More than one filter in a BAdi implementation

Hi Experts,
   Is it possible to have more than one filter value for one BAdi implementation?
   Or should I create separate implementation for every filter value?
   I tried creating second filter in an existing BAdi implementation and it is not allowing.
Thanks and regards,
Venkat.

Hi,
I agree with Sandeep.
You can create n number of filter values according to the bussiness need.
Thanks
Arbind

Similar Messages

VPN with more than one filter / nested ACL

Dear All,
Is there a way to assign more than one ACL to a VPN profile or implement a nested ACL structure?
I am trying to avoid modifing a large list of ACLs to insert the same ACE in each ACL bound to different VPN profiles.

Hi,
I know only the few basics ways to control the VPN users traffic they basically are
Changing the global "sysopt" setting and controlling all user traffic on the external interface ACL
Use separate VPN Filter ACLs
If using subinterfaces for local interfaces then tie the VPN connection to a specific Vlan which would allow connectivity only towards that Vlan subinterface for those VPN users.
In some cases we might use a separate device to do the access control.
But I guess if the requirement is to have a specific ACL for each VPN user group then the original suggestion is not an option for you.
I was just thinking that using the same ACL would make it easier to generate the new configuration addiotion. Atleast in the sense that the ACL name for each rule would be the same. If you didnt make too broad ACL rules it would not really allow any connectivity between the different networks involved though that would also depend on the NAT configurations, not just the ACL.
- Jouni

PS2013 / SQL 2012 - A SQL Reporting Services Report with more than one filter connection looses connection in a site template

Hi,
I created in a sub site not linked to a project to become a site template. I inserted two SQL Reporting Services reports web part that require the same two dates for an interval and the name of the project in a page of the site and connected
to three filters, two for date and one for text and I got the page below (only one of the reports shown).
Look that all parameters needed by the report are linked to the filters above the report.
Then I save the site as template with all contentes and assign it to the EPTs and create a new project or replace the site of existing project site. What I got is:
Look that the filter connection of the dates are lost (in both reports) and the order of the filters changed.
I deleted and retried to connect the filters in diferent order and language, but I did not get any success.
The BI Central Data Connectivity resource is activated in the template site and in the site collection.
Is there any solution for this?
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi,
Correction: this happens only with "Date Filter" web part!
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

LOGDUMP utility, more than one filter at a time

I need to search in a trailfile for a specific transaction and would like to search for an update statement to table XYZ. When I issue the following commands, it only uses the filter for the update statement:
Logdump 115 >filter clear
Logdump 116 >open ./dirdat/XY000009
Current LogTrail is
Logdump 117 >detail on
Logdump 118 >ghdr on
Logdump 119 >filter include filename CORRECT.XYZ
Logdump 120 >filter include iotype FieldComp
Logdump 121 >n
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 92 (x005c) IO Time : 2013/03/26 17:12:48.000.000
IOType : 15 (x0f) OrigNode : 255 (xff)
TransInd : . (x02) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 76 AuditPos : 131521360
Continued : N (x00) RecCount : 1 (x01)
2013/03/26 17:12:48.000.000 FieldComp Len 92 RBA 11416
Name: WRONG.TABLE_NAME
After Image: Partition 4 G e
0000 000a 0000 0000 0000 0001 e6ce 0001 000a 0000 | ....................
0000 0000 0000 0004 0005 0015 0000 3230 3133 2d30 | ..............2013-0
332d 3236 3a31 373a 3132 3a34 3800 0700 0a00 0000 | 3-26:17:12:48.......
0000 0000 0000 2700 0a00 1500 0032 3031 332d 3033 | ......'......2013-03
2d32 363a 3137 3a31 323a 3438 | -26:17:12:48
Column 0 (x0000), Len 10 (x000a)
Column 1 (x0001), Len 10 (x000a)
Column 5 (x0005), Len 21 (x0015)
Column 7 (x0007), Len 10 (x000a)
Column 10 (x000a), Len 21 (x0015)
Filtering suppressed 32 records

You need to use the FILTER MATCH ALL
Logdump 119 >filter include filename CORRECT.XYZ
Logdump 120 >filter include optype FieldComp
filter match all
filter show <-- to verify that both filters are usedThanks,
Raj

WAD - Exclude more than one value with filter button

Hi guys
I have been working on a web template with a button to set a filter to exclude two values. E.g. I want to exclude both the values '28' and '30' from the dataprovider.
What I have done is insert a button group item, create a button with the command SET_SELECTION_STATE_SIMPLE to exclude '28' as command 1 and SET_SELECTION_STATE_SIMPLE to exclude '30' as command 2. This does however not give me the correct result, as it only excludes '30' as set in command 2. So the conclusion must be that SET_SELECTION_STATE_SIMPLE can not be used, as it will only work with one value.
So I went on and tried with SET_SELECTION_STATE which gives the possibility to choose more than one filter value. However it does not seem possible to exclude values with this command?
Is it not possible to exclude two filter values with a button in a BI 7.x web template?
BR
Stefan.

Dear Frank
I did it as like as the following link lead me:
http://www.oracle.com/technology/obe/obe11jdev/11/adfbc_new_features/adfbc.html
The problem has been appeared when I attached the "Create" button and when press on it to create new record, then the "LOV" couldn't work correctly.
Thanks for your reply

TableView - Filter more than one value in same column

Hi folks,
I faced a problem on filtering a field more than one value.
Does it possible solution for us to bring out filtering function while user try to enter few values in the SAME filter field?
Thank you.
First, i need to clarify my exact problem.
--> I have created one tableView with filter = "server". Then i want to allow my user to enter few filter values in same field column.
Example 1:
Before
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
CCC CCC CCC CCC
DDD DDD DDD DDD
EEE EEE EEE EEE
After
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
Is that any good suggestions to solve my doubt?
Message was edited by:
 GP Poh

check out this work around. in this sample currency column supports multiple values and multiple values in the filter column should be enter with comma as separater.
page attribute:
filtertab TYPE RSELOPTION
filter_wa TYPE RSDSSELOPT
itab TYPE FLIGHTTAB
layout
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title=" " >
 <htmlb:form>
 <htmlb:textView id ="tex"
 text = "Filter on Currency Column support multiple values, they can be entered with comma as separater like 'usd,DEM'"/>
 <htmlb:tableView id = "tv1"
 design = "ALTERNATING"
 table = "<%= itab %>"
 filter = "APPLICATION"
 columnHeaderVisible = "true"
 sort = "SERVER" />
 </htmlb:form>
</htmlb:page>
</htmlb:content>
oninitialization
select * from sflight into table itab where currency in filtertab .
oninputprocessing
* event handler for checking and processing user input and
* for defining navigation
DATA: table TYPE REF TO cl_htmlb_tableview .
DATA: tv_data TYPE REF TO cl_htmlb_event_tableview.
DATA: filter_value TYPE string .
DATA: fil_val TYPE STANDARD TABLE OF string ,
 fil_val_wa TYPE string .
REFRESH filtertab .
table ?= cl_htmlb_manager=>get_data( request = request
 name = 'tableView'
 id = 'tv1' ).
IF table IS NOT INITIAL .
tv_data = table->data .
IF NOT tv_data IS INITIAL .
 CALL METHOD tv_data->get_row_filter_value
 EXPORTING
 column_index = 6
 RECEIVING
 value = filter_value.
 IF NOT filter_value IS INITIAL .
 TRANSLATE filter_value TO UPPER CASE .
 REFRESH fil_val .
 SPLIT filter_value AT ',' INTO TABLE fil_val .
 CLEAR fil_val_wa .
 LOOP AT fil_val INTO fil_val_wa .
 filter_wa-sign = 'I' .
 filter_wa-option = 'EQ' .
 filter_wa-low = fil_val_wa .
 APPEND filter_wa TO filtertab .
 ENDLOOP .
 ELSE .
 REFRESH filtertab .
 ENDIF .
ENDIF .
ENDIF .
Regards
Raja

How to pull groups from more than one OU using weblogic "All Groups Filter" from AD.

Hi,
Please help me for pulling groups from more than one OU using weblogic "All Groups Filter" from AD.
AD structure is:
c001639domain.local
       ||
       ||
    OU=Security_Groups
                  ||
                  ||
                  >> OU=CORP_ECM---> n number of group
                  >> OU=CORP_hodata--> n number of group
                  >> OU=CORP_citrix--> n number of group
                  >> OU=CORP_driver --> n number of group
                  >> OU=CORP_temp --> n number of group
Requirement is i want to filter groups from OU=CORP_ECM and OU=CORP_hodata.
Thanks,
Jagan.

I used below option but its not working getting zero groups.
(&(objectClass=group)(|(ou=CORP_ECM,dc=Domain,dc=com)(ou=CORP_hodata,dc=c001639domain,dc=local)))

Dynamic Filter SAP HANA - For more than one field

Hi Guys,
    Is their any way we can apply filter for more than one field. Lets take below example i want to apply filter both on PERNR & DOJ. I am able to apply filter on PERNR but when i try to create filter on more than one field (PERNR & DOJ ) it throws me some error.
Please let me know how we can achieve this.
OUT_EMP_SAL = SELECT A.PERNR, A.DOJ, A.FNAME, B.SALARY FROM "SAPH74".EMP_INFO A
INNER JOIN "SAPH74".EMP_SAL B
ON A.PERNR = B.PERNR;
OUT_EMP_SAP = APPLY_FILTER(:OUT_EMP_SAL, :IN_PERNR )

Hi Lakshmi,
You may need to use the end while calling, i took the same example from the "Help" in hana.
CREATE PROCEDURE GET_PROCEDURE_NAME (IN filter NVARCHAR(100), OUT procedures outtype)
AS
BEGIN
    temp_procedures = SELECT SCHEMA_NAME, PROCEDURE_NAME FROM SYS.PROCEDURES;
    procedures = APPLY_FILTER(:temp_procedures,:filter);
END;
CALL GET_PROCEDURE_NAME(' SCHEMA_NAME = ''SYS'' AND PROCEDURE_NAME like ''TREX%''', ?);
Regards,
Krishna Tangudu

Can a class implements more than one interface?

Hello
Can a class implements more than one interface?
Thanks

Of course, this doesn't mean that it won't be a problem though. If the two interfaces have methods with the same signature, but different return types, you won't be able to implement them together. I.E.
interface InterfaceA {
public int doSomething(String myString);
interface InterfaceB {
public String doSomething(String myString);
// Now the classes
// Gives error "Duplicate method doSomething(String) in type ClassA"
public class ClassA implements InterfaceA, InterfaceB {
public int doSomething(String myString) {
    System.out.println("A");
    return 0;
public String doSomething(String myString) {
    System.out.println("B");
    return 0;
// Gives error "The return type is incompatible with InterfaceB.doSomething(String)"
public class ClassB implements InterfaceA, InterfaceB {
public int doSomething(String myString) {
    System.out.println("A");
    return 0;
// Gives error "The return type is incompatible with InterfaceA.doSomething(String)"
public class ClassC implements InterfaceA, InterfaceB {
public String doSomething(String myString) {
    System.out.println("B");
    return 0;
}

Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
Zayed

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

Filter photos that are located in more than one album

I'm trying to organise my iPhoto events onto albums in the new photos app in 10.10.3, however, I think I messed up with a bunch of photos and need to start clean, I need to be sure that one specific photo or group of photos are located in a single album, kinda like iPhoto used to work with events, I know a photo can be in more than one album at a time, but how do you tell with filters?
Tried to create smart album but seems to be no criteria for that.
Thanks.

You can't. You know that during the conversion from iPhoto to Photos all of your current iPhoto Events also were converted to albums inside the folder in the sidebar titled "iPhoto Events".
So you only have to worry about new imports which go into Moments.

More than one VI at a time (i.e. multitasking)

Hello.
I currently work in a lab where we use LabVIEW to control an multifunction instrument. We use the sofware both for data acquisition (through Ni-DAQ) and for physical control of things like stages, and frequency generators (e.g. through GPIB). There are a few programs that do very simple things (like move a stage with a joystick, or turn a laser on and off) that I would like to run continuously in the background while I run other more specialized software (like a data acquisiton routine). However, when I run more than one VI at the same time I run into very bad timing problems. Some of my programs require this kind of multitasking and I have implemented it using a sort of Master loop (similiar to the Master/S
lave paradigm discussed on the NI website).
If I were to purchase the compiler and build executables out of some of the VIs, would I be able to run these in the background while LabVIEW runs other VIs without running into timing issues?
Also, if I build executables from some of the VIs would these VIs be able to access global variables that LabVIEW is using (I assume the answer is no, but I figured I'd ask).
Thanks,
Josh
[email protected]
=====================
Joshua Shaevitz
Department of Physics
Stanford University
Stanford, CA 94305

First, do you know where your timing problems are coming from? Are some of those background tasks very processor intensive, or is the problem that you're sharing subVIs that aren't reentrant (and hence may be "blocking" each other)? Have you tried multithreading the application yet (running the motion control in one thread and the laser control in another, for instance)?
Splitting your tasks between multiple executables might help, but it will almost certainly increase the overhead of each background task, and you will not have common access to global variables. You could, however, work around that by instituting a common data repository as one of your background tasks (presumably accessed through a messaging interface).
In fact, I would probably suggest
this as a method of performance optimizing your application anyway -- if you are using globals extensively for parallel operation, they might be part of the blocking problem.

How can i transfer more than one file from server to client

Hi,
our requirement is transfer more than one files from server to client using the
webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
regards
mat

just an idea ...
for this purpose let us put aside security concerns and other potential problems....
-- Get the content of a server directory with Filter and create zip file
1) create a class that implements java.io.FilenameFilter ...
2) define accept() method ...
3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
4) use java.util.Zip to create ZIP file on the server side
-- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
-- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
5) use webutil to transfer file on the client
6) use Java on client side to unzip transferred file
if you think this is not too complicated, you should try ...
Regards,
Vladimir

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

Update gives "single-row subquery returns more than one row"

Hi,
I have to update a table by getting values from two other tables. While doing that the inner query returns more than one value. I am not sure how to implement the logic without returning more than one row in sub quesry. Need help on that.
My query:
update buf_office_str o
set o.manager_ident =
(select sp.ident
from se2_r_src_sourceperson sp ,
(select distinct director_name, team_name from buf_sales_dump )t
where SP.SRCNAME = upper(substr(t.director_name,instr(t.director_name,' ')+1,length(t.director_name))||', '||substr(t.director_name,1,instr(t.director_name,' ')-1 ) )
and o.office_descr = t.team_name
Basically the query gets teh manager id from sp table where sp.srcname = t.team-name.
The office descr should be equal to the team_name.
This is the logic I am working towards:
For each office, i get the office_descr and get corresponding team_name. Match the team's director_name (from table t) with the sp.name and return the employee's id (sp.ident) for that office_descr.
I need to update all 50 offices with corresponding managerid for that office in buf_office_str table.
Is it possible to get done in one update? Pls let me know.

Hi,
"Single-row subquery returns more than one row" is one of those error messages that actually means what it says: the correlated sub-query in your SET clause is sometimes returning 2 or more rows .
The solution could be as simple as making the sub-query SELECT DISTINCT , as its in-line view, t, already is.
It's possible you have bad data, or a mistake in your statement.
To find the problem cases, you can run something like this:
WITH sub_q     AS
                   SELECT -- DISTINCT ?
                            sp.ident
                   ,         t.team_name
                   ,         COUNT (*) OVER (PARTITION BY t.team_name)     AS cnt
                   FROM    se2_r_src_sourceperson     sp
                   ,         ( SELECT DISTINCT director_name
                               ,                  team_name
                           FROM            buf_sales_dump
                         )                    t
                   WHERE   sp.srcname     = UPPER ( SUBSTR ( t.director_name
                                                     , INSTR ( t.director_name
                                              ) + 1
                                            , LENGTH (t.director_name)
                                      || ', '
                                      || SUBSTR ( t.director_name
                                                      , 1
                                               , INSTR ( t.director_name
                                                    ) - 1
SELECT     o.*     -- or whatever helps you
,     sq.*
FROM     buf_office_str     o
JOIN     sub_q          sq     ON     o.office_descr = sq.team_name
WHERE     sq.cnt          > 1
;If you'd like more help, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables as they exist before the UPDATE, and the results you want from that data (that is, the contents of buf_office_str after the UPDATE). Make sure the problem occurs with the sample data you post.

More than one filter in a BAdi implementation

Similar Messages

Maybe you are looking for