Monitoring standalone ABAP instances

Hi all,
I need some basic information and how to start guide to implement Alert Monitoring and configuring Auto-Reaction methods.
1. How can CCMS be configured on an ABAP system (w/o Solution Manager) ?
2. Is CCMS agent necessary for monitoring w/o solution manager ?
Please help me to find out good Articles and Blogs
Thank you all,
Nikhil Bose

Hi,
The CCMS monitor architecture (transaction RZ20) allows you to define
auto-reaction methods (reports, function modules) that are executed
automatically when alerts occur.
System Monitoring in SAP Solution Manager is based on the functions of
CCMS, so in order to get e-mails for the alerts you should make the
configuration of the auto-reactinos methods in CCMS (RZ20/RZ21).
If you SAP Solution Manager system in the Central Monitorng System (CEN)
you can define the methods as Central Auto Reaction methods directly
the Solution Manager; alternatively you can also define the methods
as local autorreactions in the satellite systems.
Please carefully read the documentation about the Monitoring
Architecture, the Central Monitoring System (CEN)a nd also see the
chapter "Configuring Alert Triggering and Alert Reactions"
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000
000a42189b/frameset.htm
Please also refer to following notes:
176492    Automatic email when an alert occurs (RZ20)
429265    CCMS monitor architecture: Central auto-reaction
939616    CCMS auto-reactions: Help with troubleshooting
110368    FAQ - CCMS MONITORING INFRASTRUCTURE
Hope this helps.
Cheers
SH

Similar Messages

How to log in to the new installed SAP ABAP instance ?

Dear Experts,
In SAP ERP 2005 installation,
I have done central system installation, Now I need to perform postinstallation steps,
Could you please tell me, how to log in to the new installed SAP ABAP instance and do the post installation?
Regards,
Madhavan K

Hi,
Check the list of post installation steps:
http://www.saptechies.com/post-installation-steps-for-ecc-60/
From my point of view basic post installation steps are:
- Installing SAP License (from http://service.sap.com/licensekeys)
- Setup TMS (STMS)
- Import profiles (RZ10)
- Client Copy (SCC*)
- Create users (SU01)
However further many steps are required as per your requirements. Cehck the link for more detailed steps.
Regards,
Srikishan

Abap Instance + Java Instance

Hi people,
In the sap netweaver 7.0 EHP1 SR1, it´s possible to make the installation firstly the abap instance (Business Warehouse), and after the installation has finished to do the installation the java instance (Enterprise portal) ?
In the installation guide
Installation GuideSAP NetWeaver 7.0 ABAP+Java including Enhancement Package 1 SR1 on Windows Oracle
In the new features says that:
New dual stack (ABAPJava) systems only for SAP NetWeaver Process Integration (PI) and SAP NetWeaver Mobile Infrastructure (MI) --> As of SAP NetWeaver 7.0 including enhancement package 1, you can install dual stack (ABAPJava) systems only with usage type Process Integration (PI) or Mobile Infrastructure (MI). This means you can only install a dual stack system either as a Process Integration system or as a Mobile Infrastructure system.
Installation option Java Add-In for ABAP disabled --> As of SAP NetWeaver 7.0 including enhancement package 1, the installation option Java Add-In for ABAP is disabled. That is, you can no longer install the Java Add-In to an existing ABAP system.
It´s possible??
More thanks

Hi Rubben,
That's true , with New relase of SAP we cannot install abap + java execpt for PI and MI due to some performance issues.
Even concept of java addin has been removed by SAP.
So, IF you want to install java with Abap , then you can fullful your requirement by installing seperate java instance .
Thanks
Anil

MDM 5.5 installed in Netweaver/Abap instance MCOD

Since MDM 5.5 install guide does not include Oracle as part of the installation (the installation is not SAPINST based), I installed MDM servers connecting to a netweaver/Abap instance that got installed separately, so in this case my MDM installation is MCOD. The installation was done using 2 separate Solaris containers, one for the Netweaver/oracle DB, one for the MDM servers.
This is working fine in DEV, QA so I'm planning to follow this architecture with my production system. Does anyone have a similar architecture?, if so I'd like to hear your experience and pain points.
thank you
Edited by: Hector Saavedra on Apr 26, 2010 10:59 PM

Moved to a different category.

In which folder can I find the abap instance profile?

Hi,
In which folder can I find the abap instance profile?
This is the parameter that I want to change:
"profile parameter em/address_space_MB = 250 in the instance profile"
Greets
Stefan

Hi Michal,
my actual problom is, that during the Java-Add-In-Installation an error appears. (CJS-20057)
j2ee-engine (dvebmgs00) do not start during this installation.
I also change the value of max. heap size and try a rebase as it is shown in note 129813.
nothing chances.
this error appears all the time.
can anybody help me please?
Thanks.
Greets
Stefan

Java Add-in on an existing ABAP instance

Hi, I uninstalled the ABAP instance before installing ABAP+JAVA. However, when I started sapinst to install JAVA Add-in (Step 1 of 3), it prompts for the profile directory and I no longer can find it under \usr\sap\<SID>\SYS\profile directory since the instance is removed. Is this the right way I am going?

"Keep in mind that you cannot(bold) install the Java Add-In for the dialog instance(s) of the existing ABAP system. Instead, you have to uninstall the old ABAP dialog instance(s) install new ABAP+Java dialog instance(s)."
looks pretty clear to me you can't add a Java add-in to a "Dialog instance"; This means that if you have a Central instance with ABAPJAVA and ABAP dialog instances you cannot install Java add-ins to them... you'll need to unistall the dialog instance and install and ABAPJAVA dialog instance... that connects to a already existing ABAP+JAVA Central instance.
Hope is clear now.
Regards
Juan
Please reward with points if helpful

OTO information not complete for non ABAP instance of system &1 in SMSY

Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban Hartzstein

Hello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein

Memory monitoring in ABAP debugger

Can anyone tell me the relevance of memory monitoring in ABAP debugger and and how to use it practically. I have searched the forums but did not find anything.

Hi Sameer,
If you choose the Settings pushbutton and select the Memory Monitoring radio button, or if you choose the menu Settings ® Memory Monitoring, the system will inspect the roll area of the current mode after every ABAP statement. This allows you to check whether neighboring memory areas have been overwritten.
The system checks of the memory segments in order to find the memory overwrites for each executed statement. SAP uses this settings internally to find potential kernal bugs. Turning on this setting significantly decreases application performance.
This internal setting is not relavent for ABAP developers.
please check this link
http://www.sappro.com/downloads/Settings&SystemAreas.pdf
http://help.sap.com/saphelp_nw70/helpdata/en/c6/617d0ce68c11d2b2ab080009b43351/content.htm
best regards,
raam

ABAP instance is hidden

Dear Experts ,
I was deploying j2ee patches on mysap ecc5 with abap and java add in system. At the time of deployment some error has come . I have stopped the doployment and restarted the server after stopping java and abap instance from windows MMC console.
Now when i have restarted and starting the instance ABAP and java , The abap instance (server 0) is not showing in the MMC Console . where it is gone ?
when starting the sdm through startserver.bat
it is giving following message
" SDM server not up after 5 seconds. Waiting for another 5 seconds "
this message is repeting again and again after 5 seconds and seconds are increased.
Pl. advice . what is the issue.
Thanks in advance
Sandy

Hi,
If not already, try re-registering SAPMMC plug-in with system libraries:
make sure you close all MMC sessions.
run "SAPSTARTSRV.exe -t from the command prompt and confirm the window without any changes.
Hope this helps.
Kalyan.

ESS/MSS sso configure between java and abap instance

Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best Regards

Hi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Check ABAP Instance or Java Instance

Hi
How to Check whether our SAP Server contain ABAP Instance or Java Instance ?
Regards
Gunjan

Hi,
1. Check with Tcode SM51
2. Check with RZ20
Regards,
Srini Nookala

Server Monitoring with clustered instances

Anyone using the server monitor or multiserver monitor with
clustered instances of coldfusion? In CF 8.0.1 on Solaris, enabling
monitoring produces a vast number of repeated errors of the form
included below. This occurs on the both clustered instances as the
instances are setup to replicate session data using J2EE session
variables. The monitoring appears to work but the frequency of the
errors produced in the ouput log of *BOTH* of the cluster instances
is extensive. These errors do not occur when monitoring the
"cfusion" admin instance. Is this a product issue or a
configuration issue?
MM/DD HH:MM:SS error Setup of session replication failed.
[2]java.io.StreamCorruptedException: unexpected end of block
data
at
java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1351)
at
java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
at
java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
at
java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at
java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at
java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at java.util.Hashtable.readObject(Hashtable.java:859)
...

Dear Jan,
Already I have added the plugin but while adding the target i am getting below error. Can u please give some idea on this
Test Connection failed: [_WinAuthDLLToLoadDynamicProp;em_error=DLL file 'D:\12c_agent\plugins\oracle.em.smss.agent.plugin_12.1.0.2.0\scripts\emx\microsoft_sqlserver_database..\..\..\..\dependencies\oracle.em.smss\jdbcdriver\sqljdbc_auth.dll' is found missing or not was never copied manually. Please copy amd64 version of sqljdbc_auth.dll at the above location and re-try, MSSQL_NumClusterNodes;Can't resolve a non-optional query descriptor property [dllFile] (dllFile), WbemRemote_Determination_DynamicProperty;Can't resolve a non-optional query descriptor property [dllFile] (dllFile), MSSQLInstance_TestMetric_DynamicProperty;Can't resolve a non-optional query descriptor property [dllFile] (dllFile), OSType_TargetHost_DynamicProperty;Can't resolve a non-optional query descriptor property [STDINWBEM_HOST] (ms_sqlserver_host), MSSQL_NumClusterNodes;Can't resolve a non-optional query descriptor property [dllFile] (dllFile)]

Routing a Portal user to a designated ABAP instance

Hi experts,
my concern is about performance testing in a portal landscape which is connected to several ABAP systems and a Producer Portal.
Because functional and performance testing will temporarily overlap, we consider to route our Mercury test users to a designated ABAP/Producer Portal instance in order to separate the load from funtional testing.
My question:
How can I ensure that the mercury test users get linked to the second ABAP instance/Producer Portal instance?
First ideas:
- Does it help to assign the test users to a specific user group which could be evaluated during SSO?
- Use of ABAP Logon groups without changing the System Object in the Portal;
- Taking advantage of the Load Balancer configuration.
Many thanks in advance and best regards,
Martin

The nice thing about loadrunner and other such products is also a headache... and that is handling the headers correctly. In the HTTP header you can set the load balance and session cookies to force the session to a particular place via a web dispatcher.
You need also to be aware RFC's from the Portal to the ABAP and these should use a logon group that you can force to the instance you desire.
It is also possible if going via a web dispatcher to hard code the web dispatcher to only have a single system.
In essence there are a few ways

One JAVA and multiple ABAP Instances

Hello All,
Till now i have done configurations for Billerdirect on one Java instance and one ABAP instance.
Now my situation in production we have multiple ABAP (1 CI + 4 Dialog) and only one production Java instance.
So in XCM configuration using method group_connect i have created XCM configuration this is working fine.
so here is our problem after doing this .
For self user Registration we have created JCO_RFC_Server in XCM this configuration is working only in one situation.
Since JCO_RFC_SERVER can be created only for one instance when ever self user registration goes to other instance it fails , which is happening frequently
Can anyone please help me understand in creating XCM configuration for multiple ABAP instances so that i can create multiple JCo_RFC servers.
Over View:
From one Java instance i want to establish multiple connection to ABAP (CI + DI) so that i can create one JCO_RFC server for each connection.
When i want to access system i will access using XCM connection name at the end.
eg some thing like this.
http://myserver:53000/bd/public/frameset_top_html.jsp?SYS=MYSYS1
http://myserver:53000/bd/public/frameset_top_html.jsp?SYS=MYSYS2
Please help in moving forward.
Thanks in advance.
Regards,
Vardhan.

Hello All,
Could you please help me in getting to an logical solution on this approach .
Thanks,
Vardhan.

Monitor the apps instance using EM Grid .

I have installed the EM grid control,How can I configure it in order to monitor the apps instance.
Please Guide me through some Docs .
Regards .

Hello
can you help me how to install grid for 11g right now our
OS is Oracle Linux enterprise 5.4
and our DB is 11.1.0 our APPS is R12.1.0
maybe i can help you in the future once i installed the 11grid.
or can you provide me your reference.
thanks

Monitoring standalone ABAP instances

Similar Messages

Maybe you are looking for