Monitoring on PO system

Hello,
I have a BPM PO scenario where I want track my message flow in Production. In the Manage process section I see that there is a button at the bottom left that says Show Related PI Messages for a particular process. When I click it , it says no PI messages available for this Process Instance, which is wrong as I can see messages in Message Monitror.
So my question in :
1. Is there a place where I can corelate the BPM process Instance and PI messages related to it ?
2. To get this button Show Related PI Messages working , do I need soem additional settings ?
Thanks in Advance
Pragya

Hello,
Check this note:
1919532 - NetWeaver BPM: Issue in Show Related PI Messages
Edit - In case you above note doesn't help u then check below reply from Markus
Monitoring Message across PI and BPM
Thanks
Amit Srivastava

Similar Messages

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

connect, then in SystemPreferences/Displays you can set the two as you want.

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble ?

We use win2003,win2008,win2012 servers.
I heard somewhere that Microsoft recommendation threshold of disk usage monitoring is ( free disk space >= 15- 20 %) , if I remember correctly, but how about CPU usage and memory usage monitoring ?
What are Microsoft- or other's-best practice or recommendation of Disk usage, CPU usage, memory usage monitoring to prevent system trouble and improve availability ?

Hi,
You can refer the following Performance Tuning Guidelines,
Performance Tuning Guidelines for Windows Server 2003
http://download.microsoft.com/download/2/8/0/2800a518-7ac6-4aac-bd85-74d2c52e1ec6/tuning.doc
Performance Tuning Guidelines for Windows Server 2008 R2
http://blogs.technet.com/b/josebda/archive/2010/08/27/performance-tuning-guidelines-for-windows-server-2008-r2.aspx
WINDOWS SERVER 2012 - PERFORMANCE TUNING GUIDELINES
http://blogs.technet.com/b/itprocol/archive/2012/11/27/windows-server-2012-performance-tuning-guidelines.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Rule based monitors (RZ20) - Show system availability for selected systems

Hi experts,
I'm new with CCMS monitoring and need an advice for rule based monitors.
I want to create three alert monitors (RZ20). One for our developing systems, one for our quality assurance systems and one to monitor our production systems.
For the start, I want to show data in each of this monitor for free space of the filesytems (MTE class: "FilesystemFreeSpace"), for users which are locked out (MTE class "R3SyslogSecurity") and for the availabilty of the ABAP systems (MTE class "Availability_SysPercent_ABAP").
I started to create the monitor for our developing system and got a problem. I started with the rule "CCMS_DEFINE_R3_SYSTEMS" to select our developing systems "HRT", "CRT" and so on. Under this nodes, I defined the mte classes ("CCMS_GET_MTE_BY_CLASS") which needs to be shown: "FilesystemFreeSpace", "R3SyslogSecurity" and "Availability_SysPercent_ABAP".
When I checked the results, I was able to see the free space of the filesystems and whether a user has been locked out. Unfortunately, I recognized that the availability is not shown. Instead there is the message "No MTEs currently available".
I'm aware, the availability cannot be shown on this way, since the agents are part of the central monitoring system and hence i need to choose the central system for "CCMS_DEFINE_R3_SYSTEMS". However I'd like to show the availability separated for each system under "HRT", "CRT" and so on. That means for example, there should me a node "HRT", which contains the free space of the filesystems, whether users are locked out, and the availability for the system.
It's not a problem to get a solution with a static monitor. I simply create a virtual node "HRT" and tick the checkbox under "<central system>, ..., <availability>, <hrt> ..."
However, I'd like to use rule based monitor to keep the effort at a minimum by not ticking thousand of check-boxes when I expand the monitored objects.
I also tried to use the rule "CCMS_GET_AVAILABILITY_FOR_SYSTEM", but it doesn't work and SAP documentations say "This rule is reserved by SAP for later use".
Does anybody know a solution for my problem?
In addition, I've got one more question concerning rule based monitors: If I want to create a monitor for my developing systems, I'll not be able to choose "<all>" for "CCMS_DEFINE_R3_SYSTEMS". Do I need to create "CCMS_DEFINE_R3_SYSTEMS" for each system separately? Or is there another possible way?
Thanks for your help in advance.
Bob
Edited by: Bob Norwich on Oct 17, 2010 12:04 PM
I read something about logical MTE classes: http://help.sap.com/saphelp_nw04s/helpdata/en/31/5462405c910272e10000000a155106/frameset.htm --> Does I need to use this?

Sorry Sean for my very late anwser.
I was very busy in my company.
Yes, I had tried you suggestion but it didn't work for me.
The problem is, that the Agent "CCMSPING" is part of the central monitoring system by definition.
Furthermore I tried to copy the default availabiliy monitor to look how it is definied. It didn't help.
I made the decision to define my monitor differently (an extra monitor for the availability for all system) and replace this temporalily solution when ""CCMS_GET_AVAILABILITY_FOR_SYSTEM" will be available.
The situation is not so bad after all.
Thx for your help. I appreciate it!!
Bob

I would like to known the cost of monitoring on-line system

I have a monitoring on-line system with the following features:
aquisition of 8 temperature channels and 6 vibration channels, storing data in databases,transmission on protocol TCP/IP, alarms etc...
But I do not known the cost of that systems in the market. I would like know which be the cost of a system like this?

There are specifics to your system features which will make the cost vary. One thing is, is this a system you want to build yourself or have developed for you by an Alliance Member. The costs of course being the time and resources and depending on the complexity of your application and in house resources you may be better served by an Alliance Member.
On your system cost from the standpoint of the hardware or software a number of factors may come into play. These include, your sampling rate requirements and accuracy requirement, if you have any special environmental needs (chambers, signal conditioning and so on).
On storing to databases, and using TCP/IP, and setting up alarms with pager or e-mail notifications these should be relatively inexpensive ... al
l depending on the specifics of your application (security, scalability).
Your best bet is to call an engineer at NI (http://www.ni.com/contact) that can get a clearer understanding of your needs and present you with different options.
Best of luck,
Kamran

Cannot monitor Windows Operating Systems

In the process of attempting a SCOM 2012 R2 deployment, I cannot get SCOM to monitor the Windows systems on which the management agent has been deployed. I have installed the "Microsoft Windows Server" MP, as well as a bunch of other "server"
related MPs (i.e., DNS, AD, etc.)
Selecting the "Microsoft Windows Server" entry in the monitoring view shows all the entries I would expect to see, but none of the selections show any data being collected. All of the Windows Updates have been applied and the systems rebooted.
I have searched this forum as well as the web, and haven't found anything that works. I'm wondering what I've missed.
BTW, the SCOM server is clearly having issues (see my other "Log on locally" thread) but I don't know if there is any connection. In other words, my SCOM deployment may need to be done over. (Although it is unclear to me just what tables
and other information would need to be removed from the SQL database.)
- Mark

Hi,
For the issue that Windows operating system not monitored, the cause may be not importing the Windows Server based OS management pack:
System Center Management Pack for Windows Server Operating System
http://www.microsoft.com/en-us/download/details.aspx?id=9296
Windows Server base OS monitoring is not a part of the default management packs shipped with SCOM, we have to download and import it.
In addition that, this issue can occur because the new agent has the same NetBIOS name as a previously installed agent. When the agent is deleted from Operations Manager, the grooming of the deleted agent is hard coded to occur after two days. Therefore,
the agent is not immediately groomed out of the database completely.
To work around this issue after the old agent is deleted from the console, wait three days, and then add the new agent to Operations Manager. Alternatively, make sure that two full days have passed and then add the new agent to Operations Manager.
Quote from:
http://support.microsoft.com/kb/979387/en-us
Hope this helps.
Regards,
Yan Li
Regards, Yan Li

Solman system configuration to monitor a ECC system

Hi Experts
I know theer is something called system monitoring in solman system.
Can you help me wtith the guide of solman 7.0 to do such configuration.
Cheers
Pooja

i have referred all these links.
but not what i wanted.
i am looking for a guide for system monitoring purpose.
to configure a ECC/NW to solman and monitor its performance.
Can any one help me in this.
Regards
Pooja

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

Monitor Turns off System Freeze

Hey everyone,
Unfortunately I am back with another problem. I had been running a very stable system with no problems for a very long time but recently my system developed a problem without any changes to hardware or software.
Randomly my monitor began to go into sleep mode (sometimes while running applications others while just running idle on the desktop). I would try and turn the monitor off and then back on again but it would go right back into the sleep state. The system would still be on (I dont know if it locked up or not, but i think it was). When I hit the reset button sometimes the monitor would come on and then would work fine for a boot or two before I would experience the problem again or the monitor would not start at all and the system hung in the boot process.
In a couple early instances I recieved an error message (in windows after a reboot) saying that there was a problem caused by my graphics card. So I swaped out the 6600gt with an older 16mb TNT2 with its older nvidia drivers. I am experiencing the same problems with that card.
also a couple times right as I restarted the computer after one of these problems I got a blue screen that said there was a problem and had to be restarted with more information but it always restarted before I could read any more of it.
Currently I removed one stick of ram to see if that has something to do with it.
Does anyone have an suggestions on how to go about fixing/diagnosing this problem?

Sorry Glenn, I should have read my own post. What I meant to say was that, I do NOT know how a bad monitor could cause boot problems.
After removing one stick of ram I have still experienced the problem. The monitor went black and the light on it went orange. If I unplug the monitor and plug it back in it turns on then goes right back into standby. I plugged in a very old monitor and was able to get a picture (although messed up from what I think is either a driver issue or a bad old monitor) but I was able to move the mouse around and open folders. So, the system does not freeze when the monitor shuts off. I then restarted the computer with the test monitor and it booted into windows fine. However, the computer then froze seconds later. I still had a picture however. I do not understand if this is a related issue (I am thinking yes). Nor do I understand what this all means. I am incapable of figuring out what in the world all of this could caused by. Do I try a new monitor? Is it the computer power supply? Even though the power supply is less than 6 months old. How could a monitor affect the system like this? If the power supply in the monitor was going bad why would it work for a couple days then have the problem then go back to working again?
UPDATE:
So, I turned my computer off to put back in the other stick of ram since that stick can't be the problem. When I tried to reboot the computer I immediately received a beep then another then another. One beep every 5 seconds. Additionally, only the number 1 light (top left) on the d-bracket was green. I reset the computer and got the same response. So i unplugged it for 15 seconds and then hit the power button and everything was fine.
This is very frustrating but, please someone help me! Thank you.

Please read the following diagnostics of hardware monitor for my system Macbook Pro

Following report was generated through "HARDWARE MONITOR" software run on my Macbook Pro:
CPU A temperature diode 43 degree
CPU core 1 45 degree
CPU core 2 -44 degress
enclosure bottom side -33 degre
enclosure bottom side 2 -32
degre
enclosure bottom side pos 3 -33 degre
main heat sink -37
northbridge position- 40
degrees
smart disk hitachi - 32 deghgress
smart battery- 33 degrees
CPU A temperature during system check was 75 degrees.
please suggest me if it is ok for my new system and whether it would be advisible to use software like "Hardware monitor" to generate such reports intermittantly or there is any other alternative

Welcome to Apple Support Communities
Temperatures are normal, so your MacBook Pro is working correctly. Fans will turn on automatically when temperature is high, so don't worry about that. If you see that fans don't turn on, reply back because it would be a hardware problem

Monitoring of remote system's Transactional RFC and Queued RFC

Hello,
In our production system, in rz20- CCMS monitor templates- Communication-Transactional RFC and Queued RFc- outbound queues- Queues otherwise not monitored we can see blocked queues for each client.
System is connected to solution manager and we wish the central auto reaction is implemented in solution manager
However i am unable to find Transactional RFC and Queued RFC for the remote system, they exist only for solution manager itself
Tell me how can i do the central monitoring

Hello,
First you need to check with your Landscape in solman in order to monitor any kind of activities to do so pls follow these steps.
Go to SMSY in solman under Landscape components>Product systemsselect you satellite system example SAP ECC.
On the main screen you will find client for which you have generated RFC connection. Please check though connection are working fine, Go to edit mode and try to click on generate button there will be a pop-up, which gives a clear picture of RFC connection which already exists, and you can also re-generate this RFC connection by clean it up when you re-generate pls select under Actions after generation assign RFC dest for system monitoring.
But make sure there is no project impact on this RFC, like they are not using any logical components and already have some projects running on this RFC connection.
I would advise you to first you the option of assign and check RFC button which is next to generate icon.
Regards
JUDE

Configuring ccms to monitor a remote system

Hi.
Im trying to configure my ccms system to monitor a remote epp 6.0.
As it is now, the epp has a ccms agent installed.
Question is:
how and where do I change the agent to send data to my ccms and not to the currently configured system.
and.
when I click "agent working dir" on the ccms system. (under agents for remote SAP system tab) I get this:
Cannot display information due to older age
I know this is sparse info, but what Im looking for are pointers to help me on the way...maybe someone has "the link" im looking for.
I have created an rfc to the remote system. A type T to program ID: host.sapccmsr.99 this hos is the reciepient of the agent data as it is configured now... this host now, collects all ccms data..what I want is, my system to get this info

Hi
I'm getting exactly the same error message when playing back the script I've recorded. Albeit in our SAP system (not BW system)
I'm in our Development System at the moment and want to reply back into the same System that I have created the eCATT in and created the recording to run the eCATT in.
Did you manage to resolve this?
If so could you share
Thanks
Steve

Monitor server running System Center Essentials

Hi,
At a customer site they have System Center Essentials, but they wish to use SCOM 2012 R2 for better monitoring purposes. However, they wish to keep SCE for other purposes, such as software deployment.
There are some key features on this server that must be monitored, but it is not possible to install an agent on a server running SCE. I know the workaround with SCSM - removing the console, install the agent and install the console - but it doesn't seem
that I can remove the console only from the SCE server.
Does anyone have any ideas?
Thanks

Hi,
Microsoft already announced that System Center Essentials won't have any future release.
It's recommend migrating from System Center Essentials 2010 to Configuration Manager + Operations Manager + VMM
For more information, please review the link below:
SCE 2010: Comparison & Thoughts
http://scug.be/sce/tag/scom/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Disable monitoring for non-system disks.

Hi all,
Our backup server dynamically mounts disks (with drive letters) when it's backing up a Virtual Machine.
These disks are giving a lot of alerts in our monitoring that we don't need, therefore we want to disable monitoring for these disks. What is the best way to disable monitoring for these non-system disks ? As I said, these disks are dynamically mounted and
unmounted ...
Any experience with this case ?
Kind Regards,
J. Monnens

This is a bit surprising, since the logical disk discovery only runs once a day, plus it's not supposed to discover network and removable drives.
That means that your disks are mounted when the discovery runs and that they appear as "real" logical disks...
Unfortunately there is no "sync time" parameter for this discovery, which would have allowed you to specify the time of the day at which the discovery runs; thus allowing you to set a time at which you know the drives are not mounted.
Is there any other parameter that could help identifying these specific disks, besides their letter, so you could add them to a dynamic group?
Otherwise, what you could maybe try is to create your own logical disk discovery based on the native one, but with specific settings that would exclude your drives and then disable the native discovery.
But this again implies that you have something that would let you identify specifically your mounted drives... Also the native discovery is a quite complex VBS, I wouldn't actually recommend disabling/modifiying it.
Maybe I could have another idea with more details about your environment...

Can the imac be an external monitor fr another system?

Hi, I am wonddering if the monitor portion of the imac can be used on a separate system. I am hoping to use it as an additional monitor for my laptop. This ould not be it's sole use but I would like to be able to do it occasionally. Is this possible?
Kalel

No, it does not have a vga input.
However,
If its a windows laptop, and you are not doing that requires video playback.
You can use windows remote desktop, which is similar to a vnc but gives you much better performance.
for example, I have been able to use photoshop remotely with acceptable performance, Microsoft word is almost as quick as running in on the physical machine.
The only things a vnc or remote desktop is not suitable for is video playback, games of course, intense graphics, and applications that make direct use of the audio hardware. (audio is redirected to the remote client)

Monitoring on PO system

Similar Messages

Maybe you are looking for