Module failed IE6 in Windows 7 x64

I have a virtual Internet Explorer 6 running in Windows 7 x64, the application worked good but yesterday Windows display the message IE6.exe is not responding. when i look the event viewer the message said: the application IE6.exe is not responding. the path of module errors C\Windows\SySWoW64\nt0_dll.dll is fail. I find in the another Windows 7 x64.
I try find the nt0_dll.dll in others PC but i can´t find them. please can you help me?

aquí va la traducción, tengo Internet Explorer 6 virtualizado con VMWare Thinapp corriendo sobre Windows 7 x64, la aplicación funcionaba bien pero desde ayer me arroja el error de que el modulo con error esta en la ruta C\Windows\SySWoW64\nt0_dll.dll he buscado este archivo pero no lo encuentro y también lo he buscado en otros PC con Windows 7 x64.
Alguien sabe como puedo resolver esto?

Similar Messages

Windows 7 x64 Pro, desktop GUI fails to display correctly, or crashes, when High RAM load, and even after. HW changed, same issue. Please Help.

Hi Guys,
I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even after getting
the chance to close it, or waiting for it to crash by itself, the PC is still not able to display correctly the GUI, even on other browser/applications as shown in the screenshots.
1st Hardware Config:
Intel Core2Quad Q9450
4x2GB DDR2
MSI P43 motherboard
Ati Radeon x550 video card
Software used, that seemed important for me to mention:
NOD32 v4.2
Comodo Firewall 5.12
Chrome
Screenshot Captor
SpeedFan
Other mentions:
Aero is disabled, because I've considered that it's one of the causes.
So, I've considered that it's a RAM issue or a videocard issue, and I've upgraded to:
Intel Core i7 3770k
4x8GB DDR3
Asus P8Z77V-LX motherboard
Intel GPU integrated in the 3770k CPU
The problem just happened 2 times on this rig also, and the RAM was not even coming close to it's maximum capacity of 31.7GB. It was at ~20GB's.
Also, this is another videocard(Intel's integrated GPU), so we can exclude the videocard from the suspects.
My suspects:
1) some desktop manager bugs, or other similar issue
2) video memory allocation - I'm still suspecting that it can be caused by the amount of RAM dedicated to the videocard, currently, I think that it is at 256MB.
3) some poorly designed components of Chrome/Screenshot Captor - still very questionable since there are enough resources on this system, so there should be no fight over resources. And when the system is barely used there are no issues.
4) Adobe Shockwave Flash - maybe this one????
I have attached a set of 20 screenshots here, these were taken on the 1st configuration of my PC, using Q9450:
http://imgur.com/a/Mc8hI#4
Notice how it distorts the image by duplicating it and showing it in a smaller space, or how does it displays those black rectangles. In those moments, the PC is fully functional(the apps are running the background), without being slowish or something, but
you can hardly control it like that. For example, I've tried to remove the mouse from the USB, and then I've insterted it back, the image was not displayed correctly, but the mouse was recognised instantly and the pointer was controlable.
Same thing still happens on the new configuration. Please advise me.
LE: OS is Windows 7 x64 SP1 Professional and it's Geniune. There is no cracked software on this PC. No games. I've tried to maintain it as clean as possible.

Hi,
First, please be ensured that you have installed the latest drivers and all the updates.
Then check whether this issue will not in
Safe Mode. If it didn’t occurred, I suggest you narrow down the cause in
Clean Boot mode.
In addition, try to create a new profile to see how it works.
Hope this helps.
Vincent Wang
TechNet Community Support

Windows 7 x64 ult. update KB2685813 failed on bootcamp 5.1 (MacBook pro retina late 2013)

Hey,
I have a MacBook Pro late 2013 running Windows 7 x64 ultimate with bootcamp 5.1.5640.
Windows failed to update user mode driver framework 1.11 (KB2685813) several times now.
I did even get stuck during instalation after reboot.
I dont want to risk to lose the windows.
What can I do?
Cheers.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

Hey yeah. not much else to say. The title says it all.
I'm trying to register an OCX file that my video editing application requires to work properly.
I'm using a Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files. Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

I don't know what happened.
My Video Editing software was working fine a few days ago in Windows 7 x64. Tried using it this morning....couldn't load the .mpg video clip. Just stood there looking stupid like it does in the 32-bit version of Windows 7.
I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool". I made a TV recording then used the Video Editor to edit it and it worked fine. Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all. This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

X64 Oracle 11g R2 Install On i7 3770 Windows 7 x64 Enterprise System Fails

x64 Oracle 11gR2 installation on my new Windows 7 x64 Enterprise system fails after the "Desktop/Server Class" screen. I click Next, and then nothing happens. The install app closes and no installation logs are available. I checked the Windows logs and there is nothing obvious.
My new system has an Intel i7 3770 cpu with 32GB of ram. My old system had twin Intel Xeon EM64T cpus with 3GB of ram. Both systems ran Windows 7 x64 Enterprise. x64 Oracle 11gR2 installed and ran fine on the old system, but the old system started making "funny" noises and had to be replaced.
This is my personal system, not a commercial installation. I got Win 7 x64 Enterprise from my community college, which is a Microsoft Partner. I need Oracle for my relational database classes.
The story so far:
1. I downloaded win64_11gR2_database_1of2 and win64_11gR2_database_2of2 and unpacked both of them into a folder named win64_11gR2_database_install, replacing as necessary.
2. I set up a loopback adapter and added the following entry to c:\Windows\System32\drivers\etc\hosts:
10.10.10.10 localhost PaulK-PC # Loopback Adapter for Oracle 11gR2 Install
3. After creating the loopback adapter, I restarted my PC. I can ping the adapter with no problems.
4. I ran c:\Users\PaulK\Downloads\Oracle\win64_11gR2_database_install\database\setup.exe as Administrator.
5. I skipped email notification, since I don't have a support agreement.
6. I select "Create and configure a database".
7. Whether I select Desktop Class or Server Class, when I click Next, the installation app dies.
Page 2-2 of Oracle Database Installation Guide 11g Release 2 (11.2) for Windows E24186-01 states that an x64 installation of Oracle requires an AMD64 or EM64T cpu. Does this mean I need to install the x86 version of Oracle 11gR2, or is there some other problem?
Suggestions?
Thanks.

And Part II:
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: SYSMAN password modified
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: Unlocked SYSMAN account
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isHASInstalled
CONFIG: isHAInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 agentHome: null isCentral: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [E:\app\PaulK\product\11.2.0\dbhome_1]
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME E:\app\PaulK\product\11.2.0\dbhome_1
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file E:\app\PaulK\product\11.2.0\dbhome_1\install\staticports.ini
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: E:\app\PaulK\product\11.2.0\dbhome_1:localhost:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_localhost value: 3938
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_localhost value: 1158
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_localhost value: 5540
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_localhost value: 5520
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for Node: localhost : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: E:\app\PaulK\product\11.2.0\dbhome_1\localhost_orcl\sysman\emd\agntstmp.txt:localhost does not exists.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: E:\app\PaulK\product\11.2.0\dbhome_1\sysman\admin\emdrep\sql\core\latest\admin\admin_submit_dbms_jobs.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: connectDesc : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
     at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at E:\app\PaulK\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
     at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
     at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
     at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
     at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
     at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
     at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
     at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui

Windows Update on Windows 7 (x64) on boot camp fails

Running Windows 7 x64 on Boot Camp and trying to install an "important" update from windows update, but it fails:
Update for Windows 7 for x64-based Systems (KB2506014) - Published: 4/12/2011.
I received error code 80073712 and ran System Update Readiness Tool to no avail. Microsoft recommends repairing Windows from the install disc if using that tool fails, but I'm not willing to go that far just yet.
KB 2506014 title is "Update for the Windows Operating System Loader", so I am wondering if there is something about how Boot Camp is configured that is preventing this from installing.
Has anyone else running Windows 7 x64 on Boot Camp received the same error for this particular update, or been successful in installing it? It is thus far the only windows update that has failed to install for me.

KB 2506014 2011-04-13 (important) http://support.microsoft.com/kb/2506014
Reason description -
http://www.microsoft.com/technet/security/advisory/2506014.mspx
Re-download?
http://www.microsoft.com/downloads/en/details.aspx?FamilyId=348f56f3-eb07-42f4-9 dd2-eadc7251fe34&displaylang=en
Try Search, pasting data from between {} {"windows 7"+KB2506014+fails} into search argument. This shows problems with Norton etc.
You could download "Autoruns" to see drivers etc. that are loaded - good coding 606K - from Sysinternals - Mark Russinovich and Bryce Cogswell. http://technet.microsoft.com/en-us/sysinternals/bb545021
Good for Windows 7, this allows disable of questionable/unwanted drivers
I uninstall bootcamp wireless etc. drivers such as broadcom, bluetooth that I do not use on Mac Pro.
There are some utilities not compatible with Windows 7 which you do not want to use.

I am trying to load the 64 bit version of iTunes on to my PC but it continues to fail. My Pc is running Windows XP x64 edition. The rrror message states I need Window Vista 64 or later. What should I do?

I am trying to load the 64 bit version of iTunes on to my PC but it continues to fail. My Pc is running Windows XP x64 edition. The rrror message states I need Window Vista 64 or later. What should I do?

There is no version of iTunes that truly supports the 64-bit version of Windows XP and never will be. If you search this forum for "XP 64" or do a web search for something like "iTunes Windows XP 64", you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete.
Regards.

IOS: AnyConnect 2.5.3055, Windows 7 x64 fails to connect to Webvpn on 2811

I am attempting to add SSLVPN to my 2811 and 2801 production routers. These devices currently run IOS 12.4(24)T4 ADV SECURITY images. I have succesfully configured the SSL VPN gateway via CCP. I can connect via web browser to https://2811IP/sslvpn, log in, and use the web portal. When I attempt to use the full tunnel AnyConnect client on Windows 7 x64 (I have nothing else to test with right now) I get the simple and vague error: "Connection attempt has failed." This error occurs before I would receive a prompt to provide credentials. It never prompts me. There is no further information such as timeout, certificate error, or anything like that.
running term mon and debug webvpn on the router produces only the following when the client attempts to connect:
002121: Oct 23 00:10:35.081: WV: sslvpn process rcvd context queue event
002122: Oct 23 00:10:35.085: WV: sslvpn process rcvd context queue event
002123: Oct 23 00:10:38.973: WV: sslvpn process rcvd context queue event
002124: Oct 23 00:10:38.977: WV: sslvpn process rcvd context queue event
002125: Oct 23 00:10:39.041: WV: sslvpn process rcvd context queue event
002126: Oct 23 00:10:39.041: WV: Entering APPL with Context: 0x47FE4C90,
Data buffer(buffer: 0x4732ABC0, data: 0x3F5BE498, len: 172,
offset: 0, domain: 0)
002127: Oct 23 00:10:39.041: WV: http request: /sslvpn with no cookie
002128: Oct 23 00:10:39.041: WV: Client side Chunk data written..
buffer=0x4732AA20 total_len=188 bytes=188 tcb=0x481CF0A8
I've tried adding a program exception for anyconnect to the windows firewall.
I've tried disabling the windows firewall.
I've tried connecting via different ISPs, both wired and cellular.
I've tried the previous release of AnyConnect for Windows.
The TP certificate on the device is self-signed and valid from 1/23/2006 to 12/31/2019. I am prompted to accept the cert when I client Select (Connect) in the client. After I click Accept on the certificate window the connection fails. If I wait a while (perhaps a minute) the following error pops up, but ONLY if I wait a while before clicking Accept:
"AnyConnect cannot confirm it is connected to your secure gateway. The local network may not be trustworthy. Please try another network"
What else can I check?

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

IE 10 Update 2977629 on Windows 7 x64 SP1 repeatedly fails to install.

IE 10 Update 2977629 on Windows 7 x64 SP1 repeatedly fails to install with error code 214794205 "Access is Denied". This update is being run using an administrator account. This is a systemic issue on all domain joined systems, desktops
not in a domain are not affected. I cannot find any guidance on how to fix this, please help!

Hi,
Based on your description, ED's suggestion is available. You could use gpresult command to export the group policy settings to check if there any group policy affect the installation.
About how to use it, please read the guide below:
How to Use the Group Policy Results (GPResult.exe) Command Line Tool
http://technet.microsoft.com/en-us/library/bb456989.aspx
If it's not helpful, please provide the Windows Update installation log in order to analyze it.
You could find it from the following path:
%windir%\Windowsupdate.log
Karen Hu
TechNet Community Support

IPodService Module failed under Windows XP SP3

Greetings. Following the install of Win SP3, my iPodService Module fails.
The error is: iPodService Module has encountered a problem and needs to close.
I’ve tried restarting it, and that didn’t work.
I'm running the latest version of Itunes. Have tried reinstalling and it still fails. Symantec’s site says the registry was affected during the SP3 install and has an EXE file to fix. That didn’t work.
I’ve noticed others having this problem but have not seen and easy fix. One guy went and cleaned up his registry. I don’t think I should have to do that.
Has anybody found a fix for this?
Thank you,
Steve

I’ve noticed others having this problem but have not seen and easy fix. One guy went and cleaned up his registry. I don’t think I should have to do that.
If you Device Manager is currently still blank, and the Symantec fix did not work for you, then that may be your best option for getting the iPod syncing again.
For the manual registry-editing technique, see the following Microsoft document:
Device Manager and Network Connections may be blank after you install Windows XP Service Pack 3
(If you can get your Device Manager displaying properly, the iPod Service Module crash should also go away.)

QuickTime 7.1 Failed to install on Windows XP X64

Just tried to install the latest version of QuickTime on my system. The install failed on QuickTime, now it all screwed up and corrupted. Wondered if this was tested in Windows XP X64 systems? Any suggestions on getting this fix, it doesn't work at all. I tried to uninstall, but it no longer in the Add and remove list.
JB
AMD Dual Core +4400 Windows XP Pro Windows X64

This is based on Windows XP Professional X64.
1. Click on Start Button
2. Select Settings --> Control Panel
3. Double Click Add Remove Programs.
4. Once open, it might not show the Patches, check the box that says "Show Updates". It just left of the "Sort By" Name, Date, etc.
5. Find Patch number KB908531 and uninstall it.
6. Run the 7.1 install again and see if that works.
7. Windows detected that that patch was missing and downloaded it again to be installed. For now I left the patch in the queue to install later.
I see some people are rolling back to an older version of Quicktime, until this issue is fixed. Getting the older version might be a pain.
JB
Dual Core 2.7 Ghz PowerPC G5 Mac OS X (10.4.6) AMD Dual Core 2.2 Ghz Windows Professional X64

SQL Developer on Windows 2003 x64 Edition "failed to initialize..."

I am trying to run sqldeveloper on Windows server 2003 x64 and I get the following error:
The application failed to initialize properly (0xc0000018). Click on OK to terminate the application.
I get this error with the version with jre, and with the version without the jre.
I have Java 1.6 installed on that server (applet shows up under x86 control panels)
I can reproduce this on two different win 2003 x64 servers, but it works fine on a windows 2003 standard (32 bit)
Any idea how to fix this?
thanks.

This might not be the right place to post this question, but will give it a shot . . .
I've installed JDK 1.5 and downloaded/unzipped SQL Developer on my Windows 2003 x64 server, then launched sqldevelper.bat from the advice given above -- but I get an error saying:
'java' is not recognized as an internal or external command,operable program or batch file.
I made sure I have java installed:
C:\Program Files (x86)\Java>dir
Volume in drive C has no label.
Volume Serial Number is A86A-1831
Directory of C:\Program Files (x86)\Java
03/29/2007 07:29 PM <DIR> .
03/29/2007 07:29 PM <DIR> ..
03/26/2007 06:01 PM <DIR> j2re1.4.2_12
03/29/2007 07:24 PM <DIR> jdk1.5.0_05
03/29/2007 07:25 PM <DIR> jre1.5.0_05
03/29/2007 07:29 PM <DIR> jre1.5.0_11
What am I doing wrong, that would cause 'java' is not recognized as an internal or external command,operable program or batch file?

Windows 7 x64, switchable graphics - often fails (close 3D apps). How to find out reason

I have Windows 7 x64 along with the latest end/2010 ati/intel switchable video driver.
Whilst switchable graphics usually works great after login, it rarely takes long before I'm in a state where the switch will fail - reporting an error that I need to close 3D apps etc.
Even if I close all apps (and check running processes+kill) I still cannot switch, though if I log off/on things are usually back to normal.
How can I find out the reason WHY (exactly the switch fails.
Is this logged anywhere
Can I enable trace
Are there known defects in this area

Hi ozDerek,
Thank you for visiting the HP Support Forums. Since this is a duplicate post I'm going to lock this one, please check your other post here for replies:
IDT HD Audio stuttering 3d apps/games/tf2 - Windows 7 x64
Thanks!
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

Workgroup Installing Client Fails (Build and Capture) - Windows 7 x64

Hi, I'm trying to configure a Build and Capture TS for Windows 7 x64 but the client always fails to find my site during installation, which means I can't install updates and applications. I'm running SCCM 2012 SP1 and the ConfigMgr2012-SP1-KB2801987-X64-ENU
hotfix has already been installed.
I'm using the SMSMP=XX.XX (and SMSSITECODE=XXX) options but the log always says "No MPs were specified from commandline..."
I've done a huge amount of searching and it seems like it should be possible to end up with a client installed on a workgroup computer with the correct side code (and displaying "Currently Internet"), which should allow updates to be installed
during the TS, but I can't get it to work! Any help would be greatly appreciated.
Here's part of my ccmsetup.log file :
==========[ ccmsetup started in process 2332 ]========== ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Running on platform X64 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Launch from folder D:\_SMSTaskSequence\OSD\XXX00034\ ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
CcmSetup version: 5.0.7804.1500 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Running on OS (6.1.7600). Service Pack (0.0). SuiteMask = 256. Product Type = 1 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Ccmsetup command line: "D:\_SMSTaskSequence\OSD\XXX00034\ccmsetup.exe" /useronly /source:D:\_SMSTaskSequence\OSD\XXX00034 /config:MobileClient.TCF /status:572 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required. ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Command line: "D:\_SMSTaskSequence\OSD\XXX00034\ccmsetup.exe" /useronly /source:D:\_SMSTaskSequence\OSD\XXX00034 /config:MobileClient.TCF /status:572 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Copying config file from D:\_SMSTaskSequence\OSD\XXX00034\MobileClient.TCF to folder D:\WINDOWS\ccmsetup\. Return result: 0x0 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
SslState value: 224 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
CCMHTTPPORT: 80 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
CCMHTTPSPORT: 443 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
CCMHTTPSSTATE: 0 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
CCMHTTPSCERTNAME: ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
FSP: ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
CCMFIRSTCERT: 1 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Config file: D:\WINDOWS\ccmsetup\MobileClientUnicode.tcf ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Retry time: 10 minute(s) ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
MSI log file: D:\WINDOWS\ccmsetup\Logs\client.msi.log ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
MSI properties: INSTALL="ALL" SMSPROVISIONINGMODE="1" SMSSITECODE="XXX" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" CCMFIRSTCERT="1" ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
Source List: ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
D:\_SMSTaskSequence\OSD\XXX00034 ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
MPs: ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
None ccmsetup 6/06/2014 10:58:01 AM 2336 (0x0920)
No version of the client is currently detected. ccmsetup 6/06/2014 10:58:02 AM 2336 (0x0920)
Updated security on object D:\WINDOWS\ccmsetup\. ccmsetup 6/06/2014 10:58:02 AM 2336 (0x0920)
A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent. ccmsetup 6/06/2014 10:58:02 AM 2336 (0x0920)
Downloading file D:\_SMSTaskSequence\OSD\XXX00034\ccmsetup.exe ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
Downloading D:\_SMSTaskSequence\OSD\XXX00034\ccmsetup.exe to D:\WINDOWS\ccmsetup\ccmsetup.exe ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
File download 17% complete (262144 of 1457840 bytes). ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
File download 35% complete (524288 of 1457840 bytes). ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
File download 53% complete (786432 of 1457840 bytes). ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
File download 71% complete (1048576 of 1457840 bytes). ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
File download 89% complete (1310720 of 1457840 bytes). ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
File download 100% complete (1457840 of 1457840 bytes). ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
Download complete. ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
Running as user "SYSTEM" ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Detected 928475 MB free disk space on system drive. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Checking Write Filter Status. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Unexpected row count (0) retrieved from AD. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Failed to get site version from AD with error 0x80004005 ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
SiteCode: XXX ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
SiteVersion: ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
No MPs were specified from commandline or the mobileclient.tcf. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Downloading file ccmsetup.cab ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Determining source location... ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Found accessible source: D:\_SMSTaskSequence\OSD\XXX00034 ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Found available source D:\_SMSTaskSequence\OSD\XXX00034\ ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Downloading D:\_SMSTaskSequence\OSD\XXX00034\ccmsetup.cab to D:\WINDOWS\ccmsetup\ccmsetup.cab ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
File download 100% complete (9613 of 9613 bytes). ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Download complete. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)

Thanks for the reply. You're right, I'm setting the SMSMP and SMSSITECODE in the command line of the package itself, not the TS properties box. I have tried both ways, in fact every combination I could think of and nothing seems to produce an installed client
which knows its site (and both ways produce almost identical logs, which makes me think the properties are being ignored from either location).
The log doesn't actually contain any error messages which seem relevant at all, but here's some chunks with all of the errors (the log was too big to post in its entirety) :
Download complete. ccmsetup 6/06/2014 10:58:03 AM 2336 (0x0920)
Running as user "SYSTEM" ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Detected 928475 MB free disk space on system drive. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Checking Write Filter Status. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
This is not a supported write filter device. We are not in a write filter maintenance mode. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Unexpected row count (0) retrieved from AD. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Failed to get site version from AD with error 0x80004005 ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
SiteCode: XXX ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
SiteVersion: ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
No MPs were specified from commandline or the mobileclient.tcf. ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Downloading file ccmsetup.cab ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Determining source location... ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Found accessible source: D:\_SMSTaskSequence\OSD\XXX00034 ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Found available source D:\_SMSTaskSequence\OSD\XXX00034\ ccmsetup 6/06/2014 10:58:05 AM 2336 (0x0920)
Discovering whether item 'x64/MicrosoftPolicyPlatformSetup.msi' exists. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Couldn't find a product with MSI upgrade code '{19B9818B-7432-49E9-BC02-B126025EE235}' in the MSI database. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Item x64/MicrosoftPolicyPlatformSetup.msi has not been installed yet. Put to pending install list. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Discovering whether item 'x64/WindowsFirewallConfigurationProvider.msi' exists. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
File 'D:\WINDOWS\ccmsetup\WindowsFirewallConfigurationProvider.msi' does not exist. Discovery failed. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Item x64/WindowsFirewallConfigurationProvider.msi has not been installed yet. Put to pending install list. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Discovering whether item 'i386/Silverlight.exe' exists. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
32-bit Hive selected ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Item i386/Silverlight.exe has not been installed yet. Put to pending install list. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Discovering whether item 'i386/dotNetFx40_Client_x86_x64.exe' exists. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Detected item 'i386/dotNetFx40_Client_x86_x64.exe' ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Discovering whether item 'SCEPInstall.exe' exists. ccmsetup 6/06/2014 10:58:11 AM 2336 (0x0920)
Couldn't determine site version for site 'XXX'. Let client deployment continue. ccmsetup 6/06/2014 10:58:16 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterHostedApplications. Register hosted out-of-proc DCOM applications running inside of Configuration Manager Client. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterEndpointsInit. Gathers information such as log file name on each endpoint to be registered on the system. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterEndpointRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterEndpoint. Registers endpoint gathered in the action CcmRegisterEndpointsInit with WMI. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterSystemTasksInit. Processes the CcmSystemTask table and passes this information to CcmRegisterSystemTask. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterSystemTaskRollback. Rolls back the changes made by CcmRegisterSystemTask. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:01: CcmRegisterSystemTask. Registers a System Task with WMI. ccmsetup 6/06/2014 11:01:01 AM 2336 (0x0920)
MSI: Action 11:01:02: CcmRegisterPerfCounters. Registers performance counters gathered in the CcmRegisterPerfCountersInit action ccmsetup 6/06/2014 11:01:02 AM 2336 (0x0920)
MSI: Action 11:01:02: CcmRegisterComponentsInit. Generates the list of components for CcmRegisterComponets action to register. ccmsetup 6/06/2014 11:01:02 AM 2336 (0x0920)
MSI: Action 11:01:03: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents. ccmsetup 6/06/2014 11:01:03 AM 2336 (0x0920)
MSI: Action 11:01:03: CcmRegisterComponents. Registers components passed in from CcmRegisterComponentsInit ccmsetup 6/06/2014 11:01:03 AM 2336 (0x0920)
MSI: Action 11:01:03: SmsMigrateSwDistHistory. Migrate software distribution history. ccmsetup 6/06/2014 11:01:03 AM 2336 (0x0920)
MSI: Action 11:01:03: CcmInstallUtilInit. Initializing InstallUtil.exe to register .net WMI provider ccmsetup 6/06/2014 11:01:03 AM 2336 (0x0920)
MSI: Action 11:01:04: CcmStopService. Stops the ccmexec service. ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Action 11:01:04: StopServices. Stopping services ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Action 11:01:04: SmsUninstallPrepDrvr. Uninstalling Software Metering PREP Driver ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Warning 25702. Failed to uninstall PrepDrvr.Sys for Software Metering Agent. ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Action 11:01:04: SmsStopUIComponents. This custom action forces all open client UI components to stop and exit. ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Action 11:01:04: SmsStopUserComponents. This custom action forces all open client UI and SCNotification components to stop and exit. ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Action 11:01:04: CcmUnloadWmiProviders. Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them. ccmsetup 6/06/2014 11:01:04 AM 2336 (0x0920)
MSI: Action 11:01:22: CcmRegisterHostedApplicationsRollback. Rollback the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client. ccmsetup 6/06/2014 11:01:22 AM 2336 (0x0920)
MSI: Action 11:01:22: CcmRegisterHostedApplications. Register hosted out-of-proc DCOM applications running inside of Configuration Manager Client. ccmsetup 6/06/2014 11:01:22 AM 2336 (0x0920)
MSI: Action 11:01:22: CcmRegisterEndpointRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint. ccmsetup 6/06/2014 11:01:22 AM 2336 (0x0920)
MSI: Action 11:01:22: CcmRegisterEndpoint. Registers endpoint gathered in the action CcmRegisterEndpointsInit with WMI. ccmsetup 6/06/2014 11:01:22 AM 2336 (0x0920)
MSI: Action 11:01:22: CcmRegisterSystemTaskRollback. Rolls back the changes made by CcmRegisterSystemTask. ccmsetup 6/06/2014 11:01:22 AM 2336 (0x0920)
MSI: Action 11:01:22: CcmRegisterSystemTask. Registers a System Task with WMI. ccmsetup 6/06/2014 11:01:22 AM 2336 (0x0920)
MSI: Action 11:01:26: CcmRegisterPerfCountersRollback. Rolls back any changes made by CcmRegisterPerfCounters if install fails. ccmsetup 6/06/2014 11:01:26 AM 2336 (0x0920)
MSI: Action 11:01:26: CcmRegisterPerfCounters. Registers performance counters gathered in the CcmRegisterPerfCountersInit action ccmsetup 6/06/2014 11:01:26 AM 2336 (0x0920)
MSI: Action 11:01:26: CcmRegisterComponentsRollback. In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents. ccmsetup 6/06/2014 11:01:26 AM 2336 (0x0920)
MSI: Action 11:01:26: CcmRegisterComponents. Registers components passed in from CcmRegisterComponentsInit ccmsetup 6/06/2014 11:01:26 AM 2336 (0x0920)
MSI: Action 11:01:26: CcmInstallUtil. Calling InstallUtil.exe to register .net WMI provider ccmsetup 6/06/2014 11:01:26 AM 2336 (0x0920)
MSI: Action 11:01:33: SmsSetLUAAccessPermissions. >Gets permission for evelation on Vista and grants each COM object permission. ccmsetup 6/06/2014 11:01:33 AM 2336 (0x0920)

CHKDSK fails on fresh install of Windows 7 x64 on mid-2009 MBP with SSD

There was an earlier post about this that has been archived prematurely that I will reproduce below. The main issue is a flaw in the Windows 7 x64 CHKDSK of the SSD drive in the mid-2009 MBP= 5,2. With fresh OSX installs, bootcamp 3.1, Windows 7 x64 all updates, the CHKDSK operation checks files at about 1 per second in stage 4 of 5, verifying file data.
Moderators: please leave this open until it is actually resolved.
Earlier posts:
Panajev
Posts: 4
From: ITALY
Registered: Oct 14, 2009
Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Posted: Nov 2, 2009 6:45 AM
Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the "fix" and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
What to do?
Message was edited by: Panajev
MacBook Pro (2009) Mac OS X (10.6.1) Windows 7 x64, Bootcamp 3.0, recent HDD update
nicegom
Posts: 6
Registered: Nov 12, 2009
Re: Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
Posted: Nov 12, 2009 1:40 AM in response to: Panajev
Hi there,
I have a different experience. I installed Windows 7 before the "performance update 1.0" came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
Cheer,
Message was edited by: nicegom
Macbook Air Windows Vista MBA of Mid 2009 with SSD

Windows 7 x64 all updates
Just doublechecking. Does that include the recent chkdsk hotfixes?
[The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

Module failed IE6 in Windows 7 x64

Similar Messages

Maybe you are looking for