming data

Hi All,
I have a process which loads a cube and then aggregates the incoming data. The PL/SQL procedure is as below.
CREATE OR REPLACE PROCEDURE load_actual AS
xml_clob clob;
xml_str varchar2(4000);
isAW number;
begin
DBMS_LOB.CREATETEMPORARY(xml_clob,TRUE);
dbms_lob.open(xml_clob, DBMS_LOB.LOB_READWRITE);
dbms_lob.writeappend(xml_clob, 183, ' <BuildDatabase Id="Action4" AWName="FIN_AW.FINAW" BuildType="EXECUTE" RunSolve="true" CleanMeasures="false" CleanAttrs="false" CleanDim="false" TrackStatus="true" MaxJobQueues="0">');
dbms_lob.writeappend(xml_clob, 42, ' <BuildList XMLIDref="ORG_ACTUAL.CUBE" />');
dbms_lob.writeappend(xml_clob, 18, ' </BuildDatabase>');
dbms_lob.close(xml_clob);
xml_str := sys.interactionExecute(xml_clob);
dbms_output.put_line(xml_str);
end;
As per my requirement I have to flip sign for some leaf level dimensions after the cube load and then re run the aggregate. If I go with this script I will end up aggregating my data twice.
My question is how do I modify this script so that the records are loaded in the cube but the aggregate does not run.
I tried by changing RunSolve="true" parameter as below but still it is solving the data.
dbms_lob.writeappend(xml_clob, 184, ' <BuildDatabase Id="Action4" AWName="FIN_AW.FINAW" BuildType="EXECUTE" RunSolve="false" CleanMeasures="false" CleanAttrs="false" CleanDim="false" TrackStatus="true" MaxJobQueues="0">');
My cubes are compressed, partitioned and I am using Oracle 10.2.x.
Please provide your suggestions if I missing something here ?
Thanks,
Vishal

10g Cubes have a property called 'AutoSolve'. As far as I understand, if this is set to YES, then the aggregation will happen automatically whenever you build the cube. I may be missing something, but the RunSolve property of the BuildDatabase command does not seem to be used.
In AWM the "AutoSolve" property appears to correspond to the check box
"Use Default Aggregation Plan for Aggregation"
in the "General" tab for the cube. In order to uncheck this you also need to uncheck "Use Compression" on the "Implementation Details" tab.
As an example, I created a cube named C1 with the box checked and then exported the XML.
<Cube Name="C1" LongName="AMERICAN::C1" ShortName="AMERICAN::C1" PluralName="AMERICAN::C1" Id="C1.CUBE" Schema="GLOBAL" UseGlobalIndex="false" SparseType="COMPRESSED" DefaultDataType="NUMBER" AutoSolve="YES">
I then created cube C2 with it unchecked.
<Cube Name="C2" LongName="AMERICAN::C2" ShortName="AMERICAN::C2" PluralName="AMERICAN::C2" Id="C2.CUBE" Schema="GLOBAL" UseGlobalIndex="false" SparseType="STANDARD" DefaultDataType="NUMBER" AutoSolve="NO">
The compression check is enforced by AWM. I hand modified the XML for cube C1 to switch AutoSolve to NO and used it to recreate the cube without errors (as a compressed cube). I don't know if there will be any issues downstream.

How to delete aggreagetd data in a cube without deleting the Aggregates?

Hi Experts,
How to delete aggreagetd data in a cube without deleting the Aggregates?
Regards
Alok Kashyap

Hi,
You can deactivate the aggregate. The data will be deleted but structure will remain.
If you switch off the aggregates it wont be identified by the OLAP processor. report will fetch the data directly from the cube. Switching off the aggreagte won't delete any data,but temporarly the aggregate will not be availbale as if it is not built on the info cube. No reporting is not possible on swtiched off aggregates. The definition of the aggregate is not deleted.
You can temporarily switch off an aggregate to check if you need to use it. An aggregate that is switched off is not used when a query is executed.This aggregate will be having data from the previous load's. If the aggregate is switched off means it wont be available for reporting but data can be rolled up into it.
If u deactivate the aggregates the data will be deleted from the aggregates and the aggregate structure will remain the same.
The system deletes all the data and database tables of an aggregate. The definition of the aggregate is not deleted.
Later when you need those aggregate once again you have to create it from scratch.
Hope this helps.
Thanks,
JituK

Can I use an Android phone without a data plan?

Please read all of this before responding. You will not be helping when you show a clear misunderstanding of my question.
I do not need a data plan. Everywhere I go has Wi-Fi, and I am perfectly content to not have internet connectivity in the event that I don't have Wi-Fi. What I want to know is if I can buy a phone from a store (not from Verizon or a contract renewal) and replace my current phone with it without needing a data plan. There is NO software/hardware reason why I couldn't, and the only reason I would need to is as a Verizon requirement.
As an additional question, if Verizon doesn't allow it, is there any workaround?
I want an android phone not to have ubiquitous connection to social media. I want an android phone to have platform to run software on in addition to making/receiving calls and text messages. I would not utilize a data plan and it would be a waste of money.
Additional info:
Can I use an Android phone that I buy from a retailer on my Verizon plan without adding data? There's no hardware or software reason why I need a data plan, and there IS a point to having a smart phone without a data plan: Wi-Fi. I don't need to have redundant internet access. The only reason conceivable for why I'd need a data plan is because Verizon wants more money for no additional service (I wouldn't USE connectivity provided by a data plan). I don't want to have a mobile platform for running software and a phone filling my pockets, I'd like it to be in one. All the connectivity I need is for calls and text messaging.
<< Comments edited to comply with Verizon Wireless Terms of Service >>
Specifically:
Users of the Verizon Wireless Community agree not to upload, post, or otherwise transmit any content (including but not limited to text, links, communications, software, images, sounds, data, or other information) that includes any of the following inappropriate content:
Posts that describe how to violate any Verizon Wireless or Verizon Wireless policy or term or condition are considered unacceptable will have the offensive language deleted.
Posts that discuss hacking and/or rooting a wireless device from any carrier will be removed.
Message was edited by: Verizon Moderator

I stand corrected!
Here's an article on the subject with a good discussion and a somewhat dodgy suggestion for non-Verizon service: http://news.cnet.com/8301-1035_3-57555091-94/can-you-ditch-your-smartphone-data-plan-for-wi-fi/.
Here's a discussion on a T-Mobile forum laying out the options (as of last November): http://support.t-mobile.com/message/198200. It sounds like it would meet one of the OP's desires: "Can I use an Android phone that I buy from a retailer on my Verizon plan without adding data?" Not on Verizon, but probably on T-Mobile.

How to clear data in Table Control.

hi! all
How to clear the data in table control.
i have a Table control which displays column A data from the previous screen and allows to enter column B and column C and i have a button CLEAR, when i click CLEAR button the Data displaying in table control has to be cleared. how to do it.
Regards,
Nagulan

Hi,
Loop over the internal table of table control & clear data from table control.
loop at tctab.
clear tctab.
modify tctab.
endloop.
Best regards,
Prashant

Add new key figure and characterstic into cube without touching historical

Hi ,
I have cube in prodcution which has historical data of last 4 years .
Now buisisness is asking me to add one keyfigure and and one characterstic to cube without tcouchingand next load these 3 fileds to be populated .
is it possible to this ?
Please let me know

check the blog by Nagesg Ganisetty regarding remodelling option available in 7.0.
thats a good blog and very informative.
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm

Clearing data showing the error ..

Hi experts ,
We use the clearing data , through the run package ..
But while clearing the data , its show error ..
Please find below the error
TOTAL STEPS 3
1. Export_Zero: completed in 0 sec.
2. Load Cube: Failed in 0 sec.
[Selection]
(Member Selection)
Category: BUDGET
Time: 2011.JUL
LegalEntity: MEAST
AccountB: OH1111,OH1112,OH1113,OH1121,OH1122,OH1123,OH1124,OH1125,OH1126,OH1127,OH1128,OH1129,OH1130,OH1131,OH1132,OH1201,OH1202,OH1203,OH1204,OH1205,OH1206,OH1207,OH1208,OH1209,OH1210,OH1211,OH1212,OH1301,OH1301A,OH1302,OH1303,OH1304,OH1305,OH1306,OH1307,OH1307A,OH2101,OH2102,OH2102A,OH2201,OH2202,OH2301,OH2302,OH2303,OH2304,OH3101,OH4101,OH5101,OH6101,OH7101,OH8101,OH8101A,OH8101B,OH9101,OH9102,OH9103,OH9103A,OH9104,OH9105,OH9106,OH9106A,OH9107,OH9108,OH9109,OH9110,OH9111,OH9112,OH9113,OH9114,OH9115,OH9116,OH9116A,OH9116B,OH9116C,OH9116D,OH9117,OH10101,OH10102,OH10103,OH10104,OH10105,OH10106,OH10106A,OH11101,OH11102,OH11103,OH11104,BUD100,BUD100A,BUD101,BUD101A,BUD102,BUD103,BUD107,BWCAP,BWCAP1,BCAPEX,BCAPEX1,BACQ,BWCAPLY,BWCAPLY1,TOTOH,OHDIR,BUD104,BUD105,BUD106,TAXB,AllocPer,CCRef,EmpRef,MgrNum,StfNum,PrvYrActual,ValAccount
CostCentre:
DataSrcM: INPUT
EmployeeRef: NoRef
ProductM:
RptCurrency:
[Messages]
Retrieving the COM class factory for component with CLSID {DC7FEF8A-E1A0-4ED4-96EE-3904E9574C90} failed due to the following error: 8007000e.
Please suggest the solutions
Regards
Dayalan M

Hi,
I am guessing some COM component is not properly installed. Can you login to the server system and run the diagnostic on the server manager. Check if everything is green or not.
Are you able to run other DM packages?

Can I use satnav on the C5-00 without using data +...

Can someone tell me if it's possible to use the satnav on the C5-00 without using data?
AND... how can I get mpas for Singapore and Malaysia - I want to have them loaded up in advance of going there
Thanks
Omar

Use the Nokia Map Loader on a PC to preinstall maps on the phone.
Map Loader comes with Nokia Suite:
http://europe.nokia.com/support/product-support/nokia-ovi-suite
In the settings you can turn off A-GPS and network based positioning, leaving only GPS, and also disable internet access for the Nokia Maps application. When you disable A-GPS and network based positioning, getting a location with just the GPS receiver might take a long time (and if you're in a city with lots of high buildings and little clear sky visible, it might be difficult for the phone to see the satellites).

FB01 accrual trasaction posted without reversal date & reason

Hi,
SAP Payroll accrual transactions uploaded through Ezysolutions has posted without reversal date & reason is there any way to change/add to these transactions.
Thank you,
Sekhar

Hi,
You can read the upload program to see what t.code is used. But, I believe it should interface FBS1, though it's showing FB01 in history header.
Anyways, pick up the doc # from FB03 and enter it in F.81,and run in a test mode before final reversal. And, then ask users to re-upload the data with correct Reversal reason and date.
These fields,being critical fields, are non-modifiable as per standard. And, I wouldn't recommend to make them changeable. Let's treat the cause and not effect!
Upload program must be modified to make these fields mandatory to avoid this kind of errors in future.
Thanks,
Nirav

How to clear a cursor list without clearing the first row??

Hi all, good to see ya ...
I'm having this problem , that i'm using the first row ín a cursor list as a cursor in another graph. The rest of the rows are used as test sets i can add. So when finnish with the tests if some was set, i have to delete or clear the cursorlist(but only the tests and not the first wich is the pointcursor) byy using the graphs cursor list proberty node ' Crsr.List ' and initialising it as showed in picture 1.
Picture 2 shows the cursor list with some test and the cursor name (point cursor) and properties at top. These properties are directly copied to another graph cursor list also at the top and there the point cursor is used as the cursor. The tests are also copied to the other graph cursor list, but when deleting the tests by 'clear button' all data are cleared also the point cursor. That is my problem.
so the question is, how can i clear a cursor list without clearing the first raw and its proberties. any suggestions would be much help for me.
Regards
Zamzam
HFZ
Attachments:
Cursor Palette Front panel.JPG ‏25 KB
cursor paletteA.JPG ‏66 KB
Cursor paletteB.JPG ‏77 KB

Zamzam
The cursor list is just an array so you can delete the elements that you don't want.
David
Message Edited by David Crawford on 06-15-2006 12:46 PM
Attachments:
Delete Cursors.jpg ‏8 KB

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

Clear Data Manager Package Error "The data file is empty."

Hi,
When I run the Clear data package in Data Manager, I receive the error "The data file is empty." I selected a very specific set of dimension values (none are calculated) and am on BPC 7.5 SP3. I subsequently turned on debugging to troubleshoot, but do not see any obvious issues leading the the error message. The log file with debugging turned on is below. Any help would be greatly appreciated!
Thanks.
Tom
TOTAL STEPS 3
1. Export_Zero: completed in 1 sec.
2. Load Cube: Failed in 0 sec.
3. Clear: completed in 0 sec.
[Selection]
ENABLETASK= Yes
CHECKLCK= Yes
(Member Selection)
Category: ACTUAL
Time: 2010.C_SEP
Affiliate: az_swhd
Account: Donor_DART_ID_1
Functional: Benchmark_F
Report: Cons
Restriction: AnyRestricted
[Messages]
The data file is empty. Please check the data file and try again.
[EvModifyScript Detail]
12-28-2010 17:30:05 - Debug turned ON
INFO(%TEMPFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, APPSET, ESMetrics)
TASK(EXPORT_ZERO, APP, CONSOLIDATED)
TASK(EXPORT_ZERO, USER, NESSGROUP\tbardwil)
TASK(EXPORT_ZERO, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
TASK(EXPORT_ZERO, DATATRANSFERMODE, 2)
TASK(LOAD CUBE, APPSET, ESMetrics)
TASK(LOAD CUBE, APP, CONSOLIDATED)
TASK(LOAD CUBE, USER, NESSGROUP\tbardwil)
TASK(LOAD CUBE, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(LOAD CUBE, DATATRANSFERMODE, 4)
TASK(LOAD CUBE, DMMCOPY, 0)
TASK(LOAD CUBE, PKGTYPE, 0)
TASK(LOAD CUBE, CHECKLCK, 1)
TASK(CLEAR COMMENTS, APPSET, ESMetrics)
TASK(CLEAR COMMENTS, APP, CONSOLIDATED)
TASK(CLEAR COMMENTS, USER, NESSGROUP\tbardwil)
TASK(CLEAR COMMENTS, DATATRANSFERMODE, 0)
TASK(CLEAR COMMENTS, SELECTIONORFILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(CLEAR COMMENTS, ENABLETASK, 1)
TASK(CLEAR COMMENTS, CHECKLCK, 1)
INFO(%ENABLETASK%, 1)
INFO(%CHECKLCK%, 1)
INFO(%SELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%TOSELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%APPSET%, ESMetrics)
INFO(%APP%, CONSOLIDATED)
INFO(%CONVERSION_INSTRUCTIONS%, )
INFO(%FACTCONVERSION_INSTRUCTIONS%, )
INFO(%SELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\FROM_51_.TMP)
INFO(%TOSELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\TO_51_.TMP)
INFO(%DEFAULT_MEASURE%, PERIODIC)
INFO(%MEASURES%, Periodic,QTD,YTD)
INFO(%OLAPSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%SQLSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%APPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\)
INFO(%DATAPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\DataFiles\)
INFO(%DATAROOTPATH%, C:\BPC\Data\WebFolders\)
INFO(%SELECTIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\SelectionFiles\)
INFO(%CONVERSIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\ConversionFiles\)
INFO(%TEMPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\)
INFO(%LOGICPATH%, C:\BPC\Data\WebFolders\ESMetrics\Adminapp\CONSOLIDATED\)
INFO(%TRANSFORMATIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\TransformationFiles\)
INFO(%DIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time])
INFO(%FACTDIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID])
INFO(%CATEGORY_DIM%, [Category])
INFO(%TIME_DIM%, [Time])
INFO(%ENTITY_DIM%, [Affiliate])
INFO(%ACCOUNT_DIM%, [Account])
INFO(%CURRENCY_DIM%, )
INFO(%APP_LIST%, Consolidated,ES_INC,GrantMgmt,LegalApp,LRate,Ownership,Rate)
INFO(%ACCOUNT_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_SET%, AZ_SWHD)
INFO(%CATEGORY_SET%, ACTUAL)
INFO(%FUNCTIONAL_SET%, BENCHMARK_F)
INFO(%REPORT_SET%, CONS)
INFO(%RESTRICTION_SET%, ANYRESTRICTED)
INFO(%TIME_SET%, 2010.C_SEP)
INFO(%ACCOUNT_TO_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_TO_SET%, AZ_SWHD)
INFO(%CATEGORY_TO_SET%, ACTUAL)
INFO(%FUNCTIONAL_TO_SET%, BENCHMARK_F)
INFO(%REPORT_TO_SET%, CONS)
INFO(%RESTRICTION_TO_SET%, ANYRESTRICTED)
INFO(%TIME_TO_SET%, 2010.C_SEP)
INFO(DATAMGRGLOBALBPU, )
INFO(DATAMGRGLOBALCLIENTMACHINEID, ETSCWLT048794)
INFO(DATAMGRGLOBALERROR, )
INFO(DATAMGRGLOBALPACKAGEINFOR, )
INFO(DATAMGRGLOBALPACKAGENAME, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\PackageFiles\System Files/Clear.dtsx)
INFO(DATAMGRGLOBALSEQ, 51)
INFO(DATAMGRGLOBALSITEID, )
INFO(MODIFYSCRIPT, DEBUG(ON) PROMPT(SELECTINPUT,[CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'),,"SELECT THE MEMBERS TO CLEAR",[Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time]) PROMPT(RADIOBUTTON,1,"DO YOU WANT TO CLEAR COMMENTS ASSOCIATED WITH DATA REGIONS IN BPC?",1,{"YES","NO"},{"1","0"}) PROMPT(RADIOBUTTON,1,"SELECT WHETHER TO CHECK WORK STATUS SETTINGS WHEN DELETING COMMENTS.",1,{"YES, DELETE COMMENTS WITH WORK STATUS SETTINGS","NO, DO NO DELETE COMMENTS WITH WORK STATUS SETTINGS"},{"1","0"}) INFO(C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempfdla_51_.tmp) TASK(EXPORT_ZERO,APPSET,ESMetrics) TASK(EXPORT_ZERO,APP,CONSOLIDATED) TASK(EXPORT_ZERO,USER,NESSGROUP\tbardwil) TASK(EXPORT_ZERO,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(EXPORT_ZERO,SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) TASK(EXPORT_ZERO,DATATRANSFERMODE,2) TASK(LOAD CUBE,APPSET,ESMetrics) TASK(LOAD CUBE,APP,CONSOLIDATED) TASK(LOAD CUBE,USER,NESSGROUP\tbardwil) TASK(LOAD CUBE,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(LOAD CUBE,DATATRANSFERMODE,4) TASK(LOAD CUBE,DMMCOPY,0) TASK(LOAD CUBE,PKGTYPE,0) TASK(LOAD CUBE,CHECKLCK,1) TASK(CLEAR COMMENTS,APPSET,ESMetrics) TASK(CLEAR COMMENTS,APP,CONSOLIDATED) TASK(CLEAR COMMENTS,USER,NESSGROUP\tbardwil) TASK(CLEAR COMMENTS,DATATRANSFERMODE,0) TASK(CLEAR COMMENTS,SELECTIONORFILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(CLEAR COMMENTS,ENABLETASK,1) TASK(CLEAR COMMENTS,CHECKLCK,1) BEGININFO(
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) AS ZEROTABLE GROUP BY [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1) ENDINFO )
Edited by: Tom Bardwil on Dec 28, 2010 5:20 PM

You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) and the release (5.1, 7.0, 7.5) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
I hope you can explain easily because I am a beginner.

First, I couldn't seem to find that example either on computer or on the NI sites.
The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
We're still working on a simpler way to get accurate time.
Rob

How to create a report without any data

HI All, Can anyone help me in writing a report without any data. I want to create a report with list of memebers from a dimension where UDA is "My UDA". I wrote a report "<UDA(CHANNEL,'My UDA')" but this fetches me data too in the report. How to eliminate the data in the report. Thanks Murali

Hi Assuming you are using the essbase report writer the following script will work: { SUPPAGEHEADING } { SUPCOLHEADING } { SUPFORMATS } { SUPFEED } { NOINDENTGEN } { FIXCOLUMNS 1 } <ROW("Dimension") <UDA(Dimension,MyUDA) ! the fixcolumns 1 will ensure that you only get the UDA without it you will get the variable followed by the corrosponding value.

Modify Cube without clear data

Similar Messages

Maybe you are looking for