What is the default value length for attribute?

I have found that there is no limit for the value length about the attribute directorystring.
Is it right?
Another question is:
I created an attribute with the "multi-valued".
How many values can i add into the same entry?
Thank u very much.

Correct. By default, there is no limit for the value length. However, it is possible to limit the max length for a given attribute type by specifying the max length in curly bracket in the schema definition e.g.
attributetype ( 2.5.4.41 NAME 'name'
EQUALITY caseIgnoreMatch
SUBSTR caseIgnoreSubstringsMatch
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{32768} )
The value {32768} indicates the maximum length of the string and is optional.
There is no limit in the number of attribute value too (as long as you have enough memory and disk to process it) . However, keep in mind that most directory servers limit the length of the LDAP PDUs, so you might have to change these settings if you want to create or search for very big entries.

Similar Messages

  • What is the default value of EO_INBOUND_PARALLEL

    Hi Gurus,
    We are on PI 7.0 EHP 1. We have not set the parameter EO_INBOUND_PARALLEL. Does this mean there is only one inbound queue registered by default if the default value is 1? However, I seem to recall that when we had issues with messages stuck in queues, I have seen more than one XBTI8 queues.
    Please help me with my doubt. thanks!

    Hi,
    Thanks for the replies.
    How about the parameter EO_INBOUND_TO_OUTBOUND and EO_OUTBOUND_PARALLEL?
    I assume by default EO_INBOUND_TO_OUTBOUND is set to 1?
    Then what is the default value for EO_OUTBOUND_PARALLEL? Plus to set this parameter you need to specify the receiver, in this case, is it true that EO_OUTBOUND_PARALLEL is not set at all so only one outbound queue? this does not make sense. Or maybe by default EO_INBOUND_TO_OUTBOUND is set to 0 so EO_OUTBOUND_PARALLEL is not used at all?
    Thanks.

  • What is the default log filename for connector logging in Weblogic 9.x?

    According to the JCA 1.5 Specification -
    The ApplicationServer manages the association of output stream with the ManagedConnectionFactory.
    http://java.sun.com/javaee/5/docs/api/javax/resource/spi/ManagedConnectionFactory.html#setLogWriter(java.io.PrintWriter)
    So setLogWriter() is called by WebLogic 9.x for the ManagedConnectionFactory.
    My observation is that even if no <log-filename> is specified in weblogic-ra.xml of the resource adaptor , the value of the PrintWriter set on the ManagedConnectionFactory is not null
    eg java.io.PrintWriter@404c51.
    So my question is that in case no <log-filename> entry is specified in weblogic-ra.xml of the resource adaptor , what is the default value of the logfile to which the connector logging messages will be redirected?

    your home folder should have the permissions set as you state them.
    Everything inside your home folder (like Music, Documents and others) should be more like
    you: read&write
    staff: no rights
    everyone: no rights
    but if you are the only user of your Mac, these settings have little importance to you.
    to repair the permission boot into recovery (pressing command + R before you hear the start up sound. Then start Disk Utility from the Utility menu and choose Repair permissions. See this article for a detailed set of instructions. It's a little older, but still valid-

  • What is the default value of Vector?

    what is the default value of the Vector? now another main thing i have generate one vector with fix size like
    Vector v=new Vector(5);
    now the thing is that suppose i add sixth element at that time it's size will be 10 or will be 15.
    Vector v1=new Vector(15);
    now i add 16 the elment so at that time vector size is 25 or it will be 30??

    ya i get it your point let's i explain which i understand from your side ok
    Vector v=new Vector(10,15)
    so in this case it's size is 10 right when i add 11the element at that time it's size is 25 right?
    Vector v1=new Vector(5);
    in this case the it's size is 5 right and when i add 6th element at that time it's size will be double in short 10 in this case right.
    Vector v2=new Vector();
    in this case the default size is 10 right when i add 11th element at that time it's size is 20 right
    If my understanding is wrong then pl'z explain this thing with examples
    waiting for your reply.

  • What is the default exception aggregation for the NCKF IO STOCK

    Hi all of you,
    What is the default exception aggregation for the Non Cumulative Key Figure info object Stock?
    When I am selecting Maximum, or minimum or Avereage (all values) its not selecting any of these values but only Average (weighted with the number of days) is getting selected.
    Please explain.
    Thank you.
    TR.

    Hi Vinod,
    Thank you for your reply.
    I had selected Last value as exception aggregation and activated it. But again when I double click on the IO STock, in the aggregation tab besides exception aggregation I find the option Average (Weighted with the number of days).
    Is it getting selected by default when I check the radio button Ncum. value with in- and out-flow?
    Please explain.
    Thank you.
    TR.

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • What is the default payroll frequency for Pay Scale Structure ?

    Hi,
    What is the default payroll frequency for Pay Scale Structure? How is it attached to Pay Scale Structure?
    Saurabh Garg

    Hi
    The default frequency for any payroll run is 'monthly', which is subjected to manipulation according to ones requirements
    Regards
    Sudhir.

  • What is the default ip address for the Time Capsule and Airport Extreme?

    What is the default ip address for the Time Capsule and Airport Extreme?

    Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

  • What is  the default value of iterator's rangesize in pageDef.xml

    there are two jspx file,one named by browsePage,another editPage.they use the same VO. and i can go into editPage from browsePage by commandButton or commandLink .
    the rangesize of the iterator in browsePage is 10, like this
    <iterator id="SysTabColorView1Iterator" RangeSize="10"
    Binds="SysTabColorView1"
    DataControl="SysManageAppModuleDataControl"/>
    usually in editPage, it like the following
    <iterator id="SysTabColorView1Iterator" RangeSize="10"
    Binds="SysTabColorView1"
    DataControl="SysManageAppModuleDataControl"/>
    now i have a question ,when i dont set the value of RangeSize in editPage, what is the default value of this iterator.
    other business, when i set the value to 1 , it will occur the famous error ,
    JBO-

    Hi,
    if you are browsing to the edit page from the browse page it doesn't matter what the range size is. If you've navigated though the ranges on the browse page then you will be in the correct range set and ranging won't be a problem.
    Brenden

  • What is the default icon size for macbook pro 13 inch?

    I have the 13 inch macbook pro, its not the retina. What is the default icon size for it? I accidently changed it on the show view options.

    The default size is not related to the Mac Model, it's related to the OS X version. For Snow Leopard it's 48x48 pixels.
    For Lion and Mountain Lion it's 64x64.
    You can choose the size that is right for you. I typically use either 32x32 or 36x36. Some prefer larger some prefer smaller. It's up to you.
    I've always found the default sizes to be too big for my taste.

  • What is the default restrictions passcode for iPad mini?

    Can anybody tell me what is the default restrictions passcode for iPad mini MD528LL ?
    I have never set one and don't know why it's there.
    I am on the 5th try now.. and don't want to lock it down if the 6th try is incorrect....
    Thanks,

    Thanks Chris.
    I did not use Exchange account .....
    or is there a way to reset the numbers of passcode tries? I am now on the 5th try, if I can roll it back to 0, I can give it few more tries and see if I can hit the lottery...

  • What are the different values available for type attribute

    Hi,
        I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
         Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
    Thanks in Advance,
    Murthy.

    Does this help
    tring
        Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
    CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
    VARCHAR: Varying-length character strings.
    CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
    GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
    VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
    DBCLOB: Varying-length strings of double-byte characters in a large object.
    |BINARY: A sequence of bytes that is not associated with a |code page.
    |VARBINARY: Varying-length binary strings.
    BLOB: Varying-length binary strings in a large object.
    |XML: Varying-length string that is an internal representation |of XML.
    Numeric
        Data that contains digits. Numeric data types are listed below:
    SMALLINT: for small integers.
    |INTEGER: for large integers.
    |BIGINT: for bigger values.
    DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
    |DECFLOAT: for decimal floating-point numbers.
    REAL: for single-precision floating-point numbers.
    DOUBLE: for double-precision floating-point numbers.
    Datetime
        Data values that represent dates, times, or timestamps. Datetime data types are listed below:
    DATE: Dates with a three-part value that represents a year, month, and day.
    TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
    TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
    Regards
    Ravi

  • What are the default values for "default if unwired"?

    How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
    Is there a listing somewhere of what default values will be?
    Thank you,
    cayenne

    tst wrote:
    Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
    More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Outp​ut-tunnels-from-event-structure-should-default-to-​...
    VERY much agreed!  Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • What is the default value of boolean type transient attribute in VO?

    Hi All,.
    jdev version-11.1.2.1.0
    i have created one vo based on eo where i add one boolean type transient attribute Marked(uihint checkbox).
    now i have apply view criteria on this vo.
    like---
         ViewObject vo=getView(iterator);
         vo.setQueryMode(ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
         ViewCriteria vc=vo.createViewCriteria();
         ViewCriteriaRow vcr=vc.createViewCriteriaRow();
         vcr.setAttribute("Marked", "true");//Setting attribute on view criteria.
           vcr.setConjunction(ViewCriteriaRow.VCROW_CONJ_AND);
           vc.setCriteriaMode(ViewCriteria.CRITERIA_MODE_CACHE);
         vo.applyViewCriteria(vc);//Apply view criteria on vo.
         vo.executeQuery();
         vc.add(vcr);
       vo.executeQuery();this code running fine and that is selected only those row which i have cheked.
    but now i want to apply view criteria that select select those rows that are not checked.
    like-
    vcr.setAttribute("Marked", "false");but it is not return any row.
    if select checked any row and then uncheked that row so marked attribute for this row set false. but rows that are unchecked by default not return.
    so my question is that what is default value of Marked attribute when user not take any action i will try
    vcr.setAttribute("Marked","null");
    but not working.

    i have tried this but this is not working.
    follwing code working for Null case not for False
    vcr.setAttribute("Marked","is null"); this code display all rows who has null but when i checked any row and then unchecked so that row get value "false" also not display.

  • What are the default values for dom.max_chrome_script_run_time for FFVersions 25 through 30 ?

    I have run across issues that creep up. The timeout setting of
    dom.max_chrome_script_run_time
    seems to be 20 seconds in FF 25.0.1 and 10 seconds in FF 30
    I was wondering if you have release notes for all versions from
    [25, 30] so that I can know all of the different timeout values?
    Thanks,
    -Charlie

    Can you post a screenshot that shows a different default value of one of those prefs?
    Note that it is possible to modify the default value via a mozilla.cfg file in the Firefox program folder.
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Maybe you are looking for