Modifying workflow error message

Dear all,
i have a requirement where i need to modify the workflow error and i need to enter additional information like customer number and customer purchase order number in workflow error message and error description during inbound Idoc processing.
can anybody explain me how it can be achieved?
thanking you in anticipation
Ashvin Patel
Edited by: Ashvin Patel on Dec 25, 2008 8:09 AM

Dear Krupa,
Thnx for the reply, but can you pls elaborate it. as i need to write a FS for this but i don't know how to put this in technical terms.
Regards
Ashvin Patel

Similar Messages

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • Modify the errors messages

    Plz tell me could I modify the error messages file from English into National Language.
    (Such as modify the hotkey use Oracle Terminal)

    hello,
    there should be message files for all supported languages shipped with the product. at installation-time, the installer copies only the files correspoding to the current NLS-LANG settings (which are -on NT- derrived from the machine environment at initial installation time). if you want to add additional files, you simply set your NLS-LANG to the required language and install the LANGUAGE SUPPLEMENT for the product CD.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

    I am modifying a BRF Expression used to calculate approval levels.  During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
    I have tried raising the following exceptions:
    /sapsrm/CX_WF_RULE_ERROR.
    /sapsrm/CX_WF_RULE_ABORT.
    Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
    I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
    Anybody raise error messages back to the online user from Process-Controlled Workflow?
    Thanks,
    - Tim

    >
    Saravanan Dharmaraj wrote:
    > Hi Tim,
    >
    >    I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
    >
    >
    > Best Regards,
    > Saravanan Dharmaraj.
    Hi Saravanan,
    I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland.  It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
    In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions.   However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
    Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
    I realize that I can recode the Agent Determination BADIs,  BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI.  I mentioned this in my original posting as well.
    Anyway, any help is appreciated.
    Thanks,
    - Tim

  • Read workflow error message

    Hi experts,
    I want to retrieve the error message for workflows. I want the message to be the one I see on SWI2_FREQ log. I need the last message from the last task it was able to perform.
    Is there a function module / BAPI, .. to do this?
    Regards,
    Philippe
    Edited by: Philippe Haesaert on Mar 7, 2012 11:41 AM

    HI
    Check 
    CALL FUNCTION 'SAP_WAPI_WORKITEMS_BY_FREQUENC'
              EXPORTING
                                   time                     = ls_time
                   selection_status_variant = 0000
                   text                     = 'X'
              TABLES
                   workitem_type_filter     = lt_type_filter
                   task_filter              = lt_task_filter
                                  worklist                 = lt_worklist
                                  worklist_compact         = lt_worklist_compact.

  • Modify Application: Error Message:: Object Variable or With Block variable

    Hi Experts,
    We just installed 5.1 on our server and once the application is installed.
    When I try to modify the aplication I get this error at the end
    This is step what the modify app does:
    Check environment information
    Drop Fact table index.
    Modify fact table.
    Update application information.
    Set Fact table index.
    Create stored procedures and comment table.
    Increase application version and make legal consolidation table.
    Make OLAP database and Journal/Audit reports. / Validate dimension formulas.
    Error Message:: Object Variable or With Block variable
    Any one has any any answer ? I will appreciate your help on this.
    Thanks

    Please check if Reporting Services is working properly.
    Just open IE and type http://nameofserver/reports
    If you receive any error then you have to fix that error verifying configuration of RS.
    If RS is working make sure you add the right information into Server Manager Server Option for RS and Report Server virtual directory.
    Also please check the tblappsetinfo to have all the fields completed (regarding servers).
    Regards
    Sorin Radulescu

  • Workflow error message

    Hi all,
    I need your help, I have a Workflow Task (WS) which is generating the following error message which arrives to my inbox and I don't know what the issue is:
    The error is:
    Error in event receiver    
    Created                  WF-BATCH
    on   11/30/2006   21:14:58
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS20000075
    Following error occurred:
    OL 365
    ReleaseCode
    Message text:
    Mandatory import element 'ReleaseCode' missing
    Event container contains following data:
    CD_CHANGENR                     000000010C0208258815
    CD_OBJECTCLAS                   000000015CEINKBELEG
    CD_OBJECTID                     000000090C4300268881
    EVTCREATION_DATE              000000008D20061130
    EVTCREATION_TIME              000000006T211458
    EVTCREATOR                    000000014CUSG024821
    EVTLANGUAGE                   000000001CE
    EVTNAME                       000000032CRELEASESTEPCREATED
    EVTOBJECT                     000000090oPRDCLNT100BUS2012   4300268881
    EVTOBJKEY                     000000070C4300268881
    EVTOBJTYPE                    000000010CBUS2012
    EVTRECEIVER_ID                000000090C
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM).
    Do you have any ideas of what may the problem be?
    Thanks!!
    AP

    Hi,
    I am having a similar problem.  I have a release group with 3 release codes.  Each release code is for another level of approval.
    When I create the PO, I get the workflow for the first release, but also the message in my inbox:
    'Error in event receiver'
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS20000075
    Following error occurred:
    WL 006
    Message text:
    The mandatory input parameters of the workflow must be set
    Any help on this is appreciated.
    Thanks.
    JP

  • Modify the error message in the substitution status section

    Hi,
    we have requirement to customize the error message(if any) displayed while assigning the alternative supervisor in the Manage Substitution rules section.
    The error message is displayed in the hyperlink substitution status. After we click on the hyperlink error message is displayed
    if possible, please let us know BAPI name which returns the error message from R/3
    Thanks
    vijay

    Hi,
    You can put Stack Trace as to what BAPI's are getting called while navigating in Portal:
    To do so in R/3 Navigate to T.code ST05 and enable RFC Trace and also Activate Trace with Filter and you can set the trace for that user.
    After you do the tasks on Portal, Deactivate Trace and Display Trace which will show you all the BAPI's which were called.
    Hope this helps.
    Cheers-
    Pramod

  • How to modify warning/error messages in DM

    Hi,
    in most of the DM packages a pop-up is generated stating one should enter more variables or something in case one did not enter any selections for any of the dimensions (for example in a copy of move package ...). Does anyone has an idea, where this pop-up is generated, how we can change it or how we can create our own pop-ups ... I'm just curious for this, since it can add value for data packages ...
    D

    Selection windows can be modify into DM using Organize package list - modify package - see the package script.
    There you can use prompt command for selection windows (select dimensiones etc...).
    Warning or errors popus windows can not be controlled or changed.,
    These are implemented into client side and you don't have any option to configure its.
    I hope this will help.
    Regards
    Sorin Radulescu

  • Workflow: Error Message: OL 826: Object does not exist.

    Hi,
    We are in 4.6C version and I'm using the business object DATESPECS. I have developed a custom object with supertype of the standard.
    The error is coming when I test the businees object in transaction SWO1. I need to know how to assembly the object key for raise the event from a customer program with function module SWE_EVENT_CREATE.
    I really need some help with this issue... thanks in advance.
    Best regards,
    Mayra.

    Hi,
    In your program take a variable say lv_key of type SWO_TYPEID.
    Use concatenate statement and concatenate all the fields i.e.<i>Personnel no,
    Subtype, Object ID, lock indicator , to, from</i> and <i>record number</i> values in this variable <b>lv_key</b>.
    Then you can use this key in FM SWE_EVENT_CREATE.
    Hope it helps.
    Regards,
    Akshay
    Note : If FM SAP_WAPI_EVENT_CREATE is available in your system , pls use the same instead of SWE_EVENT_CREATE

  • EVS Error Message Customization

    Hi,
    i am using EVS. when i entered something in input box and clik on the next button then if the string does not match the enumeration then this error message is displayed.
    <b>String "XXXXXX" does not match the enumeration</b>
    is there any way to modify this error message.

    Hi Bunny,
    this is the generic validation error message given by the Data Dictionary Runtime. You cannot modify this error message with a custom error message unless you deactivate the generic validation with a non-validating action. But then you must implement the complete type validation on your own, only for displaying another validation error message. I do not recommend this approach. Why does the generic message not fulfill your requirements.
    Regards, Bertram
    Message was edited by: Bertram Ganz
    Valery gave the same answer on this issue
    Checking date format

  • Infopath 2013 generic error message that displays

    In an InfoPath 2013 custom form that I created, I have several columns that are required. If the user does not enter all the data that is required, the automatic generic error message is displayed.
    I would prefer to make the error message that is more 'user friendly'. Thus can you tell me if there is a way to make the error message more user friendly? If so, would you tell me how to make the message more user friendly?
    The generic error message that is automatically displayed is:
    'InfoPath cannot submit the form because it contains errors. Errors are marked with either a red asterisk (required fields) or a red, dashed border (invalid values). use ctl+shift+O to go to the next error. Use ctl+shift+I to view error details'.
    Thus can you show me how to make this error message more user friendly in InfoPath 2013?

    Hi Wendy,
    All the error messages for the InfoPath form errors are stored in the intlcorestrings.js file which is located in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\INC.
    If you want to modify the error messages, then you can modify that file to change the corresponding error message.
    Per my knowledge, the error you want to customize is IntlCoreStrings.k_strSubmitBeforeErrors and IntlCoreStrings.k_strSaveSubmitErrorInformation.
    You can change the two lines.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Jquery dialog for Error messages??

    Since APEX 4.x now has jquery as a built-in feature, has anyone toyed with modifying the error message out functionality to be through a jquery dialog versus the standard template driven locations?
    Thank you,
    Tony Miller
    Webster, TX
    There are two kinds of pedestrians -- the quick and the dead.

    Hi,
    As I understand there is not much new on that area.
    Roels blog post is still probably valid
    http://roelhartman.blogspot.com/2009/09/transform-ora-xxxx-messages-into.html
    Regards,
    Jari

  • Error Message when saving the workflow in SWDD.

    I have raised this question before in the forum, but I still don't have answer.
    When I try to save the modified workflow or activate it, I have the error message like:
    Message Type X,
    The current application triggered a termination with a short dump.
    Analyse des erreurs
    Short text of error message:
    Control Framework : erreur when a control release !
    Technical information about the message:
    Message classe...... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Does anyone have some clue on that??

    This is from the long text for this message:
    Control Framework : Error processing control
    Diagnosis
    An error occurred when the system tried to process the commands from the Automation Queue on the presentation server.
    There are several possible reasons for this:
    - The installation of the SAP GUI on the presentation server is faulty or obsolete.
    - There is an error in the application program
    - There is an error in the SAPGUI or an integrated control
    Procedure
    1. Make sure that you have imported the appropriate Support Package, the current kernel, and GUI patch for the release of your system
    2. Check whether the error occurs locally on one or a few PCs, or generally on all PCs. Note whether the error only occurs for some users, for example because of a specific Customizing setting.
    If it only occurs locally, this suggests an installation problem with the PC. Check the installation; if necessary, reinstall the software. In the dump, search for the SY-MSGLI field, since it may point to the cause of the error.
    3. Activate the Automation Trace (in accordance with SAP Note 158985).
    4.Start the transaction and continue until the screen immediately before the dump.
    5. From the System -> Utilities menu, choose Autom. Queue, Synchronous Processing.
    The status bar of the GUI displays the text:
       "Automation synchron flush mode on"
    6. If you now proceed with the application, the short dump will display the ABAP call that caused the error; the Automation Trace will contain the error on the presentation server.
    7. If necessary, load the short dump and trace files on to sapservX, so that SAP can analyze them.
    There are plenty of options stated in this message which could cause the problem, I suggest you start with those.
    Kind regards, Rob Dielemans

  • Error message with iPhoto Workflow

    I have designed a workflow that detects TIF files that were modified within a certain timeframe (i.e. today), checks to see if they have a label, and if not will import them into iPhoto and then assigns a label designated "Imported into iPhoto." It is my way of synching Adobe Bridge with iPhoto. I create the file in Bridge, then import it into iPhoto. It seems to be working except I get an error message "iPhoto got an error: Can't make <<class imal>> into type reference. (-1700)."
    The message doesn't seem to affect the workflow but I've had Automator workflows completely corrupt my iPhoto libraries in the past. Does anyone know what is going on with this error?

    I'm getting the same error message, but in my case it is causing subsequent actions not to run. My workflow has the option checked to "delete source images after importing them", and that command does not run when the error message is encountered. I tried adding two actions after this one to get the specified items and then move them to the trash, but again no luck. When Automator encounters the iPhoto error message, the workflow is completely haulted. The photos are brought into iPhoto just fine, but everything that is supposed to happen after that fails.
    Bryan

Maybe you are looking for