Module won't run on IIS

I verified the installation by navigating to the appropriate
folder in the
IIS Manager of the default web site. It's there.
However .. when I try to navigate to
http://localhost/mypanel.mxml
which I
placed in the root, the file isn't found and the browser (I
have tried both
Firefox and IE7) is trying to go to
http://www.localhost.com ..
huh?
I can go to any other of my sites on localhost .. or any
other file in the
main root and it's
http://localhost/nameoffile
and it's found .. but for
some reason, this is trying to add the .com onto localhost
with an mxml file
only.
Why?
Thanks!
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development

Yes .. the page with the links works .. but none of the
samples do. Both
Firefox and IE just hang and time out. When I try to go to
the mxml page
that I have in the root, the status bar shows that it changes
my URL of
http://localhost/mypanel.mxml
to
http://www.localhost.com which
of course
cannot be found.
Yes .. IIS is installed on Port 80. And my localhost works
fine for
everything else.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"catalinanastasoaie" <[email protected]>
wrote in message
news:eto5um$uf$[email protected]..
> Hi,
>
> After the PC rebooted did your default browser opened
displaying a page
> with
> links to the samples that have been installed along with
the Flex Module?
>
> Did any of the samples worked for you?
>
> On which port have you installed IIS? If it is other
than :80 you need to
> type
>
http://localhost:[YOUR_PORT
in order to display the page
> from
> your document root?
>
> Regards,
> Catalin Anastasoaie
>

Similar Messages

Bridge won't run. Should I reinstall it?

1.I went to Windows>Workspace, and "Output" was not there.
2. I read at adobe.com help that I should check for updates and then download the "Output" workspace, then put it at the right extension.
3. I did that.
4. Now Bridge won't start.
It doesn't seem normal that adding a workspace should make this happen. At least I should get an error.

Thanks, station_two.
I'm using Photoshop 14.0 x64
I've downloaded and reinstalled whatever version of Bridge installs currently on CC.
Mac OS X version 10.7.5, 4gigs of memory, 250 free gigs of disk space.
I'm not receiving an error message.
The problem I have is that Bridge won't run. I've uninstalled and reinstalled it, checked all of the updates. The way I'm trying to run it is by clicking on the icon under Launchpad. I tried another method: going into photoshop and clicking "Browse in Bridge," but that's not working. I tried using mini bridge. It says that it is waiting on Bridge, and the Bridge menu bar appears and disappears on a regular interval, and the icon appears and disappears on the same interval on the Dock.
This seems to have started when I tried using the instructions described here Install Adobe Output Module and here How do I navigate to the Application Support folder in Mac OS 10.7 and 10.8? to use the Output method for create a portfolio. I've tried going back and undoing those changes.

HP Pavilion 23t AIO PC won't run Battlefield smoothly

My father bought me the Pavilion 23t AIO, thinking that it would be a good gaming computer, but upon me testing my game Battlefield 3 with the normal graphics and settings, and the game was incredibly laggy. I changed the settings to the lowest, and the game still won't run completely smoothly, and twice it closed itself out on me. I'm wondering if I need a new graphics card or not, please respond quickly!!
This question was solved.
View Solution.

SniperProffesor, welcome to the forum.
The good news is, you have very nice computer. The bad news is, it is not good for gaming. The video card slot is MXM (One PCI Express MXM slot that supports a PCI Express x16 graphics card (Generation 2 speed). Here are the specs on it:
One Mobile PCI Express Module (MXM) socket
MXM 3.0 version: Type A
<35W
It is difficult to find these video cards because they are usually sold as OEM components. Your best bet would be to shop ebay for one. I am not certain that this card would even make your gaming experience better.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Programs won't run after update to 10.6.7

Hi
I have just inherited an early 2008 iMac following my Dad's death a few months ago. So I have no Mac experience at all. On receiving it, I booted it up and a list of recommended software updates appeared which I ran, and by all accounts successfully installed. One of them was an update to 10.6.7
Previous to the update I could access the installed programs. Now I can access barely any of them.
Error message reads:
Application name cannot open.
Check with the developer to ensure this version of application name works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS.
There aren't any further updates needed. Every time I check, I'm advised everything is uptodate. So last night I reinstalled iTunes, downloading the latest version. That won't run. Same error message.
I'm unsure what to do now. I don't have any disks etc at the moment as Mum is still trying to locate them (they had more than one property and this has come out of one that has been boxed up and put onto the market).

This is a typical error report. The section I have bolded out seems to be common in all the errors.
Process:         iTunes [500]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10221201~1
Code Type:       X86 (Native)
Parent Process: launchd [105]
Date/Time:       2011-05-11 06:38:32.490 +0100
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report:          15167 sec
Crashes Since Last Report:           305
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      DCCD367C-006F-4EEF-8457-3885D045DBBE
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox: unknown file type, first eight bytes: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDP725032GLA380, 298.09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000

Lightroom 5.6 won't run on Win 7 6 after upgrade through CC

Upgrading Lightroom to 5.5 stopped it from running. I found a fix on the net and moved on.
Now. Lightroom 5.6 has just upgraded and now it won't run. Also, I cannot find a fix - new or old.
This is very frustating..
Please help

Installing the standalone version just postpones the problem until you install the cloud version, again.
The SLCache folder has bad data in it that confused LR 5.5 and again LR 5.6 until it was cleared, via Solution 4 on this page. Of course there could be other issues, so trying each of the solutions in order could be useful, but Solution 4 is the one that finally worked for me, with LR 5.5 on my home computer, and LR 5.6 on my work computer, where I'd installed the standalone 5.5 to bypass the issue and it came back with LR 5.6:
Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update
Once you remove the contents of the SLCache folder other Adobe programs will ask to be relicensed like Elements via a serial number or the cloud programs by logging in, but that is just once after you clear it not each time.

ITunes 8 won't run on my laptop (running Vista Home Premium)

Help. Upgraded to iTunes 8 two days ago and it doesn't work. I get a message that says iTunes help module has stopped working and then a message that iTunes has experienced an error and must close (after the interim message that Windows is looking for a solution). I've tried reinstalling iTunes 8 twice with same result. It won't run and now I can't even get an older version of iTunes to install (because it says I have a "later" version already on the computer). What gives? It's very frustrating and right now I don't have a working version of iTunes! Apple folks - can you help?

apple.com/iTunes
Click download now and press the same button on the next screen.
The second screen will be the subscribe by email prior to download. Just press the download key to bypass.

BC4J Tester won't run with SunJCE provider enabled in JDev 903

I have a working BC4J project that I can access via the Tester and via code in JDev 903. The Module is deployed in 'Local' mode.
I go into <jdev_home>\jdk\jre\lib\security\java.security and add the following line:
security.provider.3=com.sun.crypto.provider.SunJCE
I can no longer run the BC4J Tester - I get "java.lang.NullPointerException" - that's it - in the log window when I try to run the tester. I can still access the BC4J Module via code, just as before enabling the SunJCE provider, its just the Tester that won't run. My code that uses the SunJCE provider runs fine.
I then comment out the new line in java.security, and the Tester runs fine again. (But, of course, my code that needs the SunJCE provider does not...)
Note that I added this provider as the lowest order provider - the following is how java.security is setup when JDev is installed:
security.provider.1=sun.security.provider.Sun
security.provider.2=com.sun.rsajca.Provider
Any thoughts or ideas?
Thanks,
Jim Stoll
(I need this provider for something else I'm doing which uses both the SunJCE provider and BC4J, independent of each other)

Hi,
Can you create a JClient project to test your application module? I have not found why it failed in Tester when using SunJCE privider, but found that if I create a simple JClient using the same application module, it work.
Thanks,
Yvonne

Aggregator EXE files won't run

Hi,
I'm new to using Captivate and I recently created my first Captivate-based lesson. I have 5 discrete learning modules each with their own multiple-choice quiz, so I decided it would be best to make 5 different projects and then stitch them together using Aggregator. I want to publish both an APP file for Mac users and an EXE file for PC folks. The APP file I create in Aggregator runs just fine, but the EXE file won't run. There are no error messages, it just doesn't do anything when you try to run the file.
Here is what I have tried (without success):
Both XP and Win 7 (won't run on either)
Installing newest version of Flash Player
Running the EXE file as an Admin
Oddly enough, if I publish each of the 5 projects as an EXE separately, they run just fine. My back-up plan is to make the PC users open each of the 5 modules separately, but I'd prefer to avoid this if I can.
Am I doing something wrong in Aggregator? It seems pretty simple and the APP file works...
Thanks for any help!
Jess

Hi Rod,
That was a great idea. Unfortunately, none of the 5 Aggregator EXE files (each with one of the 5 projects missing from it) worked. I double-checked the 5 EXE files that I published individually directly from Captivate (without Aggregator) and all of them work just fine. It's looking like I need to go with plan B and just force my users to return repeatedly to the CD-ROM to open each subsequent module.
I asked a friend to run the Aggregator-created APP file on his Mac and it wouldn't run for him even though it will run for me on my Mac. So I'm thinking I will need to publish each of the 5 projects as separate APP files as well and the Mac and PC folks will be in the same boat.
Thanks,
Jess

10.4.10 update won´t run

I just installed a fresh copy of Tiger in my old G4 400mhz (AGP Graphics) after erasing the hard drive. But when i run the software update, i get an error and the 10.4.10 update won´t run. Even with the 10.4.10 standalone installer, the DMG won´t mount, i get an error and it all ends with a Kernel Panic.
I´ve tried everything i could remember, but no go. Any suggestions?
Thanks

If you have any PCI cards, periphreals, 3rd party RAM modules, or anything else that was added to the computer that was not included straight from Apple, pull it. You may want to reseat your original RAM and AGP card as well. When troubleshooting, you want to make sure that all you have hooked up is the mouse, keyboard and monitor.
After you do a fresh install of the system, does it run fine? Make sure that directly after the install you repair permissions and repair the disk, and then restart. If you think it is running okay, then run software update- and only update the system to 10.4.11, don't install all of the other updates until after. If the system still doesn't upgrade correctly, then maybe you should just stick with plain 10.4. If it works well in 10.4, there may be no reason to upgrade.

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Global data getting reset when running under IIS?

We have a scenario using IIS with an ASP.NET web service written in VB.NET. When a call to the web service is made, the web service calls a native dll (written in C, compiled using VS2010) using platform invoke, which in turn calls into our product API:
VB.NET web service -> native library (p/invoke) -> native API ....
Web service requests are successfully completed and the system runs without problem for hours. A trace of the native API shows it is being called by multiple processes and multiple threads within those processes.
The main native API dll contains a static global variable used to detect whether it is the first time it has been called and run initialization logic if it is. This dll is itself linked to a second dll that contains a global variable used to detect if it is
the first time it has been called.
After some hours the trace shows that the native API is invoked by an existing process but that the initialization logic is being exercised again, even though the global variable was set to indicate not first time and is never reset. One theory was that
the first process has ended and a new process has started almost instantaneously using the same process ID. However this is not the case as existing thread IDs from the same process are seen to write to the trace again after the first time logic has executed
for the second time, indicating the process has not restarted. The problem occurs regularly.
It is as though the process's global data has been initialized again and malloc'ed memory freed while the processing is still running. Is there any way this is possible when running under IIS?
There is an internal thread which waits on a blocking read of a named pipe (via ReadFile), and when the problem occurs, the ReadFile call ends with ERROR_NO_ACCESS, which appears to indicate the malloc'ed buffer is no longer valid, again implying something
has happened to the memory allocated to the process.

Suggestting you asking it on:
http://forums.iis.net/

How to protect an application running on IIS with OAM 11gR2

Hello Gurus,
I have a question regarding protecting an application running on IIS with OAM 11gR2. We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page. These is all solaris. I am protecting other applications like pplsoft moduels with this OHS instance and OAM server. There is another application that I need to protect which is itself running on IIS windows machine. I need guidance as to -
1.) Do I need to install a windows version of webgate to protect this IIS based application?
2.) Or I can still protect and proxy requests from this application to current OHS instance? How can I do this?
3.) Or Do I need to proxy requests directly from IIS to OAM weblogic server?
Please advise to the earliest as this is an urgent issue.
Thanks !!

From your description it is not clear how exactly architecture looks like
We have an OHS server running and all the requests from the users are coming to this OHS server webgate for them to login using the SSO login page.
is this OHS centralized login farm ? (Case 1)
OR is this OHS server (with webgate) acting as virtual web server hosting multiple web sites so that request to any site passes through this OHS/webgate (Case 2)
1.) Do I need to install a windows version of webgate to protect this IIS based application?
If case 1 then you need to install 10g webgate on top of IIS server to protect this application
If case 2 then you can just proxy request from OHS to IIS server. As every request passes through OHS user will be authenticated before request hits IIS
Look at Product documentation for virtual web sites : http://docs.oracle.com/cd/E27559_01/admin.1112/e27239/shared.htm#autoId12
It has steps to protect virtual web sites.
Also you need to make sure no one hits IIIS web sites directly.
Hope this helps

CS3 installs but won't run

Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-N

Rob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is.

How do I install the FM10 licensing fix when Adobe Update Installer won't run?

Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??

Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
    down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
    This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
   of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
    This creates a new levels adjustment layer using the selection loaded from
    the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER

Module won't run on IIS

Similar Messages

Maybe you are looking for