One JAVA and multiple ABAP Instances

Hello All,
Till now i have done configurations for Billerdirect on one Java instance and one ABAP instance.
Now my situation in production we have multiple ABAP (1 CI + 4 Dialog) and only one production Java instance.
So in XCM configuration using method group_connect i have created XCM configuration this is working fine.
so here is our problem after doing this .
For self user Registration we have created JCO_RFC_Server in XCM this configuration is working only in one situation.
Since JCO_RFC_SERVER can be created only for one instance when ever self user registration goes to other instance it fails , which is happening frequently
Can anyone please help me understand in creating XCM configuration for multiple ABAP instances so that i can create multiple JCo_RFC servers.
Over View:
From one Java instance i want to establish multiple connection to ABAP (CI + DI) so that i can create one JCO_RFC server for each connection.
When i want to access system i will access using XCM connection name at the end.
eg some thing like this.
http://myserver:53000/bd/public/frameset_top_html.jsp?SYS=MYSYS1
http://myserver:53000/bd/public/frameset_top_html.jsp?SYS=MYSYS2
Please help in moving forward.
Thanks in advance.
Regards,
Vardhan.

Hello All,
Could you please help me in getting to an logical solution on this approach .
Thanks,
Vardhan.

Similar Messages

Single DB Engine and multiple DB Instances approach

Hi Tech Arch gurus,
Need some advice from all of you. We are currently planning to install SAP training systems to latest versions.
We are getting recommendations to goahead with Dedicated host for Oracle Installation where we have Single DB Engine and multiple DB Instances for all different 7 SAP Servers (ECC6, CRM7, BI/NW7.3, SOLMAN7.01, SRM7, EP/NW7.3, PI7.1).
Certain things that need to be clarified before we go ahead with this:
1.     How complex/simple is this approach ?
2.     If there are some issues noticed in the future (Performance issues etc) in this landscape , how much effort will be required to migrate out a DB instance for an SAP product to another machine. We would be having both ABAP and Java stack for our systems.
3.     We would later plan for adding some more systems into the landscape like SAP MDM, SAP CE, SAP BPC etc. If we add all these systems with a single DB engine, would there be performance issues etc. (We are operating under assumption that underlying hardware of the DB engine will be powerful enough)
Can you please provide some expert guidance on this approach?
Your response would be much appreciated.
Thanks,
MD

As a consultant I never dared to do different from what SAP says in guides or notes, at least when it comes to PRD systems.
For QA and Test Systems, discussions might be needed with the customer, depending on how important these systems are,
and for sandboxes I already did some stuff, that will even scare some Oracle guys
As Stefan says, the technical setup is not that complicate at all.
But I never had to fight for a support call in a non-supported Environment, so I can't say.
I always decided to be on the safe side.
If you have your Oracle License directly from Oracle you might disscuss such special support issues with these guys.
The problem is: If you get a call, and the first level support guy from SAP spots the non-supported environment, it MIGHT be possible that you need to escalate and may be pay for the support, but I suppose they will not let your system die
May be some of the SAP moderator guys can throw a comment in on this.
Volker

Webdynpro Java and Webdynpro ABAP

hi all,
Im working in webdynpro java. Im confused about WD java and WD ABAP. which one we should select for what? And now a days people are telling that SAP is coming up all business packages in WD ABAP. Is it true? Which one is better either WD Java or ABAP?
Thanks,
J.Smitha.

Smitha,
It's tough question to answer. Which one to choose either Web Dynpro java or Web Dynpro ABAP , it depends on which technology you are comfortable. In relation to the business packages SAP already provided allmost all of them in java and in the future all the Business packages also available in ABAP. It's all how you want to develop the application. In sap portal world some applciation which we can develop with ABAP Web Dynpro and some applications with JAVA Web Webdynpro as SAP Web AS available as dual stack.
If someone already has a strong ABAP background and has WD for ABAP available they should probably use that. If they are a J2EE developer they should probably use WD for Java but it is likely they will also then need some ABAP support for the backend systems.
I think more customers may be asking for WD for Java projects simply because it has been around longer and is more widely available to customers where as some cutomers prefer to develop their application using ABAP Web Dynpro because of SAP propritary. But ultimately it's again all our interest and customer.
Thanks
Krishna

Is it possible to deploy SharePoint or its Service Applications on: multiple DB-Servers and multiple SQL Instances?

Hello Forum,
We have a SharePoint 2013 farm (Enterprise edition) that uses one single SQL Server 2012 (Standard edition). That statement means: All my SharePoint DBs e.g. (Config, Admin, Content, and Service Apps) DBs are hosted and running onto one single instance e.g.
Server1\SQLInstance1.
We have some new requirements to install and configure BI tools such as: PerformancePoint services and PowerPivot. BI tools require either SQL Server 2012 Enterprise or BI editions, and we do NOT want to upgrade our current SQL Server1\SQLInstance1
Instead, We have other separate SQL Server instance which is enterprise edition let's name it (ServerX\InstanceX) that is running standalone, and we are thinking or using it, and my 2 questions are:
1) Can we use this other separate
SQL Server instance which is enterprise edition to host the create and hosts the DBs of PerformancePoint services and PowerPivot ?
2) My second question is the same: Can I create PerformancePoint services application in my SharePoint farm, But in the Database Server field, I fill up
the details of the other DB server ServerX\InstanceX which is the one that is SQL
enterprise edition ? Will this work ?
Any official Microsoft resources/links tell that it is possible to deploy SharePoint or its service applications on multiple DB-Servers and multiple SQL Instances?

Thank you Alex and Anil,
What are the ramifications of that?
I mean, Assuming that I have created such a farm where most of SarePoint DBs in Standard SQL instance while the PerformancePoint service application and others e.g. PowerPivot and reporting service are deployed and configured onto other Enterprise SQL instance.
Are there any recommendations or concerns that you would like to draw my attention to ?

BI Java and BI ABAP -RSPLAN issue

Hi All
We are working with BI system ,using BI 7.0 Java and BI ABAP as separate systems on same host.
Already run the template intaller for BI Java and ABAP integration.
But facing some issue ,when going ot BI ABAP and RSPLAN and clicking the Start Mideller
it is opening a browser as http://host:8000/sap/public/myssocntl?sap-client-XXX
Since this is not correct and it should open BI Java portal instead of ABAP stack page.
Instead this should open a Url like this http://host:5XX00/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler?
I check on BI ABAP system under SAP Reference IMG -> SAP Customizing Implementation Guide-> SAP NetWeaver _> Business Intelligence-> BI Integrated Planning -> Settings for Starting the Planning Modeler.
There the default Url is BEx Portal Server and the url is
http://host:5XX00/webdynpro/dispatcher/sap.com/biplanworkbench1/Modeler
Can anybody let me know why this is going to ABAP server instead it should go to Java.
Regards
Ajay
Edited by: Ajay Sandal on Mar 10, 2009 2:31 PM

Hi Ajay ..
Good news that ur issue is resolved ..
I have somewhat similar issue .. Hopu u can put some light ..
I have Bi 7.o with Add on java ,
In RSPLAN from ABAP system , modular page is not coming . if i click on start moduler button in RSPLAN ..portal page is coming up and i have to give logging details .
Please suggest .
Thanks

Dev procedure out put display in PDF form is it same wd java and wd abap?

hi,
dev procedure out put display in PDF form is it same wd java and wd abap?
Thanks,
Rama

Hi,
for Web Dynpro Java, see
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/60/6fc10c6748479392101e09c9e8d33a/frameset.htm">this</a> and
for Web Dynpro ABAP, see <a href="http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/frameset.htm">this</a>
Regards, Heidi

One Oracle Application Server and multiple OC4J Instances

While we are getting new server (for development) we have to set-up a Development and Production enviroment for our project (dont have previous OAS installation) but on the same machine.
So, is a good option to have One OAS INstallation (Ora Home) and then create multiple OC4J instances, one for each environment (Development, QA and Production)?, is it possible? How to manage deployments between OC4J instances, simulating different contexts if they are in the same server and under the same HTTP Server? Will be there conflicts?

Hi,
you can do this and OracleAs will manage the different instances. The deployment can be done with Enterprise Manager in which case you select the OC4J instance first before deploying. If deploying from JDeveloper, you can specify the OC4J instance when creating the named connection
Frank

2004s BI Portal (BI-Java) and BI-ABAP: doublestack vs. separated stack

Hi specialists,
We plan to migrate our NW2004 System (no Portal in use) to NW7.0.
For the NW7.0 Portal Architecture we are not sure what to choose:
- BI-ABAP and BI Portal (BI-Java) on the same instance (doublestack)
- BI-ABAP and BI Portal (BI-Java) on seperate instances (separated stack architecture)
Medium term we assume, that the portal is used for Web-Reporting and integrated planning. The development of applications (Java, Visual Composer) will be the exception.
But if our reporting requirements changes and the number of own applications is increasing?
Which is the best possibility to be future-proof?
- Is it possible to separate the doublestack architecture later?
- Is it possible to "transport" Portal stuff/applications from a doublestack system to a separated stack system?
- If the number of Portal-applications is increasing, is it an opportunity to set up an additional BI-Portal which is connected to the doublestack BI system?
Thanks for your help.
Regards
Karin.

Hi
Too many questions .But its interesting.Ok lets take one by one.
You can have either of the options depending on the amount of data and your hardware.
I would suggest if you have the hardware go for seperate machines for each kind of installation.I mean have a BI system((dual Stack) + Portal or you can have portal on a seperate machine also.Then you can have another portal (single stack).And using the FPN(Federated Portal Network) concept you can actually implement ur scenrio.
Note :BI-Java cannot be installed seperately you need a portal for it.
Yes FPN can be used to transport the data from one portal to another.To the last questioin i have already answered ,its better to go for a seperate BI system.
Any other doubts feel free to ask:
Reward maximum points

Diff between XSL - JAVA and XSL - ABAP

Hi All,
What is the difference between the XSLT in JAVA and XSL in ABAP? which is the preferable one.

for
<b>XSL in ABAP</b>
refer these links
/people/sap.user72/blog/2003/09/18/xsl-and-abap
http://help.sap.com/saphelp_nw04/helpdata/en/09/b7463c32a3fe13e10000000a114084/frameset.htm
/people/achim.bangert/blog/2005/07/17/code-generation-using-xsl-transformations
/people/tobias.trapp/blog/2006/10/06/xml-processing-in-abap-part-9-150-abap-processing-using-xslt
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
for <b>XSL in JAVA</b>
http://help.sap.com/saphelp_nw04/helpdata/en/4c/b2ad3de2d76b3be10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
http://help.sap.com/saphelp_nw04/helpdata/en/ce/1d753cab14a909e10000000a11405a/frameset.htm
XSLT Mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
Java Mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
Links of blogs on java mapping...
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
Have a look at this blog on XSLT mapping in ccbpm:
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping(file to xslt mapping)
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners(xslt with java enhancement function)
XSLT Mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/73/f61eea1741453eb8f794e150067930/content.htm
and article on XSLT Mapping
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi%20code%20samples/generic%20xslt%20mapping%20and%20sample%20code.pdf
Java Mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/content.htm
Message Mapping:
http://help.sap.com/saphelp_nw04/helpdata/en/ee/bf9640dc522f28e10000000a1550b0/content.htm
this thread could give u a better understanding....
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FthreadID%3D40283%26tstart%3D25
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi(types of mappping in xi)
/people/sap.user72/blog/2005/03/15/using-xslt-mapping-in-a-ccbpm-scenario(XSLT mapping in bpm)
refer this thread
Difference in using java,xslt,message mapping
XSLT-transformation in Java-Mapping with javax.xml
Thanks !!!!

How to configure the connection between AS JAVA and AS ABAP

Hello,
I have installed a SAP Netweaver 7.3 AS JAVA and I would like to connect this JAVA Instance with 3 ABAP Systems (ECC 6.0) .
On help.sap.com I have found the following instructions: http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/0c4b428f96ab53e10000000a1550b0/content.htm
Could you please advise, if the above configuration steps are OK?
Or could you please help me with the exact procedure?
Thank you in advance!
Noemi

Noemi,
I'm not sure how exactly you want to use ABAP and Java so it is hard to answer your question.
The link that you posted describes the steps to configure ABAP as a Security Assertion Markup Language (SAML) service provider. As a service provider, the AS ABAP enables you to off-load the authentication of users onto an identity provider. The identity provider enables you to federate identities across domains for Single Sign-On (SSO).
Check the following wiki page for a good overview of all the ways that you could connect to ABAP
http://wiki.sdn.sap.com/wiki/display/ABAPConn/ABAPConnectivityHome
Regards,
Ventsi Tsachev

One IDP and multiple web applications

Continuing to look at the configuration necessary to enable SAML on my 2013 farm, I have two web apps which i would like to have SAML running on, both leveraging the same 3rd party IDP for authentication. As I dug into the various stages of configuration
there is a part that establishes the SharePoint site realm identifier...researching what this is for, i found an article by Steve Peschka (http://blogs.technet.com/b/speschka/archive/2010/04/27/how-to-create-multiple-claims-auth-web-apps-in-a-single-sharepoint-2010-farm.aspx)
in it he talks about if you have one IDP but multiple web apps that must use that IDP.
Am i correct in understanding that when steve mentioned "You can only associate a token-signing certificate from an STS with one SPTrustedIdentityTokenIssuer." That the TS cert I import from my IDP is unique and is only able to be linked to one
Web Application...unless i create a URI that makes Sharepoint aware of the additional web app?
Going further...I can't just import another copy of the TS cert and set it to another name unique from the first one?, once this is done i could then create a new unique realm for that additional web app with that other cert. Then when configuring the web
apps it would list two IDP's for me to choose from and i would assign them individually to on or the other.
His article covered 2010 not sure how 2013 works with this stuff...new territory for me here so forgive my lack of knowledge on how this all comes together.
Also, is there some sort of configuration necessary for Office web apps farm to work with SAML or is that handled through S2S communication and is beyond SAML?

Right, so your IDP will have a single certificate which will be single-instanced on the SharePoint farm. Steve's article is accurate for SharePoint 2013 and I've used this method with ADFS. It should be no different, on the SharePoint side, with other IDPs.
WAC is beyond SAML. The S2S/JWTs take care of it.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Content Conversion: One row with one header and multiple item structures. Possible?

Dear all,
I have a input that looks like this:
HeaderKeySomeHeaderInformationItemKeySomeItemInformationItemKeySomeItemInformation...
Here's the actual input
TEHGMESS0026000000288S0001TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000JTEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
HeaderKey = TEHGMESS
ItemKey = TEI2____
Is it possible to process this via MessageTransformBean (my actual scenario is JMS to IDoc)? I already tried but I only succeeded when having new lines in my input to separate between Header and (multiple) Items.
So when the input and my configuration looks like below it works, but when I only have a single row input it doesn't work, even when specifying xml.recordHeader.endSeparator = '0' / xml.recordItem.endSeparator = '0'. I even tried xml.endSeparator = '0' but no luck.
Input that works
TEHGMESS0026000000288S0001
TEI2____026200006112410400000000           18010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
TEI2____026200006112410400000000           19010000000000                                                      00126000000000126000120600000000002000000000                                    000WESTMONOBERTBE2014052309422408120003 000000000000000000000000000000J
Matching configuration that works for input which structures are delimited by new line.
Paramentername
Parametervalue
Transform.Class
com.sap.aii.messaging.adapter.Conversion
Transform.ContentType
text/xml;charset=utf-8
xml.conversionType
StructPlain2XML
xml.documentName
MT_TEI2Split
xml.documentNamespace
http://hansgrohe.com/pi/MQ/TEI2/10
xml.keyFieldName
SATZARTKey
xml.keyFieldType
CaseSensitiveString
xml.processFieldNames
fromConfiguration
xml.recordHeader.fieldFixedLengths
8,4,9,1,4
xml.recordHeader.fieldNames
SATZARTKey,SATZLENHG,NUTZLEN,MESSAE,MESSNR
xml.recordHeader.keyFieldValue
TEHGMESS
xml.recordItem.fieldFixedLengths
8,4,2,10,8,19,3,3,2,10,6,2,10,6,2,10,6,6,6,6,6,11,9,2,10,6,2,10,6,3,4,3,7,14,8,1,31
xml.recordItem.fieldNames
SATZARTKey,SATZLEN,BUCHART,TRNR,ANDGNR,MITEM,TEIVARI,BSTSTATU,REFTYP,ORNO,POS,REFTYP1,ORNO1,POS1,CHATYP,CHARGE,CHAPOS,ABBVONL,ABBNACH,ZUBVONL,ZUBNACH,I2MENG,I2BUNR,REFTYPN,ORNON,POSN,REFTYP1N,ORNO1N,POS1N,BSTSTATN,ABUSERAB,ABUSERFN,ABUSERNA,I2TIME,I2LIDNR,I2FMCODE,FILLER
xml.recordItem.keyFieldValue
TEI2____
xml.recordsetName
records
xml.recordsetStructure
recordHeader,1,recordItem,*
Any clues on this? Is it even possible to have multiple structures in one row? Many thanks in advance
Jens

SAP came back to me with this answer:
First, I would like to point the documentation for Message Transform
Bean (MTB) in 7.4:
http://help.sap.com/saphelp_nw74/helpdata/en/57/0b2c4142aef623e10000000a155106/content.htm?frameset=/en/57/0b2c4142aef623e10000000a155106/frameset.htm&current_toc=/en/45/0ea2de423c2d6be10000000a11466f/plain.htm&node_id=18
As it is written at the beginning of this document, MTB is used to
call classes written for the Plain Adapter Engine. So you may find
additional documentation about the parameters for convertion in the
documentation of the Plain Adapter Engine
(http://help.sap.com/saphelp_nw74/helpdata/en/0d/00453c91f37151e10000000a11402f/content.htm?frameset=/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm&current_toc=/en/75/246b3de666930fe10000000a114084/plain.htm&node_id=11).There it is written that the structures by default are
arranged line-by-line. The endSeparator just adds additional character
string as a separator after the last column in a row.
I hope that this answers your question. MTB expects the data to be
structured line by line.
You may add a custom module, which transforms the message in the
expected format.
If you have a look at the second link there's even a more precise wording that multiple structures within one line are not supported:
xml.NameA.endSeparator
Even if no specification is made here, a line break must follow since substructures are always expected as a line of the document.
Bottom line is that it's not supported by now and verfied by me with PI 7.4 SP5
Many thanks to Ambrish, Amit and Hareesh for the valuable input. Will probably try to work things out for now following Ambrish's / Hareesh's suggestion as this seems easier to implement. Amit's proposal with a dedicated module however would probably be the more polished solution.
Cheers
Jens

ALV for one header and multiple item table

Hello All,
I have a requirement to display records from one header and three item table using ALV.
The output should be such that
     1-line - record from header table
     followed by - records from the 1st item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
     followed by - records from 2nd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
     followed by - record from 3rd item table(can have multiple entries corresponding to a header record and each should be displayed on separate line)
Can you help me out.
Thanks and regards,
Subramanian.

hi
data population is same for alv or normal reporting.
First you select the data from header
          select from item data using for all entries in it_header where....
          select item 2
          selct item 3
loop a it_header
read item1
read item2
read item3
check sy-subrc
move to i_final
then build fieldcatalog and display..
look the example
SELECT   PERNR
           STELL
           WERKS
           ABKRS
           ENAME
           ENDDA
           BEGDA
           ORGEH
           PERSG
           PERSK
           KOSTL
      FROM PA0001
      INTO TABLE I_PA0001
     WHERE PERNR IN S_PERNR
       AND ABKRS IN S_ABKRS
       AND PERSG IN S_PERSG.
SELECT SPRSL
            STELL
            ENDDA
            STLTX
            FROM T513S
            INTO TABLE I_T513S
            FOR ALL ENTRIES IN I_PA0001
            WHERE STELL = I_PA0001-STELL AND SPRSL = 'EN'.
    SELECT PERSA
            NAME1
         FROM T500P
         INTO TABLE I_T500P
         FOR ALL ENTRIES IN I_PA0001
        WHERE PERSA EQ I_PA0001-WERKS.
LOOP AT I_PA0001 .
READ TABLE I_T513S INTO WA_T513S WITH KEY STELL = WA_PA0001-STELL
                                              SPRSL = 'EN'
                                              ENDDA = WA_PA0001-ENDDA.
    IF SY-SUBRC IS INITIAL.
      MOVE WA_T513S-STLTX TO WA_FINAL-STLTX.
    ENDIF.
    V_SNO = V_SNO + 1.
Read Value For Personal area Text.
    READ TABLE I_T500P INTO WA_T500P WITH KEY
                            PERSA = WA_PA0001-WERKS.
    IF SY-SUBRC EQ 0.
      MOVE WA_T500P-NAME1 TO WA_FINAL-NAME1.
    ENDIF.
FORM DISPLAY_DATA .
--BUILDING FIELD CATALOG--
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     I_PROGRAM_NAME               = V_REPID
     I_INTERNAL_TABNAME           = 'I_FINAL'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
     I_INCLNAME                   = V_REPID
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
    CHANGING
      CT_FIELDCAT                  = I_FCAT[]
   EXCEPTIONS
     INCONSISTENT_INTERFACE       = 1
     PROGRAM_ERROR                = 2
     OTHERS                       = 3
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*--Modifying titles of Field Catalog--
READ TABLE I_FCAT INTO WA_FCAT WITH KEY FIELDNAME = 'S_NO'.
IF SY-SUBRC EQ 0.
    WA_FCAT-REPTEXT_DDIC = 'X'.
    WA_FCAT-SELTEXT_S = TEXT-041.
    WA_FCAT-SELTEXT_M = TEXT-041.
    WA_FCAT-SELTEXT_L = TEXT-041.
    WA_FCAT-OUTPUTLEN = 3.
    WA_FCAT-JUST = 'L'.
    MODIFY I_FCAT FROM WA_FCAT INDEX SY-TABIX.
    CLEAR WA_FCAT.
ENDIF.
do for all the fields u want to display..
Award points if useful.

Blazeds server push and multiple flex instances

I am working on a project to push data from a server to a
flex chart drawing application. However each chart needs to run as
its own page. Up til now I've been using messaging and creating a
single flex app to consume the data when it comes and to draw the
chart. But I need this to be done separately for multiple charts.
So my question has two parts:
1) How do I get the server to spawn a new instance of my
chart app for each chart dynamically (because over time, the java
app will be defining new charts)
2) How do I send the chart data only to the specific
application that is dedicated to drawing that chart? (right now,
I've been defining the message channel in the xml config files and
I obviously can't create a new channel definition for each separate
chart dynamically as new charts definitions are created and
requested by users)
I hope that makes sense. I'd really appreciate help on this
since I am really uncertain how to proceed with this from
here.

I still have not found anyone who knows how to do this. I
need to spawn a separate instance of my application for each java
thread. Right now, when it launch flex, it always launches in the
same window so whichever thread happens to be the last to spawn is
the one that ends up getting written.

Start both Webdynpro JAVA and WebDynpro ABAP from UWL

Hi all:
We are facing a situation. We need to start both JAVA dynpro and ABAP dynpro applicaiton from uwl. The JAVA dynpro application is the ESS absense request. And we also developed other workflow which use ABAP dynpro as work item . The problem is when we regist our ECC system to UWL, the system can only provide WAS java information or WAS ABAP. So there are alway one type of our work items can't start correctlly. How can I modify the UWL configuration to meet our requirement?
Anyone knows please notify, thank you very much!
Wayne

Hi,
when you try to register backend system , you will choose system alias which was already existing in the portal which has WAS hostname and port.
that is sufficient. Based on visualzation parameters , you can launch webdynpro abap/java tasks.
check below article
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/using%20web%20dynpro%20java%20and%20web%20dynpro%20abap%20applications%20in%20universal%20work%20list.pdf
Regards,
Koti Reddy

One JAVA and multiple ABAP Instances

Similar Messages

Maybe you are looking for