MOSS 2007 Database Migration using SQL connection alias change throwing error

Hi Folks,
We are trying to move SharePoint SQL server from one DC to another DC.
Since we have made SQL server in new DC with other name so opted SQL server connection alias method to remap SQL mapping with existing farm.
After creating SQL alias we are able to browse central admin sites but could not able to browse any other sharepoint sites.
Event viewer showing below exception
SQL database login failed. Additional error information from SQL Server is included below.
Login failed for user 'computername$'.
Any view will be much appreciable.
Regards

First: Putting SQL Server on a domain controller is not recommended.
Are the two domain controllers in different domains? Is the SharePoint server in the same domain as the new SQL instance?
Do you have a SharePoint farm or a standalone installation? A
common cause of the error you're seeing is if the application pools are using Network Service or Local System which can be the case of a standalone installation.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Similar Messages

IBM DB2 to Oracle Database Migration Using SQL Developer

Hi,
We are doing migration of the whole database from IBM DB2 8.2 which is running in WINDOWS to Oracle 11g Database in LINUX.
As part of pre-requisites we have installed the Oracle SQL Developer 4.0.1 (4.0.1.14.48) in Linux Server with JDK 1.7. Also Established a connection with Oracle Database.
Questions:
1) How can we enable the Third Party Database Connectivity in SQL Developer?
I have copied the files db2jcc.jar and db2jcc_license_cu.jar from the IBM DB2 (Windows) to Oracle (Linux)
2) Will these JAR files are universal drivers? will these jar files will support in Linux platform?
3) I got a DB2 full privileged schema name "assistdba", Shall i create a new user with the same name "assistdba" in the Oracle Database & grant DBA Privillege? (This is for Repository Creation)
4) We have around 35GB of data in DB2, shall i proceed with ONLINE CAPTURE during the migration?
5) Do you have any approx. estimation of Time to migrate a 35 GB of data?
6) In-case of any issue during the migration activity, shall i get an support from Oracle Team (We have a Valid Support ID)?
7) What are all the necessary Test Cases to confirm the status of VALID Migration?
Request you to share the relevant metalink documents!!!
Kindly guide me in-order to go-ahead with the successful migration.
Thanks in Advance!!!
Nagu
[email protected]

Hi Klaus,
Continued with the above posts - Now we are doing another database migration from IBM DB2 to Oracle, which is very less of data (Eg: 20 Tables & 22 Indexes).
As like previous database migration, we have done the pre-requirement steps.
DB Using SQL Developer
Created Migration Repository
Connected with the created User in SQL Developer
Captured the Source Database
Converted Captured Model to Oracle
Before Translation Phase we have clicked on the "Proceed Summary"
Captured Database Objects & Converted Database Objects has been created under PROJECT section.
Here while checking the status of captured & converted database objects, It's showing the below chart as sample:
OVERVIEW
PHASE               TABLE DETAILS          TABLE PCT
CAPTURE               20/20                              100%
CONVERT               20/20                              100%
COMPILE                 0/20                                   0%
TARGET STATUS
DESC_OBJECT_NAME
SCHEMANAME
OBJECTNAME
STATUS
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:ARG_I1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H0INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H1INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H2INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H3INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H4INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H4INDEX02:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H5INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H7INDEX01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:H7INDEX02:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:MAPIREP1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:MAPISWIFT1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:MAPITRAN1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:OBJ_I1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:OPR_I1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:PRD_I1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:S1TABLE01:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:STMT_I1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:STM_I1:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
INDEX
TRADEIN1
SQLDEV:LINK:&SQLDEVPREF_TARGETCONN:null:TRADEIN1:INDEX:X0IAS39:oracle.dbtools.migration.workbench.core.ConnectionAwareDrillLink
Missing
We have seen only "Missing" in the chart, also we couldn't have any option to trace it in Log file.
Only after the status is VALID, we can proceed with the Translation & Migration PHASE.
Kindly help us how to approach this issue now.
Thanks
Nagu

SQL - Database access using Oracle.connect(getCLass(), "connect.properties")..IM LOST

Hi,
I use Oracle.connect(getClass(),"connect.properties") before all of my #sql statements. If there are a bunch of methods with #sql statements, I use the connection method. I think this is my problem and Id like some feedback from other people.
1) Should i be using an Oracle.connect statement before every #sql?
2) If so, does it create new connections all the time or does it just know there is a current connection so it doesnt keep adding new connections?
3) Is there a way to get one connection and then test to see if there is a connection so that i dont keep getting new connections?
4) Do I have to close the connections? I tried Oracle.close(); but got some wierd errors. I read somewhere that If autocommit is true, you dont have to close jdbc connections.
Thanks for your time and I appreciate any feedback that anyone has to offer.

Hi Adam,
Please find the answers inline.
I use Oracle.connect(getClass(),"connect.properties") before all of my #sql statements. If there are a bunch of methods with #sql statements, I use the connection method. I think this is my problem and Id like some feedback from other people.
1) Should i be using an Oracle.connect statement before every #sql?No, you don't have to call this each time, just call this once to intialize your DefaultContext and from then on, whenever
#sql is used, it would fetch the connection from the DefaultContext.
2) If so, does it create new connections all the time or does it just know there is a current connection so it doesnt keep adding new connections?No, it doesn't create connections each time.
3) Is there a way to get one connection and then test to see if there is a connection so that i dont keep getting new connections?There would be only one connection
4) Do I have to close the connections? I tried Oracle.close(); but got some wierd errors. I read somewhere that If autocommit is true, you dont have to close jdbc connections.The connection has to be closed explicitly using Oracle.close();
For samples on using connect.properties refer to,
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/9i_sqlj/9i_sqlj.html#BatchingAndREFCursorSample
Regards
Elango.

Online Migration using SQL developer

Hi All,
We are planning to migrate our production SQL server.2005 database to oracle 10g. If I use online migration using Oracle SQL Developer Tool to migrate data from SQL server 2005 to Oracle 10g, then will it migrate all those records that are inserted into SQL server 2005 LIVE database after the time when online migration process started?
For example let say the migration process started at 10:00 PM in the night and it found 200,00,000 records in transaction table, it will take 3-4 hours to migrate all of them to oracle, now during this migration time the LIVE SQL server database will still be getting new records, so will 200,00,000 plus newly inserted records will get migrated to Oracle 10g or only those which were initially counted when migration started?
Kindly advise!
Best Regards!
Irfan

Hi Irfan,
It sounds easy to find that out by a little test. I would expect that only those records will be transferred that are in the remote table at the moment when the migration started. Online data move uses COPY via the JDBC connection, as far as I know.
200,000,000 records and an online data move is a contradiction. From the manual:
Mode: Online causes the table data to be moved by SQL Developer when you have completed the necessary information in the wizard; Offline causes SQL Developer to generate scripts after you have completed the necessary information in the wizard, and you must later run those scripts if you want to move the data. (Online moves are convenient for moving small data sets; offline moves are useful for moving large volumes of data.)
If you are using offline data move, then you are using BCP to unload the data from the SQL Server database, and then the rules of BCP apply how the records are unloaded.
What are you trying to achieve? Do you want to keep the two databases in synch? Then a migration does not seem to me the best way. There are other products, like the Database Gateway for MS SQL Server, or the Golden Gate product.
Best regards
Wolfgang

MOSS 2007 Content DB used in transnational replication

Hello,
I have configured Transnational replication on Moss 2007 content DB over WAN, ?But it works well with small dbs of size 10-12 GB but with 40-60GB database sites are running in error like 404 Site not found....Checked in logs not luck found there also..
Any help guys.....
Regards,
Ashish

Hello,
To my knowledge only database mirroring and log shipping was supported with MOSS 2007. Log shipping is specially recommended for content
databases.
The following post talks about the benefits of using database mirroring vs log shipping:
http://blogs.msdn.com/b/mikewat/archive/2007/07/28/database-mirroring-and-log-shipping-which-is-better.aspx
To know more about these two high availability methods for MOSS 2007, please read the following article:
http://msdn.microsoft.com/en-US/library/ms179306(v=sql.90).aspx
http://msdn.microsoft.com/en-US/library/ms190640(v=sql.90).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
hello,
Thanks for the prompt reply, But would like to include the requirements as i need both end DB active so that can use application from both side and need to replicate to the point 24/7, that's why i had configure
1 way transnational replication.
And was successfully able to configure Replication for all varying size DBS but problem is that Site is not coming up for 50GBs Database, SO would like to ask if There any size limitation from Transnational replication with MOSS 2007.
Regards, Ashish

MOSS 2007 native mode on SQL 2012 with compatibility mode?

We are on MOSS 2007 SP 3 64-bit (just native, it is not SSRS integration mode) running on SQL 2008 R2 SP2 64-bit. Can the databases move to SQL 2012 with compatibility mode?

Hi,
As far as I know, SQL 2012 is not listed as compatible with SharePoint 2007 on the
technet articles. If you want to upgrade to SharePoint 2010, then you can move the databases and upgrade the database. If you just want to use SQL 2012 with SharePoint 2007, I think it is not applicable.
For more information, please refer to these sites:
SQL Server 2012 not supported on WSS 3.0/MOSS 2007 and versions previous than SharePoint 2010 SP1:
http://blogs.msdn.com/b/calvarro/archive/2012/04/27/sql-2012-not-supported-on-wss-3-0-moss-2007.aspx
SQL Server 2012 support:
http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/02fd7238-9cc2-43fc-a46c-afbfca21210b
Thanks,
Entan Ming
TechNet Subscriber Support in forum
If you have any feedback on our support, please [email protected]
Entan Ming
TechNet Community Support
Will it work with the database set with the compatibility mode ?
/* Server Support Specialist */

Database Migration MS Sql Server 2008 to Oracle

I have downloaded the latest updates for SQL Developer and am attempting to migrate my SQL Server 2008 DB to Oracle 11g. I get the following error when attempting to test my Sql Server connection:
Status : Failure - Test failed: I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property.
After attempting and following several posts, I have been unsuccessful in getting past this error - I have downloaded and placed in the specified directories the various .dll's suggested....
Any help is of course appreciated.

Boy do I look foolish. I told this guy that the owners of the application answer questions here... suerly he would get a reply.
Such is the problem with "free" software. No one to blame when it doesn't work.

Need help with database migration using export/import

Hi,
I am planning to do a database migration from 8.0.6 to 10.2.0.4. I am using export/import. Please answer some of my queries:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=y
2) Will there be any data corruption while export.
3) Is export/import the only method of migration/upgradation.
Please help
Thanks.

I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean

Defaulting DFF Segment Value using sql statement in SSHR gives error when using parameter

Dear All,
i am having an issue that i am making one segment in DFF (SEGMENT3) being defaulted by using sql statement
Select MAX(SEGMENT7) FROM PER_ANALYSIS_CRITERIA cri, PER_PERSON_ANALYSES ana where cri.Analysis_Criteria_id = ana.ANALYSIS_CRITERIA_ID and ana.PERSON_ID = :ANALYSES.PERSON_ID
The Above Select Statement is working fine on the PUI form and getting the Default value correctly but when opening the SSHR page that contain this DFF, it gives me the below error.
"No field listener is registered to resolve field ANALYSES.PERSON_ID referenced by the flexfield with application short name PER and name PEA. Please contact your system administrator. "
Any Help Please???

Please see the following docs.
Cannot Add Salary:No Field Listener is Registered to Resolve Field Review.assignment_id (Doc ID 558295.1)
No Field Listener Is Registered To Resolve Field Assgt.Effective_start_date (Doc ID 889794.1)
List of Current Enhancement Requests (ER) for Oracle EBS Self Service Human Resource (SSHR) (Doc ID 1381936.1)
No field listener is registered to resolve field xxx.xxx referenced by the flexfield with application short name ASO... (Doc ID 1359270.1)
Customer Form, Address Error: No field listener is registered to resolve field GLOB.FLEX_COUNTRY_CODE referenced by the flexfield with application short name AR (Doc ID 1276934.1)
DFF issue : No Field Listener Is Registered To Resolve Field XXX Referenced By The Flexfield (Doc ID 555589.1)
Thanks,
Hussein

Changed the variable from used in condition to changed gives error

Hi,
How to decide on which fields to be used in charecteristcs and which in used in condition. ?
I have a code in fox which works for some tets data and fails for ceration other test data. wheni changed one field from used in condition to changed field the code is working. however now when i transport the same to quality it gives the error as :
" Variable Material Must Have a Type of a Field to be Changed.
Kindly Help on this. From where should i changed the type of material ? currently i have just changed the tick of the check box from " used in condition " to " changed "
Thanks And Regards,
Vijay

Hi Vijay,
Please replace the code with the following one.. I think it will work now.. Apparently there is no problem with field to change option. However, please note that you are checking the help option (below fox editor) while providing the sequence for material and Plant. It might happen that system is looking for plant and material option and you are providing as material and plant option.
Please check the code below:
DATA CALMONTH TYPE 0FISCPER.
DATA LO_CURR TYPE 0LOC_CURRCY.
DATA LO_0CALQUAT TYPE 0CALQUARTER.
DATA MATERIAL TYPE GPUMATL.
DATA VENDOR TYPE 0VENDOR.
DATA LO_VENDOR TYPE 0VENDOR.
DATA PLANT TYPE GPUPLANT.
DATA L_SPLIT TYPE F.
DATA L_VOL TYPE F.
DATA TOT_VOL TYPE F.
DATA L_VOLUME TYPE F.
DATA L_FISCQUAT TYPE GPUFSCQRT.
BREAK-POINT.
TOT_VOL = 0.
*CALCULATE TOTAL VOLUME
FOREACH MATERIAL, PLANT,VENDOR, LO_CURR,LO_0CALQUAT,L_FISCQUAT .
L_VOL = {Z9APSHIP,LO_0CALQUAT,LO_CURR,VENDOR,L_FISCQUAT ,MATERIAL,PLANT}.
TOT_VOL = TOT_VOL + L_VOL .
*CALCULATE SPLIT % BASED ON TOTAL VOLUME
L_SPLIT = {GPU_VSPER,LO_0CALQUAT,LO_CURR,VENDOR,L_FISCQUAT ,MATERIAL,PLANT}.
L_VOLUME = PERP(TOT_VOL,L_SPLIT).
{Z9APSHIP,LO_0CALQUAT,LO_CURR,VENDOR,L_FISCQUAT ,MATERIAL,PLANT} = L_VOLUME .
ENDFOR.

Problem in connecting Database by using SQL Developer

Hi,
I recently installed SQL Developer after installing Oracle 10g and am trying to connect existing database. could anybody help me to connect and what credential should i required to connect.
Thanks in advance
LN Reddy

I am new to oracle myself, so I apologize if this information is not helpful. But I have a number of connections to a local database on my laptop. The way that I connected is using the 'Basic' tab with the following settings:
Hostname: localhost
Port: 1521
SID: orcl
And of course the username above.
I hope that might be helpful.

DataBase Migration from SQL server 2005 to SQL server 2012

What are the challenges and steps to be taken care for proper migration of the Database.
Applications are using the Visual Studio 2012.
saikalyan

Few things that I can think of -
Verify all logins and users are migrated correctly.
Some of the SQL Server 2005 features/code could be deprecated in SQL Server 2012. Changes could be required before or after migration.
Some of the queries could have different performance (better or worse) on 2012 due to changes in query optimizer.
The applications/SSIS/DTS config files are updated to use the new server/instance name.
DNS alias names from the old servers (if used) are moved to the new server to have minimal impact on connection strings.
Plan for downtime of applications and batch processes.
Notify developers about the migration and the new server name(s)
- Aalam | (Blog)

Database Migration using ASM

Hello All,
We are using oracle database 10g on AIX. We are using asm for storage on a shared location.
Now we want to move our database from old servers to new servers.
I want to know if we could use the same asm based datafiles for new database to avoide database data migration. Can we switch our database from one server to another and use the same datafiles??? or we have to migrate our database by RMAN or expdp etc???

we want to move 9 Tb database from tru64 and filesystem to solaris and asm on 10.2.0.3, we will be testing RMAN with CONVERT;
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm#sthref1379
and physical dataguard options.
so do you have any experience with the source and the target OS different case, like source as Tru64 and destination as Solaris;
SQL> SELECT a.platform_name, a.endian_format
2    FROM v$transportable_platform a
3   WHERE a.platform_id IN (2, 5)
4 ;
PLATFORM_NAME                                                                    ENDIAN_FORMAT
Solaris[tm] OE (64-bit)                                                          Big
HP Tru64 UNIX                                                                    Littleor is there any similar step by step reference like Howard's article for same OS case?
Thank you, best regards.

How to specify a particular index for DB2 database when using SQL in ABAP

Is this format for Oracle?
select *
   into -
   from vbrk CLIENT SPECIFIED
where erdat in erdat
    and mandt EQ sy-MANDT
    %_HINTS ORACLE 'INDEX("VBRK" "VBRK~ZER")'
For the index 'VBRK~ZER' was defined before,it only includes one field 'VBRK-ERDAT'.
How can i tell Sap to use this index while processing SQL in DB2?
Thanks advance.

There are different hints for the different database platforms.
For up-to-date information please read the SAP notes, search 'hint DB2'.
Siegfried

Siebel database migration from Sql Server 2005 to Oracle 11g RAC.

Hi,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?
The current configurations are:
Application : Siebel
database : SQL Server 2005
The hardware can be changed if needed. Can you please suggest the best approach ?
Thanks,
Naveen.
Edited by: Naveen Kumar C on Mar 18, 2011 9:10 PM
Edited by: Naveen Kumar C on Mar 18, 2011 11:44 PM

Hi Naveen,
We would like to migrate our Siebel database from Sql Server 2005 to Oracle 11g RAC. Can you suggest the best way to do that ?You will need much more which suggestions.
You will need a Siebel professional which has done this type of migration. Migrating the Database is not a task so hard, after migrating your environment should be functional and healthy it is usually the task problematic.
The hardware can be changed if needed. Can you please suggest the best approach ?We can recommend the minimum recommended, but this documentation already does, you need to do a analysis on your environment and ask a vendor Siebel tell the which is recommended for you and how to find the best "number" for you, in your case is very hard because everything changes.
Check this Step-by-Step
Migrating a Microsoft SQL Server Database to Oracle Database 11g
http://st-curriculum.oracle.com/obe/db/hol08/sqldev_migration/mssqlserver/migrate_microsoft_sqlserver_otn.htm
Regards,
Levi Pereira

MOSS 2007 Database Migration using SQL connection alias change throwing error

Similar Messages

Maybe you are looking for