Modify the way 'undo' works

Start a fresh database, import 3 images and go the the Develop module. Move the Temperature slider of the first image far to the right, the Temperature slider of the second image far to the left and the Exposure slider of the third image far to the right. Now select the second image and press CMD/CTRL-z to 'undo'. What happens is, I believe, a bug: The Exposure of the *third* image is returned to its original position but the second image is the one being displayed.

I tend to ignore Undo other than for undoing *immediate* actions, simply because I can't be sure of what will happen.
In other words, if I am dragging sliders around on a specific image and realize I don't like the results, I'll use Ctrl+Z to get back to where I was quickly. But if I'm looking at an image I edited even a day ago and I want to revert past actions, I'll ALWAYS use the history so that I can see exactly what I'm doing. If I were to use Ctrl+Z, there is always the chance that I will get confused on my past sequence of events and end up undoing an edit that I didn't want to undo, without seeing its effect.
Given this, I'd actually prefer it if Ctrl+Z only undid actions to the current selected image(s) SINCE SWITCHING TO THOSE IMAGES. This would prevent it from ever undoing actions to other images without my being aware of it. Basically, it would be a built-in safety valve, forcibly requiring me to use the more deliberative History approach when I want to undo changes to other images.
But this is just the way I tend to work. I'm not sure anyone would agree with me, or that this would ever be a sensible default behaviour, though.
As a more general approach (although it's not my preferred implementation), I think Undo should only work in cases where the user can see its effect. This means only undoing the current or selected set of images. Undoing "other" images means that its effect may be invisible, and I don't think that's desirable.

Similar Messages

UNSUPPORTED : The way it works Apache with OC4J via AJPV13 with mod_jk

RDBMS Version: 8.1.7.x
Operating System and Version: SUSE Linux 7.2 / Win NT/2k/XP
Product (i.e., OAS, IAS, etc): 9ias 1.0.2.2 OC4J 9.0.2.0.0
Product Version:
JDK Version: 1.3.1
Error number:
UNSUPPORTED : The way it works Apache with OC4J via AJPV13 with mod_jk
We dont want to use the lame and old mod_jserv so we want to use oc4j but in connection with Apache.
This is like mod_oc4j in the Oracle 9ias Release 2
This guide is for advanced users !
Step-by-Step :
1) get Tomcat 3.3 for linux or nt with Apache module mod_jk
http://jakarta.apache.org/builds/jakarta-tomcat/release/v3.3/bin/
2) add mod_jk module to httpd.conf (9ias) and comment all mod_jserv, dms, oproc, ojsp ....
LoadModule jk_module libexec/mod_jk.so
Include mod_jk.conf
3) edit mod_jk.conf
JkMount /*.jsp ajp13
JkMount /servlet/* ajp13 JkMount /servlets/* ajp13
<Location "/WEB-INF/"> AllowOverride None
deny from all
</Location>
3) edit workers.properties
workers.tomcat_home=/opt/oracle/ias/oc4j/j2ee/home
workers.java_home=/usr/java
worker.list=ajp13
worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp13.type=ajp13
4) edit http-web-site.xml (oc4j)
<web-site host="localhost" port="8009" protocol="ajp13" display-name="Oracle9iAS Containers for J2EE HTTP Web Site">
5) start oc4j
java -verbose -jar oc4j.jar
6) start apache (look in error_log)
apachectl startssl
7) try to request a jsp page or servlet ..
http://localhost:7777/test.jsp
8) good luck it works fine .. !!
Matthias Roth
Technical Manager
Z|rich Investmentgesellschaft mbH
[email protected]

Thanks for the tip Mathias, it's always good to see people trying out experimental things with the products.
We're providing a new module (mod_oc4j) with our Oracle9iAS Release2 product to do this directly from the Oracle HTTP Server (Apache). We've re-written bits and pieces of the module to improve it's performance. Likewise, we've also integrated mod_oc4j with our HA story so it will be notified when new OC4J instances are brought online or if existing ones go down, enabling it to actively route requests around the available OC4J instances.
Thanks again!
-steve0

Sirius - works on the way to work - doesn't work on the way home

Looking for some help from this forum because I am getting no where with the folks at Sirius. For the last 2 months I have not been able to get a signal on my ride home from work downtown Cincinnati to just north of the city. I have no problem with Sirius on the way into work but on the way home it doesn't want to work - I have called Sirius numerous times and they have gone through all the different options - unplugging, new antenna, etc. -and it still does want to work - does anyone have any suggestions of how to get this fixed?

Right now - the only thing I can think of is "get more data" - Can you reproduce the problem at the same time of day on weekends? If so, what happens if you drive your morning route in the evening on a weekend? (To determine if the cause is vehicle orientation/route or time of day).
And the constellation shouldn't change over a 2 month period - the Sirius orbits are chosen so that they appear in the same exact spot in the sky every day at a given time of day. HOWEVER, a technical failure on one of the sats could have caused them to tweak the orbits, or there could be something about one of the sats your radio no longer likes.
Have you tried sending a refresh signal to the radio? (I assume Sirius has refresh signals like XM does.)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

I added Panorama Group Tabs and I don't like the way it works. I want to remove it but can't find or figure out a way to. Can you please tell me how it can be removed permanently? Thanks!

I added Panorama Group Tabs and I don't like the way it works. I want to remove it but can't find or figure out a way to. Can you please tell me how it can be removed permanently? Thanks!

That link doesn't tell you how to remove the Panoroma Tab Groups!! My main issue with it is that along my tabs at the top I no longer have the tab to open a new tab. Instead I have to click on the tab groups and then open them and click on an open area in the tab to get a new tab opened!! Is there a way to add that? I don't see that when I go to customize the tool bar as there's no icon to add it, just one to open a new window, which I don't want to do!! Thanks!!

Opening CS4 fIles on a second monitor, the way it worked in CS3.

This drove me nuts for well over a year. I guess this is a "tip" of sorts for dual monitor users who recently switched from CS3 to CS4 and expect files to open on the 2nd monitor.
With the advent of CS4, the ability to automatically open a few dozen files across my 2nd monitor became impossible unless the Application Frame was set to cover the 2nd monitor with its opaque grey background. What I missed was the ability to have a totally unencumbered view of the 2nd monitor's desktop..the way it worked in CS3 and earlier….and most importantly: to have anything I opened, appear on the 2nd monitor.
Without the Application Frame active and positioned to cover my 2nd monitor, loading files would always appear under the Palettes on my 1st (smaller) monitor. (It's the way I work. 30" 2nd monitor on my left and main 24" in front of the keyboard).
A couple of days ago, I accidentally clicked the yellow "Hide" button in the corner of the Application Frame. As expected, it hid the Application Frame into the Dock and left the window free.
Here's the unexpected thing: Loading a file (or multiple files) continue to tile diagonally down the 2nd monitor, the way they do when the Application Frame was visible.
It's almost perfect…the tiling spacing is still larger than it was in CS3 and the tiling starts where the bottom of the Application Frame's menu bar was positioned before it was hidden. But it's as close to CS3 dual monitor behavior workaround as I've found.
It'd sure be nice if Adobe implemented a "Hide Application Frame" View Menu item in CS5.

The screen dimensions are "right," but I don't want it to use up any more space on-screen than is in the window.

Today on the way to work it was raining heavily when i got to work my coat and pocket was soaked with my i phone 5 in it i took it out and wiped the screen off when i got to work and put it in my bag the likfe was on like 50% when i go on my break like 4

today on the way to work it was raining heavily when i got to work my coat and pocket was soaked with my i phone 5 in it i took it out and wiped the screen off when i got to work and put it in my bag the likfe was on like 50% when i go on my break like 4 hours later my phone is dead and would not turn on for a while when it did it had some writting in the top left corner ive tried resseting my phone on i tunes and nothing has helped and the phone is relatively brand new so i need HELP?

Hi Tone96,
Based on your description, it sounds like you may need to have your iPhone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

TP4 / AF:REGION / What is the way to work with af:region and Backing Beans?

Hello,
I would be able to use the "af:region" component with a Backing Bean, but all examples I can found googling are with pageDef.
So, I have been trying with different classes the way to solve this problem and I arrive to this:
oracle.adf.controller.internal.binding.TaskFlowRegionModel
Some code:
task-flow-definition.xml
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="taskDestinationA">
    <default-activity>destinationA</default-activity>
    <view id="destinationA">
      <page>/regionDestinationA.jsff</page>
    </view>
    <use-page-fragments/>
</task-flow-definition>
</adfc-config>
adfc-config.xml
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<managed-bean>
    <managed-bean-name>backing_regionTest</managed-bean-name>
    <managed-bean-class>backing.RegionTest</managed-bean-class>
    <managed-bean-scope>request</managed-bean-scope>
    
</managed-bean>
</adfc-config>
regionTest.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"/>
<f:view>
<af:document binding="#{backing_regionTest.document1}" id="document1">
<af:form binding="#{backing_regionTest.form1}" id="form1">
    <af:region binding="#{backing_regionTest.region1}" id="region1"
               value="#{backing_regionTest.regionModel}"/>
</af:form>
</af:document>
</f:view>

</jsp:root>
RegionTest.java
import oracle.adf.controller.internal.binding.DCTaskFlowBinding;
import oracle.adf.controller.internal.binding.TaskFlowRegionModel;
import oracle.adf.view.rich.component.rich.RichDocument;
import oracle.adf.view.rich.component.rich.RichForm;
import oracle.adf.view.rich.component.rich.fragment.RichRegion;
import oracle.adf.view.rich.model.RegionModel;
public class RegionTest {
    private RichForm form1;
    private RichDocument document1;
    private RichRegion region1;
    private RegionModel regionModel;
    public RegionTest () {
        /*Here I try to put the same values as the constructor of TaskFlowId*/
        /*THERE IS NO DOCUMENTATION ANYWHERE :P*/
        DCTaskFlowBinding dctfb = TaskFlowRegionModel.getCurrentTaskFlowBinding("/WEB-INF/task-flow-definition.xml","taskDestinationA");
        //And here, dctfb is always NULL.
        /*I try removing the '.xml' extension of the name, but still not works*/
        //Fill the value of regionModel
        this.regionModel = new TaskFlowRegionModel(dctfb);
        /*Perhaps is better create a method to acquire the value,
          but I try in constructor first*/
    public void setForm1(RichForm form1) { this.form1 = form1; }
    public RichForm getForm1() { return form1; }
    public void setDocument1(RichDocument document1) { this.document1 = document1; }
    public RichDocument getDocument1() { return document1; }
    public void setRegion1(RichRegion region1) { this.region1 = region1; }
    public RichRegion getRegion1() { return region1; }
    public void setRegionModel(RegionModel regionModel) { this.regionModel = regionModel; }
    public RegionModel getRegionModel() { return regionModel; }
regionDestinationA.jsff
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:outputText value="Hello World!"/>
</jsp:root>So, my problem is in Backing Bean class (RegionTest.java). I don't know how I can acquire 'DCTaskFlowBinding' instance value; well, I don't know if that is the way to acquire the value of TaskFlowRegionModel, and even I don't know if this is the way to set the value of RegionModel. I don't know all of this because there isn't documentation yet :P
Some oracle-java-guru can help me, please?
JVN
PD: Environment: JDev TP4.

Hi,
your biggest problem is the use of internal classes that probably will change without further notice and lead to a broken application then
I don't think that the region model is supposed to work without ADF binding in this release. If you need a page region then the Trinidad region should be helpful (though it doesn't support you with navigation cases as the taskflow does)
I'l check internally if there is an option to do what you are trying to do. However, as mentioned, if you need to use internal classes then the answer probably is no.
Frank

IMac Fan Revved Up All the Way - NOTHING Worked!

Hi,
I've had a mid-2011 27" iMac (Intel) for about a year, and I am now facing the problem of having my CPU fan constantly revved up all the way (~4000RPM). I get this even when my CPU is 97% idle and the temperatures across the board (according to iStat) are perfectly normal.
Now, I've tried every possible solution I came across, and nothing worked. Among what I tried:
Resetting the SMC
Resetting the PRAM
Sleeping, restarting, shutting down, etc.
Re-installing Mountain Lion
Removing all sorts of applications and killing all sorts of processes
Using every imaginable fan control software (and I do mean /every/)
Formatting the hard drive and doing a clean install of Lion
Formatting the drive again and doing a clean install of Mountain Lion
For some reason, despite all the above "solutions" the fan still insists on revving up to above 3500RPM (usually the first few minutes or hours of running the machine after each of the solutions above works, but then the fan revvs up again for no apparent reason). In fact, the minimum CPU fan speed remains stuck at 3500 (even when I manual set it to, say, 1200, regardless of which fan control software I use).
So, do I have a hardware problem? Is it a problem with my temperature sensors? Do I need to get something replaced? My problem is that I'm currently living abroad, in a country with no Apple Store in sight, and hence no access to an Apple Genius. I really hate the idea of manually opening up my iMac and messing around with it. But is that the only option I have? Should I try to disable the fan, for example? If so, how? Check for loose wiring? What?
One final note that could be helpful: I noticed from the first or second week of using my iMac that its power supply makes a very faint buzzing sound when the machine is off (you have to place your ear next to it to hear it). Could this be a power supply issue, which hosed the temperature sensors over time?
Please help me with whatever suggestions you may have. Thank you.

I even tried booting off the Lion and Mountain Lion DVDs and can't find the AHT there either.
Since there aren't any Lion or ML DVDs provided by Apple, that's a strange comment. For the AHT failure, assuming that the machine came originally w/Snow Leopard, try this.
Mount disc 2, run this command in the Terminal app, OPTION-click & hold Finder's Dock icon, and select RELAUNCH:
defaults write com.apple.finder AppleShowAllFiles 1
That unhides all hidden files/folders.
Now, drill down to /"Applications Install Disc"/System/Library/CoreServices/ and drag the .diagnostics folder into your Lion or ML boot volume's /System/Library/CoreServices/ folder.
Run this command to hide the normally hidden files/folders and RELAUNCH the Finder again.
defaults write com.apple.finder AppleShowAllFiles 0
This should allow the machine to boot into AHT when restarting and holding down the D key.

Advice needed: The way to solve out of memory problem (or the way to work with big csv files)

Hello:)
I'm in trouble: I have a big csv file (over 5gb of web-analytics data) and my 64 bit excel (and 6gb ram)
I cant load file to data model because of it's size. There is an error "out of memory" in power query.
This is the first time when I encountered such a problem.
What options do I have to work with such a file? To increase memory in my computer? Would it solve the problem? How much do I need to work with 6gb csv?
Or may be I can upload my data somewhere to azure and work with it there?
So the problem - is there any way to deal with big files using power query? Or I need to become a developer and learn sql or other languages?
Thanks in advance.
Max

Hi Miguel!
Thanks for your answer.
I've tried to load this file on virtual pc from azure cloud with this config:
I have increased memory limit in power query settings:
And still, the proble is the same:
What I do wrong?

Problem in modifying the code using work area concept

Hi,
I am working on a code in which i am on the code in which i am using the modify statement but it is not giving the right output.
here's d code:-
LOOP AT T_ITPO5 INTO W_ITPO5.
        LOOP AT T_ITPO4 INTO W_ITPO4 WHERE AUFNR = W_ITPO5-AUFNR.
       LOOP AT T_ITPO4 INTO W_ITPO4 FROM WV_INDEX.
         IF W_ITPO4-AUFNR EQ W_ITPO5-AUFNR.
         IF ITPO4-NTGEW <> 0 .
            CALL FUNCTION 'ZGET_ITEM_WEIGHT'
              EXPORTING
                P_BUID   = W_ITPO4-WERKS
                P_ITEMID = W_ITPO4-MATNR
                P_QTY    = 1
                P_UOM    = W_ITPO4-MEINS
                P_UOM1   = 'KG'
              IMPORTING
                P_RETVAL = W_ITPO4-WTKG.
            TOTWT1 = W_ITPO4-WTKG * W_ITPO4-MENGE.
         IF W_ITPO4-BWART = '261'.
          W_ITPO5-I_QTY = W_ITPO5-I_QTY + TOTWT1.
         ELSEIF W_ITPO4-BWART = '101' OR W_ITPO4-BWART = '531'.
          W_ITPO5-I_QTY = W_ITPO5-I_QTY - TOTWT1.
         ENDIF.
       ENDLOOP.
         MODIFY T_ITPO5 INDEX SY-TABIX FROM W_ITPO5.
       MODIFY T_ITPO5 FROM W_ITPO5 TRANSPORTING AUFNR.
   ENDLOOP.
     WRITE: / 'PRD.NO       ITEM DESCRIPTION                               WIP(KGS)'.
    ULINE.
    LOOP AT T_ITPO5 INTO W_ITPO5.
      READ TABLE T_ITPO1 INTO W_ITPO1 WITH KEY AUFNR = W_ITPO5-AUFNR.
      SELECT SINGLE MAKTG FROM MAKT INTO W_ITPO5-ITEMDESC WHERE MATNR = W_ITPO1-MATNR.
      if sy-subrc = 0 .
      WRITE: / W_ITPO5-AUFNR,W_ITPO5-ITEMDESC,W_ITPO5-I_QTY.
      TOT_QTY = TOT_QTY + W_ITPO5-I_QTY.
      else.
      write 'Unsuccessful'.
      endif.
    ENDLOOP.
    ULINE.
    FORMAT COLOR 3.
    WRITE: / 'GTOTAL',55 TOT_QTY.
    FORMAT COLOR OFF.
plzz provide me guidelines to solve this problem.

here's d code;-
TYPES: BEGIN OF ITPO1,
       AUFNR TYPE AFPO-AUFNR,      "Order Number
       PSMNG TYPE AFPO-PSMNG,      "Order item quantity
       WEMNG TYPE AFPO-WEMNG,      "Quantity of goods received for the order item
       DWERK TYPE AFPO-DWERK,      "Plant
       MATNR LIKE AFPO-MATNR,      "Item Id
       END OF ITPO1.
DECLARATION FOR AUFM TABLE
TYPES: BEGIN OF ITPO4,
       AUFNR TYPE AUFM-AUFNR,      "Order Number
       BWART TYPE AUFM-BWART,      "Movement Type (Inventory Management)
       MENGE TYPE AUFM-MENGE,      "Quantity
       MEINS TYPE AUFM-MEINS,      "Base Unit of Measure
       BLDAT TYPE AUFM-BLDAT,      "Document Date in Document
       WERKS TYPE AUFM-WERKS,      "Plant
       MATNR TYPE AUFM-MATNR,      "Material Number
       NTGEW TYPE MARA-NTGEW,      "Net Weight
       WTKG TYPE MARA-NTGEW,
       END OF ITPO4,
       BEGIN OF ITPO5 ,
       AUFNR TYPE AUFM-AUFNR,
       MENGE TYPE AUFM-MENGE,
       I_QTY TYPE AUFM-MENGE,
       ITEMDESC LIKE MAKT-MAKTG,
       END OF ITPO5.
    WORK AREA AND INTERNAL TABLE DECLARATION
DATA : W_ITPO1 TYPE ITPO1,
       W_ITPO4 TYPE ITPO4,
       W_ITPO5 TYPE ITPO5,
       T_ITPO1 TYPE ITPO1 OCCURS 0,
       T_ITPO4 TYPE ITPO4 OCCURS 0,
       T_ITPO5 TYPE ITPO5 OCCURS 0.
VARIABLES
DATA: TOTWT1 LIKE AUFM-MENGE,
      TOT_QTY LIKE AUFM-MENGE.
PARAMETERS N SELECT-OPTIONS
PARAMETERS: PLANT LIKE AFPO-DWERK.
SELECT-OPTIONS: PO_DATE FOR AFKO-GSTRP.
    LOOP AT T_ITPO5 INTO W_ITPO5.
        LOOP AT T_ITPO4 INTO W_ITPO4 WHERE AUFNR = W_ITPO5-AUFNR.
            CALL FUNCTION 'ZGET_ITEM_WEIGHT'
              EXPORTING
                P_BUID   = W_ITPO4-WERKS
                P_ITEMID = W_ITPO4-MATNR
                P_QTY    = 1
                P_UOM    = W_ITPO4-MEINS
                P_UOM1   = 'KG'
              IMPORTING
                P_RETVAL = W_ITPO4-WTKG.
            TOTWT1 = W_ITPO4-WTKG * W_ITPO4-MENGE.
         IF W_ITPO4-BWART = '261'.
          W_ITPO5-I_QTY = W_ITPO5-I_QTY + TOTWT1.
         ELSEIF W_ITPO4-BWART = '101' OR W_ITPO4-BWART = '531'.
          W_ITPO5-I_QTY = W_ITPO5-I_QTY - TOTWT1.
         ENDIF.
       ENDLOOP.
         MODIFY T_ITPO5 INDEX SY-TABIX FROM W_ITPO5.
       MODIFY T_ITPO5 FROM W_ITPO5 TRANSPORTING AUFNR.
   ENDLOOP.
     WRITE: / 'PRD.NO       ITEM DESCRIPTION                               WIP(KGS)'.
    ULINE.
    LOOP AT T_ITPO5 INTO W_ITPO5.
      READ TABLE T_ITPO1 INTO W_ITPO1 WITH KEY AUFNR = W_ITPO5-AUFNR.
      SELECT SINGLE MAKTG FROM MAKT INTO W_ITPO5-ITEMDESC WHERE MATNR = W_ITPO1-MATNR.
      if sy-subrc = 0 .
      WRITE: / W_ITPO5-AUFNR,W_ITPO5-ITEMDESC,W_ITPO5-I_QTY.
      TOT_QTY = TOT_QTY + W_ITPO5-I_QTY.
      else.
      write 'Unsuccessful'.
      endif.
    ENDLOOP.
    ULINE.
    FORMAT COLOR 3.
    WRITE: / 'GTOTAL',55 TOT_QTY.
    FORMAT COLOR OFF.
I want to have output that the production order is displayed along with the deficit quantity. but using this concept it shows only production order no. and qty 0.

Firefox 8 changed how "open all in tabs" works for bookmarks. How do I get it back to the way it worked in FF7?

In fFF7, right clicking a bookmarks folder displayed a menu with "Open all in tabs" as the first item. Selecting this option closed all other tabs, then opened the group in new tabs. This changed in FF8--now the group is opened in tabs adjacent to the already opened tabs. How do I get it to act like it did in FF7 (and before) where the open tabs where closed before opening the new folder?
Thanks

So your advice for a feature that worked fine, was intuitive, and we want, but was removed from Firefox, is to add an extension? That's not helpful.

I don't like the way Stacks work. Anyone else?

If I click and hold on a stack in the dock, the preference menu pops up. To get the stacks to open, I have to click and release -- the stack pops open -- and then click and release on the selection I want. The click-release, click-release is very windows-like. I prefer the 10.4 (and every other Mac OS menu method) of click, then hold the mouse button down, move to the selection and then release the button to choose the item.
I've sent feedback to Apple, but after downloading 10.5.2, I see it's still the same.

Yes -- I've installed 10.5.2. The 'clicking' behavior is still not the same as 10.4. My only beef is that the new way involves more clicking instead of click down, hold and then release on the selection.
I manage some PCs for a client using Windows and it seems that I click the mouse at least double the times I do on a Mac.
It's also possible that I'm not explaining myself clearly.

I do not understand what ABS is nor the way it works

So that is the question. Any help is welcome for I am completely clueless.

Did you read http://www.archlinux.org/docs/en/guide/ … .html#SEC5 ?
Some more simple points :
- ABS is completely optional. You can run Arch w/o ABS.
- ABS is what the arch developers use to create and maintain the distribution.
- ABS is for you if you want to change how some packages are compiled.
- ABS is for you if you want to add software "the Arch way", i.e. put it under pacman's control instead of the "./configure && make install" routine which would put "stray files" into /usr/local

On the way to work this morning my iPhone just deleted all my contacts.

I was using it the next this i know all my numbers had been deleted and my favourite contacts page just has the number as do all my texts.
What's happened? Why has this happened?
I can't just back it up because it's an old phone im using until i can afford to get my iphone4 fixed as the thing just stopped working one day aswell and wanted restoring which would be great had it been backed up in 6 months, which it had not...This was due to my main computer being in storage from a house move.
Quite fed up of 'just restore it' they shouldnt really just fail sporadically and frequently in the first place...
Thank you if anyone knows anyway of bringing them back or explaining that would be great.

All contacts on your iPhone should be available in an address book app on your computer - an address book app that is supported for syncing contacts with your iPhone. Not a good idea to depend on an iPhone or any cell phone alone for your contscts, which can be lost or stolen or have a software problem with all contacts randomly being deleted. First I've heard of this.

How to modify the homepage frame work

Hi,
As i need to do the ESS homepage customization , i need to change the Overview text and Icons, for this am giving my custom tet in SPRO->Cross Apss->homepage framework->headers and area group pages->define area group pages->overview..its giving an warning message and text not saved
Do not make any changes (SAP entry)
Message no. SV117
Please suggest me how can i resolve this.
Regards
Rajesh

Rajesh,
You are trying to make changes to standard entries so you are getting that warning but still you can make changes.problem with this approach is whenever system is upgraded these changes will be overwritten.so it's better to create custom entries .
Thanks
Bala Duvvuri

Modify the way 'undo' works

Similar Messages

Maybe you are looking for