Monitoring MDM v2.1 with JMX or Weblogic ?
Hi all,
I would like to monitor my MDM application that is in production now and I read that we can use JMX. My question is what is the difference between monitoring a MDM application with weblogic versus JMX ?
Many thanks.
The demo you loaded is for Weblogic server, not for glassfish. You can't just deploy the demo and run it.
I'm not even sure it has been done jet, but may be someone has successfully done it.
Have you searched (google) for a solution?
Timo
Similar Messages
-
Monitoring J2EE1.4-dr with JMX
Hi,
how do I monitor the J2EE1.4-dr server with JMX ?
Do I have to add a jmx-connector in the domain.xml ?
How does this entry have to look ?
This one seems to need a JSR160 JMX server.
I think that I'm more looking for a JSR77 enabled client.
Does the J2EE1.4-dr server support this ?
Is there a HTTP-client available for this ?
Best regards,
RalfFor J2EE1.4-dr, mbeans are not exposed programatically through jmx. It is being considered for the next release.
You can, however, use CLI asadmin command to monitor the server.
Here is an example of how to use CLI asadmin:
step 1: list supported modules for monitoring
asadmin get server.monitoring-service.module-monitoring-levels.\*
step 2: enable specific modules
asadmin set server.monitoring-service.module-monitoring-levels.http_service=HIGH
step 3: list monitoring modules
asadmin list -m server\*
step 4: access the stats
asadmin get -m server.http-service.server.http-listener-1.\*
HTH
-Sridatta -
Monitoring and Reporting with JMX?
We need a good way to monitor JMX objects. From A Network Operations type perspective. Goal being to work with our dev team to dial down values associated with escalations to fix production issues. Currently our plan is to upgrade to sitescope 8.6 (with JMX Support). This option will cost us alot of money. Enough that we are researching other options.
What is the best way to monitor JMX objects with alerts being sent? Are there any options outside sitescope that are reliable and scaleable? Is there a way for JMX events to write to the event log on a W2K3 server, or are there any custom connector services into MOM (microsoft Operations Manager <didn't think so...>) . Please let me know any recommendations you might have. right now our only way is cutom developer work or sitescope.....
Thank You in advance.anyone?
-
Best practice to monitor 10gR3 OSB performance using JMX API?
Hi guys,
I need some advice on the best practice to monitor 10gR3 OSB performance using JMX API.
Jus to show I have done my home work, I managed to get the JMX sample code from
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/example.html#wp1109828
working.
The following is the list of options I am think about:
* Set up: I have a cluster of one 1 admin server with 2 managed servers, which managed server runs an instance of OSB
* What I try to achieve:
- use JMX API to collect OSB stats data periodically as in sample code above then save data as a record to a
database table
Options/ideas:
1. Simplest approach: Run the modified version of JMX sample on the Admin Server to save stats data to database
regularly. I can't see problems with this one ...
2. Use WLI to schedule the Task of collecting stats data regularly. May be overkill if option 1 above is good for production
3. Deploy a simple web app on Admin Server, say a simple servlet that displays a simple page to start/stop and configure
data collection interval for the timer
What approach would you experts recommend?
BTW, the caveats os using JMX in http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/jmx_monitoring/concepts.html#wp1095673
says
Oracle strongly discourages using this API in a concurrent manner with more than one thread or process. This is because a reset performed in
one thread or process is not visible to another threads or processes. This caveat also applies to resets performed from the Monitoring Dashboard of
the Oracle Service Bus Console, as such resets are not visible to this API.
Under what scenario would I be breaking this rule? I am a little worried about its statement
discourages using this API in a concurrent manner with more than one thread or process
Thanks in advance,
SamHi Manoj,
Thanks for getting back. I am afraid configuring aggregation interval from Dashboard doesn't solve problem as I need to collect stats data of endpoint URI or in hourly or daily basis, then output to CSV files so line graphs can be drawn for chosen applications.
Just for those who may be interested. It's not possible to use SQL to query database tables to extract OSB stats for a specified time period, say 9am - 5pm. I raised a support case already and the response I got back is 'No'.
That means using JMX API will be the way to go :)
Has anyone actually done this kind of OSB stats report and care to give some pointers?
I am thinking of using 7 or 1 days as the aggregation interval set in Dashboard of OSB admin console then collects stats data using JMX(as described in previous link) hourly using WebLogic Server JMX Timer Service as described in
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jmxinst/timer.html instead of Java's Timer class.
Not sure if this is the best practice.
Thanks,
Regards,
Sam -
Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3
Hello,
I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
Please guide me to resolve the problem.
C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
Do you wish to run the CRS evaluation installation? [Y/N]: y
Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
The CRS evaluation install will attempt to create the database. Press [Return] t
o continue or any other key to quit:
Enter mysql database connection details
Enter user name: admin
Enter user password: admin
Enter database name: crsprod
Enter 'root' user password:
Creating database...
Finished database creation
Enter weblogic admin server URL: http://localhost:7001
Enter weblogic admin server username: weblogic
Enter weblogic admin server password: weblogic123
Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
all:
[copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
[delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
cim.tmp
BUILD SUCCESSFUL
Total time: 0 seconds
Application Server: weblogic
The following installed ATG components are being used to launch:
ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
Nucleus running
atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
(Searching for products... done.)
atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
atg.cim.productconfig.appserver.AppServerSelectTask starting...
atg.cim.productconfig.appserver.AppServerSelectTask finished.
atg.cim.productconfig.appserver.AppServerPathTask starting...
atg.cim.productconfig.appserver.AppServerPathTask finished.
atg.cim.productconfig.appserver.DomainPathTask starting...
atg.cim.productconfig.appserver.DomainPathTask finished.
atg.cim.productconfig.appserver.UrlTask starting...
atg.cim.productconfig.appserver.UrlTask finished.
atg.cim.productconfig.appserver.UsernameTask starting...
atg.cim.productconfig.appserver.UsernameTask finished.
atg.cim.productconfig.appserver.PasswordTask starting...
atg.cim.productconfig.appserver.PasswordTask finished.
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
atg.cim.database.CreateSchemaTask starting...
atg.cim.database.CreateSchemaTask finished.
atg.cim.database.ImportDataTask starting...
Combining template tasks...Success
Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
/CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
icing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
oreRepository
/CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
catalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
ce/pricing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
pository
/CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
iteRepository
/CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
atalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
pository
/CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
ts/Giftlists
/CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
entory/InventoryRepository
/CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
ofileAdapterRepository
/CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
OrderRepository
/CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
rder/OrderRepository
/CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
tores/StoreRepository
/CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
e/claimable/ClaimableRepository
... > Success
All Imports Completed Successfully
atg.cim.database.ImportDataTask finished.
atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
atg.cim.productconfig.appassembly.EarFileNameTask starting...
atg.cim.productconfig.appassembly.EarFileNameTask finished.
atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
Error Executing Batch File
atg.cim.worker.TaskException: Error deploying to weblogic
atg.cim.worker.TaskException: Error exececuting batch file
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
130)
at atg.cim.Launcher.startCimFlow(Launcher.java:278)
at atg.cim.Launcher.main(Launcher.java:99)
Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
at atg.cim.worker.Task.handleException(Task.java:72)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:159)
at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
pl.java:150)
at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
(HeadlessExecutorImpl.java:140)
at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
tchChooserExecutor.java:169)
at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
120)
... 2 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
red while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
utionWrapper.java:167)
at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:155)
... 7 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 20 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
1
at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 34 more
Nucleus shutting down
Nucleus shutdown complete
Thanks.This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
http://localhost:7001 instead of t3://localhost:7001
Thanks. -
MDM 7.1 with XI 3.0
Can we have MDM 7.1 with Xi 3.0, we don't plan on using any MDM XI Business content, nor the new PI adaptor, can we have the same original loosely coupled architecture where the integration point b/w XI & MDM is the outbound port and nothing else?
-Sudhir.Hi,
You can use XI3.0,its offers what you are expecting,But direct communication to MDM not possible,but you can connect to File System,you can pick up syndicated files and send to receiver.
Regards,
Raj -
My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.
My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?
Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!
-
I have an iMac (the desktop) I've stupidly left the cable you plug the monitor into the wall with there. What are they called and where can I get a new one?
Presumably the mains cable, which you can get from an Apple Store.
-
HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3. When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working. When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode. I am using a DVI connection with the adapter for the mini display plug. REALLY FRUSTRATING. Any help would be extremely appreciated.
Hi lancekatigbak,
If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden -
Issue with bringing up Weblogic 10.3 after changing username passcode
I am facing Issue with bringing up Weblogic 10.3 after changing username passcode in security realm Madhok, basically i have removed the default weblogic user and defined m,y own custome user and provide the credentials in the server start tab. When i try and bring up the admin server it comes up fine but the managed servers fail to start from admin console and i can see security credentials authentication error in logs? Why would that be considering the admin server is able to come up with the same credentials.
-Priya Madhok
Systems Architect
InterAlliance Group Services
http://www.interalliancegroup.comWe had similar problem in the past, our problem was:
Problem:
We deleted weblogic default user from security realm and create new user when node manager and the managed servers were down. When we tries to bring up the managed servers after starting node manager we kept getting authentication denied errors.
Solution:
Recreate weblogic user and now try and bring up managed servers from command line using weblogic user. Once they are up shut them down and bring them up again with the new user you have created and it will work
Reason:
The managed servers in 10.3 seems to be storing the authentication details in there local managed servers ldap or cache. When you start the managed servers the don't know the new credentials and are authenticating against older values of stored credentials, hence they fail. Once they are started with the old credentials they communicate with admin servers to sync there cache with admin servers and the new credentials gets updated and from then on you can restart the managed servers with new credentials.
Note: Sometimes after restart you may face the problem as the sync process with admin server is asynchornous, weblogic prints a line saying something like Performing async operation with server address null. If the line gets printed sync has happened and you are good. In case you don't see the line restart again and you will see the line after which you can restart with new credentials. -
MDM catalog integration with SRM 7.0
Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa -
Using EJB with Hibernate on Weblogic Server ADF platform
Hi all,
We use Jdeveloper 11.1.1.4 and WLS 10.3
I tried to use Hibernate on my project according to this link well, EJB with Hibernate On Weblogic
I wanto use Hibernate tool because toplink and eclipselink can not achieve the issue about generating update* ddl on schema, they can just only re-create the tables -not real update.
Firstly i got the related jars from internet: http://www.2hotfile.com/di-LSBU.png
cglib-2.2
antlr-2.7.6
commons-collections-3.1
dom4j-1.6.1
hibernate3
hibernate-validator-4.1.0.Final
javassist-3.9.0.GA
jta-1.1
slf4j-api-1.5.11
slf4j-nop-1.5.11
Then i added to model project as library dependencies: http://www.2hotfile.com/di-GMSZ.png
configured persistence.xml as below:
<?xml version="1.0" encoding="windows-1252" ?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd"
version="1.0">
<persistence-unit name="VakkoEJBModel" transaction-type="RESOURCE_LOCAL">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>jdbc/VakkoDS</jta-data-source>
<properties>
<property name="hibernate.jndi.url" value="t3://127.0.0.1:7001" />
<property name="hibernate.connection.datasource" value="jdbc/VakkoDS" />
<property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.WeblogicTransactionManagerLookup" />
<property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect" />
<property name="hibernate.hbm2ddl.auto" value="update" />
<property name="hibernate.current_session_context_class" value="jta" />
</properties>
</persistence-unit>
</persistence>
weblogic-application.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<weblogic-application>
<prefer-application-packages>
<package-name>antlr.*</package-name>
<package-name>org.hibernate.*</package-name>
<!-- package-name>org.apache.commons.logging.*</package-name -->
<!-- package-name>org.w3c.dom.*</package-name -->
</prefer-application-packages>
</weblogic-application>
weblogic-ejb-jar.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<weblogic-ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-ejb-jar http://www.bea.com/ns/weblogic/weblogic-ejb-jar/1.0/weblogic-ejb-jar.xsd"
xmlns="http://www.bea.com/ns/weblogic/weblogic-ejb-jar">
</weblogic-ejb-jar>
ejb-jar.xml
<?xml version="1.0" encoding="windows-1252" ?>
<ejb-jar/>
And i added to setDomainEnv.cmd that line:
set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
deployment profile could be seen by clicking those links:
http://www.2hotfile.com/di-XV68.png
http://www.2hotfile.com/di-8YC9.png
http://www.2hotfile.com/di-ADR4.png
And i tried to manipulate the ear file contents according to these informations: http://middlewaremagic.com/weblogic/wp-content/uploads/2010/06/EAR_Application_Diagram.jpg
under ear\META-INF\application.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd" version="5" xmlns="http://java.sun.com/xml/ns/javaee">
<display-name>ejb1</display-name>
<module>
<ejb>ejb1.jar</ejb>
</module>
</application>
under ear\META-INF\weblogic-application.xml
<?xml version = '1.0' encoding = 'windows-1254'?>
<weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
<prefer-application-packages>
<package-name>org.hibernate.*</package-name>
<package-name>antlr.*</package-name>
<!-- package-name>org.apache.commons.logging.*</package-name -->
<!-- package-name>org.w3c.dom.*</package-name -->
</prefer-application-packages>
<listener>
<listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
</listener>
<listener>
<listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
</listener>
<library-ref>
<library-name>adf.oracle.domain</library-name>
</library-ref>
</weblogic-application>
The files which existed in ejb1.ear\ejb1.jar\META-INF\ directory same with source folder of model project (these were created by jdeveloper deployment process according to deployment profile which previously explaint)
ear contents shown that link : http://www.2hotfile.com/di-23X6.png
When i deploy the project to weblogic by using JDeveloper or http://127.0.0.1:7101/console/ method. But occured exception
<10-Dec-2012 16:31:54 o'clock EET> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppDeploymentsControlPage.>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1355149965087' for task '2'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ejb1'.>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
at weblogic.deployment.AbstractPersistenceUnitRegistry.storeDescriptors(AbstractPersistenceUnitRegistry.java:349)
at weblogic.deployment.AbstractPersistenceUnitRegistry.loadPersistenceDescriptor(AbstractPersistenceUnitRegistry.java:263)
at weblogic.deployment.ModulePersistenceUnitRegistry.<init>(ModulePersistenceUnitRegistry.java:69)
at weblogic.ejb.container.deployer.EJBModule.setupPersistenceUnitRegistry(EJBModule.java:223)
at weblogic.ejb.container.deployer.EJBModule$1.execute(EJBModule.java:324)
at weblogic.deployment.PersistenceUnitRegistryInitializer.setupPersistenceUnitRegistries(PersistenceUnitRegistryInitializer.java:62)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:393)
What are my mistake/s or incompletes?
Please help me and excuse my poor English. Thanks in advanceThanks again for your consideration.
I double checked CLASSPATH. And seen starting wls with classpath which i defined, but no change about ecxeption.
you can see wls starting classpath through the link: http://www.2hotfile.com/image.php?di=BQNE
setDomainEnv.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
@REM *************************************************************************
@REM This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
@REM
@REM This script initializes the following variables before calling commEnv to set other variables:
@REM
@REM WL_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
@REM this script to switch between Sun or BEA or just have the default be set.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server. Depends directly on which JAVA_VM value is set by default or by the environment.
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DOMAIN_PRODUCTION_MODE
@REM - The variable that determines whether the workshop related settings like the debugger,
@REM testconsole or iterativedev should be enabled. ONLY settable using the
@REM command-line parameter named production
@REM NOTE: Specifying the production command-line param will force
@REM the server to start in production mode.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
set COMMON_COMPONENTS_HOME=C:\Oracle\Middleware_11.1.1.4\oracle_common
for %%i in ("%COMMON_COMPONENTS_HOME%") do set COMMON_COMPONENTS_HOME=%%~fsi
@REM C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
set CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;%CLASSPATH%;
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set PORTLET_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WL_HOME=C:\Oracle\Middleware_11.1.1.4\wlserver_10.3
for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
set BEA_JAVA_HOME=
set SUN_JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
if "%JAVA_VENDOR%"=="Oracle" (
set JAVA_HOME=%BEA_JAVA_HOME%
) else (
if "%JAVA_VENDOR%"=="Sun" (
set JAVA_HOME=%SUN_JAVA_HOME%
) else (
set JAVA_VENDOR=Sun
set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
@REM set JAVA_HOME=C:\Oracle\Middleware_11.1.1.4\jdk160_21
@REM We need to reset the value of JAVA_HOME to get it shortened AND
@REM we can not shorten it above because immediate variable expansion will blank it
set JAVA_HOME=%JAVA_HOME%
for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
set SAMPLES_HOME=%WL_HOME%\samples
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
set LONG_DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
if "%DEBUG_PORT%"=="" (
set DEBUG_PORT=8453
if "%SERVER_NAME%"=="" (
set SERVER_NAME=DefaultServer
set DERBY_FLAG=false
set enableHotswapFlag=
set PRODUCTION_MODE=
set doExitFlag=false
set verboseLoggingFlag=false
for %%p in (%*) do call :SET_PARAM %%p
GOTO :CMD_LINE_DONE
:SET_PARAM
for %%q in (%1) do set noQuotesParam=%%~q
if /i "%noQuotesParam%" == "nodebug" (
set debugFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "production" (
set DOMAIN_PRODUCTION_MODE=true
GOTO :EOF
if /i "%noQuotesParam%" == "notestconsole" (
set testConsoleFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noiterativedev" (
set iterativeDevFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
set logErrorsToConsoleFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noderby" (
set DERBY_FLAG=false
GOTO :EOF
if /i "%noQuotesParam%" == "doExit" (
set doExitFlag=true
GOTO :EOF
if /i "%noQuotesParam%" == "noExit" (
set doExitFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "verbose" (
set verboseLoggingFlag=true
GOTO :EOF
if /i "%noQuotesParam%" == "enableHotswap" (
set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
GOTO :EOF
) else (
set PROXY_SETTINGS=%PROXY_SETTINGS% %1
GOTO :EOF
:CMD_LINE_DONE
set MEM_DEV_ARGS=
if "%DOMAIN_PRODUCTION_MODE%"=="true" (
set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
if "%PRODUCTION_MODE%"=="true" (
set debugFlag=false
set testConsoleFlag=false
set iterativeDevFlag=false
set logErrorsToConsoleFlag=false
@REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
@REM Please uncomment the following lines and add a valid value for the environment variables
@REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
@REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
@REM set PATCH_PATH=[myPatchPath] (windows)
@REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
@REM PATCH_LIBPATH=[myPatchLibpath] (unix)
@REM PATCH_PATH=[myPatchPath] (unix)
call "%WL_HOME%\common\bin\commEnv.cmd"
set WLS_HOME=%WL_HOME%\server
set XMS_SUN_64BIT=256
set XMS_SUN_32BIT=256
set XMX_SUN_64BIT=512
set XMX_SUN_32BIT=512
set XMS_JROCKIT_64BIT=256
set XMS_JROCKIT_32BIT=256
set XMX_JROCKIT_64BIT=512
set XMX_JROCKIT_32BIT=512
if "%JAVA_VENDOR%"=="Sun" (
set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
echo this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
) else (
set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
echo this is noooooooooooooooooooooooooooooooooooooooooooooooot sun
if "%JAVA_VENDOR%"=="Oracle" (
set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_JROCKIT_64BIT%m -Xmx%XMX_JROCKIT_64BIT%m
set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_JROCKIT_32BIT%m -Xmx%XMX_JROCKIT_32BIT%m
) else (
set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_SUN_64BIT%m -Xmx%XMX_SUN_64BIT%m
set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_SUN_32BIT%m -Xmx%XMX_SUN_32BIT%m
set MEM_ARGS_64BIT=%CUSTOM_MEM_ARGS_64BIT%
set MEM_ARGS_32BIT=%CUSTOM_MEM_ARGS_32BIT%
if "%JAVA_USE_64BIT%"=="true" (
set MEM_ARGS=%MEM_ARGS_64BIT%
) else (
set MEM_ARGS=%MEM_ARGS_32BIT%
set MEM_PERM_SIZE_64BIT=-XX:PermSize=128m
set MEM_PERM_SIZE_32BIT=-XX:PermSize=128m
if "%JAVA_USE_64BIT%"=="true" (
set MEM_PERM_SIZE=%MEM_PERM_SIZE_64BIT%
) else (
set MEM_PERM_SIZE=%MEM_PERM_SIZE_32BIT%
set MEM_MAX_PERM_SIZE_64BIT=-XX:MaxPermSize=512m
set MEM_MAX_PERM_SIZE_32BIT=-XX:MaxPermSize=512m
if "%JAVA_USE_64BIT%"=="true" (
set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_64BIT%
) else (
set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_32BIT%
if "%JAVA_VENDOR%"=="Sun" (
if "%PRODUCTION_MODE%"=="" (
set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
@REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
if "%JAVA_VENDOR%"=="Sun" (
set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="HP" (
set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="Apple" (
set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
@REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
set USER_MEM_ARGS=-Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
if NOT "%USER_MEM_ARGS%"=="" (
set MEM_ARGS=%USER_MEM_ARGS%
set ORACLE_DOMAIN_CONFIG_DIR=%DOMAIN_HOME%\config\fmwconfig
for %%i in ("%ORACLE_DOMAIN_CONFIG_DIR%") do set ORACLE_DOMAIN_CONFIG_DIR=%%~fsi
set WLS_JDBC_REMOTE_ENABLED=-Dweblogic.jdbc.remoteEnabled=false
if "%WC_OHOME_ARGUMENT%"=="" (
set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%PORTLET_OHOME_ARGUMENT%"=="" (
set PORTLET_OHOME_ARGUMENT=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%WC_OHOME_ARGUMENT%"=="" (
set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
set ALT_TYPES_DIR=%COMMON_COMPONENTS_HOME%\modules\oracle.ossoiap_11.1.1,%COMMON_COMPONENTS_HOME%\modules\oracle.oamprovider_11.1.1
set PROTOCOL_HANDLERS=oracle.mds.net.protocol
if "%JAVA_VENDOR%"=="Sun" (
set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
) else (
if "%JAVA_VENDOR%"=="Oracle" (
set EXTRA_JAVA_PROPERTIES=-Djrockit.codegen.newlockmatching=true %EXTRA_JAVA_PROPERTIES%
) else (
set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS:;="|"%
@REM To use Java Authorization Contract for Containers (JACC) in this domain,
@REM please uncomment the following section. If there are multiple machines in
@REM your domain, be sure to edit the setDomainEnv in the associated domain on
@REM each machine.
@REM
@REM -Djava.security.manager
@REM -Djava.security.policy=location of weblogic.policy
@REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
@REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
@REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.tagging.scopeTags=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.analytics.disable-native-partitioning=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dwsm.repository.path=%DOMAIN_HOME%\oracle\store\gmds %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dcommon.components.home=%COMMON_COMPONENTS_HOME% -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=%DOMAIN_HOME% -Djrockit.optfile=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=%ORACLE_DOMAIN_CONFIG_DIR%\servers\%SERVER_NAME% -Doracle.domain.config.dir=%ORACLE_DOMAIN_CONFIG_DIR% -Digf.arisidbeans.carmlloc=%ORACLE_DOMAIN_CONFIG_DIR%\carml -Digf.arisidstack.home=%ORACLE_DOMAIN_CONFIG_DIR%\arisidprovider -Doracle.security.jps.config=%DOMAIN_HOME%\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=%DOMAIN_HOME%\servers\%SERVER_NAME%\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=%ALT_TYPES_DIR% -Djava.protocol.handler.pkgs=%PROTOCOL_HANDLERS% %WLS_JDBC_REMOTE_ENABLED% %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Djps.app.credential.overwrite.allowed=true %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
set ARDIR=%WL_HOME%\server\lib
pushd %LONG_DOMAIN_HOME%
@REM Clustering support (edit for your cluster!)
if "%ADMIN_URL%"=="" (
@REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
) else (
set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
if NOT "%LOG4J_CONFIG_FILE%"=="" (
set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
set JAVA_DEBUG=
if "%debugFlag%"=="true" (
set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
) else (
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
if NOT exist %JAVA_HOME%\lib (
echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
echo Please edit your environment and set the JAVA_HOME
echo variable to point to the root directory of your Java installation.
popd
pause
GOTO :EOF
if "%DERBY_FLAG%"=="true" (
set DATABASE_CLASSPATH=%DERBY_CLASSPATH%
) else (
set DATABASE_CLASSPATH=%DERBY_CLIENT_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar;%POST_CLASSPATH%
) else (
set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar
if NOT "%PRE_CLASSPATH%"=="" (
set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;%PRE_CLASSPATH%
) else (
set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar
if "%PORTLET_ORACLE_HOME%"=="" (
set POST_CLASSPATH=%WC_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar;%POST_CLASSPATH%
) else (
set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar
set POST_CLASSPATH=%PORTLET_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
set POST_CLASSPATH=%DOMAIN_HOME%\wcps-lib\derby-10.6.1.0.jar;%DOMAIN_HOME%\wcps-lib\derbytools-10.6.1.0.jar;%POST_CLASSPATH%
if NOT "%DATABASE_CLASSPATH%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%
) else (
set POST_CLASSPATH=%DATABASE_CLASSPATH%
if NOT "%ARDIR%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%ARDIR%\xqrl.jar
) else (
set POST_CLASSPATH=%ARDIR%\xqrl.jar
@REM PROFILING SUPPORT
set JAVA_PROFILE=
set SERVER_CLASS=weblogic.Server
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
if "%PRODUCTION_MODE%"=="true" (
set JAVA_OPTIONS= -Dweblogic.ProductionModeEnabled=true %JAVA_OPTIONS%
@REM -- Setup properties so that we can save stdout and stderr to files
if NOT "%WLS_STDOUT_LOG%"=="" (
echo Logging WLS stdout to %WLS_STDOUT_LOG%
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
if NOT "%WLS_STDERR_LOG%"=="" (
echo Logging WLS stderr to %WLS_STDERR_LOG%
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
@REM ADD EXTENSIONS TO CLASSPATHS
@REM set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
if NOT "%EXT_PRE_CLASSPATH%"=="" (
if NOT "%PRE_CLASSPATH%"=="" (
set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
) else (
set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%
if NOT "%EXT_POST_CLASSPATH%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
) else (
set POST_CLASSPATH=%EXT_POST_CLASSPATH%
if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
set JAVA_OPTIONS=%JAVA_OPTIONS%
@REM SET THE CLASSPATH
if NOT "%WLP_POST_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%WLP_POST_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%WLP_POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%POST_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%POST_CLASSPATH%
if NOT "%WEBLOGIC_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%WEBLOGIC_CLASSPATH%
if NOT "%PRE_CLASSPATH%"=="" (
set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
if NOT "%JAVA_VENDOR%"=="BEA" (
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
) else (
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
startWebLogic.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
SETLOCAL
@REM --- Start Functions ---
@REM set JAVA_OPTIONS=-javaagent:C:\jarlar\jrebel\jrebel.jar %JAVA_OPTIONS%
@REM set CLASS_CACHE=false
GOTO :ENDFUNCTIONS
:stopAll
@REM We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if NOT "X%ALREADY_STOPPED%"=="X" (
GOTO :EOF
@REM STOP DERBY (only if we started it)
if "%DERBY_FLAG%"=="true" (
echo Stopping Derby server...
call "%WL_HOME%\common\derby\bin\stopNetworkServer.cmd" >"%DOMAIN_HOME%\derbyShutdown.log" 2>&1
echo Derby server stopped.
set ALREADY_STOPPED=true
GOTO :EOF
:classCaching
echo Class caching enabled...
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlaunch.main.class=%SERVER_CLASS% -Dlaunch.class.path="%CLASSPATH%" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp %WL_HOME%\server\lib\pcl2.jar
set SERVER_CLASS=com.oracle.classloader.launch.Launcher
GOTO :EOF
:ENDFUNCTIONS
@REM --- End Functions ---
@REM *************************************************************************
@REM This script is used to start WebLogic Server for this domain.
@REM
@REM To create your own start script for your domain, you can initialize the
@REM environment by calling @USERDOMAINHOME\setDomainEnv.
@REM
@REM setDomainEnv initializes or calls commEnv to initialize the following variables:
@REM
@REM BEA_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server.
@REM JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
@REM PATH - JDK and WebLogic directories are added to system path.
@REM WEBLOGIC_CLASSPATH
@REM - Classpath needed to start WebLogic Server.
@REM PATCH_CLASSPATH - Classpath used for patches
@REM PATCH_LIBPATH - Library path used for patches
@REM PATCH_PATH - Path used for patches
@REM WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
@REM JAVA_VM - The java arg specifying the VM to run. (i.e.
@REM - server, -hotspot, etc.)
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DERBY_HOME - Derby home directory.
@REM DERBY_CLASSPATH
@REM - Classpath needed to start Derby.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM CLASS_CACHE - Enable class caching of system classpath.
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
@REM Call setDomainEnv here.
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
@REM Start Derby
set DERBY_DEBUG_LEVEL=0
if "%DERBY_FLAG%"=="true" (
call "%WL_HOME%\common\derby\bin\startNetworkServer.cmd" >"%DOMAIN_HOME%\derby.log" 2>&1
set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS%
set SAVE_JAVA_OPTIONS=
set CLASSPATH=%SAVE_CLASSPATH%
set SAVE_CLASSPATH=
if "%PRODUCTION_MODE%"=="true" (
set WLS_DISPLAY_MODE=Production
) else (
set WLS_DISPLAY_MODE=Development
if NOT "%WLS_USER%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.username=%WLS_USER%
if NOT "%WLS_PW%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.password=%WLS_PW%
if NOT "%MEDREC_WEBLOGIC_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%CLASSPATH%;%MEDREC_WEBLOGIC_CLASSPATH%
) else (
set CLASSPATH=%MEDREC_WEBLOGIC_CLASSPATH%
echo .
echo .
echo JAVA Memory arguments: %MEM_ARGS%
echo .
echo WLS Start Mode=%WLS_DISPLAY_MODE%
echo .
echo CLASSPATH=%CLASSPATH%
echo .
echo PATH=%PATH%
echo .
echo ***************************************************
echo * To start WebLogic Server, use a username and *
echo * password assigned to an admin-level user. For *
echo * server administration, use the WebLogic Server *
echo * console at http:\\hostname:port\console *
echo ***************************************************
@REM CLASS CACHING
if "%CLASS_CACHE%"=="true" (
CALL :classCaching
@REM START WEBLOGIC
echo starting weblogic with Java version:
%JAVA_HOME%\bin\java %JAVA_VM% -version
if "%WLS_REDIRECT_LOG%"=="" (
echo Starting WLS with line:
echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
) else (
echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
CALL :stopAll
popd
@REM Exit this script only if we have been told to exit.
if "%doExitFlag%"=="true" (
exit
ENDLOCAL
Edited by: webyildirim on 11.Ara.2012 02:38 -
Is it possible to add a second monitor via mac mini with iMac
Hi
is it possible to add a second monitor via mac mini with iMac
or is there another solution?
all i want to know is if i can run a second monitor or link a mac mini for more speed like i heard you can with the G5 Towers.The iMac will allow you to connect a second monitor but that monitor will show the same thing as the iMac's built-in screen.
You can network a Mac mini and iMac via Ethernet or Firewire.
Software load sharing like Xgrid can allow you to share work between the Macs. -
How do i clean spots on monitor of macbook pro with retina display?
how do i clean spots on monitor of macbook pro with retina display?
Light alcohol cleaners, like what you use for camers lenses, works. Just do not have the soft cloth cleaning pad dripping wet ... dripping wet will allow fluid to get onto internal components.
-
How do I connect dual monitors to my x61 with docking?
How do I connect dual monitors to my X61 with docking?
There are some ideas in this thread
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Maybe you are looking for
-
Funky and annoying issues with my ipods harddrive, can anyone help please?
Hi everyone, this is the first time ive been to an ipod support forum, ive tried everything and this is the last resort please help! ive got a 4thgeneration ipod (non-color) and this is my 4th one, after a random period of time (between 4 weeks to 2
-
What is the equivalent C function of the "String Subset"
So i havnen't wrote C code since my freshman year in school and i've forgotten everything. Is there an equivalent C function that is like the "String Subset" function used in Labview? Thanks
-
"There was an error loading the preference bundle for accessibility" it appears when i open my accessibility
-
Vboxfs shared file not support by kernel
I install a oracle linux 4 in vitrualbox hosted by window, set up a shared folder from virtual bos, when tried to mount from linux on shared point, it tell me kernel not support vboxfs. any help. thanks
-
Possible MOD help? required please
I have put my phone number into the BT website and it said i should be acheiving speeds of between 10mb and 19mb, with an estimated speed of 17.5mb. Anyway i rang BT this morning and was told that is what i should be getting and that everything had b