Modify the Overview tab in WebDynpro Based ESS

Hi All,
The Overview tab of the ESS generally displays 8 Area Pages.Our requirement is we should show only two Area Pages.
What is the standard procedure proposed by SAP for achieving this?
To achieve this we have created a custom Area Page group in SAP, assigned Area Pages to this group.
After that we have copied the standard ESS role and Standard Overview Iview.We have modified the property "Application Parameter" of Overview iview.Then we assigned the Overview iview to the Copied ESS role.
Now we are successfully seeing only two Area pages in the Overview of tab of new ESS role.
But when we click the link Employee Search the control is going to the Emloyee Search tab of the Stanard role.
But we want the control to be in the new ESS role.
Any clue in this regard will be helpful.
Regards,
ND.

to achieve the same i copied the "PCD Location" value in the "URL for PCD page" of the area. But it didn't move to the new role..
But unfortunately i made some changes..(exactly i didn't remember). These changes caused the problem.
Now two areas(employee search and benefit&payment) from "standard role" are not appearing in the portal as well as in my copied role. its giving the error stating that Area "EMPLOYEE_SEARCH" not found...
can u please help me

Similar Messages

How to remove the system data details from the overview tab in crmd_order?

Hi All,
How to remove the system data details from the overview tab in crmd_order?

Hi,
It is a standard functionality. Those information will be very useful when you send a message to SAP.
If you still want to remove them, raise an OSS message.
Regards,
Rajesh Kumar

About the Run... button of the Overview tab of portalapp.xml

When I deploy a portal component successfully,
I choose the "Run..." button of the Overview tab of portalapp.xml, it cause a error:
Portal Runtime error:
Access denied (Object(s): com.sap.portal.system/security/sap.com/CustomComponents/
UndefinedSafetyLevel/mySiteMapProject/components/BeanTestCls).
Exception id: 11:01_25/05/08_0013_1699150
See the details for the exception ID in the log file.
I think the problem is that it did't display a logon page automatically to enter uid/pwd.
If I open a IE window to logon to portal firstly, it not cause a runtime error.
What wrong with the setting?
Edited by: Tian Hao on May 25, 2008 5:20 AM

Hi,
You can debug you JSPDynpage either from NWDS with the help of break points or by writing log statements in your code which will be written in defaultTrace log file.
Check this to debug from NWDS:
NetWeaver Portal Debugging
Check this to write log statements:
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/003c41325fa831e10000000a1550b0/frameset.htm
Netweaver Portal Log Configuration & Viewing (Part 3)
Regards,
Praveen Gudapati

Dynamically modify the crystal report field size based on Paper size in C#

Hi,
I need to modify the Crystal Report field size dynamically based on the paper size using C# .Net. According to the paper size, crytal report field width should be increase or decreae.
Kindly suggest any solution on this.
Thanks

Moved to .NET SDK forum
See these RAS samples:
http://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples#NETRASSDKSamples-Exporting%2FPrinting
Don

Is it possible to lock the structure Tab in Solar02 based on the users

Hi,
In Solar02 transaction of solution manager , under configuration node - > structure Tab , it is possible to change the structure . Is it possible to restrict this authorisation based on login users.
Best Regards,
Saravana.

Hi
You can't restrict users as you required
because if they have change access they can very well proceed.
Moreover if you hide it will be hidden for all users from solar_project_admin...project tab
Regards
Prakhar
Edited by: Prakhar Saxena on Sep 24, 2010 12:12 PM

How to hide columns in the output table in webdynpro based on input

Hi Experts,
   I have 2 inputs and 1 input is optional.If both inputs are given proper table output is displayed,but if only 1 input is given a column is empty in the output table so i want to hide this column dynamically at runtime based on my inputs.And i want to hide some empty rows also at runtime based on inputs.
Can anyone help me out to solve this.
Thanks in advance.
Regards,
Anita.

Hi Anitha,
What i understood from your question is,you want to control the table from your inputs.I have a one question for you what do you want to show defaultly i.e when you run the application what you want to show,either no table or table with some values.
Any how i am giving solution in this way.
If both inputs are given proper table output is displayed
Write your below logic in the WDDOMODIFYVIEW )
Here i am assuming that you already have a table element in the view.
Get the values entered in the input fields and compare those 2 values ,if the condition is satisfied then bind the values which you want to show in the table to the context node.
but if only 1 input is given a column is empty in the output table so i want to hide this column dynamically at runtime based on my inputs
You are telling that you know the empty column.If so get the view element reference and use the REMOVE_COLUMN to remove the column.
data:lr_table type ref to cl_wd_table,
       lr_column type ref to L_WD_TABLE_COLUMN.
lr_table ?= view->get_element( 'TABLE1' ).
CALL METHOD LR_TABLE->REMOVE_COLUMN
    EXPORTING
      ID          = 'TABLE1_color'
     INDEX      =
    RECEIVING
      THE_COLUMN = lr_column.
i want to hide some empty rows also at runtime based on inputs.
Removing the rows is very simple.if you know the key fields data of internal table from your input fields then do in this way.
delete itab from wa where key1= "12" and key2="abd".
Now bind the internal table to context node.
LO_ND_hcm->BIND_TABLE(
      NEW_ITEMS            = it_final
      SET_INITIAL_ELEMENTS = ABAP_TRUE ).

How to enable the prebooking tab in ESS

Hi,
In our environment, the prebooking tab is disabled in ESS. Please advise how to enable this tab. Where to do this configuration (e.g. in ESS or R/3)
Regards,
Tony

Hi Tony,
Please refer to the 2 notes below for some information on prebooking in ESS
593044: PV7I/PV8I: Documentation of the prebooking functions
576203: ESS: Activation of the prebooking in the Training
Hope this help
Sarah

Lease-In FI Account Statement Report on RECN Overview Tab

Hello gurus,
I am trying to add a report for Lease In FI account statement (which should contain documents/lines from Accounts Payable). I need to ensure that this report is similar to the Lease Out Tenant Account.
I could see and make the necessary settings on the IMG via Flexible Real Estate Management (RE-FX)->Contracts->Implement Enhancements (BAdi)->Add your Own Reports to Overview path. It is easy to make the settings here to set another option for Lease-In in the Overview drop down box.
However, does anybody know which PBO Module to use i.e. so that it displays the Lease In FI account statements? I can see that the Lease-Out contracts will use the REEX_GUI_LIST_ACCT_SHEET_PBO PBO module, but cannot seem to find the right one for Lease In. Or is there any one at all for Lease In?

Hi,
Pl go through the below documentation, it will give some help.
Modify Overview Lists to Your Requirements
The following describes how you can add to and modify the overview lists that are available on the Overviews tab page in master data processing.
Example: All Rental Objects for a piece of land
Procedure
1. Create a function group in which the list is implemented.
Example: ZREFX_GUI_RENT_OBJ_LIST
2. Create an initialization module in the function group.
This module must have the following interface:
Importing Parameter:
Name Typing
IO_BUS_OBJECT TYPE REF TO IF_RECA_BUS_OBJECT
ID_LISTID TYPE RECAC_WBLIST-LISTID
Exporting Parameter:
Name Typing
ES_SUBSCREEN TYPE RECASCREEN
Example: ZREFX_GUI_RENT_OBJ_LIST_PBO
3. Register the list with the module for the given business object.
Create a new entry for the object type you want (such as IG for land) in the Add Your Own Reports to Overviews IMG activity. Choose a new list ID and enter your module, ZREFX_GUI_RENT_OBJ_LIST_PBO.
Remember that this table is cross-client. The overview can be selected in all clients in the system.
Comments
At runtime, the registered module for the object is called in PBO, and the module is supplied with the business object currently being processed in the application, as well as the list ID. The number of the subscreen, on which the list is implemented, has to be returned.
Using the list ID, you can further distinguish among other different attributes within the module.
Example in the system (existing list):
The measurements of the subordinate objects on the master data are implemented using the module REBD_GUI_LIST_MSSUBOBJ_PBO.
rgds,
Srini

MSS VIEW - Documents in closed status not to be shown in Overview tab

Dear All,
This question is related to SAP HCM performance management system.
In the MSS view, there is a screen where the manager can see the documents of the employees in various status. The view has various status tabs. There is Overview tab where all the documents with all the status are shown. The other tabs are SET GOALS, PROGRESS REVIEW, EVALUATION, EMPLOYEE SIGNS OFF, CLOSURE and REJECTED. So, the documents of the employees in Set Goals status will also be shown in SET GOALS TAB apart from the overview tab. Overview is like the master tab which holds all the documents with all the status.
The requirement is In overview tab, we dont want to see the documents in closed status. They will be only shown in the CLOSURE tab.
Is there a way to achive this. Any customization or any BADI.

Hi,
You might be able to play with the webdynpro settings. Somewhere on the right is the Settings option. Go to the filter tab and say there for status you only want 1 -5 (in preperation to completed). As a normal user you are able to save this and it then only shows the filtered things on the screen.
You might want to try to go in as admin and make this filter avialble for all users. Might work, didnt try this though.
Regards and Groetjes,
Maurice Hagen

Transaction Overview tab in CiC0

Good Day
Please help. If a user opens a transaction in CIC0, and then goes to Document flow and the Overview tab, the system takes a long time to retrieve the data. Does anyone know how we can improve the performance on this? We have applied the performance improvement notes for CIC0, but this happens when an activity partner has many transactions linked to it.
Your assistance is appreciated.
Thanks & Regards
Shahkera

Hi,
The "Move" button is given, if ur BP is at address1 and suppose after 1year he is planning to move to address2. Then CRM system gives you flexibility to maintain this new address with new validity period.
After 1 year system will automatically change the BP address1 to address2 as per the validity.
Let me know if you need further details on this.
Reward pnts if helps.
Cheers,
Raj

Unable to find the Overview View in the DC pcui_gp~xssutils of ESS

Hi All,
In ESS application one work set is there with name Overview.When we click on the Overview workset then the page contain 5 links.When i am clicking on Who's who link i am getting error message Page cannot be found.Where as if we will direct click on workset Who's Who then we are able to see the page.
I have imported the ESS track to NWDS.The i have synced the DC,then i have done Create project .Now i am able to see the DC xssutils in webdynpro explorer.I have expanded the Dc and check all the View present inside DC.However i am unable to find the View similar to Overview page.In Content Administration Overview iView is mentioned as WebDynpro iView.
Can anybody tell me how i will get the Overview pafe in the DC?
Is ESS standard package is not deployed to Track properly thats why i am not getting the all view inside the DC?
Thanks
Susmita

The problem is solved by basis team.

ESS:WebDynpro Based Personal Information iviews.?

Hi All,
I am configuring ESS Personal Information. Using Ecc 5.0 , mySAP ERP 2004 60.2 ESS BP and EP6.0. Has anybody configured WebDynpro based Personal Information for country specific India version( country code:40)..Am able to get ITS based Personal Information,but clients are asking for WebDynpro based iviews
Any inputs on this will be a great help..
Thanks & Regards,
Mahesh.M.R

Hi Girish,
We are using EP 6.0 and we have downloaded standard Business Packages of mySAP ERP 2004 60.2. SAP had told that webDynpro based iviews were not present earlier and now they have released the patch for Personal Info for india country version..
The patch has been applied by the basis person.
The error what we get is:
<i> com.sap.dictionary.runtime.DdException: Type com.sap.xss.hr.per.in.family.model.types.Hcmt_Bsp_Pa_In_R0021 does not exist</i>
We dont have Netweaver Developer Studio and dont know WebDynpro.
So how can i proceed further..
Regards,
Mahesh.M.R

Hiding certain areas from the overview page of ESS in portal

HI All,
We have a requirement where we need to hide/disable certain areas from the "Overview" page of ESS in portal.
In Overview page, we have certain links like Employee search,Life and work events,
Purchasing and travel and expenses.
I m not able to find these pages under overview workset also.
We have to hide 'Purchasing' and 'life and work events' areas from the overview page as the customer dosent want to use this sap standard impl.
Is the customiztion to be done from portal side or do we need to do it from the IMG??
Can someone pls tell us in detail how to do it?

It sounds like first you need to understand the Overview page and how it gets built. This all comes from the Homepage Framework configuration in the BACKEND (ECC box). Look in the IMG under "Cross Application Components" (or in the ESS section as will which actually has the same section) to find the configuration area. The Homepage Framework configuration however is also tightly coupled to the portal content (ie. objects in a portal role PCD path are tied to configuration "resources" in the Homepage Framework configuration). I won't get into all that, as there is plenty of material in these forums and documentation (help.sap.com) that describes the details of how all of this works. However, to answer your immediate question....
Ok....so the "lazy man's approach" is fairly simple....in the IMG where you assign the Areas to the Area Group, you can simply change the display order number of the ones you want hidden to 0 (zero)....this will at least keep your standard entries in place....or you can just delete them from the assignment to the Area Group in the "change" step.
Sooooo....that gets them off the Overview (Area Group) page. However, they will still be in the standard delivered portal role (for example, the worksets will still show up in the second line of the top level navigation). So you need to remove the worksets from there.
Now, I call the above the "lazy man's approach" because in actuality, you should build your own custom Homepage Framework to your needs. This way it is safer, customized and you are not touching the standard, delivered entries so you can use them as reference later. Also, you should be doing the same on the portal side....ie. build you own custom role based on delta-linked copies of the standard objects (worksets, pages, and iViews). This might seem like a lot of work, but it is way more flexible....for example, if you need several different ESS "versions" to accomodate different types of users.

Remove the cancelled document from Event history overview tab in vehicle

Hi Experts,
when a activity is created for a vehicle it is found in the event history overview tab of vehicle. In my project we want to show only the open and completed documents. we want to hide the cancelled documents.
Need solution through configuration.
With Regards,
Selvam T

hello sir,
i want to your help
i was installed fresh windows 7 via cd rom and then after installed all software.
and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
[text removed for privacy]
VIMAL

Customize the standard form is WebDynpro ESS (ess~lea)

Hi,
I want to customize the standard form is WebDynpro ESS (ess~lea) Leave Request for Infotype2001 subtype 9990 in NW04. What are the steps and best practices?
Regards
Ali

Hi
Please see SPRO->Personnel Management->Employee Self-Service->Service-Specific Settings->Working Time->Layout of Web Application->Define Field Selection.
Regards
kk.

Modify the Overview tab in WebDynpro Based ESS

Similar Messages

Maybe you are looking for