Workflow error message

Hi all,
I need your help, I have a Workflow Task (WS) which is generating the following error message which arrives to my inbox and I don't know what the issue is:
The error is:
Error in event receiver    
Created                  WF-BATCH
on   11/30/2006   21:14:58
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
OL 365
ReleaseCode
Message text:
Mandatory import element 'ReleaseCode' missing
Event container contains following data:
CD_CHANGENR                     000000010C0208258815
CD_OBJECTCLAS                   000000015CEINKBELEG
CD_OBJECTID                     000000090C4300268881
EVTCREATION_DATE              000000008D20061130
EVTCREATION_TIME              000000006T211458
EVTCREATOR                    000000014CUSG024821
EVTLANGUAGE                   000000001CE
EVTNAME                       000000032CRELEASESTEPCREATED
EVTOBJECT                     000000090oPRDCLNT100BUS2012   4300268881
EVTOBJKEY                     000000070C4300268881
EVTOBJTYPE                    000000010CBUS2012
EVTRECEIVER_ID                000000090C
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).
Do you have any ideas of what may the problem be?
Thanks!!
AP

Hi,
I am having a similar problem.  I have a release group with 3 release codes.  Each release code is for another level of approval.
When I create the PO, I get the workflow for the first release, but also the message in my inbox:
'Error in event receiver'
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
WL 006
Message text:
The mandatory input parameters of the workflow must be set
Any help on this is appreciated.
Thanks.
JP

Similar Messages

  • Workflow Error Message: System Account - The Workflow could not set Content Approval Status

    This is the first time I try an approval workflow. I am using a template in MS Word and assigned an approval workflow to it. The approval workflow is only going to one person in this case.
    When I start the work flow the following 3 error messages show up:
    Workflow Error Message: System Account - The Workflow could not set Content Approval Status. Enable content moderation for this list and run the workflow again.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the e-mail has a valid recipient.
    Workflow Error Message: System Account - The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Thank you for your kind guidance.

    Hi,
    For the first error: Did you set Content Approval in the workflow?  If so, see if you have it in the versioning settings of the list settings.
    For the second error: double check your recipient is set up as being valid.  Did you type in the email address or is it referring to a people picker field?  also, make sure that in the workflow for the email that you actually populated it in the
    To: field.
    for the third error: I suspect that either your farm is not configured for email.  Or, this error is a knock on from the second error.  If you get the second error rectified it may clear this error.  If not then double check the email settings
    for your farm.
    Johnathan Lightfoot

  • Modifying workflow error message

    Dear all,
    i have a requirement where i need to modify the workflow error and i need to enter additional information like customer number and customer purchase order number in workflow error message and error description during inbound Idoc processing.
    can anybody explain me how it can be achieved?
    thanking you in anticipation
    Ashvin Patel
    Edited by: Ashvin Patel on Dec 25, 2008 8:09 AM

    Dear Krupa,
    Thnx for the reply, but can you pls elaborate it. as i need to write a FS for this but i don't know how to put this in technical terms.
    Regards
    Ashvin Patel

  • SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

    I am modifying a BRF Expression used to calculate approval levels.  During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
    I have tried raising the following exceptions:
    /sapsrm/CX_WF_RULE_ERROR.
    /sapsrm/CX_WF_RULE_ABORT.
    Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
    I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
    Anybody raise error messages back to the online user from Process-Controlled Workflow?
    Thanks,
    - Tim

    >
    Saravanan Dharmaraj wrote:
    > Hi Tim,
    >
    >    I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
    >
    >
    > Best Regards,
    > Saravanan Dharmaraj.
    Hi Saravanan,
    I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland.  It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
    In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions.   However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
    Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
    I realize that I can recode the Agent Determination BADIs,  BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI.  I mentioned this in my original posting as well.
    Anyway, any help is appreciated.
    Thanks,
    - Tim

  • Read workflow error message

    Hi experts,
    I want to retrieve the error message for workflows. I want the message to be the one I see on SWI2_FREQ log. I need the last message from the last task it was able to perform.
    Is there a function module / BAPI, .. to do this?
    Regards,
    Philippe
    Edited by: Philippe Haesaert on Mar 7, 2012 11:41 AM

    HI
    Check 
    CALL FUNCTION 'SAP_WAPI_WORKITEMS_BY_FREQUENC'
              EXPORTING
                                   time                     = ls_time
                   selection_status_variant = 0000
                   text                     = 'X'
              TABLES
                   workitem_type_filter     = lt_type_filter
                   task_filter              = lt_task_filter
                                  worklist                 = lt_worklist
                                  worklist_compact         = lt_worklist_compact.

  • Workflow: Error Message: OL 826: Object does not exist.

    Hi,
    We are in 4.6C version and I'm using the business object DATESPECS. I have developed a custom object with supertype of the standard.
    The error is coming when I test the businees object in transaction SWO1. I need to know how to assembly the object key for raise the event from a customer program with function module SWE_EVENT_CREATE.
    I really need some help with this issue... thanks in advance.
    Best regards,
    Mayra.

    Hi,
    In your program take a variable say lv_key of type SWO_TYPEID.
    Use concatenate statement and concatenate all the fields i.e.<i>Personnel no,
    Subtype, Object ID, lock indicator , to, from</i> and <i>record number</i> values in this variable <b>lv_key</b>.
    Then you can use this key in FM SWE_EVENT_CREATE.
    Hope it helps.
    Regards,
    Akshay
    Note : If FM SAP_WAPI_EVENT_CREATE is available in your system , pls use the same instead of SWE_EVENT_CREATE

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • How to show a custom error message in Workflows

    Hi
    I am working on an already developed Z copy of BO FIPP.
    The requirement is to make a customer specific validation on Profit centers which should be checked just before posting the document.
    I am aware of the POST method in FIPP that uses Function Module -  PRELIMINARY_POSTING_POST_ALL to make sure that everything is fine and captures the errors as well if any. - But it captures only standard SAP errors.
    How can I use this FM to capture my custom errors as well.
    Or is there any way to achieve this.
    Kindly advise.
    Thanks,
    Arash.

    Hi Nabheet,
    Thanks for your response.
    The FM returns the error messages if they are standard ones. For example, if the posting period is closed - the FM will not allow the Workflow to proceed further.
    But in this case, I have a custom error - for a particular Profit center, Cost center and I/O fields are mandatory(not at time of parking, but should be filled before posting).
    Since this is not a standard error, this FM will not stop workflow from proceeding further. How can I have the custom error captured in this FM?
    Thanks.

  • Automator Workflow Fails with Cryptic Error Message

    I'm updating an Automator workflow for OS X Lion that I initally developed and used, without issue, in OS X Tiger. The workflow asks for a name, creates a folder for the name, takes a digital image with a Nikon D50 connected to the computer, and saves the image to the new folder. This aspect of the workflow works fine.
    I then have a prompt asking if we should take another. If the user says "yes," the script should take another image and save it to the folder. This is where I run into an issue. When I attempt to add another "Take a Picture Action" into the workflow, I get the cryptic (at least to me) error message in the attached screenshot.
    Here's the text:
    "Cannot update for observer <AMWorkflow 0x400458ac0> for the key path "parameters.name" from <TakePicture 0x403e3b0a0>, most likely because the value for the key "parameters" has changed without an appropriate KVO notification being sent. Check the KVO-compliance of the TakePicture class."
    The language of this error would seem to indicate a bug. Any thoughts on a fix or the means to report to Apple?

    The subject of this post is a bit misleading. The workflow wasn't failing while I was running it, but rather when I was editing it and trying to include another 'Take a Picture' action in the same workflow.
    The workaround I found was to use a 'Loop' action on the 'Take a Picture' action. It's a bit more elegant and doesn't require multiple 'Take a Picture' actions in the same workflow.
    Nonetheless, what does this error message mean?

  • Error message while assigning agent to workflow task

    Hi guys,
    I have a serious problem in my workflow definition.
    I can't assign the superior of workflow intiator, I mean that the binding can't be defined automatically when I add the rule 00000168, I have the error message
    "container element ORG_OBJECT does not exist"
    Any help please? How can I create this manually?

    See SAP note 887415.

  • Error Message when saving the workflow in SWDD.

    I have raised this question before in the forum, but I still don't have answer.
    When I try to save the modified workflow or activate it, I have the error message like:
    Message Type X,
    The current application triggered a termination with a short dump.
    Analyse des erreurs
    Short text of error message:
    Control Framework : erreur when a control release !
    Technical information about the message:
    Message classe...... "CNDP"
    Number.............. 006
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Does anyone have some clue on that??

    This is from the long text for this message:
    Control Framework : Error processing control
    Diagnosis
    An error occurred when the system tried to process the commands from the Automation Queue on the presentation server.
    There are several possible reasons for this:
    - The installation of the SAP GUI on the presentation server is faulty or obsolete.
    - There is an error in the application program
    - There is an error in the SAPGUI or an integrated control
    Procedure
    1. Make sure that you have imported the appropriate Support Package, the current kernel, and GUI patch for the release of your system
    2. Check whether the error occurs locally on one or a few PCs, or generally on all PCs. Note whether the error only occurs for some users, for example because of a specific Customizing setting.
    If it only occurs locally, this suggests an installation problem with the PC. Check the installation; if necessary, reinstall the software. In the dump, search for the SY-MSGLI field, since it may point to the cause of the error.
    3. Activate the Automation Trace (in accordance with SAP Note 158985).
    4.Start the transaction and continue until the screen immediately before the dump.
    5. From the System -> Utilities menu, choose Autom. Queue, Synchronous Processing.
    The status bar of the GUI displays the text:
       "Automation synchron flush mode on"
    6. If you now proceed with the application, the short dump will display the ABAP call that caused the error; the Automation Trace will contain the error on the presentation server.
    7. If necessary, load the short dump and trace files on to sapservX, so that SAP can analyze them.
    There are plenty of options stated in this message which could cause the problem, I suggest you start with those.
    Kind regards, Rob Dielemans

  • Anyone get this error message when trying to use a pre-installed workflow?

    When I try to use one of several workflows under Photo in Automator I get this error message:
    * -[NSNull length]: unrecognized selector sent to instance 0xa00dc008
    The workflows affected are those with the small feather appearing icon next to it. Don't know which application it refers to. For example: Convert to Profile, Change resolution, Assign Color Profile, Color balance.
    Are these referring to some application that I don't have installed? 'Tis a puzzlement.
    OT

    I think I've found the solution. The workflows that were not working were for Photoshop. Now they are. The fix must have been the 10.5.2 Combo updater as that's the only change I've made that would affect Automator. My PS CS3 installation has not been touched since before the problem started.

  • Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

    Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

    Maybe it's set as a login item:
    - System Preferences: Users and Groups:
    - Highlight your user account in the left pane/list
    - Click "Login" tab at the top.
    See if you have an Automater action on the list
    - Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

  • Workflow notification delegated to the originator contains an error message in notification content

    Hi All,
    We are using a workflow for managing User Access Request(to get new responsibilities) where approval hierarchy is set via AME rules.
    Facing an issue, when approver has set a vacation rule and to whom the notification delegated happens to be the requester itself.
    Notification contains an error message which says like: "Automatic route to <use name> failed. encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.reassign"
    However notification correctly displays its content and also the validation logic that we have put in post notification function while responding to notification is working correctly .
    Also If the vacation rule is set to some user other than requester, issue does not appear.
    Please guide if faced similar issue or any idea to overcome this.
    Thanks in advance!!
    Indu

    I r-clicked on the error message of the details "Request IDoc : Application document not posted" and selected "Idoc maint in OLTP" and then I saw the error message in the log.
    I see that my systems are off a couple minutes.
    Should I just reboot these sys's?
    DataSource 0TCTIOBJNM_TEXT has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 0TCTIOBJNM_TEXT does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 10/31/2007 11:54:29.
    The time stamp in the BW system is 10/31/2007 11:52:10.
    System Response
    The load process has been terminated.
    Procedure
    Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.

  • R11:RECEIVED ERROR MESSAGES FOR AP INVOICE APPROVAL IN ORACLE WORKFLOW

    Hi All,
    We have this error:
    ### Detailed Problem Statement ###
    Received the following error messages in sysadmin notifications:
    Event Error Name: 100
    Event Error Message: ORA-01403: no data found
    Event Error Stack: HZ_DQM_SYNC>REALTIME_SYNCH(oracle.apps.ar.hz.DQM.realtimesync,
    30665979B704AE043C0A81404B04A)
    Event Error Name: WFE_DISPATCH_RULE_ERR
    Event Error Message: [WFE_DISPATCH_RULE_ERR] ENAME=oracle.apps.ap.payment EKEY=10001
    RULE=ap_payment_event_wf_pfg.rule_function SQLCODE=100 SQLERRM=ORA-01403: no
    data found
    Event Error Stack: WF_Event.dispatch_internal()
    In addition, during the set-up of Oracle Approvals Management, there was no available list of
    values in the Notification Style in the workflow configurator page.
    Action Plan
    =======
    1) Confirm if the workflow is customized in any way.
    2) Confirm whether you are able to select global preferences for the other invoices approval, meaning are you
    getting the list of values for the other invoices.
    There are no workflow customizations. We are trying to implement it to AP invoice
    approval only.
    Can you instruct me on how to test this one? I thought I could only select the global preferences from the workflow configuration window. And there are no distinction as to which invoice approval
    process it is applicable. Where could I select the global preferences for other
    invoices approval?
    Thanks a lot

    thanks hussein , but still we can not see LOV values even if we inserted data manually...:(
    But it has improved and we moved on to another error which is:
    *****received the error message:3120: Activity 'APINV/52822' has no performer
    ### Problem description or inquiry details ###
    Received the following error message:
    Error Message
    3120: Activity 'APINV/52822' has no performer.
    Error Stack
    Wf_Engine_Util.Notification_Send(APINV, 115191_1, 52822, APINV:APINV_MRA) Wf_Engine_Util.Notification(APINV, 115191_1, 52822, RUN)
    Encountered the following:
    No list of values in the notification style field in the global configuration region in the Workflow Configuration Page
    Please note that we could not update the workflow configuration page using the forms because there
    is no list of values to select in the above-mentioned field. We just recently
    changed the workflow administrator role from SYSADMIN to KCAALIM to reduce
    changing of user log-in. We have previously used the sysadmin user log-in to
    access the workflow configuration page. there was still no list of values for
    the notification style. we changed the wf admin role to kcaalim using the sql:
    udpate wf_resources set text = 'KCAALIM' where name like 'WF_ADMIN_ROLE';
    Commit;
    Hence, changing of wf admin role and user log-in (to sysadmin) won't help (just in case you would advise me to do so) since we tried it
    already.
    ### Responsibility and navigational paths to reproduce ###
    1. set-up the AME for ap invoice approval.
    2. test an actual transaction.
    3. when the list is generated, set-up workflow for AP approval.
    when setting up the configuration page, there is no list of values available for the notification style. hence the workflow
    configuration could not be updated.
    4. Run the required programs (i.e., synchronizations)
    5. run the approval workflow from the developer studio page.
    6. review the status from the Status Monitor page.
    7. The error message appears
    8. payables, create a sample invoice.
    9. validate and initiate approval.
    10. review the approval history to find out the required approver. (the approver's name appears with 0 amount of approval)
    11. check the notifications in the required approver's worklist.
    12. there are no notifications sent.
    Text continued in next action...
    **** screen shots availble >http://rapidshare.com/files/176008682/error_-noperformer.doc.html
    Thanks again...

Maybe you are looking for