Modifying data in Table Control thr' BDC
Hi,
I have a following requirement.
I need to modify(update/delete) the data in the table control through BDC. The number of records of the table control, seen on the screen are only 4. If i need to modify 11th record, how do i go forward?
Your help is highly appreciated.
Regards
Shankar
Due to rudeness, your thread is denied.
Note. If you want help from people it's best to a) follow the rules, and b) not antagonise those who could help you.
locked.
Similar Messages
-
How to transfer data in table control in bdc
hi
how to transfer data in table control in bdc . I need the theory regarding this
byeHi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan -
How to modify data in table control
hi
i have created table control where i have displayed data into table control
logic used
screen 200
PROCESS BEFORE OUTPUT.
MODULE SELECT_RECORD.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TBC_200'
MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
LOOP AT IT_MARA
INTO WA_MARA
WITH CONTROL TBC_200
CURSOR TBC_200-CURRENT_LINE.
MODULE TBC_200_GET_LINES.
*&SPWIZARD: MODULE TBC_200_CHANGE_FIELD_ATTR
ENDLOOP.
MODULE STATUS_0200.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TBC_200'
LOOP AT IT_MARA.
CHAIN.
FIELD WA_MARA-MATNR.
FIELD WA_MARA-ERSDA.
FIELD WA_MARA-ERNAM.
MODULE TBC_200_MODIFY ON CHAIN-REQUEST.
ENDCHAIN.
FIELD WA_MARA-MARK
MODULE TBC_200_MARK ON REQUEST.
ENDLOOP.
MODULE TBC_200_USER_COMMAND.
*&SPWIZARD: MODULE TBC_200_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TBC_200_CHANGE_COL_ATTR.
module -
MODULE SELECT_RECORD.
MODULE SELECT_RECORD OUTPUT.
SELECT MATNR ERSDA ERNAM
FROM MARA
INTO CORRESPONDING FIELDS OF TABLE it_mara.
ENDMODULE. " SELECT_RECORD OUTPUT
and
another thing
i have made field MARA-ERSDA. and FIELD WA_MARA-ERNAM editable by
input possible using layout
so
now those 2 fields contents are editable
i want to know how to edit and save the data
some body guide.
and i want to put the lock so that i can update
can tell how to implement lock.
Thanks
Edited by: viju bangalore on Jan 27, 2011 10:40 AMHi Viju,
In PAI do something like this
LOOP AT itab.
MODULE mod_table_control.
ENDLOOP.
MODULE user_command_0100.
at module mod_table_control put this
MODULE mod_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
if sy-subrc ne 0.
insert itab.
endif.
ENDMODULE.
for saving you can create at custom gui status with a save button, and at MODULE user_command_0100 save the data. -
How populate the data in table control in BDC?
pls urgent?
hi,
see the below code .
FORM create_bdc_session .
DATA : w_saved_tx.
DATA g_r_itab TYPE typ_itab_rec.
CLEAR g_t_itab.
CLEAR g_r_itab.
LOOP AT g_t_itab INTO g_r_itab.
skip error lines
IF g_r_itab-ebeln = 'ERROR'.
CONTINUE.
ENDIF.
open Bdc session
AT FIRST.
PERFORM bdc_open_group.
ENDAT.
g_t_itab = g_r_itab.
On change in agreement number
AT NEW ebeln.
PERFORM bdc_header.
CLEAR: w_dtl_cnt_i, w_line_i.
ENDAT.
save at full page
IF w_line_i > 11.
PERFORM bdc_save.
PERFORM bdc_header_change.
w_line_i = 1.
ENDIF.
detail material processing
PERFORM bdc_detail.
CLEAR w_saved_tx .
save at end of agreement
AT END OF ebeln.
IF w_saved_tx NE 'Y' AND w_dtl_cnt_i > 0.
PERFORM bdc_save.
ENDIF.
w_saved_tx = 'Y'.
ENDAT.
ENDLOOP.
PERFORM bdc_close_group.
ENDFORM. " CREATE_BDC_SESSION
*& Form BDC_OPEN_GROUP
text
--> p1 text
<-- p2 text
FORM bdc_open_group .
DATA w_user_tx LIKE apqi-userid.
w_user_tx = sy-uname.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = p_bdc
keep = 'X'
user = w_user_tx
EXCEPTIONS
client_invalid = 01
destination_invalid = 02
group_invalid = 03
holddate_invalid = 04
internal_error = 05
queue_error = 06
running = 07
user_invalid = 08.
CASE sy-subrc.
WHEN 0.
WHEN OTHERS.
WRITE: / 'BDC OPEN ERROR', sy-subrc.
ENDCASE.
ENDFORM. " BDC_OPEN_GROUP
*& Form BDC_HEADER
text
--> p1 text
<-- p2 text
FORM bdc_header .
REFRESH bdcdata.
CLEAR bdcdata.
determine now if text exists
CLEAR w_text_lines_i.
Transaction ME31K.
PERFORM bdc_dynpro USING 'SAPMM06E' '0200'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'EKKO-LIFNR' g_t_itab-lifnr.
PERFORM bdc_field USING 'RM06E-EVART' 'MK'.
PERFORM bdc_field USING 'RM06E-EVRTN' g_t_itab-ebeln.
PERFORM bdc_field USING 'EKKO-EKORG' g_t_itab-ekorg.
PERFORM bdc_field USING 'EKKO-EKGRP' g_t_itab-ekgrp.
Item category is on a detail line, but is entered on the entry screen
IF g_t_itab-pstyp = '3'.
g_t_itab-pstyp = 'L'.
ELSE.
CLEAR g_t_itab-pstyp.
ENDIF.
PERFORM bdc_field USING 'RM06E-EPSTP' g_t_itab-pstyp.
PERFORM bdc_field USING 'RM06E-WERKS' p_nwerks.
PERFORM bdc_field USING 'RM06E-LGORT' g_t_itab-lgort.
PERFORM bdc_dynpro USING 'SAPMM06E' '0201'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'EKKO-WAERS' g_t_itab-waers.
WRITE sy-datum TO w_date_tx DD/MM/YYYY.
PERFORM bdc_field USING 'EKKO-KDATB' '01.06.2004'.
PERFORM bdc_field USING 'EKKO-KDATE' '31.12.2999'.
w_tcode = 'ME31K'.
ENDFORM. " BDC_HEADER
*& Form BDC_SAVE
text
--> p1 text
<-- p2 text
FORM bdc_save .
final save
PERFORM bdc_dynpro USING 'SAPMM06E' '0220'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
needed for some boxes (save anyway message)
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '=YES'.
Insert the transaction into the BDC session.
PERFORM bdc_insert USING w_tcode.
REFRESH bdcdata.
CLEAR bdcdata.
ENDFORM. " BDC_SAVE
*& Form BDC_HEADER_change
text
--> p1 text
<-- p2 text
FORM bdc_header_change .
DATA: w_pos LIKE rm06e-ebelp.
REFRESH bdcdata.
CLEAR bdcdata.
determine now if text exists
CLEAR w_text_lines_i.
Transaction ME32K.
PERFORM bdc_dynpro USING 'SAPMM06E' '0205'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RM06E-EVRTN' g_t_itab-ebeln.
PERFORM bdc_dynpro USING 'SAPMM06E' '0220'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
w_pos = g_t_itab-ebelp - 10.
PERFORM bdc_field USING 'RM06E-EBELP' w_pos.
w_tcode = 'ME32K'.
ENDFORM. " BDC_HEADER_change
*& Form BDC_INSERT
text
-->P_W_TCODE text
FORM bdc_insert USING p_w_tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = w_tcode
TABLES
dynprotab = bdcdata
EXCEPTIONS
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
CASE sy-subrc.
WHEN 0.
WHEN OTHERS.
WRITE: / 'BDC INSERT ERROR', sy-subrc.
ENDCASE.
ENDFORM. " BDC_INSERT
*& Form BDC_CLOSE_GROUP
text
--> p1 text
<-- p2 text
FORM bdc_close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 0.
WHEN OTHERS.
WRITE: / 'BDC CLOSE ERROR', sy-subrc.
ENDCASE.
ENDFORM. " BDC_CLOSE_GROUP
*& Form bdc_dynpro
text
-->P_0658 text
-->P_0659 text
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0688 text
-->P_W_POS text
FORM bdc_field USING field value.
CLEAR bdcdata.
bdcdata-fnam = field.
bdcdata-fval = value.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
*& Form load_dataset
text
--> p1 text
<-- p2 text
FORM load_dataset .
load dataset
LOOP AT g_t_itab INTO g_r_itab.
Load dataset with records needed for direct input
MOVE-CORRESPONDING g_r_itab TO g_t_itab.
AT NEW ebeln.
PERFORM load_dataset_mbepoh USING w_phys_outfil1_tx.
ENDAT.
PERFORM load_dataset_mbepoi USING w_phys_outfil1_tx.
ENDLOOP.
ENDFORM. " load_dataset
*& Form load_dataset_mbepoh
text
-->P_W_PHYS_OUTFIL1_TX text
FORM load_dataset_mbepoh USING p_dataset.
CLEAR rec1.
MOVE-CORRESPONDING g_t_itab TO rec1.
rec1-stype = '1'.
rec1-ernam = sy-uname.
TRANSFER rec1 TO p_dataset.
ENDFORM. " load_dataset_mbepoh
*& Form load_dataset_mbepoi
text
-->P_W_PHYS_OUTFIL1_TX text
FORM load_dataset_mbepoi USING p_dataset.
CLEAR rec2.
fields for MBEPOH
ADD 1 TO w_good_i.
MOVE-CORRESPONDING g_t_itab TO rec2.
rec2-stype = '2'.
rec2-werks = p_nwerks.
rec2-ematn = g_t_itab-matnr.
TRANSFER rec2 TO p_dataset.
ENDFORM. " load_dataset_mbepoi
*& Form BDC_DETAIL
text
--> p1 text
<-- p2 text
FORM bdc_detail .
DATA: w_ktmng_tx(11),
w_peinh_tx(5) TYPE c,
w_price_p(13) TYPE p DECIMALS 6,
w_price2_p(13) TYPE p DECIMALS 2,
w_price3_p(13) TYPE p DECIMALS 3,
w_price0_p(13) TYPE p DECIMALS 0,
w_cent_p TYPE p DECIMALS 2,
w_peinh_n(5) TYPE n,
w_price_tx(14).
accumulate lines to determine if page_down required
ADD 1 TO w_addit_i.
ADD 1 TO w_dtl_cnt_i.
ADD 1 TO w_line_i.
IF w_line_i > 12.
w_line_i = 2.
PERFORM bdc_dynpro USING 'SAPMM06E' '0220'.
PERFORM bdc_field USING 'BDC_OKCODE' '=NP'.
ENDIF.
get material unit of measure
CLEAR mara-meins.
SELECT SINGLE * FROM mara WHERE matnr = g_t_itab-matnr.
w_price_tx = g_t_itab-netpr.
w_peinh_tx = g_t_itab-peinh.
IF g_t_itab-ktmng = 0.
g_t_itab-ktmng = 1.
ENDIF.
w_ktmng_tx = g_t_itab-ktmng.
get decimal places of currency
TCURX-CURRDEC = 2.
SELECT SINGLE * FROM TCURX WHERE CURRKEY = g_t_itab-waers.
multiply Price
W_PRICE_P = g_t_itab-netpr.
CASE TCURX-CURRDEC.
WHEN 0.
W_PRICE_P = g_t_itab-netpr * 100.
W_PRICE0_P = W_PRICE_P.
W_PRICE_TX = W_PRICE0_P.
WHEN 2.
W_PRICE2_P = W_PRICE_P.
W_PRICE_TX = W_PRICE2_P.
WHEN 3.
W_PRICE3_P = W_PRICE_P.
W_PRICE_TX = W_PRICE3_P.
ENDCASE.
material overview screen (with enter)
PERFORM bdc_dynpro USING 'SAPMM06E' '0220'.
PERFORM bdc_field USING 'BDC_OKCODE' '=DETA'.
PERFORM bdc_field_idx USING 'RM06E-TCSELFLAG' 'X' w_line_i.
PERFORM bdc_field_idx USING 'EKPO-EMATN' g_t_itab-matnr w_line_i.
PERFORM bdc_field_idx USING 'EKPO-KTMNG' w_ktmng_tx w_line_i.
PERFORM bdc_field_idx USING 'EKPO-NETPR' w_price_tx w_line_i.
PERFORM bdc_field_idx USING 'EKPO-PEINH' w_peinh_tx w_line_i.
PERFORM bdc_field_idx USING 'EKPO-BPRME' mara-meins w_line_i.
PERFORM bdc_field_idx USING 'EKPO-WERKS' p_nwerks w_line_i.
PERFORM bdc_field_idx USING 'EKPO-LGORT' g_t_itab-lgort w_line_i.
IF g_t_itab-pstyp = '3'.
g_t_itab-pstyp = 'L'.
ELSE.
CLEAR g_t_itab-pstyp.
ENDIF.
PERFORM bdc_field_idx USING 'RM06E-EPSTP' g_t_itab-pstyp w_line_i.
item details screen
PERFORM bdc_dynpro USING 'SAPMM06E' '0211'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OR'.
PERFORM bdc_field USING 'EKPO-SPINF' 'B'.
PERFORM bdc_field USING 'EKPO-BSTAE' '0001'.
PERFORM bdc_field USING 'EKPO-MWSKZ' g_t_itab-mwskz.
PERFORM bdc_field USING 'EKPO-IDNLF' g_t_itab-idnlf.
PERFORM bdc_field USING 'EKPO-REPOS' 'X'.
PERFORM bdc_field USING 'EKPO-EVERS' g_t_itab-evers.
PERFORM bdc_field USING 'EKPO-KZABS' 'X'.
PERFORM bdc_field USING 'EKPO-NETPR' w_price_tx. "deliberate
PERFORM bdc_field USING 'EKPO-PEINH' w_peinh_tx . "Overwriting
Source list
PERFORM bdc_dynpro USING 'SAPLMEOR' '0220'.
PERFORM bdc_field USING 'BDC_OKCODE' 'EN'.
PERFORM bdc_field USING 'BDC_CURSOR' 'EORD-AUTET(01)'.
PERFORM bdc_field USING 'EORD-VDATU(01)' '01062004'.
PERFORM bdc_field USING 'EORD-BDATU(01)' '31122999'.
PERFORM bdc_field USING 'EORD-FEBEL(01)' ' '.
PERFORM bdc_field USING 'EORD-AUTET(01)' '1'.
GOTO Conditions
PERFORM bdc_dynpro USING 'SAPMM06E' '0211'.
PERFORM bdc_field USING 'BDC_OKCODE' '=KO'.
PERFORM bdc_dynpro USING 'SAPMV13A' '0201'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BACK'.
ENDFORM. " BDC_DETAIL
*& Form BDC_FIELD_IDX
text
-->P_1390 text
-->P_G_T_ITAB_PSTYP text
-->P_W_LINE_I text
FORM bdc_field_idx USING field LIKE bdcdata-fnam
value p_index TYPE i.
DATA: w_index_tx(2).
UNPACK p_index TO w_index_tx.
CLEAR bdcdata.
CONCATENATE field '(' w_index_tx ')' INTO field.
bdcdata-fnam = field.
bdcdata-fval = value.
APPEND bdcdata.
ENDFORM. " BDC_FIELD_IDX
regards, -
How to delete data in table control
Hi,
I am doing module pool programming. After the user enters the data in table control after saving the data. if the user wants to remove the line item the line item shd be removed from the screen and data base.
Please Give me vaulable Suggestions
RegardsHi,
Screen 8002 (with table control) --> select records --> press delete button --> delete selected records
Now you wan to delete those records selected by the user at runtime when DELETE button is clicked.
Take another internal table and work area same as the initial internal table and work area used in screen 8002 which is to be used to delete the selected data.
Take the names of the input/output fields as work_area-field_name and select column in table control as work_area-flag.
Also take a flag field of size 1 datatype character as the last field in the internal table and work area while declaration.
You must have passed a code in PBO of the screen for reading internal table into the table control.
So it reads the internal table into the table control whenever you perform any action on use command.
All you need to do is to write a code to modify the internal table form the table control while performing any user action.
Remember to change the LINE SEL option in attributes of table control as MULTIPLE.
At screen logic,
PROCESS BEFORE OUTPUT.
MODULE status_8002. "for pf-status
LOOP WITH CONTROL po_tab. "po_tab is table control
MODULE pass_data. "to pass data into table control from internal table
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_8002. "for user command(back and exit)
LOOP WITH CONTROL po_tab.
MODULE modify_data. "to modify data from table control into table control
ENDLOOP.
MODULE delete. "to delete the selected records
In PBO,
*& Module STATUS_8002 OUTPUT
MODULE status_8002 OUTPUT.
SET pf-status 'ZAB_PFSTA'. " pf-status
DATA : line_count TYPE i.
DESCIRBE TABLE it_ekpo
LINES line_count.
po_tab-lines = line_count + 10.
" to make table control scrollable
ENDMODULE. " STATUS_8002 OUTPUT
*& Module PASS_DATA OUTPUT
MODULE pass_data OUTPUT.
READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
ENDMODULE. " PASS_DATA OUTPUT
"it_ekpo is internal table and wa_ekpo is the work area
In PAI,
*& Module MODIFY_DATA INPUT
MODULE MODIFY_DATA INPUT.
MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
"modify records from table control into the internal table
ENDMODULE. " MODIFY_DATA INPUT
*& Module DELETE INPUT
MODULE DELETE INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'. "when delete button is clicked
SORT IT_EKPO BY FLAG DESCENDING. "sort by flag(selection column value)
CLEAR WA_EKPO1.
CLEAR WA_EKPO.
REFRESH IT_EKPO1.
LOOP AT IT_EKPO INTO WA_EKPO WHERE FLAG = 'X'.
DATA : J TYPE I.
CLEAR J.
J = SY-TABIX. "assign index value if a record is selected
MOVE-CORRESPONDING WA_EKPO TO WA_EKPO1. "append selected records to another
"work area and append to another internal table to delete
APPEND WA_EKPO1 TO IT_EKPO1.
DELETE IT_EKPO. "delete the selected records from initial internal table
" to reflect the changes on the table control
ENDLOOP.
IF J = 0.
MESSAGE I006. "if no record selected
ELSE. "if some records are selected
DELETE ZEKPO FROM TABLE IT_EKPO1. "delete from database table
COMMIT WORK.
IF SY-SUBRC = 0.
MESSAGE S007. "success message (records deleted)
ENDIF.
ENDIF.
ENDCASE.
ENDMODULE. " DELETE INPUT
Now at PAI, you have delete records and these changes are reflected back to the internal table.
Now when PBO is executed it will again read the initial internal table and will not show the deleted records.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir -
How to modify changes of table control data in PAI
I have a table control where the columns are brought by dict fields.I am able to bring data into table control through an itab.
Now what i want is whenever user edits data in table control and clicks on save button the corresponding changes should be made in database.
For this according to my understanding we need to (in PAI) modify the changes in itab from the table control and then in SY-UCOMM of SAVE button we need to update in database table using itab.
For this , I am not able to write code for modifying the changes in itab from table control. Here is my code below.Please tell me how to do this.
PROCESS BEFORE OUTPUT.
MODULE FILL_DATA.
LOOP AT ITAB INTO ZEMPLOYEE_MASTER WITH CONTROL EMPTABLE CURSOR
EMPTABLE-CURRENT_LINE.
ENDLOOP.
MODULE STATUS_0001.
PROCESS AFTER INPUT.
LOOP AT ITAB.
MODULE MODIFY_ITAB.
ENDLOOP.
MODULE USER_COMMAND_0001.
REPORT ZDATA_FORM1.
TABLES: ZEMPLOYEE_MASTER.
CONTROLS EMPTABLE TYPE TABLEVIEW USING SCREEN 0001.
data: begin of itab occurs 0,
emp_no like zemployee_master-emp_no,
name like zemployee_master-name,
city like zemployee_master-city,
end of itab,
rowno TYPE I VALUE 1.
*& Module STATUS_0001 OUTPUT
* text
MODULE STATUS_0001 OUTPUT.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0001 OUTPUT
*& Module USER_COMMAND_0001 INPUT
* text
MODULE USER_COMMAND_0001 INPUT.
MESSAGE 'Inside INPUT' TYPE 'I'.
CASE SY-UCOMM.
WHEN 'SAVE'.
UPDATE zemployee_master.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0001 INPUT
*& Module fill_data OUTPUT
* text
MODULE fill_data OUTPUT.
select emp_no name city from zemployee_master into TABLE itab ORDER BY emp_no.
Describe table itab lines EMPTABLE-LINES.
ENDMODULE. " fill_data OUTPUT
*& Module modify_itab INPUT
* text
MODULE modify_itab INPUT.
* MODIFY itab from zemployee_master index
* MESSAGE 'Inside modify_itab' TYPE 'I'.
ENDMODULE. " modify_itab INPUTHi
In the following module of your code
MODULE modify_itab INPUT.
MODIFY itab from zemployee_master index tc-current_line " Where TC is the name of the Table control on the Screen
ENDMODULE.
Table control data gets refreshed on *enter*
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2165e990-0201-0010-5cbb-b5c2ad436140
Cheerz
Ramchander Rao.K -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
Wanted a code for table controls in bdc
hi,
i have written code for uploading data into FB60 transaction but i have a serious problem with that code.
after entering 10 line items and when i am entering 11th item it is saying that the screen doesnot contain 11th line.
so please modify my program or if you can please send me a program for handling table controls more line details.
thanks and i will surely provide ten points to it.
my code is
LOOP AT I_PREPARE INTO WA_PREPARE.
V_VALUE = WA_PREPARE-LINE+0(2).
CASE V_VALUE.
WHEN 'A'.
CLEAR:V_DCNT.
*UPLOAD THE COMPANY CODE TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+2(4).
*? filling header data
*********to initialize the company code and to get the popup**********
PERFORM SET_BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLACHD' '1000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'BKPF-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
BUKRS = WA_PREPARE-LINE+2(4).
PERFORM BDC_FIELD USING 'BKPF-BUKRS'
BUKRS.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
*UPLOAD THE VENDOR NUMBER TO FB60
*PERFORM.......USING WA_PREPARE-LINE+45(10).
ACCNT = WA_PREPARE-LINE+45(10).
PERFORM BDC_FIELD USING 'INVFO-ACCNT'
ACCNT.
*UPLOAD THE DATE TO FB60
WRITE WA_PREPARE-LINE+34(8) TO V_DATE USING EDIT MASK ' . . .'
*PERFORM.......USING V_DATE.
PERFORM BDC_FIELD USING 'INVFO-BLDAT'
'15.09.2004'.
PERFORM BDC_FIELD USING 'INVFO-BUDAT'
'15.09.2004'.
*UPLOAD THE AMOUNT TO FB60
*PERFORM.......USING WA_PREPARE-LINE+85(15).
WRBTR = WA_PREPARE-LINE+85(15).
PERFORM BDC_FIELD USING 'INVFO-WRBTR'
WRBTR.
*UPLOAD THE CURRENCY CODE TO FB60
*PERFORM.......USING WA_PREPARE-LINE+100(3).
WAERS = WA_PREPARE-LINE+100(3).
PERFORM BDC_FIELD USING 'INVFO-WAERS'
WAERS.
WHEN 'D'.
V_DCNT = V_DCNT + 1.
IF V_DCNT GT 04.
V_DCNT = 04.
ENDIF.
*UPLOAD THE G/L ACC. TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+51(20).
*? filling item data
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
FNAM.
CONCATENATE 'ACGL_ITEM-HKONT(' V_DCNT ')' INTO FNAM.
HKONT = WA_PREPARE-LINE+51(20).
PERFORM BDC_FIELD USING FNAM
HKONT.
*UPLOAD THE AMOUNT TO FB60(ACGL_ITEM-WRBTR)
*PERFORM........USING WA_PREPARE-LINE+121(15).
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
WRBTR = WA_PREPARE-LINE+75(15).
PERFORM BDC_FIELD USING FNAM
WRBTR.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=0006'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
ENDCASE.hi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
REPORT ZSR_BDC_TBCTRL
NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
BANKS(6) TYPE C,
BANKL(17) TYPE C,
BANKN(19) TYPE C,
END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
BANKS LIKE LFBK-BANKS,
END OF BANKS,
BEGIN OF BANKL OCCURS 0,
BANKL LIKE LFBK-BANKL,
END OF BANKL,
BEGIN OF BANKN OCCURS 0,
BANKN LIKE LFBK-BANKN,
END OF BANKN.
DATA : FLD(20) TYPE C,
CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'Z:\sr.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
REFRESH BDCDATA.
REFRESH : BANKS,BANKL,BANKN..
SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
IT_VEN-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
IT_VEN-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
IT_VEN-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
IT_VEN-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
IT_VEN-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
IT_VEN-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
'10020030'.
*perform bdc_field using 'LFBK-BANKL(02)'
'67270003'.
*perform bdc_field using 'LFBK-BANKN(01)'
'12345'.
*perform bdc_field using 'LFBK-BANKN(02)'
'66666'.
MOVE 1 TO CNT.
LOOP AT BANKS.
CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKS-BANKS.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKL.
CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKL-BANKL.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKN.
CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKN-BANKN.
CNT = CNT + 1.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP. -
How to use table control in bdc, plz somebody tell me.
Hi Gurus,
Ples tell me
how to use table control in bdc, plz somebody tell me.
And send Sample CODE also. Thnaks in advance.hi,
Table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen?
Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
we can determine the number of visible lines on Transaction Screen from our Calling BDC program.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference
in Static ASSIGN and Dynamic ASSIGN.
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6
using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: , , .
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to ,
name2 to ,
name3 to .
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using DataTable-matnr.
perform bdcfield using DataTable-menge.
perform bdcfield using DataTable-indicator.
endloop.
enddo.
example 1
BDC table control is an area on the screen in which you can display data in tabular form. You process it using a loop. Table controls are comparable to step loop tables. While a table control consists of a single definition row, step loop blocks may extend over more than one row. Table controls are more flexible than step loops, and are intended to replace them
When you need to handle a scenario like in sales order,it may contain more than one material,if you have more than one material We have to use table control,it will have number of columns and number of rows.
Table controls allow you to enter, display, and modify tabular data easily on the screen
Check this code,
PARAMETERS: file1 LIKE rlgrap-filename.
*Internal Table Declarations
DATA: BEGIN OF itab OCCURS 0,
matnr(18) TYPE c, "MaterialNumber
werks(4) TYPE c, "Plant
vdatu(10) TYPE c, "Valid From Date
bdatu(10) TYPE c, "Valid To Date
lifnr(10) TYPE c, "Vendor Number
ekorg(4) TYPE c, "Purchasing Organization
feskz TYPE c, "Fixed
autet TYPE c, "MRP Indicator
END OF itab.
DATA: bdcdata LIKE TABLE OF bdcdata WITH HEADER LINE.
*VARIABLES Declarations
DATA: wa1 LIKE LINE OF itab. "Workarea for ITAB
DATA: n TYPE i, "Check
count TYPE i.
DATA: cnt(2), "Counter
wa(15). "Workarea to hold concatenatedvalue
DATA v_msg(100).
DATA: flag.
DATA: file TYPE string.
*Initialization event
INITIALIZATION.
*At-selection-screen event
*To provide Input help for file name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = file1.
*START-OF-SELECTION EVENT
START-OF-SELECTION.
MOVE file1 TO file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*To populate BDCDATA and start data transfer
LOOP AT itab .
To validate Plant range
IF itab-werks = '1000' OR itab-werks = '2000'
OR itab-werks = '1008'.
AT NEW werks.
CLEAR: n.
cnt = 1.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EORD-MATNR'
itab-matnr.
PERFORM bdc_field USING 'EORD-WERKS'
itab-werks.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING 'BDC_CURSOR'
wa.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDAT.
IF n = 12.
READ TABLE bdcdata WITH KEY fval = '=BU'.
bdcdata-fval = '=NS'.
MODIFY bdcdata INDEX sy-tabix TRANSPORTING fval.
PERFORM bdc_dynpro USING 'SAPLMEOR' '0205'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EORD-VDATU(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
cnt = 2.
n = 2.
ENDIF.
CONCATENATE 'EORD-VDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-vdatu.
CONCATENATE 'EORD-BDATU(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-bdatu.
CONCATENATE 'EORD-LIFNR(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-lifnr.
CONCATENATE 'EORD-EKORG(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-ekorg.
CONCATENATE 'RM06W-FESKZ(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-feskz.
CONCATENATE 'EORD-AUTET(' cnt ')' INTO wa.
PERFORM bdc_field USING wa
itab-autet.
IF n <> 12.
n = cnt.
ENDIF.
cnt = cnt + 1.
AT END OF werks.
CALL TRANSACTION 'ME01' USING bdcdata
UPDATE 'S'
MODE 'A'.
CLEAR:bdcdata,bdcdata[].
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = 'EN'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = v_msg.
WRITE:/ v_msg.
CLEAR: bdcdata,bdcdata[],flag.
ENDAT.
ENDIF.
ENDLOOP.
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.
Insert field values
FORM bdc_field USING fnam fval.
IF NOT fval IS INITIAL.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
CLEAR wa.
ENDFORM.
Sample code 2
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards -
How to populate data in table control .
hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM -
Error while uploading data in table t_499s through BDC Prog
Hi
am facing problem while uploading data in table t_499s through BDC Program , if there is more than 15 records in file its not allowing to upload kindly suggest what to do
Thanx
Mukesh sHi,
See if you want to update only single table, which has User maintenance allowed
Use Modify statement.
EX:
LOOP AT ITAB INTO WA_TAB.
MOVE-CORRESPONDING WA_TAB TO T499S.
MODIFY T499S.
CLEAR T499S.
ENDLOOP.
It will update the table, to check go to sm30 , and check in V_T499S.
Rgds
Aeda -
Hai Experts,
i have problem with table control in bdc, can any tell me wat exact code for table control in bdc,n plz give flat file for this prm or any related
HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORMHi Rajesh,
I will send a sample code 4 ur problem check it once.And also i will attach a FLAT FILE at the end of program check it once.Plz copy the below code and execute it ok...
*& Report YBDC_MB1C_HEADER_ITEM_CALLTRA *
*& DEVELOPER : KIRAN KUMAR.G *
*& PURPOSE : UPLOAD DATA(T.CODE = MB1C) INTO DATABASE(CALL TRANS) *
*& CREATION DT: 5/12/2007 *
*& REQUEST : ERPK900035 *
REPORT YBDC_MB1C_HEADER_ITEM_CALLTRA.
Global BDC And Message Structures
DATA: gt_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE,
gt_msgtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
Global Variables For File Path And Messages
DATA: gv_infile TYPE string, "For Path Selection
gv_msg TYPE string. "For Message Printing
For Elimination Of Illegal Screens
DATA: opt TYPE ctu_params.
Global Variables
DATA: gv_num(2) TYPE n,
gv_matnr(20),
gv_erfmg(20).
gv_num = 1.
Internal Table
DATA: BEGIN OF gt_data OCCURS 0,
f1(20),
f2(20),
f3(20),
f4(20),
f5(20),
f6(20),
f7(20),
f8(20),
f9(20),
END OF gt_data.
Selection Criteria
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename,
p_mode.
SELECTION-SCREEN : END OF BLOCK b1.
Selection Path
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM selection_path.
START-OF-SELECTION.
opt-nobinpt = 'X'.
opt-defsize = 'X'.
opt-updmode = 'A'.
Upload the data
PERFORM upload_data.
END-OF-SELECTION.
Populate Data Into BDCDATA Structure
PERFORM populate_data.
*& Form selection_path
text
--> p1 text
<-- p2 text
FORM selection_path .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
IMPORTING
file_name = p_file.
gv_infile = p_file.
ENDFORM. " selection_path
*& Form upload_data
text
--> p1 text
<-- p2 text
FORM upload_data .
REFRESH : gt_data.
CLEAR : gt_data.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gv_infile
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = gt_data
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " upload_data
*& Form Populate_data
text
--> p1 text
<-- p2 text
FORM populate_data .
LOOP AT gt_data.
*Header Information
IF gt_data-f1 = 'H'.
PERFORM firstscreen.
CLEAR gt_data.
ENDIF.
*Item Information
IF gt_data-f1 = 'I'.
PERFORM secondscreen.
*Save data and call the Call Transaction Method
AT END OF f1.
PERFORM save.
CALL TRANSACTION 'MB1C' USING gt_bdcdata MODE p_mode
MESSAGES INTO gt_msgtab.
PERFORM messages.
REFRESH gt_bdcdata.
CLEAR gv_num. "USED IN CONCATENATE STEP
ENDAT.
gv_num = gv_num + 1.
ENDIF. "End of Item Data
ENDLOOP.
ENDFORM. " Populate_data
*& Form firstscreen
text
--> p1 text
<-- p2 text
FORM firstscreen .
PERFORM bdc_dynpro USING 'SAPMM07M' '0400'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MKPF-BKTXT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MKPF-BLDAT'
gt_data-f2.
PERFORM bdc_field USING 'MKPF-BUDAT'
gt_data-f3.
PERFORM bdc_field USING 'MKPF-BKTXT'
gt_data-f4.
PERFORM bdc_field USING 'RM07M-BWARTWA'
gt_data-f5.
PERFORM bdc_field USING 'RM07M-WERKS'
gt_data-f6.
PERFORM bdc_field USING 'RM07M-LGORT'
gt_data-f7.
PERFORM bdc_field USING 'XFULL'
'X'.
PERFORM bdc_field USING 'RM07M-WVERS2'
'X'.
PERFORM bdc_dynpro USING 'SAPMM07M' '0421'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MSEG-ERFMG(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDFORM. " firstscreen
*& Form secondscreen
text
--> p1 text
<-- p2 text
FORM secondscreen .
CONCATENATE 'MSEG-MATNR(' gv_num ')' INTO gv_matnr.
CONCATENATE 'MSEG-ERFMG(' gv_num ')' INTO gv_erfmg.
PERFORM bdc_field USING 'MSEGK-KUNNR'
gt_data-f2.
PERFORM bdc_field USING gv_matnr
gt_data-f3.
PERFORM bdc_field USING gv_erfmg
gt_data-f4.
PERFORM bdc_field USING 'DKACB-FMORE'
'X'.
ENDFORM. " secondscreen
*& Form save
text
--> p1 text
<-- p2 text
FORM save .
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
ENDFORM. " save
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR gt_bdcdata.
gt_bdcdata-program = program.
gt_bdcdata-dynpro = dynpro.
gt_bdcdata-dynbegin = 'X'.
APPEND gt_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
CLEAR gt_bdcdata.
gt_bdcdata-fnam = fnam.
gt_bdcdata-fval = fval.
APPEND gt_bdcdata.
ENDFORM. "BDC_FIELD
*& Form messages
text
--> p1 text
<-- p2 text
FORM messages .
LOOP AT gt_msgtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = sy-msgid
lang = sy-langu
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
IMPORTING
msg = gv_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-tabix EQ 1.
WRITE:/ 'Process Log' COLOR 3.
ENDIF.
WRITE:/ gv_msg.
ENDLOOP.
REFRESH : gt_msgtab.
CLEAR : gt_msgtab.
ENDFORM. " messages
FLAT FILE
*H 10012005 20022005 HEADER 451 1000 0001
*I 1 100-300 5
*I 1 100-400 3
*I 1 100-100 12
*H 12012005 12022005 HEADER 451 1000 0001
*I 2 100-200 4
General Information(t.code= MB1C)
*DOC DATE : 10.1.2005 POSTING DATE : 20.2.2005
*HEADER TEXT : HEADER
*MATERIAL TYPE :451 PLANT : 1000
*STORAGE LOCATION : 0001
*CUSTOMER :1
*MATERIAL NO : 100-300
*QUANTITY : 5
*BUSINESS AREA : 0001
Award points if helpful
Kiran Kumar.G.A -
How to clear data in Table Control.
hi! all
How to clear the data in table control.
i have a Table control which displays column A data from the previous screen and allows to enter column B and column C and i have a button CLEAR, when i click CLEAR button the Data displaying in table control has to be cleared. how to do it.
Regards,
NagulanHi,
Loop over the internal table of table control & clear data from table control.
loop at tctab.
clear tctab.
modify tctab.
endloop.
Best regards,
Prashant -
How to handle table controls in BDC
Hi All,
Can u please help me out in my BDC program which involves header data and the item data which is to be filled in a Table Control of a particular transaction .If anyone can send me already existing code it would be of great help..
Thanks in Advance
KishoreHi Kishore
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
regards
SAmeer -
How can we handle table control in BDC?
Hi,
How can we handle table control in BDC?
regards
eswarhi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
ex:
*& Report ZSR_BDC_TBCTRL
REPORT ZSR_BDC_TBCTRL
NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
SPRAS LIKE LFA1-SPRAS,
BANKS(6) TYPE C,
BANKL(17) TYPE C,
BANKN(19) TYPE C,
END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
BANKS LIKE LFBK-BANKS,
END OF BANKS,
BEGIN OF BANKL OCCURS 0,
BANKL LIKE LFBK-BANKL,
END OF BANKL,
BEGIN OF BANKN OCCURS 0,
BANKN LIKE LFBK-BANKN,
END OF BANKN.
DATA : FLD(20) TYPE C,
CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'Z:\sr.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
REFRESH BDCDATA.
REFRESH : BANKS,BANKL,BANKN..
SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
IT_VEN-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
IT_VEN-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
IT_VEN-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
IT_VEN-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
IT_VEN-LAND1.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
IT_VEN-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
'10020030'.
*perform bdc_field using 'LFBK-BANKL(02)'
'67270003'.
*perform bdc_field using 'LFBK-BANKN(01)'
'12345'.
*perform bdc_field using 'LFBK-BANKN(02)'
'66666'.
MOVE 1 TO CNT.
LOOP AT BANKS.
CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKS-BANKS.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKL.
CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKL-BANKL.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKN.
CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKN-BANKN.
CNT = CNT + 1.
ENDLOOP.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.
Maybe you are looking for
-
% Excise Duty is coming wrong in Report
Hi, I have a report of Gross Margin (FI).... My problem is that when i m picking the % Excise Duty from J_1IEXCTAX table against the Chapter ID....it is showing the 4 values against it...means 4 time % Excise Duty....i.e. periodic changed... like....
-
My iphone 4 is not syncing the music from my itunes library.
I tried to restore the iphone and everything else has been backed up, but the music is not syncing. I have the "automatically sync" option checked, and have unchecked the "manually manage music and videos" option unchecked. (due to prior suggestions.
-
USR0013 - DeskI BO XI 3.1 Client Login
I am unable to Login to DeskI in BO XI 3.1 using BO XI 3.1 Client on a Windows XP machine. Attempt-1: System: Server_Name:6400 Authentication: Enterprise Error Message: Cannot acces the repository, (USR0013) Details: [repo_proxy 13] SessionFacade::op
-
I have a subscription to Acrobat standard, How to reload ?
Hello, I currently have a subscription to Acrobat Standard which I need to reload on my system. I cannot find any instructions on how to do this, nor can I find a download location not linked to purchase. Help. Thanks Sean
-
MRP - scheduled at the back ground???
hii Can somebody explain me how to set MRP to be scheduled at the back ground. I have to create New MRP controller and do the MRP scedule at background for the same. Step by steps activities for this and if any ABAPer help we have to get , mention th