More functional program error-please help help

Hi
how do I install acrobat when both acrobat pro 8 and 9 say that there is a more functional program installed ....does anyone know how to solve this without reinstalling my whole system for operating system up.
there must be some very clever acrobat users that have solved this
regards
Ross

Hi Mike,
thanks for attemting to resolve this perpexing bug from adobe.
I dont think deactivation was an issue because I I hadnt activated it.
I have cs4 master collection installed and have been trying again with adobe 8 and abobe 9 pro ext but no success.
I also tried uninstalling aver adobe product and then using an uninstalled to remove anything it could find the microsoft installer cleanup ....the problem with the microsoft one is it want to go to work on office 2007 and surely abobe is an add on to office not the other way round.
Ross

Similar Messages

  • Acrobat 9 pro more functional program error

    Hi all
    I have a feeling this is a reaccuring post and i am amazed that adobe wont release the patch or the information to fix it.
    Countless hours by installers and techs must be spent on this trying to work around this issue.
    If there is some genius Acrobat speciallist that can help I would be very grateful.
    I have deleted everything on my system with a pro uninstaller and registry cleaner plus manual checks the has acrobat references.
    The stupid program still stops and exits with the same annoying error ....ie it has found a more functional program and will exit ......"what the F*** is a more functional program" who at adobe thought of this genius bit of programming ....wow......
    Anyway thats me done ..... I even tried Adobe telephone support but they are in some little island country somewhere and have noooooo idea.

    Hi Mike,
    thanks for attemting to resolve this perpexing bug from adobe.
    I dont think deactivation was an issue because I I hadnt activated it.
    I have cs4 master collection installed and have been trying again with adobe 8 and abobe 9 pro ext but no success.
    I also tried uninstalling aver adobe product and then using an uninstalled to remove anything it could find the microsoft installer cleanup ....the problem with the microsoft one is it want to go to work on office 2007 and surely abobe is an add on to office not the other way round.
    Ross

  • My CS6 photoshop started showing cannot perform function programming error then it started freezing please help?

    My CS6 photoshop started showing {cannot perform function programming error}
    then it started freezing please help?

    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • HT3702 error please need help

    Dears,
    I want pay for gems from clash of clan but the msg error please need help this problem take long time with me please please help me.
    Regards,

    If you haven't already done so then you can contact iTunes Support via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why it's appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Program error please help me

    I have been using PS elements 8 on for a year with no issues,  yesterday when I tried to save for web after editing I got this message:
    Could not complete the export command because of a programme error.
    I then downloaded a trial of PS elements 9, but the same thing happens with this also.
    I have done the shift,control, alt on PS start up on both elements 8 and 9 but the problem still remains,  I have also upgraded windows vista today hoping that would solve it and then repeated the shift,control, alt on PS start up but it still is not fixed.  I have run all comprehensive norton scans and fixes but nothing.
    Please is there anybody that can help me,  I am not a techy and I need things explained to me very simply.  Thank you to anybody in advance that could possibly help me.

    It’s possible this is a Windows Vista problem, notably 64 bit, rather than an Adobe problem.
    Are service pack’s 1 & 2 installed?
    Has the registry become corrupted?
    Have external or removable drives been used for saving files?
    When examining the registry it sometimes points to a drive that has been removed, is unplugged or otherwise not functioning. The save for web plug-in remembers the last save location which should ideally be on one of the partitions on the main machine.
    It might be worth checking the registry but I would only advise amendments if you know what you are doing. The conventional set up pointing to root media directories should be like this:
    My Music REG_EXPAND_SZ %USERPROFILE%\Music
    My Pictures REG_EXPAND_SZ %USERPROFILE%\Pictures
    My Videos REG_EXPAND_SZ %USERPROFILE%\Videos
    Personal REG_EXPAND_SZ %USERPROFILE%\Documents
    etc.
    You can check this by clicking the start button and typing regedit in the search box. Click on the resulting file to open the Registry Editor dialog and agree administrator permission if necessary. On the left click on the folder:
    HKEY_CURRENT_USER and navigate to User Shell Folders
    The full path is:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  • More Stub/unmarshalling errors - please help

    Dear all,
    I'm having great trouble getting an RMI application application to work.
    Basically, I have the RMI server on a Sun, and the client on a W2k machine. I compile the stuff on the Sun machine as normal, use rmic etc.
    In a new shell window, I type "rmiregistry".
    Then in another new shell, I type
    "java -Djava.rmi.server.codebase=http://joint-elt/ -Djava.security.policy=permit eltServersideConnection"
    (joint-elt has the IP address 10.16.58.7, and the permit file simply grants access to everyone). My generated Stub.class is in the htdocs directory of my apache server (running on port 80), and can be downloaded using a web browser, ftp etc., by typing http://10.16.58.7/ in IExplorer etc.
    On my client machine, if I type "java rmiserver 10.16.58.7" (where I have the target IP address as an input argument, and rmiserver is the connecting application), I get:
    "error unmarshalling return: nested exception is:
    java.lang.ClassNotFoundException: eltServersideConnection_Stub (no security manager: RMI class loader disabled)"
    If I have the stub file in the same directory on my client machine, then this will work, as it doesn't have to download it from the server.
    I also get the same problem if I specify port numbers 80, 2001 (rmi port) in the URLs above.
    In my server side implementation, I create a new RMISecurityManager(),
    so what is going on?
    Thanks for all your help
    Paul

    OK...here goes....first of all, I've done a printenv on my server machine and I can't find any reference to the CLASSPATH. Hmm.
    The Sun machine has an interface to a graphics routine that we
    use, and we are trying to control it remotely, hence the use of RMI.
    Right, on the Sun, this is what I do:
    create a policy file in the directory (open access):
    javac *.java
    rmic eltServerSiceConnection (this is the server side class that contains main(), sets up the SecurityManager, and implements the interface class)
    copy the generated eltServersideConnection_Stub.class into the root directory of my webserver (apache, listening on port 80).
    Start httpd if not running already.
    cd into the source/compiled file directory
    run rmiregistry
    open another shell and cd into this directory:
    run
    java -Djava.rmi.server.codebase=http://joint-elt:80/ -Djava.security.policy=permit -Djava.security.manager eltServersideConnection
    (I don't bother with -cp as I don't have a classpath set up)
    (joint-elt is the name of the server, IP is 10.16.58.7)
    I get the message that eltServersideConnection is bound in the registry.
    Now, on the CLIENT machine, I do the following:
    javac *.java (including the interface file, which is common to both server and client)
    create a security policy file (again, allow access to all).
    run the following:
    java -Djava.security.policy=permit -Djava.security.manager rmiserver2 10.16.58.7
    (where rmiserver2 is my client side code and I specify the IP address of the target machine as an argument).
    And then I get the access denied message!
    ArgggggGGGGgGgghhhhhh!

  • TS3297 I cannot open my itune - shows Error 7 windows error 193) and say reinstall itunes which I then cannot do due to the error - please anyone help?

    Having trouble accessing iTunes on my computer - Message keeps saying    'Error7 (Windows error 193) iTunes not installed correctly. Please reinstall iTunes'  - I have tried this but I cannot as keeps coming up with error message - I havent changed anything on the computer just tried to plug in my iphone5 this morning - please can anyone help me in the simplest of terms please.

    Hey there Px13,
    It sounds like you are getting an error message after a recent iTunes update. I recommend the troubleshooting in the following article named:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    It will involve uninstalling iTunes and its associated applications. The links in the article will walk you through uninstalling them all.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Unable to use Redlining in EAI Viewer due to Program Error...HeLp...

    Dear All,
    I am trying to use the redlining function but it is giving a ABAP dump which says
    The current ABAP "CL_ABAP_CLASSDESCR============CP" program had to be terminated because the ABAP processor detected an internal system error.
    Does any one had similar errors, i found a note for this 1021125 it is applicable for Sun Solaris x86/64 platform we are using the same platform so i just wanted to know is this note relavant to it since it has 2 patches to be applied.
    We are on ERP 2005, ECC 6.0.
    Regards
    Tushar Dave

    Hi,
    Please raise the OSS message.
    Regards,
    Bala.c

  • How do i get my wifi to work again on my ipod touch . it says no wifi and wont let me turn it on .. says something bout the VPN error, please anyone help

    my wifi dont work or even trys to find or turn on ... something bout the VPN error .. how do i connect to VPN? thinking that will let my wifi work?

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Setup problem please anyone help ~~ me !!!

    i was trying to setup adobe photoshop and i clicked setup.exe (file picture display like as a white paper) and it told me to choose application. so i dont know how to change or choose which program .. please anyone help me out on this..

    Photoshop is an application that must be purchased (not available via a download) and isn't cheap.
    You must purchase the OS X (Tiger compatible) version of Photoshop.
    Check Apple's online store under software or do a Google search.

  • Brbackup command is sometimes failing with function remove() error.

    Hi All,
    while taking brbackup using 3rd party tools, getting error like;
    BR0252E Function remove() failed for '/mnt/st_v_data1/CER/sapbackup/.bdvqdoqt.lst' at location BrUtilCall-1
    BR0253E errno 4: Interrupted system call
    BR0231E Backup utility call failed
    Console Output
    bash-2.05$ brbackup -d util_file_online -m all -t online -c
    BR0051I BRBACKUP 6.40 (40)
    BR0055I Start of database backup: bdvqdoqt.anf 2007-07-05 06.14.27
    BR0280I BRBACKUP time stamp: 2007-07-05 06.14.32
    BR0319I Control file copy created: /mnt/st_v_data1/CER/sapbackup/cntrlCER.dbf 3579904
    BR0280I BRBACKUP time stamp: 2007-07-05 06.14.33
    BR0057I Backup of database: CER
    BR0058I BRBACKUP action ID: bdvqdoqt
    BR0059I BRBACKUP function ID: anf
    BR0110I Backup mode: ALL
    BR0077I Database file for backup: /mnt/st_v_data1/CER/sapbackup/cntrlCER.dbf
    BR0061I 22 files found for backup, total size 708.578 MB
    BR0143I Backup type: online
    BR0130I Backup device type: util_file_online
    BR0109I Files will be saved by backup utility
    BR0142I Files will be switched to backup status during the backup
    BR0126I Unattended mode active - no operator confirmation required
    BR0252E Function remove() failed for '/mnt/st_v_data1/CER/sapbackup/.bdvqdoqt.lst' at location BrUtilCall-1
    BR0253E errno 4: Interrupted system call
    BR0280I BRBACKUP time stamp: 2007-07-05 06.14.33
    BR0231E Backup utility call failed
    BR0056I End of database backup: bdvqdoqt.anf 2007-07-05 06.14.33
    BR0280I BRBACKUP time stamp: 2007-07-05 06.14.35
    BR0054I BRBACKUP terminated with errors
    Please need help
    Thanks & Regards
    Bhaskar

    Thanks for your response Fidel
    I'm executing the backup from this script
    C:\usr\sap\PRD\DVEBMGS02\exe\brbackup.exe -u / -p initPRD.sap -d disk -t online_cons -m all -c force
    Drive e: is not a drive shared over the network. It  is an external USB disk attached to the server running SAP. I've given user SAPSERVICE<SID> full rights to drive e:
    2) change the fixed "drive" letter to UNC name (like
    <server>\<directory_path>
    When I use UNC name in place of the drive lettter I get the error message below
    #backup_root_dir = E:\prd_oracle
    backup_root_dir =
    NXXX-HX-PXD1\prd_oracle
    BR0259I Program execution will be continued...
    BR0051I BRBACKUP 7.00 (42)
    BR0282E Directory '
    NXXX-HX-PXD1\prd_oracle' not found
    BR0182E Checking parameter/option 'backup_root_dir' failed
    BR0056I End of database backup: behmicld.log 2011-12-21 12.11.37
    BR0280I BRBACKUP time stamp: 2011-12-21 12.11.38
    BR0054I BRBACKUP terminated with errors
    BR0292I Execution of BRBACKUP finished with return code 3
    BR0668I Warnings or errors occurred - you can continue to ignore them or go back to repeat the last action

  • Cannot open files ~ Could not complete your request because of a program error

    I can inly open 3 files and then I get this error message ~ Could not complete your request because of a program error
    Please help, I am in the middle or a project ...
    Thank you,
    Linda

    There is likely a font on that system that's corrupted or for some reason Photoshop just can't deal with.  Fonts are complex things, and it's well known that bad fonts can crash applications.
    Ferreting out such a font is normally a matter of removing all but the default fonts, seeing that the problem is corrected, then adding the fonts back in systematically until the offender is isolated.  Yes, this can be tedious.
    If it's not a font problem, there's a possibility it's a display driver problem.  To help diagnose that, go into Edit - Preferences - Performance, disable OpenGL Drawing, then restart Photoshop.  If the problem goes away, you'll want to check the web site of the maker of the video card for driver updates.  Don't forget to re-enable OpenGL Drawing again after updating the driver.
    Good luck.
    -Noel

  • BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS

    Hi, I'm trying to run a payment batch using payments manager and encountered this error.
    In my test data I used two suppliers that belongs to the same operating unit.
    Payments: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    IBYBUILD module: Build Payments
    Current system time is 09-NOV-2009 11:26:11
    **Starts**09-NOV-2009 11:26:11
    **Ends**09-NOV-2009 11:26:13
    BUILD PROGRAM ERROR - CANNOT CREATE PAYMENTS
    Start of log messages from FND_FILE
    IBY_PAYGROUP_PUB.performPostHookProcess: Fatal error - Payment count mismatch after hook operation. # payments passed to hook: 1, # payments returning from hook: 2
    IBY_PAYGROUP_PUB.performPostHookProcess: Aborting program ..
    End of log messages from FND_FILE
    Executing request completion options...
    Finished executing request completion options.
    Exceptions posted by this request:
    Concurrent Request for "Build Payments" has completed with error.
    Concurrent request completed
    Current system time is 09-NOV-2009 11:26:13
    Please help
    thanks,
    Renz

    Hi
    Please review the below note from Metalink,
    Bug No. 6771847
    Filed 24-JAN-2008 Updated 13-MAR-2008
    Product Oracle Payments Product Version 12.0.4
    Platform Linux x86 Platform Version ENTERPRISE 4
    Database Version 10.2.0.2 Affects Platforms Generic
    Severity Severe Loss of Service Status Closed, Verified by Filer
    Base Bug N/A Fixed in Product Version 12.0.4
    Problem statement:
    R12: AFTER APPLYING 12.0.4 BUILD PAYMENT PROGRAM ERRORS
    please review the same if it resolvs your error.
    Thanks
    Manish Jain.

  • Program error using quick selection tool

    When I try to use the quick selection tool in PS4, I get the message that it is not available because of a program error. Any help on this?

    when Photoshop starts acting up it's always a good idea to reset your preferences
    http://forums.adobe.com/thread/375776?tstart=0

  • Photoshop CC program error when opening or placing files. VERY FRUSTRATING PLEASE HELP.

    I'm an advertising graduate student that relies heavily on Adobe programs for my multiple simultaneous projects throughout the school year, specifically Photoshop, Illustrator, InDesign, Muse, Edge Animate and Premiere Pro.
    I'm using a MacBook Pro running OS X Yosemite.
    I have been experiencing an incredibly frustrating issue with Photoshop and Muse, both CC 2014. I'll speak about Photoshop in this thread since, well, this is a Photoshop forum. This has been happening for almost a year now. I figured Adobe would've fixed this problem by now, especially given the myriad of crash reports I send.
    While working in Photoshop, sometimes when I go to place a file I get an error message that says "Could not complete your request because of a program error." It used to be that this error was fatal and I would have no other choice but to force quit out of Photoshop and restart it. We all know how incredibly time-consuming it is for Photoshop to open (especially 10-15 times in one sitting), and being in grad school, time is not something I have a lot of when I have deadlines and projects due.
    This error is still happening and for the same reasons; however, now I can still continue to work on my file, as long as I don't need to open a document or place an image...which doesn't help very much because I'm doing a lot of mockups and composites and need those functionalities. It happens probably 90% of the time when I try to place or open a document.
    For the record, it's a similar issue that's causing Muse to crash as well. When I try to add an image file, it causes the entire program to crash "unexpectedly," as Muse so eloquently puts it.
    Until recently I had kept CS6 on my hard drive and would dig it out to use in place of CC when PSCC would crash; however, someone told me that having both versions was likely the cause for the crashes. After much hesitation, I finally uninstalled all of CS6 from my hard drive the other day (the right way, not into the trash can, since someone is inevitably going to ask that question) and I'm still having this problem, and now I don't have my CS6 version to fall back on and now I'm in a really bad spot.
    I apologize for all the rambling, but I'm really very, very frustrated with this error, and I had to do something while waiting for Photoshop to restart. Someone please help.

    MacOS 10.10? Yeah, Apple is working on that bug.  They already fixed the crash in the open/save dialogs, but have a few more problems to address with the open/save dialogs.

Maybe you are looking for