More than one employee in a position

Hi HR experts,
I've a question - Can more than one employee be assigned to a position in HR Org structure?
Thanks in advance and regards,
Asheesh Gupta

Hi,
We can do that.
Condsider a case -
For a same position we have one full time employee and one part time employee.
Full time consumes 70% of the position and part time the rest 30%.
We can have more people sharing the same position but over all percentage should be 100 only.
Regards,
Amit
Reward all helpful replies.

Similar Messages

  • Assign One Position to More than one Employee Subgroup

    Dear Gurus,
    Please is it possible to assign one position to more than one employee subgroup?
    Secondly, I have a case here where employees in a particular cadre called Junior staff have different leave quota based on no particular criteria. This means that two people can be assigned to one position and have different leave quota based on Union agreement. If I create one employee group for all those positions who fall in this particular cadre, it would be difficult to generate their leave quota since I can only create generation rules by Seniority and age. And if I decide to create all the groups there are by the leave quota each group can get, I am still constrained by having 2people assigned to one position yet entitled to different quota. Please how do I go about this?
    Your suggestions will be greatly appreciated.

    Hi Rhoda,
    as to your second point: a solution for this was delivered as part of the SAP customer connection program,e last year in note 816423
    This allows you to manually influence the grouping of the employee to have an additional criterion to determine leave entitlement.
    AS to your first point: I can't quite see, what the purpose could be. Sure, you could change time dependencies accordingly, so more than one EE Subgroup assignment could be captured. But the field is setting the default value of the same field in PA, IT0001. If there is more than one value, it cannot be decided, which one is to use. So, in that respect, it doesn't make sense. Then it's easier and better to just leave the field empty in OM and have it filled manually in IT0001.
    most comoanies don't used that field in OM anyway.
    kind regards
    Sven

  • Work Flow for Cat Time sheet approval(more than one employee)

    Hello Frn's,
    SAP provided workflow for time sheet approval using CAT2 transaction . Currently it is sending mail only a single employee's manager(while Time admin is submiting the time sheet of more than one employee) .
    But i need to send mail (work Item) to managers of all the employees .
    Please suggest some way to achieve this requirment .
    Thanks and Regards ..
    Priyank Dixit

    Hello Cahndra,
    I analyzed the task , it is passing only a single employee . Beacause of that it is sending mail for one employee's manager.
    Thanks and Regards..
    Priyank Dixit

  • How to return more than one record through OUT parameter in procedure

    Hi,
    I want to create a procedure which accepts one input and returns more than one record as output.
    example:
    Input = DeptNo
    Output= Empno,ename,sal,comm,job
    Scenario:
    There can be more than one employee in department we pass as the IN parameter. OUT parameter has to return all the records of the corresponding employee details in that department.
    Thanks in advance for your help
    Regards,
    K.Vijay

    -- I think you can try something like this using ref cursor:
    -- create a package for the type ref cursor and execute
    CREATE OR REPLACE PACKAGE PACK_REFCURSOR_FOR_TABLES AS
         TYPE DATA_TableRows IS REF CURSOR;
    END;
    -- after executing the package above, create your procedure:
    CREATE OR REPLACE PROCEDURE GET_EMP (
         IN_nDeptNo IN number,
         OUT_Emp OUT PACK_REFCURSOR_FOR_TABLES.DATA_TableRows)
    IS
    BEGIN
    -- leave query open (implicit) as this will return data
         OPEN OUT_Emp FOR
         SELECT *
         FROM tblEmp
         WHERE DeptNo = IN_nDeptNo;
    END;
    --execute the procedure and you're done                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Can More than one chief Position Approve Pay Increase in Compensation Mgt

    Hi Gurus
    I am new to compensation Management and there was a scnario given to me to identify more than one Chief Position can approve an employee's Budget or Pay hike?
    Is there any Possibility available in standard SAP Functionality?
    Can anyone help me out by sending Compensation Mangement Configuration document for my reference.

    Yes! you can have the following stages;
    Submit - Initiator
    Reject    - Approver 1
    Approve  - Approver 1
    Activate  - Approver 2
    Best Regards,
    Aslam Roaz

  • How do you position tags in a spreadsheet? Can I eSign more than one tab in a spreadsheet?

    How do you position tags in a spreadsheet? Can I eSign more than one tab in a spreadsheet?

    Using text tags
    https://workspaces.acrobat.com/app.html#d=Bi-SZ3cbVCHwiWBBp-7G7g
    but spreadsheets are quite difficult to predict as they don't typically have a page size defined. If you can do this in Word it'll be easier.
    or convert to pdf before uploading to EchoSign.
    You an upload a spreadsheet with multiple tab and place tags on each tab and all will get converted.

  • How can I apply text position attributes (e.g. lower third) to more than one title at a time?

    How can I apply text position attributes (e.g. lower third) to more than one title at a time?

    jhb3243
    What version of Premiere Elements are you using and on what computer operating system is it running?
    In the case of this theoretical lower third to be applied to more than one title at a time
    a. Is there text in the lower third besides a graphic of some kind?
    b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
    If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
    I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
    Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
    Thanks.
    ATR

  • More than one service Performer per sales order position

    Hallo ByD community
    We are using service type "Service - time and material" in our sales orders and we are using the integrated time recording in the self-service (time sheet) to track actual times for an sales order. For that you have to assign a service performer in the sales order position, so that the person is able to enter acutal times for this sales order Now it can happen that not only one person, but a team (or two or more people) has to record times for this sales order position.
    is that possible and if not what would you suggest.
    F.e.. in project management you can activate time recording for a project task for several people.
    Thank you :-)
    BR

    Hi  lisa ,
    It is not possible to enter more than one service performer for a service in sales order .
    But you can  perform the service with two people and have two service confirmations.
    The time entered in service confirmation will be reflected in invoice only(if time and material).
    Also you cannot enter the time sheet with respect to sales order , it is only valid for project task and
    and time types.
    Regards,
    Harish

  • More than one "Sales Employee"(Partner Function Value) in sales order.

    Hi Experts,
           My customer requested add more than one "Sales Employee"
    in Sales Item Line. As the standard SAP, I can add only one
    "Sales Employee" value in one partner function. Any suggestions?
    Thanks,
    Prach

    Hi Prach,
    You can add one sales employee per line item. In one line item you cannot add morethan one sales employee however.
    If you want to include morethan  one sales employee to EVERY LINE ITEM, then
    1. Create some PFs like Salesperson1, Salesperson2 etc, say upto 5.
    2. Now assign this PF to the sales document header and item category,
    3. For all the PFs, you can have the same account group.
    4. Now you can create customer master for all these sales person.
    5. Once this is done, you can link multiple sales persons for each line item.
    Hope thsi helps you
    Pls reward if thsi helps you

  • Can a position be linked to more than one org unit by A012 relation in SRM?

    Hi All,
    In the HR Org structure in ECC, a position (S) can have more than one A012 relation with different organization units (O).
    For example:
    S 123 has a A012 relation with Org unit A; validity date: 04/04/2006 to 12/31/9999
    S 123 has a A012 relation with Org unit B; validity date: 06/01/2006 to 12/31/9999
    org unit B falls under Org unit A in the Org unit hierarchy structure.
    But, in SRM I find that only one relation A012 linking S to O can be maintained, which is:
    S 123 has a A012 relation with Org unit B; validity date: 06/01/2006 to 12/31/9999
    I tried passing the data again through PFAL transaction (update mode), but the data in SRM does not change.
    Is this standard behaviour? Can't a person manage more than one org unit in SRM?
    I am currently working on SRM 5.0 with ECC 6.0 as backend.
    Regards,
    Ancy

    Hi,
    This functionality only relates to users who are professional
    purchasers. It means that they can be responsible for more than one
    purchasing group. In past releases, they were responsible for the
    purchasing group that they hung from in the org structure. Since some
    customers wanted that they could be responsible for more than one
    purchasing group, but the system would not allow the purchaser to belong
    to more than one org unit. Hence they introduced the new functionality
    that I described above. However it is not technically possible for a
    user to belong to more than one org unit since this would lead to
    inconsistencies in the way that the attributes work.
    I hope this helps.
    Kind Regards,
    Edel.

  • Work centres for employee of more than one plant

    Hello experts
    I have a question regarding work centres. Our department is managing a pool of workers which consist of employee from more than one plant. Somebody had made experience concerning this issue?
    Furthermore we have to manage external workers as capacity. How can I build up this in SAP?
    Best regards

    >
    > I confused plants with company code.
    >
      This bit difficult for me to decide and say something.
      Depends on the business requirement and business process and legal statuses it will be decided.
      some time plans can also be company 'codes'.
      if the management wants to differentiate plants in financial terms plants may become company codes.
    >
    So we have employees of different company codes which get managed by one department manager. Is that possible to make one work center so that we are able to manage them together. Seems infeasible.  So we have to create for every company code one work center, but we never have an overview of our total workers...
    >
    One thing you need to get clarified here. Company is a separate legal entity.
    if you want one employee to work in different companies on different assignments you support use (MGE and CE concept)
    >
    > If he/she working in two different site we can manage the situation with dual reporting concept.
    > and with:
    > For cost center you can always use cost center split. while posting to FI/CO.
    >
      Dual reporting is to manage the people.
      Cost is for final analysis ( where employee work how much incured, how much profit/loss earned)

  • Identify Supervisor if current Position has more than one A012-assignment

    Hello experts,
    I wonder if you could help me with this "challenge" please:
    Starting point is a non-vacant position that owns more than one A012-assignment.
    For example:
    Position-ID: 00000001
    01.01.2006     31.12.9999     A012     O     004712
    01.01.2007     31.12.9999     A012     O     004711*
    01.01.2006     31.12.9999     A008     P     101010
    *The second A012-assignment is needed because the person leads the O 004712 as well as O 004711 (general manager).
    If I am using the standard function RH_GET_LEADING_POSITION, I get a sy-subrc = 1 (which means that there was no leading position found). But there is a position owned by the supervisor of the person 101010 that should be determinated:
    O 004711
    ___S 00000002
    _____P 101020
    _______|O 004712
    _________S 00000001
    ____________P 101010
    If I delete the first A012-assignment of position 00000001 it works fine: P101020 is shown as Supervisor of P 101010.
    Does anyone know how to solve this problem, if there is more than one A012-assignment?
    Thanks in advance.
    Greetings,
    Dirk vdH

    Hi Ronny,
    According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
    I tested the same scenario per your post, and I got the same results as you got.
    We will help to submit the issue to proper pipeline for you.
    Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay. 
    Appreciate your time and patience.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Audio Error : Mavericks and Motu 828x (IOAudioStream[0xffffff8028dc4c00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position)

    Hello i've got audio dropouts and clock hiccups with my Motu 828x and Mavericks.
    Brand new macbook pro i7 Retina 13".
    console display after a hiccup :
    IOAudioStream[0xffffff8028dc4c00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position
    Motu tells me to downgrade to 10.8
    Any help ?

    If MOTU says that its software is incompatible with Mavericks, then it is.
    Macs used for sound editing are often overloaded with third-party system modifications such as drivers. If that's the case with yours, you may have to make some hard decisions about what software you really need. You might have to create multiple startup volumes with different sets of software.

  • Hiring more than one person to the same position.....

    Hello, experts,
    Am surprised to see that I cud hire another person for the same position which was already occupied 100%. I understand that a position may be filled by more than one person, totalin to 100%. In this case, though one person occupies the position to 100% full, am still able to hire. Could anybody help me with this as to why is it so.
    thank you,
    Sarita.

    Hello sarita,
    The problem is coming from the setting of the relationship A008 in table V_T777ZVK, which is set to 2 instead of 3.It is not recommanded to change the standard setting as it can cause issues, which can be critical, refer to note 396103 for mor information on the consequences.
    If you want to have warning message in PA40 when assigning position to make sure only one person is assign to one position, you can do the following:
    If the 100 % check is set to 'W' in T77VA you get a warning message
    telling you that the A008 relationships of P xxxxxxxx exceed working
    hours by xxx % Message no. 5A 321
    You should set this flag to 'W' for example when there are two persons who should be assigned to the same position, i. e. when they are working part time.
    If the 100 % check is set to 'E' in T77VA you will get an error message telling you that A008 relationships of S xxxxxxxx exceed 100 % by 100.00 % Message no. 5A 323
    To get this error message please make sure, that you have maintained both entries in table T77VA (relationship characters):
    Best Regards,
    Deepak.

  • One position reporting to more than one position in other org unit

    Hi Experts,
    How to map in SAP if One position is reporting to more than one position in other org unit. plz explain me the in detail.
    Regards,
    Saumya Chawan.

    Hi Saumya,
    First you have to decide on the relationships you want for this position.  The question is - who will decide pay increases for this position?...who will approve vacation time?  That manager is the one who is the directly managing the position and so the position must be in the org structure for that manager's org unit. 
    Second, what is the relationship to the other manager?  This is usually a "dotted-line" or functional reporting relationship to another position.  You can use a standard relationship such as 005 or create your own. 
    Then you can use the Matrix to create the two relationships.  Easy Access:  Human Resources --> Organizational Managment --> Organizational Plan --> Matrix (transaction PPME).  Use the "Standard selection" and create the two relationships between the position and the org unit and other position (or other object depending on your requirement). 
    Paul

Maybe you are looking for