Modifying a bitstream from a file

Hi,
I'm trying to write an app for creating a 3D pic. I have all the theory sorted and now I require a means of creating a mirror image of a jpg. To do this involves moving the pixels on the right of the screen to the left and vice versa for each horizontal line. I have a BitStream setup to stream each byte out of the jpg for each line into an array and swap the bytes from the front to the back but the resultant file is corrupted. Has anyone got any other way of doing this?

Are you simply reversing the bytes of the file and writing it back out? That won't work.
If not, post some code with what you're trying to do.

Similar Messages

Modifying a read from text file

I understand that in order to read from a text file and display the resulting array in a control, you need to use the property nodes. I've set up the VI to do exactly that.
Now, however, I want to be able to modify the resulting control so that the indicator changes as well. As far as I can tell, the attached VI does this with some small complications. Because of the way the case structure is set up, the timing of the change to the control must be exactly right so that the value will be caught on the right side of the loop (I've put the VI in "Run Continuously" mode).
Is there a better way I can accomplish a similar task and will transition the changes easier?
I've attached the VI as well as a sample text file filled with arbitrary numbers.
Solved!
Go to Solution.
Attachments:
Test.vi ‏11 KB
test.txt ‏1 KB

Who says you have to use a property node? Use a local variable. It is a lot more efficient and does the same job.
Now for your indicator...USE DATA FLOW. Wire directly to your indicator from where you are updating your control.
Other edits: Only write to the control inside of the case structure. This will make things simpler.
The False case is empty.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Test_BD.png ‏17 KB

How to delete a perticular node from xml file using java code

Hii All,
Now i am trying to delete a perticular node from xml file.Like...
XML file:
<Licence>
<SERVER>
<was id="1">1</was>
<was id="2">2</was>
</SERVER>
</LICENCE>
I am working in messaging service using JABBER framework with whiteboard facility.
Here Some commands i have created to add,modify,delete nodes from xml file.They Are
1.If u want to add a new node then.
create Licence.SERVER <ss id="3">ddd</ss> lic.xml
(here u want to add a new node called "ss" under Licence.SERVER.
And lic.xml is tyhe xml file name where it was saved.
2.If u want to delete a node(Suppose <was id="1">),then the command should be
delete Licence.SERVER.was:id='"1" lic.xml
A problem arises that here it find two was attributes.And it delete the last was attribute,not the requested node.
PLEASE HELP ME IN SOLVING THIS CODE..
------------------------------------

Looks like you clicked on "Post" before you pasted in the code you were talking about.

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

How to open saved files using 'read from text file' function

Hi everyone, I am having a hard time trying to solve the this particular problem ( probably because I am a newb to lanbview ). Anyway , I am able to save the acquired waveforms by using the 'Write to text file' icon. I did manually modify the block diagram of the 'Write to text file' icon and create the correct number of connector so as to make my program work. But now I have no idea on how to modify the block diagram of the 'Read from text file' block diagram to make my program 'open' my saved waveforms. Or i do not have to modify anything from the block diagram of the 'Read from text file'? Can anyone teach/help me connect up? Do i need the build array on the "open" page?
Here are some screenshots on part of my program
let me know if you guys would need more information / screenshots thank you!
Attachments:
ss_save.jpg ‏94 KB
ss_open.jpg ‏94 KB
modified_writetotextfile.jpg ‏99 KB

Ohmy, thanks altenbach. oh yeah i forgot about those sub VIs. will upload them now. Was rather demoralized after reading the comments and really struck me on how weak i'm at on labview really hope to get this done. But of course i have to study through and see how it works. Actually i am going to replace those 'signal generators sub vi' with ThoughtTechonology's sample code so i can obtain data waveforms real-time using Electrocardiography (ECG) ,Electromyography (EMG ) and Electroencephalography (EEG) hopefully i can find out how to connect the sample code.
( ps . cant connect it now unless my program is working otherwise labview will crash )
( p.s.s the encoder of my biofeedback trainer already acts as an DAQ so i wont need to place an DAQ assistant in my block diagram i suppose )
The sample code of ThoughtTechnology is named as attachment.ashx.vi. too bad i cant use it and present it as my project
Attachments:
frequency detactor.vi ‏53 KB
signal generator.vi ‏13 KB
attachment.ashx.vi ‏40 KB

How to create ICon/Cursor from pdf files

     I was able to create ICon from jpg file without problem but I couldn't create ICon from pdf files.
Here my code:
var myDoc = app.newDoc();
myDoc.importIcon("myIcon"); // it worked when I chose a jpeg image, but it didn't
//when chose a pdf file.
icon = myDoc.getIcon("myIcon");
oIcon = util.iconStreamFromIcon(icon);
myDoc.closeDoc(true);
app.addToolButton({
               cName: "myButtoon",
               oIcon: oIcon,
               cExec: "app.alert('Someone pressed me!')",
               cTooltext: "Push Me!",
               cEnable: true,
               nPos: 4
   //app.removeToolButton("myButtoon");
My goal is to create buttons which have icons from a pdf file (stamp) and when user click on these buttons, the cursors become the icon . And then, when user click on the document, the iCon will be showed in the document. The point is: is there anyway to create icons/cursors/stamps from one pdf file. Because the stamp is changeable, when user changes the color/shape of the pdf file, the icons/cursors/stamps will automatically change
What kind of pdf format do I have to use?
I used the sample "SignHere.pdf" in stamps folder of Acrobat but it didn't work.
Thanks.

The SDK has all the information - but certainly there are only samples for those common actions that users have been doing for years. Most developers don't recreate stuff already present in the application - such as the Stamp plugin - so we don't have samples of such things.
But all the pieces you need are present in the SDK - it's just necessary obvious. You will need to learn about the details of how the plugin APIs work to create the toolbars and toolbuttons, and then how to handle cursors. You will then need to learn about PDF details in order to be able to take an existing PDF, potentially modify it (eg. Change the color(s)) and then place it onto another PDF.
The methods you listed are from JavaScript - there are alternative methods for plugins, such as the AVConversion APIs.

How to import data into a Z table from excel file?

hi,
i have a custom created Z table into which i want to import some data from an excel file. which function can i use to do so because SE16 allows me to insert data only one by one via a data entry screen. this is time consuming. i want to import data from excel file so that its faster.

HI,
this program uploads data from excel and modifies ztable,(inserts records into ztable), check this and modify according to ur requirement)
This program uploads material number from excel sheet and does
******modifications to material number if required by the user
******and updates the table zmatnr with new material against the old material number
REPORT zmat_no message-id zebg.
TYPE-POOLS truxs.
TABLES:zmatnr.
DATA : itab LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA row LIKE alsmex_tabline-row.
data : g_matnr like mara-matnr.
data : count type i.
data : itab_count type i.
data : gi_final like zmatnr occurs 0 with header line.
*data : begin of gi_final occurs 0,
      mat_old like mara-matnr,
      mat_new like mara-matnr,
      end of gi_final.
***********************Selection Screen*************************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER : pfname LIKE rlgrap-filename OBLIGATORY.
select-options : records for count.
SELECTION-SCREEN END OF BLOCK b1.
*********************At Selection Screen*************************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfname.
PERFORM search.
START-OF-SELECTION.
perform process.
form process.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = pfname
      i_begin_col             = 1
      i_begin_row             = 2
      i_end_col               = 12
      i_end_row               = 65000
    TABLES
      intern                  = itab
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
describe table itab lines itab_count.
   row = 1.
loop at itab.
    if itab-row <> row.
      append gi_final.
      clear gi_final.
    endif.
    case itab-col.
      when '1'.
      CLEAR G_MATNR.
      gi_final-OLD_MATNR = itab-value.
      CONCATENATE 'NEW' gi_final-old_matnr INTO itab-value.
        gi_final-new_MATNR = itab-value.
      endcase.
    row = itab-row.
append gi_final.
clear gi_final.
endloop.
CALL FUNCTION 'PROGRESS_INDICATOR'
EXPORTING
    I_TEXT = 'File Has Been Successfully Uploaded from Workstation ' .
if not gi_final[] is initial.
    if not records-low is initial .
      if not records-high is initial.
        records-high = records-high + 1.
        DESCRIBE TABLE gi_final LINES count.
        IF records-high < count.
          DELETE gi_final FROM records-high TO count.
        ENDIF.
        IF records-low <> 1.
          IF records-low <> 0.
            DELETE gi_final FROM 1 TO records-low.
          ENDIF.
        ENDIF.
      endif.
    endif.
endif.
IF NOT GI_FINAL[] IS INITIAL.
    CALL FUNCTION 'PROGRESS_INDICATOR'
     EXPORTING
       I_TEXT = 'Processing zmatnr table'
       I_OUTPUT_IMMEDIATELY = 'X'.
      if itab_count <> count.
         message i000 with 'records are not matching'.
         exit.
      else.
         modify zmatnr from table gi_final.
         message i000 with 'data base table modified successfully'.
      endif.
endif.
endform.
*&      Form search
      text
--> p1        text
<-- p2        text
FORM search .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static    = 'X'
    CHANGING
      file_name = pfname.
ENDFORM.                    " search
regards
siva

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

How do you read a large ( 100Mb) 3-D matrix from a file and make sure that you keep only one copy of it within the LV program for future use?

I have to deal with large 3-D, I16 matrices that are stored in files. This data represents the density of an object at a sample point in 3-D space. I need to be able to display a 2-D section through the cube in an Intensity Chart. Since I want to update images in the intensity chart in real time to show different sections on demand I cannot adopt the approach of reading a section from the file when required - the I/O time assocaited with the disk read is way to long.
The solution, is to keep EXACTLY one copy of the entire data set in memory at all times and then just get the required section on demand.
This changes the disk I/O time to a memory access time, which is fast enough for my puposes.
Here is the problem. Since the matrices are so large, I want to be very sure that I only keep one in copy of the data in memory. After a couple of weeks discussioin with Tech Support, and the development of several sample programs, they have agreed that it is not possible to do it with less than two copies of the data in memory.
This additional memory requirement is a real problem for me and I am hoping someone is ingenious enough to come up with a way of doing it with only one.
I can send a sample program illustrating the problem if necessary.
Many thanks.

Jean Pierre,
Thanks for your reply - most kind of you to take the time. But.....
This is exactly what I thought, and is similar in concept to the way I wrote my code. But it doesn't work. I modified you llb slightly by setting the variables to be I16's and setting the default array size to 54,000,000 and the default action to be initialize. ( I'll enclose a copy of my modified llb for you.)
Here's what happened. I start the windows task manager, loaded LV and the program and looked at the memory shown in the task manager. It shows about 28Mb before I start to run the program. I then single step through the program. When it gets to the output of the Initial Array the memory usage jumps to about 134Mb, indicating the creation of the first copy of the array. As you continue single stepping it jumps to 239Mb as you leave the Case loop and head for the Shift Register. This memory does not drop down again.
After talking with Platinum Tech Support, they agree and tell me that they cannot see a way to have just one copy of the array. That's why I posted it on the message board to see if there was anyone out there who had come up with an ingenious solution. It seems to be a serious limitation to labview.
Let me know what you think.
Thanks once again.
Attachments:
HugeArrayMod.llb ‏92 KB

How to Load the data from excel file(Extension is .CSV) into the temp.table

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Hello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.

How do I import pictures from computer files more than one at a time ?

I recieved the adobe photoshop elements 10 for x mas and no problems with downloading the program but i am having a time importing pictures from my computer files taken from various camaras. the problem is that i can only import pictures from my files 1 at a time. what do i do ? is there a specific tutoral i need to watch ? I know i'm doing something wrong i just don't know, please help Kev

Welcome to the forum.
You should be able to use the Shift, or Ctrl modifier keys, to select multiple files, and Import them.
Now, for Stills, I would strongly suggest that you Scale those Still Images to about the Frame Size of the Project, prior to Import.
Good luck,
Hunt

Reading long text from excel file to an internal table

Hi
Can any body tell me how to read long text from excel file to an internal table.
When i am using this FM KCD_EXCEL_OLE_TO_INT_CONVERT then it is reading only 32 characters from each cell.
But in my excel sheet in one of the cell has very long text which i need to upload into a internal table.
may i know which FM or what logic i need to use for this problem.
Regards

Hi,
Here is an example program. It will upload an Excel file with two columns. You could also assign the Excel structure dynamically, but I wanted to keep the example simple. The main point is that the internal table (it_excel in this example) must match the Excel structure that you want to convert.
Remember, this is just an example to help you figure out how to properly use the technique. It will certainly need to be modified to fit your requirements, and as always there may be a better way to get the Excel converted... this is just one possibility that has worked for me in the past.
*& Report zexcel_upload_test                            *
REPORT zexcel_upload_test.
TYPE-POOLS: truxs.
TYPES: BEGIN OF ty_excel,
         col_a(10) TYPE n,
         col_b(35) TYPE c,
       END OF ty_excel.
DATA: l_data_tab         TYPE TABLE OF string,
      l_text_data        TYPE truxs_t_text_data,
      l_gui_filename     TYPE string,
      it_excel           TYPE TABLE OF ty_excel.
FIELD-SYMBOLS: <wa_excel> TYPE ty_excel.
PARAMETERS: p_file TYPE rlgrap-filename.
* Pass the file name in the correct format
l_gui_filename = p_file.
* Upload data from PC
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = l_gui_filename
    filetype                = 'ASC'
    has_field_separator     = 'X'
CHANGING
    data_tab                = l_data_tab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    OTHERS                  = 17.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
* Convert from Excel into the appropriate itab
l_text_data[] = l_data_tab[].
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
    i_field_seperator    = 'X'
    i_tab_raw_data       = l_text_data
    i_filename           = p_file
TABLES
    i_tab_converted_data = it_excel
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
*   MESSAGE ...
EXIT.
ENDIF.
LOOP AT it_excel ASSIGNING <wa_excel>.
* Do something here...
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM filename_get CHANGING p_file.
*       FORM filename_get                                             *
FORM filename_get CHANGING p_in_file TYPE rlgrap-filename.
DATA: l_in_file TYPE string,
        l_filetab TYPE filetable,
        wa_filetab TYPE LINE OF filetable,
        l_rc       TYPE i,
        l_action   TYPE i,
        l_init_dir TYPE string.
* Set the initial directory to whatever you want it to be
l_init_dir = 'C:\'.
* Call the file open dialog without multiselect
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = 'Load file'
      default_extension       = '.XLS'
      default_filename        = l_in_file
      initial_directory       = l_init_dir
      multiselection          = 'X'
    CHANGING
      file_table              = l_filetab
      rc                      = l_rc
      user_action             = l_action
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      OTHERS                  = 4.
IF sy-subrc <> 0.
    REFRESH l_filetab.
ENDIF.
* Read the selected filename
READ TABLE l_filetab INTO wa_filetab INDEX 1.
IF sy-subrc = 0.
    p_in_file = wa_filetab-filename.
ENDIF.
ENDFORM.                    " filename_get
Regards,
Jamie

How can I prevent iTunes from copying files to C drive?

I keep all my music files on my D drive. When I installed iTunes, I made sure that each song title in the library was linked to the mp3 on the D drive. Recently I found about 155 music files that are now duplicated in a folder on my C drive named "iTunes music" Most the file modification dates are either 9/11/2010 or 10/25/2010. I tried to think of any action I've taken that might have caused this. The only unusual thing I've done recently with iTunes is try out a new accessory called TuneUp. I've used it to find album art and find details about some songs that were missing, like what album the file came from etc. Is it possible that TuneUp is creating new modified versions of the music files rather than applying the updated data to the original files on the D drive?

That sounds like a good guess.
I know nothing about TuneUp or how it works, and I can't recall where iTunes keeps it's Artwork, but they may very well be related.
Is your settings in iTunes for copying files/where they are stored correct? Perhaps installing the 3rd party application made a change to your settings.
Try tracing back one of the files to your library and see if you can identify an action you took that created the files. For example... look at one of these suspect files and find it in the iTunes library. Sort your music by Date Added and see if you can find a correlation.

Pls tell me how to upload from excel file to database.

hello,experts,
I want to upload data from excel local file to database table created by myself.when I use function
CALL FUNCTION 'GUI_DOWNLOAD'
the data in the internal table just become error code data that can not understand.
who can help me out?
thanks.

Hi,
1st copy the values in XLS into internal table by using function Module:-
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
filename = file_name<it is file path of u r XLS>
i_begin_col = 1
i_begin_row = 1
i_end_col = 250
i_end_row = 1
tables
intern = itab<this structure is same like u r database table>
exceptions
inconsistent_parameters = 1
upload_ole = 2
others = 3.
if sy-subrc 0.
then modify or insert these values to database from internal table:-
modify <DB table> from itab accepting duplicate keys.
for file popup use :
at selection-scree on <screen field>.
call function 'F4_FILENAME'
exporting
   program = sy-cprog
   dynnr     = sy-dynnr
importing
   filename = zfilename.
here zfilename of type rlgrap-filename.
and pass this as path in ASLA_EXCEL_TO_INTERNAL_TABLE
Edited by: vijay Mekala on Dec 29, 2007 12:45 PM

How to transfer data from excel files into z-tables

Please help me with a code which transfers data from excel file to z-table.
Thanks in advance
Shuvir

Hi Daniel,
Export Data
Purpose
Use this procedure to export SAP data to a local file such as Microsoft Excel.
Menu Path
Use the following menu path to begin this process:
·         SystemèListèSaveèLocal File
Helpful Hints
When reviewing fields, R = Required, O = Optional and C = Conditional.
Procedure
1.       Start the transaction using the menu path or transaction code.
      Whatever Data You Want to Export
2.       Select SystemèListèSaveèLocal File. This works well for any data in SAP. This is the only option for the top-level (first page) of a report.
In a drill-down view within a report the Local File button on the toolbar may be used and has the same options.
      Choose File Format
3.       Click .
4.       Click to continue. If prompted for a format after choosing Spreadsheet, select Excel Table to get an Excel file that can be modified more easily.
      Choose File Save Location Step 1
5.       Click to the right of the Directory field to choose a different location.
      Choose File Save Location Step 2
6.       Click or browse your computer to locate the directory where you want to save your file.
7.       Complete the following field:
·         File name:
    You must add the proper file extension to the name of your file (.xls for Excel, .rtf for Rich Text, .html for HTML). The file extension tells your computer what program to open the file with. If you do not have the file extension at the end, you may not be able to open it.
8.       Click to continue.
      Generate File in Location and Format Selected
9.       Click to create the file in the location and format selected. In this example the file was named "example.xls" and saved on the desktop.
Result
You have completed the export process.
thanks
karthik

Modifying a bitstream from a file

Similar Messages

Maybe you are looking for