Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3

Hello,
I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
Please guide me to resolve the problem.
C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
Do you wish to run the CRS evaluation installation? [Y/N]: y
Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
The CRS evaluation install will attempt to create the database. Press [Return] t
o continue or any other key to quit:
Enter mysql database connection details
Enter user name: admin
Enter user password: admin
Enter database name: crsprod
Enter 'root' user password:
Creating database...
Finished database creation
Enter weblogic admin server URL: http://localhost:7001
Enter weblogic admin server username: weblogic
Enter weblogic admin server password: weblogic123
Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
all:
[copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
[delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
cim.tmp
BUILD SUCCESSFUL
Total time: 0 seconds
Application Server: weblogic
The following installed ATG components are being used to launch:
ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
Nucleus running
atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
(Searching for products... done.)
atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
atg.cim.productconfig.appserver.AppServerSelectTask starting...
atg.cim.productconfig.appserver.AppServerSelectTask finished.
atg.cim.productconfig.appserver.AppServerPathTask starting...
atg.cim.productconfig.appserver.AppServerPathTask finished.
atg.cim.productconfig.appserver.DomainPathTask starting...
atg.cim.productconfig.appserver.DomainPathTask finished.
atg.cim.productconfig.appserver.UrlTask starting...
atg.cim.productconfig.appserver.UrlTask finished.
atg.cim.productconfig.appserver.UsernameTask starting...
atg.cim.productconfig.appserver.UsernameTask finished.
atg.cim.productconfig.appserver.PasswordTask starting...
atg.cim.productconfig.appserver.PasswordTask finished.
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
atg.cim.database.CreateSchemaTask starting...
atg.cim.database.CreateSchemaTask finished.
atg.cim.database.ImportDataTask starting...
Combining template tasks...Success
Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
/CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
icing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
oreRepository
/CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
catalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
ce/pricing/priceLists/PriceLists
/CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
pository
/CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
iteRepository
/CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
atalog/ProductCatalog
/CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
pository
/CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
ts/Giftlists
/CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
entory/InventoryRepository
/CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
ofileAdapterRepository
/CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
OrderRepository
/CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
rder/OrderRepository
/CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
tores/StoreRepository
/CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
e/claimable/ClaimableRepository
... > Success
All Imports Completed Successfully
atg.cim.database.ImportDataTask finished.
atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.worker.common.MapPropertyFileCreatorTask starting...
atg.cim.worker.common.MapPropertyFileCreatorTask finished.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
atg.cim.productconfig.appassembly.EarFileNameTask starting...
atg.cim.productconfig.appassembly.EarFileNameTask finished.
atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
Error Executing Batch File
atg.cim.worker.TaskException: Error deploying to weblogic
atg.cim.worker.TaskException: Error exececuting batch file
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
130)
at atg.cim.Launcher.startCimFlow(Launcher.java:278)
at atg.cim.Launcher.main(Launcher.java:99)
Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
at atg.cim.worker.Task.handleException(Task.java:72)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:159)
at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
pl.java:150)
at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
(HeadlessExecutorImpl.java:140)
at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
tchChooserExecutor.java:169)
at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
120)
... 2 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
red while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
utionWrapper.java:167)
at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
execute(OnlineCreateServerInstanceTask.java:155)
... 7 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
error occurred while executing this line:
C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:541)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:394)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 20 more
Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
1
at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
a:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
a:391)
... 34 more
Nucleus shutting down
Nucleus shutdown complete
Thanks.

This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
http://localhost:7001 instead of t3://localhost:7001
Thanks.

Similar Messages

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Issue with applet and Weblogic 8.1 SP3

Hello,
I have an applet that is making EJB calls to a Weblogic 8.1 SP2 app server via an IIS web server. The weblogic.ejbc tool was used to generate the stubs and skeletons and deployed into the applet.jar. The applet comes up fine in this scenario. But when this applet is connected to a Weblogic 8.1 SP3 app server it failes to come up. Apparently, there is some dependency between the ejbc generated stubs and skeletons with the service pack that is being used. One way of solving this problem is to generate separate stubs and skeletons for each service pack but I would like to avoid doing this and would like it to be transparent to the applet. Is there any configuration that I can make which can help solve this problem ?
-Vijay

You could check up for the relaease. I don't think there was such a change in SP3. But generating the stubs and skeletons again will definitely solve. You might even test it backwards (generate on SP3 and test on SP2).
xH4x0r

Connecting ATG 10.1.2 with endeca 3.1.1 without CRS..

Hi Guys,
I'm trying to connect ATG 10.1.2 with endeca 3.1.1 without CRS Application. I'm able to connect to endeca app by using the OOTB configuration component.
My real problem is "AssemblerPipelineServlet" is getting the ContentItem from the endeca for the requested page eg:"pages/browse" and forwarding the request to the cartridge JSP. But the fowarded page is not get compiled, Instead browser showing the complete jsp content.
Any help in this regard will be much appreciated.
-Rajaram
Edited by: 991199 on Mar 1, 2013 10:46 AM
Edited by: 991199 on Mar 1, 2013 6:58 PM

Please find the web.xml below:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="2.5" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd">
<display-name>ATG Commerce Reference Store</display-name>
<context-param>
<param-name>atg.session.parentContextName</param-name>
<param-value>/dyn</param-value>
</context-param>
<context-param>
<param-name>atg.dafear.bootstrapContextName</param-name>
<param-value>/dyn</param-value>
</context-param>
<context-param>
<param-name>context-root</param-name>
<param-value>prepaid</param-value>
</context-param>
<context-param>
<param-name>atg.assembler</param-name>
<param-value>true</param-value>
</context-param>
<filter>
<filter-name>PageFilter</filter-name>
<filter-class>atg.filter.dspjsp.PageFilter</filter-class>
</filter>
<filter>
<filter-name>ForwardFilter</filter-name>
<filter-class>atg.servlet.ForwardFilter</filter-class>
</filter>
<filter>
<filter-name>ErrorFilter</filter-name>
<filter-class>atg.servlet.ErrorFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>ErrorFilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>ForwardFilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>FORWARD</dispatcher>
<dispatcher>ERROR</dispatcher>
</filter-mapping>
<filter-mapping>
<filter-name>PageFilter</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>ERROR</dispatcher>
<dispatcher>FORWARD</dispatcher>
</filter-mapping>
<filter>
<filter-name>ADCDataInsertFilter</filter-name>
<filter-class>atg.filter.ConditionalDelegatingFilter</filter-class>
<init-param>
<param-name>targetFilter</param-name>
<param-value>
atg.adc.filter.ADCDataInsertFilter
</param-value>
</init-param>
<init-param>
<param-name>mimeTypes</param-name>
<param-value>text/html,dynamo-internal/html</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>ADCDataInsertFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<servlet>
<servlet-name>MappedJumpServlet</servlet-name>
<servlet-class>atg.repository.seo.MappedJumpServlet</servlet-class>
<init-param>
<param-name>loggingDebug</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>jumpServlet</param-name>
<param-value>
ctx:dynamo:/atg/dynamo/servlet/dafpipeline/JumpServlet
</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>NucleusServlet</servlet-name>
<servlet-class>atg.nucleus.servlet.NucleusServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>DynamoProxyServlet</servlet-name>
<servlet-class>atg.nucleus.servlet.NucleusProxyServlet</servlet-class>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>MappedJumpServlet</servlet-name>
<url-pattern>/jump/*</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>link</servlet-name>
<servlet-class>atg.endeca.servlet.NucleusPreviewLinkServlet</servlet-class>
<init-param>
<description>
The Nucleus component path of the NavigationStateBuilder.
</description>
<param-name>navigationStateBuilderComponent</param-name>
<param-value>/atg/endeca/assembler/cartridge/manager/NavigationStateBuilder</param-value>
</init-param>
<init-param>
<description>
The Nucleus component path of the ContentSource.
</description>
<param-name>contentSourceComponent</param-name>
<param-value>/atg/endeca/assembler/cartridge/manager/WorkbenchContentSource</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>link</servlet-name>
<url-pattern>/link.json/*</url-pattern>
</servlet-mapping>
<listener>
<listener-class>atg.taglib.dspjsp.RegisterELResolverServletContextListener</listener-class>
</listener>
<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
<error-page>
<error-code>404</error-code>
<location>/global/pageNotFound.jsp</location>
</error-page>
<error-page>
<error-code>500</error-code>
<location>/global/serverError.jsp</location>
</error-page>
<error-page>
<error-code>409</error-code>
<location>/global/sessionExpired.jsp</location>
</error-page>
<jsp-config>
<jsp-property-group>
<url-pattern>*.jsp</url-pattern>
<page-encoding>UTF-8</page-encoding>
<scripting-invalid>true</scripting-invalid>
<include-prelude>/includes/prelude.jspf</include-prelude>
</jsp-property-group>
</jsp-config>
</web-app>

Could not find source code for Storefront application of CRS in ATG 10.0.1

Hi All,
I am trying to find the source code of Storefront application of CRS in ATG 10.0.1. This is needed to try all the multi-site features in the default website first before doing the same on our application. I want to create a similar setup like MotorpriseJSP application on ATG 10.0.1.
Let me know if there are any options to get the source code for storefront app.
Thanks,
Kishore Kumar.

Hi
You can find the source code for the CRS applicaiton under
ATG10.0.1\CommerceReferenceStore\Store\EStore\src
Thanks
GS

Root.sh fails to bring up crs

Hi All,
I am installing 11gR2 on IBM AIX.
Every ran fine. when i ran root.sh
CRS-2676: Start of 'ora.diskmon' on 't24db1' succeeded
CRS-2676: Start of 'ora.cssd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 't24db1'
CRS-2676: Start of 'ora.ctssd' on 't24db1' succeeded
ASM created and started successfully.
DiskGroup OCR_VOTE created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 't24db1'
CRS-2676: Start of 'ora.crsd' on 't24db1' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 70e7b3c678074f2bbfcf933764645975.
Successful addition of voting disk a85fe5cb0c9a4f88bf5adf830732d62f.
Successful addition of voting disk 52d343aad6374f79bf0257908be9a6c9.
Successfully replaced voting disk group with +OCR_VOTE.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 70e7b3c678074f2bbfcf933764645975 (/dev/rhdisk10) [OCR_VOTE]
2. ONLINE a85fe5cb0c9a4f88bf5adf830732d62f (/dev/rhdisk11) [OCR_VOTE]
3. ONLINE 52d343aad6374f79bf0257908be9a6c9 (/dev/rhdisk5) [OCR_VOTE]
Located 3 voting disk(s).
CRS-2673: Attempting to stop 'ora.crsd' on 't24db1'
CRS-2677: Stop of 'ora.crsd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.asm' on 't24db1'
CRS-2677: Stop of 'ora.asm' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.ctssd' on 't24db1'
CRS-2677: Stop of 'ora.ctssd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 't24db1'
CRS-2677: Stop of 'ora.cssdmonitor' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 't24db1'
CRS-2677: Stop of 'ora.cssd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 't24db1'
CRS-2677: Stop of 'ora.gpnpd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 't24db1'
CRS-2677: Stop of 'ora.gipcd' on 't24db1' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 't24db1'
CRS-2677: Stop of 'ora.mdnsd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.mdnsd' on 't24db1'
CRS-2676: Start of 'ora.mdnsd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 't24db1'
CRS-2676: Start of 'ora.gipcd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 't24db1'
CRS-2676: Start of 'ora.gpnpd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 't24db1'
CRS-2676: Start of 'ora.cssdmonitor' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 't24db1'
CRS-2672: Attempting to start 'ora.diskmon' on 't24db1'
CRS-2676: Start of 'ora.diskmon' on 't24db1' succeeded
CRS-2676: Start of 'ora.cssd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 't24db1'
CRS-2676: Start of 'ora.ctssd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.asm' on 't24db1'
CRS-2676: Start of 'ora.asm' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 't24db1'
CRS-2676: Start of 'ora.crsd' on 't24db1' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 't24db1'
CRS-2676: Start of 'ora.evmd' on 't24db1' succeeded
Timed out waiting for the CRS stack to start.
I can also do the ocrcheck and i am also able to connect to ASM.
crs process is not coming up.
I tried to start it manually but no luck.
alert log
[crsd(11534476)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:29:50.913
[crsd(11534476)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:29:52.130
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:29:53.760
[crsd(11468998)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:29:54.029
[crsd(11468998)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:29:55.246
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:29:55.246
[ohasd(6947036)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
2011-09-21 20:51:59.589
[crsd(8650916)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:51:59.854
[crsd(8650916)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:00.895
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:02.588
[crsd(9306182)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:02.852
[crsd(9306182)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:04.024
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:05.693
[crsd(9306184)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:05.961
[crsd(9306184)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:07.174
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:08.807
[crsd(11337884)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:09.078
[crsd(11337884)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:10.289
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:11.942
[crsd(11206904)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:12.207
[crsd(11206904)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:13.400
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:15.031
[crsd(11337894)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:15.302
[crsd(11337894)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:16.521
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:18.132
[crsd(11337896)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:18.403
[crsd(11337896)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:19.627
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:21.225
[crsd(9306200)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:21.498
[crsd(9306200)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:22.717
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:25.895
[crsd(8650934)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:26.176
[crsd(8650934)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:27.369
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:29.046
[crsd(9306206)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:29.316
[crsd(9306206)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:30.511
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:32.169
[crsd(11337908)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:52:32.435
[crsd(11337908)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:52:33.629
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:52:33.630
[ohasd(6947036)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
2011-09-21 20:57:11.777
[ctssd(8388722)]CRS-2405:The Cluster Time Synchronization Service on host t24db1 is shutdown by user
2011-09-21 20:58:15.374
[ctssd(8519782)]CRS-2403:The Cluster Time Synchronization Service on host t24db1 is in observer mode.
2011-09-21 20:58:15.391
[ctssd(8519782)]CRS-2407:The new Cluster Time Synchronization Service reference node is host t24db1.
2011-09-21 20:58:16.064
[ctssd(8519782)]CRS-2401:The Cluster Time Synchronization Service started on host t24db1.
2011-09-21 20:58:32.499
[crsd(11862176)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:33.649
[crsd(11862176)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:34.450
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:36.075
[crsd(11534462)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:36.339
[crsd(11534462)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:37.560
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:39.190
[crsd(9699394)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:39.555
[crsd(9699394)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:40.677
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:42.311
[crsd(9699396)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:42.586
[crsd(9699396)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:43.790
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:45.435
[crsd(11600058)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:45.720
[crsd(11600058)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:46.909
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:48.536
[crsd(11600060)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:48.799
[crsd(11600060)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:50.037
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:51.670
[crsd(9699410)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:51.940
[crsd(9699410)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:53.151
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:56.298
[crsd(11600072)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:56.559
[crsd(11600072)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:58:57.784
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:58:59.428
[crsd(9699414)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:58:59.733
[crsd(9699414)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:59:00.910
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:59:02.522
[crsd(9699416)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:59:02.798
[crsd(9699416)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:59:04.030
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:59:05.624
[crsd(9699418)]CRS-1012:The OCR service started on node t24db1.
2011-09-21 20:59:05.899
[crsd(9699418)]CRS-1201:CRSD started on node t24db1.
2011-09-21 20:59:07.120
[ohasd(6947036)]CRS-2765:Resource 'ora.crsd' has failed on server 't24db1'.
2011-09-21 20:59:07.121
[ohasd(6947036)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
crsd log
2011-09-21 20:59:06.013: [ default][1]clsu_get_private_ip_addresses: required buffer number is 2. Buffer number passed in 1 is not enough. Return [8]
2011-09-21 20:59:06.013: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 2, from [ clsinet.c : 1735], ret gipcretSuccess (0)
2011-09-21 20:59:06.014: [GIPCXCPT][1] gipcShutdownF: skipping shutdown, count 1, from [ clsgpnp0.c : 1021], ret gipcretSuccess (0)
2011-09-21 20:59:06.015: [ CRSCCL][1]Listening endpoint created sucessfully @ (ADDRESS=(PROTOCOL=tcp)(DEV=52)(HOST=192.168.50.15)(PORT=49390)).con = 116b2c4f0
2011-09-21 20:59:06.018: [ CRSCCL][10799]CSS Group Registration complete.
2011-09-21 20:59:06.018: [ CRSCCL][10799]cclGetMemberData called
2011-09-21 20:59:06.020: [ CRSCCL][10799]Obtained first membership map.
2011-09-21 20:59:06.020: [ CRSCCL][10799]Dumping member data ------------------
2011-09-21 20:59:06.020: [ CRSCCL][10799]Member (1, 1411327295) on node port=.
2011-09-21 20:59:06.020: [ CRSCCL][10799]Done ------------------
2011-09-21 20:59:06.020: [ CRSCCL][10799]Waiting for reconfigs
2011-09-21 20:59:06.020: [ CRSCCL][11056]cclCommunicationHandler started.
2011-09-21 20:59:06.020: [ CRSCCL][1]cclLibShutdown called
2011-09-21 20:59:06.120: [ CRSCCL][10799]CCL Shutting down.
2011-09-21 20:59:06.122: [ CRSCCL][10799]CSS Group Unregister complete.
2011-09-21 20:59:06.122: [ CRSCCL][11056]Comunications Shutdown.
2011-09-21 20:59:06.123: [ CRSCCL][10799]Membership Monitor exiting ...
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc shutting down
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc server shutdown
2011-09-21 20:59:06.123: [ COMMCRS][1]clscugblmterm: (1158d7970) cleaning up icon (116b2bef0) with 1 cons
2011-09-21 20:59:06.123: [ COMMCRS][1]clscugblmterm: (1158d7970) cleaning up open icon (116b2bef0)
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc UGBLM shutdown
2011-09-21 20:59:06.123: [ CRSCCL][1]Clsc shutdown Done
2011-09-21 20:59:06.123: [ CRSCCL][1]ccllibShutdown done.
2011-09-21 20:59:06.123: [CLSFRAME][1] clsCclInit returned failure:4
2011-09-21 20:59:06.123: [CLSFRAME][1] Unable to start module-to-module comms: 2
2011-09-21 20:59:06.123: [ CRSD][1][PANIC] CRSD exiting: unable to start CLS framework
2011-09-21 20:59:06.123: [ CRSD][1] Done.
Please assist me on this.
Thanks and Regards,
Daniesh

1. try to give root capabilities with CAP_NUMA_ATTACH, CAP_BYPASS_RAC_VMM, and CAP_PROPAGATE
2. install 11.2.0.2 version
I solved the problem rootsh fails to bring up crs.

Unable to bring up crs on rac node 2 after server reboot

Hi,
We have a 2 node rac architecture. We are only able to bring up Node 1 on the cluster, whereas node 2 is failing. Here are some points::
1. After the server reboot, node 2 crs crs/resources weren't starting up apart from OHAS.
2. We again stopped both the CRS and tried bringing up CRS on node 2 initially and succeeded. But now node 1 wasn't coming up.
3. Again brought down both nodes' CRS and tried bringing up CRS on node1 and succeded but asm wasn't showing the Diskgroups. So we changed pfile to include asm_diskstring from ORCL* to /dev/oracleasm/disks and we could lsdg in asm now.So started all the instances from node 1 now. Apart from this, again node 2 CRS wasn't starting. From alertlog I saw "CRS-1714:Unable to discover any voting files, retrying discovery in 15 seconds;". But we were able to query voting disks initially. What has gone wrong now??
./crsctl status res -t -init
NAME           TARGET STATE        SERVER                   STATE_DETAILS
Cluster Resources
ora.asm
      1        OFFLINE OFFLINE
ora.cluster_interconnect.haip
      1        ONLINE OFFLINE
ora.crf
      1        ONLINE ONLINE       kusmnd0r
ora.crsd
      1        ONLINE OFFLINE
ora.cssd
      1        ONLINE OFFLINE                               STARTING
ora.cssdmonitor
      1        ONLINE ONLINE       kusmnd0r
ora.ctssd
      1        ONLINE OFFLINE
ora.diskmon
      1        OFFLINE OFFLINE
ora.evmd
      1        ONLINE OFFLINE
ora.gipcd
      1        ONLINE ONLINE       kusmnd0r
ora.gpnpd
      1        ONLINE ONLINE       kusmnd0r
ora.mdnsd
      1        ONLINE ONLINE       kusmnd0r
This is the history of activitites. Kindly someone throw light on this please.
Thanks,
Anirban.

It is on a raw device.
Healthy node::
ls -ltrh /dev/vote*
brw-rw---- 1 crsdwqa dbadwqa 120, 1057 Nov 6 11:32 /dev/vote3
brw-rw---- 1 crsdwqa dbadwqa 120, 1025 Nov 6 11:32 /dev/vote1
brw-rw---- 1 crsdwqa dbadwqa 120, 1041 Nov 6 11:32 /dev/vote2
Affected Node::
ls -ltrh /dev/vote*
brw-rw-r-- 1 crsdwqa dbadwqa 120, 1025 Nov 4 12:06 /dev/vote1
brw-rw-r-- 1 crsdwqa dbadwqa 120, 1041 Nov 4 12:06 /dev/vote2
brw-rw-r-- 1 crsdwqa dbadwqa 120, 1057 Nov 5 04:42 /dev/vote3
Regards,
Anirban.

ATG 10.1.2 with endeca integration setup

Hi,
I am working on setup of crs with endeca atg 10.1.2 version.
i setup the crs application with production and publishing instances.
I installed MDEX 6.4.0, platformservice, tools and framework, CAS service.
Done the full deployment, ran search indexing in production at /atg/commerce/endeca/index/ProductCatalogSimpleIndexingAdmin service. It run successfully all services.
All endeca services are running fine. I am able to see the search indexing products, categories in the location http://localhost:8006/endeca_jspref/controller.jsp host=localhost port=15000.
But while accessing the production site in browser, i am able to see only new items category and products but not all other categories.
I am getting the following error.
19:29:47,052 ERROR [AssemblerTools] A problem occured assembling requested content. Response from the assembler was {enabled=true, @type=DimensionValueCacheRefresh, showCountsEnabl
ed=false, relRankStrategy=exact, @error=com.endeca.infront.navigation.NavigationException: com.endeca.navigation.ENEException: HTTP Error 404 - Navigation Engine not able to proces
s request 'http://localhost:15000/search?terms=*&opts=rel%2bexact&node=0&rank=1&offset=0&groupby=product.repositoryId&refinement=showcounts:0&refinement=numresults:50000&irversion=
640'., maxResults=50000, maxResultsPerDimension=50000}
19:29:47,052 INFO [AssemblerTools] DEBUG Assembled content {enabled=true, @type=DimensionValueCacheRefresh, showCountsEnabled=false, relRankStrategy=exact, @error=com.endeca.infro
nt.navigation.NavigationException: com.endeca.navigation.ENEException: HTTP Error 404 - Navigation Engine not able to process request 'http://localhost:15000/search?terms=*&opts=re
l%2bexact&node=0&rank=1&offset=0&groupby=product.repositoryId&refinement=showcounts:0&refinement=numresults:50000&irversion=640'., maxResults=50000, maxResultsPerDimension=50000}
19:29:47,053 ERROR [DimensionValueCacheTools] Could not retrieve a cache for default. This may indicate communication problems with the MDEX
Please any one help me on this issue.
Thanks,
Sreedhar.

Hi,
Now it resolved. I ran once again indexing manually, now am able to see all categories in crs site.
Thanks,
Sree.

What issues we may face in installing a new Prod portal with same SID as existing one

Hello All -
We found some vbs script files in the host of EP Prod system. On confirmation from SAP we deleted those files without any harm to our prod EP system. But customer is still concerned about the security of the system and wanted us build the new EP prod system with same SID.
We approached SAP and they suggested to install a new EP system and do customization rather than performing system copy from existing prod EP system because that may still bring those security threat changes to new EP prod system. (we ll decommission the old EP if everything works fine in new EP)
Now I would like to list all the issues we may face in building a new EP system with same SID as that of already existing one and then doing entire customization again in new EP from Basis team point of view. The following are very few i could think of. Could you please add some other concerns you could think of.
1) Keeping in mind that this EP system is in use for more than 6 years, some of the customization could have been done on lower versions. So could those changes be again exported from Dev and imported into new version of EP we are building now ?
2) Can't add two hosts with same name in DNS Server
3) Can't add two systems with same SID in Solution Manager for calculation of SPS to upgrade new EP

You would have to run ipsinstall and install the new gateway. Make sure to follow the installation instruction for installing a gateway.
After you install the gateway you follow the steps in the link you posted to let the server know there is a new gateway.
Then make sure to restart the gateway and server.
HTH ..

Importing WORD text files with formatting and Text Flow issues IDCS3

I am a designer who has used ID since it first came out, but have not been utilizing the larger document capabilities lately as I've been working in large format graphics (like really large, so if you have questions on that I can answer!). I am working on a new magazine and the copy is in WORD. I want to know the best way to bring in the text and keep the italic and bold formatting. The WORD docs have no style format done by the writers, so therefore changing the styles to my styles in the custom import section doesn't work. I tried making a character style sheet with no font chosen just "italics", but didn't work. I still was unable to make a paragraph style on top of it.
If anyone has a good methodology for bringing in WORD text and keeping it's attributes while applying ID style sheets please help!
Also with text flow, I have always had an issue with ID with not creating more pages to keep the flow going. In a test I just did I placed the text, but it did not create any new pages. I know there's a way to make that work, but spell it out for me like I'm a person losing their mind which seems to be the case!
Thank you in advance to the person who can give me advice!

What for settings do you have on the importoptions when bringing in Word? Keep formatting or loose formatting? And if loose formatting: is Keep local formatting on or off?

Intaract with oid and bring the all groups resides in oid through ldap

Hi,
i would like to intaract with oid and bring the all groups which were resides in
oracle intrnet directory through ldap. can u please give me the procedure
that i can follow or else suggest me a documentation regarding this .
regards,
srinivas

try this (behaviour not garranteed):
For local groups (groups within the Portal's group install base) you can program a loop on the table PORTAL.WWSEC_GROUP$ then read the column NAME.
For non local groups, use the (unsupported) API wwsec_oid (function get_group_name_from_dn(wwsec_group$.dn) ) instead of reading the NAME column.
If the result is incomplete (synchro issues with OID for instance due to DIP) you'll have to use ldap request with DBMS_LDAP package.(or java alternative, of course)
Patrick.

Non NVidia graphics card issues with Adobe and Mountain Lion

It took me a while to figure it out, but now I am certain. If using a Mac with a non nvidia graphics card there will be issues in Mountain Lion while using Adobe products. I tested this with Illustrator CS6 for over a year on 5 different Mac computers.
Here is what happens
As soon as I open Illustrator on a Mac without a NVidia graphics card and I attend to apply an shadow effect, Illustrator crashes. If I do this procedure on a Mac with a NVidia inside, all works well.
I tested this on the following Macs
MacBook Pro (Early 2009) with NVidia 9600M GT - it works
MacBook Pro (Early 2011) with Radeon 6750M - doesn't work
Mac Pro (Early 2009) with Radeo HD 5770 - doesn't work
The same Mac Pro (Early 2009) with NVidia GT120 - it works
MacBook Air (Mid 2012) with Intel HD 4000 - doesn't work
iMac (Late 2012) with NVidia 680MX - it works
Since I owned all these Macs, I could test it several times with different kind of software updates. 10.8, 10.8.1, 10.8.2 and 10.8.3 did deliver the same result. Everytime the same result.
Already got in touch with Adobe
With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
What can be done, to resolve this issue? I cannot buy only Macs with NVidia inside, since the small portable front of Macs is only coming with Intel graphics cards. And is there anybody out there, having this issue? I cannot be the only one, using shadows in Illustrator.

With Illustrator CS5 it worked like a charme, so I assumed it could be an Adobe issue. But Adobe support told me, it's Apple's fault since 10.8 uses different processes for the graphics performance.
A typical response. IMO it's most likely a combination of Adobe's reluctance to fix the issue combined with Apple's desire for advancement and change. I've personally experienced several things that've become broken owing to Apple changing fundamental aspects of the OS, and the developers of the third-party software in question have either never fixed their software, or are taking their sweet time. WireTap Studio and Snapz Pro from Ambrosia are a case in point, though they eventually fixed Snapz Pro. Eventually…
Frankly, good luck getting either side to do anything about this. Your best bet is probably getting in touch with AppleCare and seeing if you can get this escalated to Engineering, but I wouldn't hold your breath for a fix from either party. Or perhaps one of the Apple mailing lists will prove useful.

An issue with authentication and authorization on ISE 1.2

Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
end

Yes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.

I am quite fed up with Apple and my iMac - multiple issues

I've been a Windows user for years. I've suffered through all of the ups and downs of Windows over the years, mostly the downs. I have three Windows 7 computers, and quite frankly, both have performed quite beautifully, albeit without the polish of the Mac.
Earlier this year, I decided to buy an iMac for a few reasons. First, they are just so beautiful, and even if you are going to run Windows they are probably the best Windows computers out there. Second, I wanted to do more video editing and found the Windows tools weren't very good. I also wanted to run some karaoke software (kJams) that at the time was not available for Windows.
I was basically pleased with the iMac for a few months. However, there was one problem I could never solve: the wifi connection got lost periodically, even though I had made all of the system updates. I know this is a problem with the iMac, because my numerous Windows PCs and my two iPod toouches had no problem with a wifi connection. It appears from various posts here that this is indeed a problem many others have experienced since Snow Leopard's release, and as far as I can tell, despite many updates to the Airport software it has never been fixed by Apple. Strike 1.
A couple of weeks ago, my iMac started running slow for no reason I could identify. I don't have a lot of software installed on it, I didn't download anything pirated or questionable. I did install bootcamp according to Apple's instructions, and it worked fine (I wanted to run some Windows games). I tried doing all of the things that folks suggest when your computer is running slow - repairing permissions, running Onyx, etc. None of them seemed to do anything. I tried creating a new user, it had the same problem. I also noticed various other problems with the computer: it was slow to recognize a USB hard drive (and sometimes didn't recognize it at all), external hard drives would not appear in the time machine set up, and various other problems I can't quite recall. Overall, while presumably nothing serious should have been wrong with my computer, I decided I probably should simply reinstall OS X. Strike 2.
Now, quite frankly I would have been happy to simply reset the computer to its factory state. I would point out that nearly all Windows PCs come with a separate repair partition where it is very easy to do that with one click. I guess Apple is so confident in the reliability of its computers it doesn't think this is a useful feature. So, I had to install OS X using the DVD that came with the computer. It took quite a while to do this, and actually it wasn't at all clear to me that my settings would be kept (one would think that this is something the install screen would point out - Windows makes a quite clear distinction between a "clean install" and a re-install).
I was somewhat pleased when all of my settings were there. After the long process of reinstalling, I click on the "Accounts" setting I get a message saying that the Preferences application has quit unexpectedly -- clearly there are still problems. Quite irritating given that I just spent an hour trying to re-install the OS. I google around and again find others have had this problem, but unfortunately none of the proposed fixes I try seem to work. And my computer still seems to have other problems - it still doesn't recognize external drives very well. I will say that it seemed to be running a little faster though. Strike 3.
Anyway, I decide I need to do a full clean install. When I do that, things seem to be working better, although the mouse pointer is quite jerky - I'm thinking that maybe I need to just run software update to fix that. I start the software update - a nice 1gb download is required. Now ,the problem is that I STILL HAVE THE PROBLEM WITH WIFI DISCONNECTIONS. So no matter how many times I start the download, I CAN"T FINISH IT. And Apple, in its infinite wisdom, HAS NOT WRITTEN A DOWNLOADER THAT IS SMART ENOUGH TO CONTINUE WHERE IT LEFT OFF. How hard is this to do, really? Do I now have to lug my iMac across the house to put it on a wired connection? I've already wasted hours trying to get this piece of junk working.
And the sad fact is, once I am done, I will have a very beautiful computer that can't hold an internet connection.
I have to give Apple kudos for the iMac hardware. It's great. But the software? It's fine as long as it works. But it doesn't always work - and when it doesn't, it actually at this point seems more buggy and difficult to repair than Windows. Is this the last Mac I'll ever buy? Probably. Quite frankly, it's hard to avoid the conclusion that Apple's best developers have moved on to more exciting pastures (iPhone for example). And given the number of unsolved issues posted on these forums (including the ones I mention here), it appears that Apple engineers are simply asleep at the switch.

Let me start by saying I don't use wireless so I haven't had to deal with it, and I assume you know your way around all the settings in your modem/switch and Windows 7.
http://www.google.com/search?sourceid=navclient&q=Applewifi+signaldrops
Google turned up a 43 page thread, going on for a year, not very encouraging.
a href=http://discussions.info.apple.com/thread.jspa?threadID=2142725&tstart=0&me ssageID=12175855#12175855> Dropping Wi FI Signal
Well for weeks (months?) now, since two or three weeks maybe after 10.6.4 was released, I did not have dropped wifi until today. What is different? I applied the latest security patch less than 24 hours ago.
http://support.apple.com/kb/DL1094
Safari and DNS:
http://discussions.apple.com/thread.jspa?threadID=2227251
http://reviews.cnet.com/8301-13727_7-20016549-263.html
Airport:
http://reviews.cnet.com/8301-13727_7-20012462-263.html
Joining an encrypted wireless network
When logged in, then AirPort menu bar icon shows the approximate strength of your wireless network signal. All four signal bars darkened means you have very good throughput. If you don't see this menu bar icon, enable it in AirPort preferences. http://support.apple.com/kb/HT1126
If you can focus on networking, there are some excellent people that hang out there.
http://discussions.apple.com/forum.jspa?forumID=1343
If you bought your iMac this year then it likely came with 10.6.3 and shouldn't have a whole lot of updates, outside of iTunes and Safari etc.
iMac Networking Discussion?
http://discussions.apple.com/forum.jspa?forumID=1111
Support, tutorials, how to, etc:
http://www.apple.com/support/imac/intel/
Potential sources for interference with wireless
http://support.apple.com/kb/HT1365
Bluetooth: If your computer stops recognizing your Apple wireless mouse or wireless trackpad, simply click the mouse button or trackpad surface to get it working again. http://support.apple.com/kb/TS3048
And, sometimes just knowing what make of networking equipment (linksys, netgear, d-link, even Apple). USB ADSL or a USB wireless devices don't work with Macs. Checked for firmware update for the network devices?
Changing from WEP to WPA
How do I change from WEP to WPA security, which I have been told is better. I'm sure it is simple but i cant find it.
These settings are in your wireless router, so you will have to consult the manual for how to access the administration page and change the wireless security settings. Once you have WPA or WPA2 enabled, you will need to reauthenticate your computer with the wireless network since you will have a new password. If you have problems with persistent password requests popping up, you will need to open the "Keychain Access" utility and remove all keychain entries associated with your wireless network and password.
http://reviews.cnet.com/8301-13727_7-20014188-263.html
Networking In networking utilities, the in-depth network troubleshooting and monitoring utility VisualRoute ($49.95) has been updated to fix a bug with the "whois" routine, and likewise the Wi-Fi hot spot finder AirRadar ($19.95) has also been updated with a small bug fix for the signal status not updating.
The network administration and security testing utility NetScan (free) has also been updated and now has a revamped interface and new features for port scanning as well as fixes for icon appearance and update-checking problems.
http://reviews.cnet.com/8301-13727_7-20013211-263.html
As for restore, it is different, won't be the same, but there are two ways to handle that on a Mac:
Apple TimeMachine
Clone OS X: bootable (yes, you can boot from 2nd or 3rd hard drive) - SuperDuper ($29) is superb and I update the backup (15 minutes) before applying updates.
That way I have my previous system with all data, not just an image, all my data and going back in time.
From another thread:
if you have issues when using an AirPort router, you've either got interference issues causing your problems or a system issue.
whenever possible:
1) Vist an Apple Store
2) Try your machine on their network
3) If the connection drops, make them fix it.
Reason being, I've tried and checked log after log and have never seen a connection drop inside an Apple Store.
My gut reaction would be interference but the easiest move may be to check it in an Apple Store if at all possible.
http://discussions.apple.com/thread.jspa?threadID=2142725&start=225&tstart=0
If you connect to the Internet or a network in several different ways (using AirPort or Ethernet, for example), you can change the order of the network port configurations your computer tries when connecting to the Internet or a network.
To change the priority of a network port configuration:
1) Choose Apple menu > System Preferences, and then click Network.
2) Choose Set Service Order from the Actions pop-up menu.
3) Drag a service, such as Ethernet, to the top of the list. When you try to connect, Mac OS X will try the port configuration at the top of the list.©
Tip: Any Network Device listed here that you'll never use for a Network Connection should be set to 'Inactive'.

Issues with connection and Printer

Hi guys,
I have two issues going on, but one of them is not related to security but I want to through out there to see if anybody can answer it or suggest me an appropriate thread.
First question:
Can anybody tell me how set up a printer in ECC 6.0, Please tell me step by step. Its related with iw32 and printing. Please explain over all I never setup printer through SAP.
My another question is more of a Basis question since I cant find a basis thread Im posting here,
The developer trying to connect to courion but some how the Courion connector did not work so we added sap_all, sap_new to the courion ID but it worked once and then its not working again.
I was wondering if anybody has any idea about this. Please give me some thought or recommendation. (Courion is some other software)
Thank you so much for any help in advance

Replacing your wireless router now try.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3

Similar Messages

Maybe you are looking for