Modify Flvplayback skin with counter problem

Hi
I am trying to customise a FLVPlayback Skin that has a counter in it, (MinimaFlatCustomColorPlayBackSeekCounterVolMute.fla)
If i modify any of the skins without a counter there is no problem however when i try to publish one of the skins with a counter i get these compiler errors:
Warning: unable to load SWC FLVPlaybackAS2.swc
1046 type was not found or was not compile time constant: NetstreamPlayOptions
Any ideas?
cheers
Grant

Hi,
Someone had found a workaround
"Just remove all from your source paths in the publish settings when you look to ActionScript 3.0 setting for your Skin FLA ! ( as default you can see here some path to video folder where is SWC files)"
but the counter prolem remains as the counter does not work in this case ...
may be someone has a better solution can reply ...
Cheers

Similar Messages

Is there a way to use/fix FLVPlayback skins provided with the product?

Some of the "skins" for the FLVPlayback component cannot be used as delivered in the Flash Professional CS5 package.
For instance, if you try simply to run the .swf file: MinimaSilverPlayBackSeekCounterVolMuteFull.swf in Program Files/Adobe/Adobe Flash CS5/Common/Configuration/FLVPlayback skins/ActionScript 3.0, you get the following error message:
VerifyError: Error #1014: Class fl.video::UIManager could not be found.
Such a skin cannot be used in a published application (though it will work within the Flash IDE in Test mode).
Not all the skins have this problem. However, at least all of the Minima prefixed ones do. Of course the one I wish to use is broken. Is there a way I can fix this? If I try to publish the corresponding .fla (in FLVPlayback skins/FLA/Action Script 3.0 I get "Warning: unable to load SWC FLVPlaybackAS2.swc".

Well I don't really understand the position you are taking here. Did you try to run the examples I gave?
I will be a sport, though, and back up here and explain more fully.
I had originally built a rather trivial application to experiment with the FLVPlayback component. I did this with AS-3, by the way.
As I tried different skins I found, strangely, that when I used one of the Minima ones (for instance, the one that I listed several times above), that it would run fine in the IDE in test mode, however when I ran the published application it would not run correctly. It generated instead this error message about the fl.video class not being found.
In trying to determine the cause of this, I found that this same error would be generated, just by trying to run the Minima skin (swf) in the Flash player by itself. And sure enough those skins that did NOT have the problem with my trivial app also did not generate any error when the swf was run in the Flash player.
So, as you hopefully can see, I took my application out of the equation here. The question of interest is why do some of the unmodified swf skin files generate the class not found error and can they be fixed (or is there anything I can do to fix them) so that error does not happen. I had even tried to use the original FLA file for the skin (as I described in my earlier post) and recompile it. However that caused a compile error (listed in the original post) that is indicative of some AS2 being mixed in, possibly from some sub-component.
So I guess all I was hoping for was that you would try to run the AS3 Minima...swf skin listed earlier straight from the product installation. Just run it with the Flash player. If it doesn't generate the error for you then perhaps there is something odd about my CS5 installation, or environment, or ...
If you don't want to try this, that is your perogative. Perhaps someone else can/will. Or perhaps I can submit this as a bug? (I do not know the mechanism for that)
I am not trying to be argumentative here. Rather, I have tried to isolate the issue. I don't know how else I can make this clear.

I cannot install itunes on my windown 7 laptop. Error says "computer not modified". Please help me with this problem.

I cannot install Itunes and Icloud on my Sony Vaio Laptop - Window 7. Error says " computer/system not modified". Please help me with this problem.

Hello there, jag123059.
The following Knowledge Base article offers up some great steps to follow for resolving issues with installing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Should Device Test find problem with counter?

Hello!
I am have one problem with PCI 6251 board. It seems to me that something happening with counter 0. Several days ago everything was ok, but now any counter output does't appears on its terminal (on BNC 2120 block). When I see at the signal from it on the oscilloscope, I can see right shape of the pulses, but about 10 mV amplitude. Everyting is perfect with counter 1 output.
OK, I run the self-test and it is passed. I have tried to reset the devce and try again - the same result. Self-test is passed, but counter 0 seems to be not functioning.
Is it another possibility to check the device?
Thanks in advance!

Hi Baturin,
It is quite possible that your BNC connector has problems. If you were able to route the output of Counter 0 to a PFI line, and able to see a good signal, then your terminal block is at fault. The first things you should look for are the pins. Sometimes, the pins on the connectors are bent, and thus do not provide a reliable contact. Second thing you should look for is any external damage. Finally, use the test panel in Measurement and Automation Explorer (MAX), in the counter tab to test the card (which is probably what you are already doing).
If all of the above still seem to confirm your initial diagnostic of a bad BNC connector and a good M series card, then please call us. We would then do a final troubleshooting before sending your BNC connector back to be repaired.
Thank you and best regards,
Nathan
Applications Engineer
National Instruments

Reference to FLVPlayback Skin object

So I have a problem with the FLVPlayback. I'm using a
customized version of the SteelOverPlaySeekMute skin, and it works
very well. The only problem is, that Macromedia coded the
FLVPlayback.skinAutoHide poorly, in that it only hides when an
onRollOut is triggered for your FLVPlayback. However, if the
FLVPlayback is the same size as your Stage, this will NEVER get
triggered. I'm finding a way around this by using a MouseListener
with a setInterval to hide the controls by changing the
FLVPlayback.skin to an empty string, and then back to my custom
skin when the mouse moves again. However this is a very clunky
method of handling it, and when the skin first loads back again
after hiding, the playback handle is at the begining and then jumps
to the right position. It's kinda ugly.
So is there any way to reference my skin object so I can set
the _alpha property or something, or do I need to go and code my
own custom UI?

Hi all ,
I'm totally no where by this statement :
" In Practice, a reference argument is anothercopy
y of a reference to the Orginal object "
can any one please explain me further ?In Java there are two kinds of variables. Onewhich
holds the value of a primitive (like say an int)and
another which holds a reference to an object.
Both types of variables are passed in the same wayto
methods. A copy of the content of the variable is
assigned to the method parameter. So in the case ofa
primitive it's a copy of a value and in the caseof
an object its a a copy of a reference.Sorry , But I remember I read in java all the
arguments are by Value and NOT by reference .....
Is that diff for object and primitive type ?Arguments are passed by value.
As UJ said, that value might be a primitive, or it might be a reference. A variable's value is NEVER an object in Java.
http://javadude.com/articles/passbyvalue.htm
http://java.sun.com/developer/JDCTechTips/2001/tt1009.html#tip1
http://www.javaranch.com/campfire/StoryPassBy.jsp
http://www.javaworld.com/javaworld/javaqa/2000-05/03-qa-0526-pass.html
http://www-106.ibm.com/developerworks/library/j-praxis/pr1.html
http://www.cs.toronto.edu/~dianeh/tutorials/params/
http://java.sun.com/docs/books/jls/second_edition/html/classes.doc.html#38698
http://radio.javaranch.com/channel/val/2004/05/21/1085125887000.html

Website is now in centre of page, built new site using "cc" but with some problems

Hello everyone I said I would come back with the new site, and just as well as I'm having one or two small problems, starting with!
New Website, rollover buttons not holding colour in place when clicked
And someone has told me that it is a great site, but the images in the box with the yellow frame dont show up unless I tilt the screen at an odd angle, I think he means the hero image! and is sounds
like he is using a tablet
I have built this new site using the tutorial by David Powers http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.htm l sent to me by by Hans-Günter
I might have made one or two mistakes when building this site, I take my hat off to you Web Designers, this has taken me a week to build you could have dune it in about two hours lol
Please can someone have a look, and help me out with the problems that need a fix
Thank you so much for your time
This was the old website
This is the new website
The Website Address is http://www.lawrenceg.com
This is the code from the Index.html page
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Home Page</title>
<link href="styles/main.css" rel="stylesheet" type="text/css">
<style type="text/css">
body,td,th {
color: #999999;
</style>

<script src="jQueryAssets/jquery-1.8.3.min.js" type="text/javascript"></script>
<script>
var __adobewebfontsappname__="dreamweaver"
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
<script src="http://use.edgefonts.net/source-sans-pro:n6,n2:default.js" type="text/javascript"></script>

</head>
<body>
<div id="wrapper">
<header id="top">
    <h1><img src="images/contact_page-image_47.png" width="43" height="47" alt=""/> My Studio</h1>
    <nav id="mainnav">
      <ul>
        <li><a href="index.html" class="thispage">Home </a></li>
        <li><a href="About Me.html">About Me</a></li>
        <li><a href="Studio Work.html">Studio Work</a></li>
        <li><a href="The Gallery.html">The Gallery</a></li>
        <li><a href="Contact Us.html">Contact Us</a></li>
      </ul>
    </nav>
</header>
<div id="hero">
    <article>
      <h2> </h2>
      <h2> Welcome to my Studio!</h2>
      <p>My name is Lawrence; I'm a Photographer & Photographic Artist</p>
      <p>        I have kept this website simple and to the point with no unwanted useless stuff, we have a full navigation system for your covenants at the top so you don't have to keep coming back to the home page each time, check us out on <a href="#" onClick="MM_openBrWindow('https://www.facebook.com/LawrencesPhotoStudio','Facebook','location=yes,scrollbars=yes,wid th=1200,height=600')">Facebook</a> <a href="#" onClick="MM_openBrWindow('https://twitter.com/Lawrencegtraing','Twitter','location=yes,scrollbars=yes,width=1200,hei ght=600')">Twitter</a> <a href="#" onClick="MM_openBrWindow('http://www.flickr.com/photos/lawrenceg/','Flickr','location=yes,scrollbars=yes,width=1200, height=600')">Flickr</a> </p>
    </article>
<img src="home_page-image.jpg" alt="Home page image the the studio"/> </div>
<article id="main">
    <h2>This site works best in internet explorer!</h2>
    <p>You can still use google chrome and firefox if you wish, this website just looks slightly better when viewing in internet explorer.</p>
    <p>If you decide to purchase any of our prints, framed prints or canvas! </p>
    <p>Everything comes with 30 day money back guarantee, and is sold through our secure payment site <a href="#" onClick="MM_openBrWindow('http://lawrence-graves.artistwebsites.com/','FineArtAmerica','location=yes,scrollbars=yes, width=1000,height=600')">Fine Art America! </a></p>
    <p>      So how can we help you, are you looking for something a bit special to hang on your wall, maybe you have a family gathering coming up a <a href="#" onClick="MM_openBrWindow('http://weddindimages.blogspot.co.uk/','','location=yes,scrollbars=yes,width=1000,height=80 0')">wedding or an important celebration</a> like a new addition to the family?</p>
    <p>      Maybe you're thinking about that <a href="#" onClick="MM_openBrWindow('http://childrensphotography2013.blogspot.co.uk/','portraits','location=yes,scrollbars=yes, width=1000,height=800')">special portrait of the children</a>, to capture a moment in time can be priceless and don't forget about your baby's first portrait</p>
    <p>      <a href="#" onClick="MM_openBrWindow('http://petsimages2013.blogspot.co.uk/','pets','location=yes,scrollbars=yes,width=1000,heig ht=800')">What about our pets</a> after all they are part of the family too!</p>
    <p>      Sometimes we need a photographer to capture a very special moment, but to capture excellence you need a photographic artist that can produce the results you're looking for</p>
    <h2>Working with Photoshop! </h2>
    <p>Sometimes your standard photographer in not right for some assignments, and you need professional services when it comes to image editing, check out these examples below </p>
    <p>
      <aside class="floatleft"><a href="#"><img src="images/The_art_of_alteringan_image_SMALL.jpg" alt="working in photoshop" width="200" height="140" onClick="MM_openBrWindow('images/The_art_of_alteringan_image.jpg','photoshop1','location= yes,scrollbars=yes,width=1040,height=740')"/></a></aside>
    </p>
    <p>Side by side view, take a look at this image! this was photographed on a apartment rooftop on the Island of Kos in Greece, when the sun was high at around 14:00 on a very hot day. As you can see there are some things that need changing in the image on the left, we only made one or two small changes! to turn this drad looking image into a good looking photo!</p>
    <p> </p>
    <h2>Digital Backgrounds with cover up layer</h2>
    <p>How about a new layered digital background for that special image that needs a full makeover!</p>
    <p>
<aside class="floatleft"><a href="#"><img src="images/pets_small1.jpg" alt="Pet Photography" width="200" height="140" onClick="MM_openBrWindow('images/pets_large1.jpg','PetPhotography','location=yes,scrollba rs=yes,width=1060,height=720')"/></a><br>
</aside>
    </p>
    <p>Check this one out! this one was made up from one of our pet photography photo shoots we did in 2011 for one of our clients, they wanted both dogs in the same portrait but some dogs just don't want to play. So we photographed then separately at the angle we wanted, so they would fit nicely into the new digital background! </p>
    <p> </p>
    <p>These are just some of the adjustment and improvements we can do, you can find more examples of our editing work inside the studio work page!</p>
    <p> </p>
    <p> </p>
</article>
<aside id="sidebar">
    <h2>Check out our Gallery!
    </h2>
    <p>You can view some of our work in the gallery, love Animals then check out some of our wildlife images black and whites, portraits, and pet photography</p>
    <h2>Free reviews and tutorials!</h2>
    <p>You can find some camera, and lens reviews, plus Photoshop and photography tutorials on Facebook and Twitter pages </p>
    <h2>Visit our shop! </h2>
    <p>      Love   Art then check out <a href="#" onClick="MM_openBrWindow('http://lawrence-graves.artistwebsites.com/','','location=yes,scrollbars=yes,width=1000,hei ght=600')">Fine Art America</a></p>
    <p>Every purchase includes a money-back guarantee!</p>
    <div class="floatleft" id="figcaption"><a href="#"><img src="images/What_you_looking_at_small.jpg" alt="Birds of prey" width="200" height="136" onClick="MM_openBrWindow('images/What_you_looking_at.jpg','BirdOfPrey','location=yes,scro llbars=yes,width=1060,height=730')"/></a></div>
    <p align="left">This is just one of many images we have for sale, you can choose from prints, framed print or a canvas we also sell metal print, acrylic print, greeting cards iphone and galaxy phone cases too! </p>
    <h2 align="left">Photo restoration work!</h2>
    <p align="left">We also do some digital photo restoration work; restore them old black and whites! Remove unwanted elements from your photos and more!</p>
    <h2>New digital background sets! </h2>
    <p>      Our Digital Background Sets will come complete with a full cover up layer, set of frames and more </p>
    <p>Each set will come complete with a video tutorial showing you how to use these fabulous sets with your own images</p>
    <p>Sets due to be launched in 2014 </p>
    <p>Or if you prefer you can simply send us your images and let us do the work for you </p>
    <p>We only charge a small fee for this service!</p>
    <p> </p>
</aside>
<footer>
    <p>© Copyright 2013 my studio at lawrenceg.com</p>
</footer>
</div>
</body>
</html>

Lawrence g photos 2010 wrote:
New Website, rollover buttons not holding colour in place when clicked
On each of your pages you need to add the class="thispage" to your anchor tags.
So the 'About Me' page link looks like below:
<li><a href="About Me.html" class="thispage">About Me</a></li>
'The Gallery' link on the 'Gallery' page looks like this:
<li><a href="The Gallery.html" class="thispage">The Gallery</a></li>
Do the same for the 'Studio Work' and 'Contact Us' pages.
Lawrence g photos 2010 wrote:
And someone has told me that it is a great site, but the images in the box with the yellow frame dont show up unless I tilt the screen at an odd angle, I think he means the hero image! and is sounds
like he is using a tablet
They are all quite a subtle grey tone but the one I cannot see is on the 'About Me' page. You just need to bring the grey tone up a few stops.

ITunes sync with iPhoto Problem

Hi everybody,
i'm experiencing a tedious issue with iTunes and the iPhoto syncronization with i-devices.
I'm running iTunes 10.4 , iPhoto 9.1.5 and i have an iPhone 4 and an iPad both running iOS 4.3.5.
When i sync my iPhone with iTunes i usually chose only 3 separated iPhoto events and no problems occurs in copying the photos on the device.
When i sync my iPad instead i get the following problem:
the same as with the iPhone i choose a limited number of iPhoto events to sync with the iPad but the photos count shown in the iTunes screen is a lot different then the real number of the photos in the iPhoto events. To be clear:
Event 1 contains 300 photos in iPhoto
In the syncing screen of iTunes for the iPad Event 1 contains only 3 photo.
As a result only 3 photo are transferred to the iPad.
I tried to repair and rebuild the iPhoto library (alt+cmd+start iphoto) selecting all the options except the rebuild database from backup option. Nothing changed.
I tried to reset iphoto syncing with the iPad doing as follow:
connect iPad
select "don'y sync photos"
choose "Erase all photo from the Device"
disconnect
Reboot both devices
reconnect iPad
choose sync again.
Nothing changed again
At last i tried to erase the content of the "ipod photo cache" folder as suggested in other threads in this forums but when i reconnected the iPad and tried to resync nothing changed.
Beaside that i tried even to control and repair permissions on the entire HD with Disc Utility but again i had no differences with the problem.
Does anybody experienced the same problem? There is any known solution? Anything else i could try?
Thanks everybody in advance for any support given.
Giuliano.

I am having a similar issue. My iPhone 4, my wife's iPhone 3GS and my iPad 2 will start to sync with iTunes on my MacBook (running Lion) and when it begins to import photos from iPhoto, I get a (-50) error and the sync quits. Some events sync just fine but others trigger the error message.
I have deleted the iPod Photo Cache, reinstalled iTunes, reinstalled iPhoto, repaired and rebuilt my iPhoto library, restored my iPhone to factory settings, repaired permissions on my MacBook and anything else I could think of or found in previous postings. Nothing has worked.
Please help! This is incredibly frustrating and no one at Apple has been able to help. Thank you!

Error in CodeFirst Seed with migrations : Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'.

Hi,
I have activated migrations on my Azure Mobile Services project. I filled the new seed function Inside the Configuration.cs class of the migrations. If the tables are empty, the seed function is going without any problems. When my AddorUpdate tries to update
the first object I get the error in the inner exception : "Modifying a column with the 'Identity' pattern is not supported. Column: 'CreatedAt'. Table: 'CodeFirstDatabaseSchema.Category'."
Part of my code is as follows:
context.categories.AddOrUpdate(
new Category { Id="1", Code="GEN", Text="General"},
new Category { Id="2", Code="POL", Text="Politics"},
new Category { Id="3", Code="FAS", Text="Fashion"},
new Category { Id="4", Code="PEO", Text="People"},
new Category { Id="5", Code="TEC", Text="Technology"},
new Category { Id="6", Code="SPO", Text="Sport"},
new Category { Id="7", Code="LIV", Text="Living"}
Any help is welcomed. Thanks.
Faical SAID Highwave Creations

This occurred to me because I changed my POCO models to inherit from EntityData after I had already created my database without the extra Azure Mobile Service properties (UpdatedAt, CreatedAt, Deleted). The only way I fixed it was to drop the database and
start over with my classes inheriting from EntityData from the beginning. If you can't do that then I would create a new table with EntityData models and see how that database is created and manually update your tables to match those. Here's an image of one
of my tables from the management console on Azure. You can see that CreatedAt is an index.

How to change the width for adf shuttle without modify the skin file

Dear Professionals
I haven an ADF Shuttle component in my jsp screen , How can i change the width for the two boxes without modify the skin files.(I know i can do that by skin but what i want to change one shuttle just in one screen not change all shuttles on other screens).
Regards
Wish79

Okay, I didnt try with the trinidad selectmanyshuttle, but this worked for me on the af:selectmanyshuttle..
        <af:selectManyShuttle label="Label 1" styleClass="mycustcss">
          <af:selectItem label="Label1" value="value1"/>
          <af:selectItem label="Label2" value="value2"/>
        </af:selectManyShuttle>
        <af:selectManyShuttle label="Label 1">
          <af:selectItem label="Label1" value="value1"/>
          <af:selectItem label="Label2" value="value2"/>
        </af:selectManyShuttle>        And in my css file, I have
af|selectManyShuttle.mycustcss::content { width: 800.0px;}
The first selectManyShuttle came up very wide and the second one came up in the default width..
Julian.

Getting the error access denied trying to modify the workbook with identifier in Disocverer Admin

Hi All,
I have exported a workbook created by business user as an .eex file logging in as discoverer admin from a Production enviornment (transactional databse) and trying to import it to a different environment called reporting environment ( non transactional databse) and getting a warning 'WFS GTP REPORT SINAPORE.eex:Access denied trying to modify the workbook with identifier 'WFS_GTP_REPORT_SINGAPORE'.
It says Files Partially Imported so clicked on Finish to complete the import.
The report has been imported under the user account but the sharing to the different responsibilities/Users has not been imported. I need to import the report with the sharing of the responsibilities/users as well.
I do not have an option login into discoverer administratore using the user account, i can only login using the administator account ( i know loging in as the business user it self will allow you to import the sharing). But our DBA's oppse this is a security threat for the users as you are logging in as the user in production environment.
Please help with this issue.

I have the same problem, and I figured out that my windows is installed in french, and every users groups are created in french also, groups like Everyone don't exists and i can't change by console.
Regards, Roberto Borges please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to deal with this problem?

How to deal with this problem?
We plan to use Oracle Coherence (In Memory Data Grid) for a large-scale application. In order to keep the database table data in Coherence caches, we will create all the corresplonding Java objects (entities) and construct the persistence system using JPA/EclipseLink+JDBC. In this way, any in-memory object update will be persisted to the corresponding database tables.
The problem is that some existing application codes are updating these database tables directly now. If the direct-database-table update is not permmited in the persistence environment, we have to discard most of the existing application scripts.
I want to know, in this situation, should I discard most of the existing scripts?
Are there any other solutions?

Allowing writes from both cache & DB is possible with its own set of issues.
The main issue to consider is conflicts from updates on same record via both cache and DB. If your caches are write-through the conflict decreases - but then cache writes become slower. If your caches are write-behind potentially the older cache update will overwrite the latest DB update. Now you are back to Database 101 -- timestamps, versions, etc...
If you use a DB trigger to initiate the resync request you might want to distinguish whether the update has come from the cache-store (in which case, you may choose to do nothing), or if the update was from the 'existing apps', etc...
If you choose to inject the resync logic at the application code level - you have the usual sourcecode issues - can you modify the code, is all the DB code localized, what options do you have to link with Coherence functionality (DLL, external proc, webservice, etc), etc... Naturally though, if you have to make substantial changes to signal a resync....you might consider taking the extra step and change the code to write to the cache.

Non-Standard Buttons in FLVPlayback skin

I posted this before but I don't think I explained it very
well. I'm trying to add a non-standard button to my FLVPlayback
skin, but it's not showing up. Can you add new buttons (with new
functionality) to FLVPlayback skins or can you only edit the
existing ones? This should be similar to adding a logo, does anyone
have a tutorial or anything on adding a logo to an FLVPlayback
skin?

Look
Here Edit the bar at the bottom of the Skin FLA, and add what
you want to that... unlock all layers, select all, then resize, add
a layer and put what you want. Then when selecting a skin for your
FLVPlayback component, select Custom Skin, and target it.

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

Can anyone assist me with this problem

hey guys thanks for reading this hey,
The assignment suggest the use of maps but i am not sure how i can use maps to help me as i am relitivley new to the collections heirahcy. I have attached the code i have so far. i am desperatly in need of help. an explanation of what the program will print is below.
input needs to be grabbed from file
Brazil 1 France 2
France 1 Germany 2
Germany 0 Japan 3
Germany 2 Brazil 0
France 4 Japan 4
Then the corresponding summary written to standard output should be:
Team W D L F A P
Germany 2 0 1 4 4 6
Japan 1 1 0 7 4 4
France 1 1 1 7 7 4
Brazil 0 0 2 1 4 0
For each team, the output contains the number of games won (W), the number of games drawn (D), the number of games lost (L), the total number of goals scored (F, "goals for"), the total number of goals scored by the teams' opponents (A, "goals against"), and the total number of points (P). A team scores 3 points for a win, 1 point for a draw, and 0 points for a loss.
here is the code that i have so far assembled.
import java.io.*;
import java.util.*;
class Soccer
     //declare varibles
     StringTokenizer st;                    // StringTokenizer for separating values
     BufferedReader in;                    // BufferedReader for reading standard input
     BufferedReader infile;               // reads data from input file
     String input;                        // holds input data temporarily
     int count;                              // String input to hold line details
     Map teams = new HashMap();          //creates a new hash map for holding data
     public static final Integer ONE = new Integer(1);     //for distinct wrods count
     String[] temp;
     public static void main (String [] args)
          Soccer app = new Soccer();
               app.input(args);
     }//end main
     public void input(String [] args)
          try{
               //standard output to screen
               in = new BufferedReader(new InputStreamReader(System.in));
               //input from filend class
               infile = new BufferedReader(new FileReader(args[0]));
               input = infile.readLine();
               st = new StringTokenizer(input);
               count = st.countTokens();
               temp = new String[count];
               for(int i = 0; i < count; i++)
                     temp[i] = st.nextToken();
               }//end for
               //start if map code
               Map map = new HashMap(); // Maps words to no. of occs.
               for (int i = 0; i < count; i++) {
                    // Get number of occurrences of next word
                    Integer value = (Integer) map.get(temp);
                    // Increment number of occurrences of word
                    if (value == null) {
                         map.put(temp[i], ONE);
                    } else {
                         int val = value.intValue();
                         map.put(temp[i], new Integer(val+1));
               }//end for
               // Print values of map, one per line
               Iterator it = map.keySet().iterator();
               while (it.hasNext() ) {
               Object key = it.next();
               System.out.println(key + " = " + map.get(key));
               } catch (IOException e){
                    System.out.println("ERROR: " + e.getMessage());
               //call the print method
               print();
     }//end input
     public void print()
          System.out.println("Team     W D L A P ");
     }//end print
}//end class

can anyone assist me with this problem
Write a better subject, go see you lecturer.

How to draw and modify double lines with Adobe Illustrator?

I need tot draw roadmaps. This should be easy using the pen tool, but my problem is that I cannot find a way to draw double lines with this tool. I have seen many fancy border styles and patterns. Some do have double or even quadruple lines, but the problem is than that they have an offset from the vector line and the space in between the two lines (the edges of the road) cannot be filled. Somewere I also found some pens called 'Double line 1.1' to 'Double line 1.6' but they also had an offset from the vector and I could not chance the size of the lines and the interval in between them independently.
What I am looking for is a way to draw two lines in parallel and have the option tot fill the space in between with a color or even a pattern.
The color and size of the lines should be changeable to make a distinction between several types of road.
Is there an existing set of pencils for this purpose? It would be nice to be able to draw not only roads, but also railways and rivers!
I am surely not the first person who needs to do this?
I use AI version 6

Jacob,
Thanks for the answer. I have been searching for a solutions for a long
time, but today I found the solution on a forum (not on this one). That
solution is exactly as you described below, i.e. using a coloured line and a
narrower white line on top of the first one. My problem was that I did not
know how to create a custom brush based on the two lines. Now I know how to
do that. However, I still have the problem. I can now draw double lines and
I can change the color of the background line (the coloured one) but I
cannot change the white colour of the narrower line. I assume that I have to
completely redefine a new brush when I need to change that colour too.
Regards,
Rob Kole
Van: Jacob Bugge [email protected]
Verzonden: donderdag 28 maart 2013 17:04
Aan: RKOLE
Onderwerp: How to draw and modify double lines with Adobe
Illustrator?
Re: How to draw and modify double lines with Adobe Illustrator?
created by Jacob Bugge <http://forums.adobe.com/people/Jacob+Bugge> in
Illustrator - View the full discussion
<http://forums.adobe.com/message/5186535#5186535

Modify Flvplayback skin with counter problem

Similar Messages

Maybe you are looking for