Modify default value of LoginShell attribute

Hi,
We are configuring the "UNIX Attributes" tab here in our organization.
I've noticed that on the Login Shell option it has a default value: /bin/sh
So I had manually changed it to: /bin/bash
My question is: Is there a way to change the default value to /bin/bash?
Searched for it on ADSI edit and no joy.
PS: Found this website showing that using a special software we can change it.
http://documents.software.dell.com/DOC123819
I just want to change it without that software =]

Hi Vandrey,
Based on my test, we can use the script "Use Get-AdUser / Set-AdObject" to achieve your goal.
Get-AdUser -Filter * | Set-AdObject -Replace @{unixhomedirectory='/bin/sh','bin/bash'} -WhatIf
"please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to another community members reading the thread."

Similar Messages

  • How to modify default value of Login Shell attribute via script

    Hi all,
    I'm configuring the "UNIX Attributes" tab here in Active Directory Users and Computers. I've noticed that on the Login Shell option it has a default value: /bin/sh. So I had manually changed it to: /bin/bash.  I just change this value one
    bu one manually.  Now, I want to change this value for all users via script. Could you please help me to receive this goal?
    Thank you in advance.

    Use Get-AdUser / Set-AdObject
    Get-AdUser -Filter * | Set-AdObject -Replace @{unixhomedirectory='/bin/sh','bin/bash'} -WhatIf
    ¯\_(ツ)_/¯

  • Does GTC generate default value for Password attribute.??

    I am using GTC as trusted source reconciliation.
    My doubt is if I don’t map the password attribute does it generate default value to the password attribute in user form??
    I have a random password generator in pre-insert, first i tried as below which didn't work later after updating it worked fine.
    IF (password=null)
    Generaterandampassword
    SetPassword= Generaterandampassword
    If i use adapter as above it not generating random password. i see that password as 'temp' to all the users.
    I am thinking gtc generates a value to password filed even if we don't pass any value... am i right?? Please let me know..
    Thanks..
    Edited by: IDMuser19 on Aug 17, 2010 10:30 AM

    Hey,
    See if this helps.......
    http://www.oracle.com/technology/obe/fusion_middleware/im1014/oim/obe12_using_gtc_for_reconciliation/using_the_gtc.htm
    Regards,
    Sunny Ajmera

  • Modify default value for static parameter field programmatically

    Hi,
    I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
    I was even able to modify the default values for the parameters, which are used for scheduling of each report.
    But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
    This is what I have tried so far:
    Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
    Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
    Any help will be appreciated.
    It would be great to know if someone of you has already implemented successfully such a use-case.
    Regards,
    Stratos
    Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
    Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

    Hi,
    For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
    - Bhushan

  • Default value on navigational attribute

    Hi,
    I have encountered following issue:
    - need to create variable entry with default values on characteristic (plant type) which is naviational attribute of another one (plant)
    - default value needs to exclude one of the possible values (plant types SC)
    So I created simple manual entry variable (multiple values) and selected 'SC' as to be excluded (red '=' icon in default values tab).
    Problem - in pop-up values appears correctly !SC, but whenever I click CHECK or OK, value gets immediatelly changed to SC (i.e. =SC instead of <>SC).
    I have no idea why is that and what to do to make it working.
    Thanks in advance for your suggestions.
    Marcin

    I cannot set include values, this needs to be exclude there is a requirement I can satisfy only in that way (for some data plant does not exist so if I put include plant types, then it will filter out all such records).
    is there any limitation for setting default values on variables created on NAV attr?

  • Allowing user to modify default value - is this possible?

    A report needs to be produced with the default value of an input variable (0FISCPER) set to the current fiscal period - this is used to calculate the YTD and Full Year Forecast of the present year. The default is required to allow the user the view the present day information without having to enter the current date manually - i.e. <b>no pop up variables screen</b>.
    The complication occurs when it is required for the user to be able to modify the input variable to view historical data. Is it possible for the end user to adapt the current default (i.e. the current month) to a month of his/her choice?

    Thanks all - I've been experimenting a bit over the past few days with this. This is my situation so far:
    The Year-to-Date and Forecast variables take in 0F_FPER as its input - 0F_FPER is a user entry variable.
    There is a user exit variable which exists in the system which returns the current fiscal period called 0FPER. I need this variable to be the YTD and Forecast default inputs <i>without the variables entry screen popping up</i>.
    Once the user is in the report, it is required to be possible for them to enter a date (it may be in the previous year) to allow them to view historical data.
    <u>What I am thinking about doing is creating new YTD and Forecast variables that will take 0FPER in as an input.</u>
    However, 0FPER is hardcoded to return the current fiscal year. <b>Is it therefore possible to allow the user to input another value into 0FPER? Would this not conflict with the coding?</b>

  • How to set default value to user attribute in customized information tab

    Hi Experts,
    we created a custom attribute in Administration-managed custom attributes  and now we are getting that attribute under customized information tab in  user admin->identity management.
    This attribute is coming for all users and it is working fine and I can give value to this attribute also.
    Now the problem is we have more than 10000 users in the portal and we have to assign same value to this custom attribute to all the users.
    Is there any possiblity of setting the value to all the user without coding.
    If it is not possible then how can I proceed for coding.
    any help will be appreciated.
    Raghu

    Hi Michael,
    Yes my data source is LDAP.  This attribute is added in the portal itself and I don't think it is possible to set the value of custom attribute at LDAP.
    Shanta : We already created the custom attribute and it is also appearing in the Customized information
    Problem is we need to set a value to that attribute. This should be same to all the users coming from LDAP.
    My Basis people are asking the funtion module which calls when we click on the Customized information tab.  Is that possible to know?
    Or we can set this value by writing a piece of code in webdynrpo java?
    Appreciate your inputs
    Raghu

  • Defaulting value from one Attribute to another.

    Hi,
    I am trying to add a new item (Message Text Input), to the iExpense Header (/oracle/apps/ap/oie/entry/header/webui/GeneralInformationPG), and default the value of this filed to the 'Justification' field, at line level ( /oracle/apps/ap/oie/entry/lines/webui/CashAndOtherLinesPG).
    I am trying to use Personalization to copy the value from the new field. So for the 'Justification' field, I set the initial value as: ${oa.ExpenseReportHeadersVO.field1}.
    However, I cannot see the initial value appear when i try to enter an expense report.
    1) Is this not the correct way of setting/defaulting values?
    2) Expense Lines is a multi-record page. I want the above defaulting logic to apply ONLY when a user enters a new line. Can this be handled through personalization? Or will it require any programming?
    We are on 11.5.10CUP4, 11i.OIE.K
    Thanks,
    Ashish

    Yes.. that's exactly what I'm trying to achieve. The user enters the 'Project Name' at expense Header level, and this value defaults to the 'Project Name' field at line level. Also, at line level, this field should NOT be updateable by the user.
    To minimize customization, I was thinking of using DFF at the Header level to capture the Project Name, and then default this value at line level.
    Is there any way I can do this using Personalization? Reason being I need to put the estimates accordingly.
    Thanks for you suggestions.
    Ashish

  • What is the default value length for attribute?

    I have found that there is no limit for the value length about the attribute directorystring.
    Is it right?
    Another question is:
    I created an attribute with the "multi-valued".
    How many values can i add into the same entry?
    Thank u very much.

    Correct. By default, there is no limit for the value length. However, it is possible to limit the max length for a given attribute type by specifying the max length in curly bracket in the schema definition e.g.
    attributetype ( 2.5.4.41 NAME 'name'
    EQUALITY caseIgnoreMatch
    SUBSTR caseIgnoreSubstringsMatch
    SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{32768} )
    The value {32768} indicates the maximum length of the string and is optional.
    There is no limit in the number of attribute value too (as long as you have enough memory and disk to process it) . However, keep in mind that most directory servers limit the length of the LDAP PDUs, so you might have to change these settings if you want to create or search for very big entries.

  • Migration issue on default value for transient attribute in 11.1.2

    Experts,
    I migrated my JDev 11.1.1.5 project to JDev 11.1.2. After successful migration i began to run the project and it ran without issue. In the application however when i clicked on any link or button i get the following exception
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=Cannot get property 'saleType' on null object
    Caused by: java.lang.NullPointerException: Cannot get property 'saleType' on null object
         at org.codehaus.groovy.runtime.NullObject.getProperty(NullObject.java:56)
         at org.codehaus.groovy.runtime.InvokerHelper.getProperty(InvokerHelper.java:154)
         at org.codehaus.groovy.runtime.callsite.NullCallSite.getProperty(NullCallSite.java:29)
         at org.codehaus.groovy.runtime.callsite.AbstractCallSite.callGetProperty(AbstractCallSite.java:237)
         at bc4j_com_xxx_portal_model_uiView_SaleVO_SaleTypeTransient_null_gs.run(bc4j_com_xxx_portal_model_uiView_SaleVO_SaleTypeTransient_null_gs.groovy:1)
         at oracle.jbo.ExprEval.internalEvaluateGroovyScript(ExprEval.java:1200)
    In my SaleVO i have a transient attribute whos value is set as
    adf.userSession.userData.saleType == 'ORGANIZATION' ?
                               'LOV_PartyTypeOrg' : 'LOV_PartyType'When i print the value from user session i am getting a value there, so a bit confused about the NPE here.
    Please advice
    Jdev 11.1.2

    Hi,
    this is something you should report to customer support to have them looking at this and helping you out
    Frank

  • Approach to customize workflow - setting default values of attributes

    Hello Friends,
    I have a requirement to customize the standard workflow - PO Requisition Approval & PO Create Documents. I want to change the default value of certain attributes in both the workflow.
    Generally workflows are customized through process customization (create a new process by copying the main process (which gets called) and customize it under the same 'Item type' ) but if we just need to change the default value of attributes , do we create a new 'Item type' and set the attribute values or any other approach? If we make the change in the seeded workflow , whichever OU use that workflow will see the changes in functionality.
    The requirement is very common and even Oracle has mentioned that buisness should set these attributes to suit their business needs.One such attribute is 'Is Automatic Creation Allowed' (Should PO be created from iProc requisition without user intervention)
    What is the recommended/best way forward.
    Please suggest , thanks !!
    Regards,
    Amit

    You can simply update the wf_item_attributes table.
    Set text_default to Y WHERE name = 'CONT_WF_FOR_AC_REL_GEN'           
    Hope this helps
    Sandeep Gandhi
    Independent Techno-functional Consultant

  • What is the default value of boolean type transient attribute in VO?

    Hi All,.
    jdev version-11.1.2.1.0
    i have created one vo based on eo where i add one boolean type transient attribute Marked(uihint checkbox).
    now i have apply view criteria on this vo.
    like---
         ViewObject vo=getView(iterator);
         vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
         ViewCriteria vc=vo.createViewCriteria();
         ViewCriteriaRow vcr=vc.createViewCriteriaRow();
         vcr.setAttribute("Marked", "true");//Setting attribute on view criteria.
           vcr.setConjunction(ViewCriteriaRow.VCROW_CONJ_AND);
           vc.setCriteriaMode(ViewCriteria.CRITERIA_MODE_CACHE);
         vo.applyViewCriteria(vc);//Apply view criteria on vo.
         vo.executeQuery();
         vc.add(vcr);
       vo.executeQuery();this code running fine and that is selected only those row which i have cheked.
    but now i want to apply view criteria that select select those rows that are not checked.
    like-
    vcr.setAttribute("Marked", "false");but it is not return any row.
    if select checked any row and then uncheked that row so marked attribute for this row set false. but rows that are unchecked by default not return.
    so my question is that what is default value of Marked attribute when user not take any action i will try
    vcr.setAttribute("Marked","null");
    but not working.

    i have tried this but this is not working.
    follwing code working for Null case not for False
    vcr.setAttribute("Marked","is null"); this code display all rows who has null but when i checked any row and then unchecked so that row get value "false" also not display.

  • Passing Database Constant as a default value to EBS TCA API??

    My synch BPEL process calls EBS TCA (Trading Community Architecture) APIs via Apps Adapter to create and update Organizations (Parties) and Customers (Accounts) accordingly. TCA provides two types of APIs to do the same job - one uses record types and tables as parameters, while the other uses object types as parameters and is called Business Object(BO) API. I am using BO for my solution.
    One of the features of the Update API (hz_org_cust_bo_pub.*update*orgcust_bo) is you can pass a database constant (FND_API.G_MISS_CHAR) as a parameter value in order to nullify an existing value. Ex: AddressLine2 for a customer address has now changed and does not exists anymore. In order to update and existing value to NULL, you are required to pass one of the following constants as a parameter value.
    Following is a formal description of these optional parameter values from the TCA Reference document.....
    Optional IN parameters do not have default values. An attribute value that is not
    passed in is assumed to have a default of null for a Create API. For an Update API, if a
    particular attribute value is not passed into the API, then the database retains the
    existing value. In order to set a database value to null, the calling program must
    explicitly set the attribute value to one of the following constants, based on the data
    type of the attribute.
    +• FND_API.G_MISS_NUM for NUMBER type. (or FND_API.G_NULL_NUM)+
    +• FND_API.G_MISS_CHAR for VARCHAR2 type. (or FND_API.G_NULL_CHAR)+
    +• FND_API.G_MISS_DATE for DATE type. (or FND_API.G_NULL_DATE)+
    ISSUE:
    I am unable to pass and have the value FND_API.G_NULL_CHAR be treated as a constant by the API. When this value is passed by the BPEL process to the Apps Adapter (API) it gets passed as a string literal, as such, does not get treated as a database constant by the API. Also, on creating the apps adapter for this particular API (TCA BO) a wrapper program is NOT created. So, I can't modify the wrapper (as it does not exist) to pass this FND_API constant. The only option I can currently think of is to write my own custom PL/SQL package that calls the standard API and in turn have the custom package be called by the apps adapter. But, I am hoping this is not the only option, it takes away several benefits.
    Any thoughts will be greatly appreciated.
    ilyas

    I think that may be your only option. I haven't implemented this using the Apps Adapter but in order to get this functionality you need to have implmented the security architecture where you login as an Apps User, not APPS.
    I would raise a SR for this as this may be a bug.
    cheers
    James

  • What is the Best Approach for System Defined Fields and Default values

    Hi ,
    Please let me know that what can be the best approach for providing a Default value for the System defined fields when creating a User and How can we hide the System defined fields at the time of User creation

    You cannot provide default values for any attributes defined in the FormMetaData.xml file. You can only provide default values for fields defined in the User Defined Fields and supply a default value.
    You can using entity adapters to populate some of the values, but you must supply an Organization because there is an entity adapter that you cannot modify that verifies the organization name.
    -Kevin

  • SUN ONE Ldap - Default value is not getting displayed

    Hello,
    I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
    The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
    Can any one help me in this for this issue.
    Regards,
    K. Senthil Kumar

    I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.

Maybe you are looking for