Motion Assistant Code Generation

I am using the Motion Assistant code generation tool to generate a simple single axis relative move in LabView.
In the Motion Assistant I can jog the motor CW or CCW, however it does not appear I have control over the rotation direction in the VI.
The LabView code works fine otherwise for all other parameters, I just need to be able to control the direction.
Can someone pointme inthe right direction?
Thanks
Kevin

Figured out the error of my ways....changing the sign of the distance number controls the rotation direction.

Similar Messages

NI Motion Assistant LabVIEW Code Generation Error

Hello, the following is my current setup:
NI PCI-7334 motion control board
NI UMI 7774 splitter board
3 x NI P70530 Drives
3 x NI CTP12ELF10MAA00 Stepper Motors
3 x Power supply units for drives
LabVIEW 2010
NI Motion Assistant 2.6
Motion and Automation Explorer 4.7
I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
Thank you for your help.

Hi Joe,
I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
Attachments:
1111.vi ‏9 KB
1 axis movement.zip ‏8 KB

Motion assistant 2.1 code generation...

HI all!
I have a problem generating labview code with motion assistant 2.1 ; My labview version is 8.2.1 and I've tried all manner of installs / uninstalls combinations trying to get it to generate labview code. It consistantly gives me the error: Labview templates not found when I try to generate...
Any info would be appreciated!

Hi,
Thank you for using the NI discussion forums. It sounds like the problem may be with the NI motion driver. Have you installed the NI-Motion driver? This is seperate from the motion assistant. Once this is installed then you should see that error go away. If you do have that installed what version are you using? Did you install NI Motion after LabVIEW? If you did it before installing LabVIEW you may have not included LabVIEW support, which can be corrected by modifying the installation. I hope this helps.
Have a great day,
GG

Motion assistant: Cannot convert to Labview diagram

Hello,
I would like to ask for help on problem: the file generation from Motion assistant to Labview
Background:
1. Use Motion assistant to generate 2 or 3 steps of motion.
2. Inside Motion assistant, Use Tools>>Generate Code>>LabView Diagram.
Result:
After I doing this, the LabView file is generated. But, it is a file containing a few control switch (without any other key components to produce the motion control function).
Thus, what is the problem behind?
Thanks
James

Good morning James,
This post appears to be a duplicate of the following thread:
http://forums.ni.com/ni/board/message?board.id=240&message.id=3878
Please refer to this thread for the solution. If am incorrect, please post back and I will do my best to answer your questions.
Respectfully,
Jeffrey P.
LabVIEW Product Management
National Instruments

Motion assistant: Cannot convert to LabView file

Hello,
I would like to ask for help on problem: the file generation from Motion assistant to Labview
Background:
1. Use Motion assistant to generate 2 or 3 steps of motion.
2. Save it.
3. Inside Motion assistant, Use Tools>>Generate Code>>LabView Diagram.
Result:
After I doing this, the LabView file is generated. But, it is a file containing a few control switch (without any other key components to produce the motion control function).
Thus, what is the problem behind?
Thanks
James

Dear Jochen,
I had tried what you said.
1.
Treat read-only VI as locked : uncheck
Enable window explorer for LLB file : check
Note: basically, I have reset the machine after set the options
2.
Uninstall Ni-motion -> no-reboot -> install again
After I have do this steps individually, Nothing has corrected.
What is the problem then?
Regards,
James
Note:
Attached please find the Motion assistant source file for your reference
Attachments:
Motion-Part2b.vi ‏9 KB

Loop in motion assistant specified number of times?

I was wondering if in motion assistant I can do a loop in my script so that each movement can be repeated many, many times without having to create a new 'step' for each movement? Any help is appreciated.
Thanks,
Nichole

Nichole,
Motion Assistant does not currently support loops in its environment. What I recommend is that you create your steps with just one pass and then add the loop in the code Motion Assistant generates.
Rodger S.

NI Motion assistant Position Profile

HiI am trying to use NI motion assistant to generate position profile so that I can output to ESP300(Newport stage controller) for UTM500cc.1(not supported by NI I guess).
The thing is when I convert the Labivew code, it looks there no way to get position profile from the vi. I need to have the NI hardware to run that vi too.
Is there any way to get position profile from NI motion assistant?
Brad
Solved!
Go to Solution.

Hi changlin!
Have you tried the Get Straigt Line Move Profile VI available on the Motion Assistant palette in LabVIEW?
Kristen H.

Motion assistant msvcr90.dll

I was trying to run an EXE that I built that uses Motion Assistant to build contour profiles. I was able to run this last week without this problem occuring:
I am getting an access violation from LV 11.0 when it is trying to use MSVCR90.dll
I have never seen this issue whent using NI Motion or boards before. When I went to reboot Windows 7 (64) wanted to do an update install.
I am running LabVIEW 2011 SP1 I believe.
Anyone know what could be causing this?
Upon reboot I will try again and see what the Windows update installed.
Ryan Vallieu
Automation System Architect

Hi Ryan,
I'm not sure what might be causing this, but here are a few steps we can take to identify the underlying issue:
1) Is LabVIEW generating a crash log file when the access violation occurs? If so can you post it here?
2) What version of NI-Motion is referenced by the EXE?
3) MSVCR90.dll does not appear to be related to NI-Motion. Is the EXE performing any other notable functions? Particularly in calling external code?
4) Was the EXE built on a 64 bit system? Does the same error occur on the development (or any other system)?
Sorry for the long list of questions, but hopefully they will help us narrow down the cause of the crash.

Motion assistant labview

hi
I have to control a motor speed using the PcI 7342 controller.
I have MID 7654/7652 servo motor drive and NI motion assistant.
MY hardware connections are proper.
I am using motion assistant to generate a arc move and then generating labview code .
I have inserted just a knob in the front panel to control the speed and made a slight modification in the block diagram to insert the knob in the place of velocity.
Now i am not able to stop the motor .
Can anyone help me to insert a stop button in the labview diagram.
Should i use configure inhibit output flex or just use the stop button in flex motion.?
i have attached the labview diagram....
Pls help me.
thanking you
sumitha ravindran
Attachments:
labvie diagram.vi ‏49 KB

Hello Sumitha,
The code generated by Motion Assistant is designed to run the arc move once and stop at the end of the move. The Arc Move step of the LabVIEW diagram is setup to wait until the move completes before stopping. There should be no need to add a stop button (or the Stop Motion VI) if the motor is configured properly. If this is the case, you should see the VI hanging in the Arc Move step. Is this what you see? Can you perform a straight line (point-to-point) move?
I noticed that you have another similar discussion forum post here. You most likely will need to solve the motor configuration issue first (which may also solve this issue).
Best Regards,
Jesse D.
Applications Engineering
National Instruments

NI Veristand 2014 doesn't appear in MATLAB R2014a Code generation

Hi
I installed NI Veristand 2014 after installing MATLAB R2014a. I restarted my PC and tried to apply the sinewave example. I looked at code generation in Simulink model configuration parameters but couldn't find the NIVeristand option as illustrated in video. Here is a screenshot of system target file:
Did I miss installing something? That was my installation (since I need Veristand to compile MATLAB model):
Thanks for your assistance in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Solved!
Go to Solution.

Hi Waleed,
Unfortunately the behavior your are experiencing is a fault in our installer's auto-detection of MATLAB R2014a. The NI VeriStand 2014 node you see in the installer setup window is actually hiding several other unique options. The default selections should auto-select MATLAB support if MATLAB was successfully detected by our installer, unfortunately this procedure has failed.
To workaround this:
1. Relaunch the installer setup window
2. In the Features setup window (your second picture), left click on the image next to the NI VeriStand 2014 label
3. You should now be presented with the option, Install with customization - select this option.
4. Proceed with the installation, eventually you be presented with custom options for the VeriStand product.
5. In the VeriStand feature list, select the NI VeriStand 2014 Model Framework option
6. Proceed with the installation.
After this, restart MATLAB and then relaunch. If the installation was successful, on relaunch of the MATLAB COmmand Window will print the string Initializing NI VeriStnad 2014. Please note that we've documented this issue and are making an effort to address it.
Nestor

I am using 7340 motion control card. what i am doing is ,first of all i initialise my 7340 card by MAX and then through motion assistant i am making a 1-d motion for my steeper motor using drive MID-7604/7602.

then i generate the labview code from there,,,,,,,,what is happening in labview is i am able to run the motor but to stop the motor by using stop button there or by using a while to stop the motor...it is not responding i have to go back to motion assistant to stop the motor...............can any body suggest me what to do ,,,is there any problem in my softwares settings..................???????
Message Edited by 0518 on 02-17-2009 01:39 AM

Hello,
You have mentioned that you are using motion assistant to generate the code. Do you run the LabVIEW VI that it has generated or are you directly running it from Motion assistant?

Linear encoders with Motion Assistant

Hello,
I recently ordered some SIKO MSK5000 linear encoders ( http://www.sikoproducts.com/viewProduct.cfm?productID=MSK5000 ) for a stepper motion application. I hooked one up as a test and according to the status LEDs it worked but Motion Assistant (1.3) seemed to not pick it up. Then I realized that I am not even sure what motion assistant should be doing! I can't find in the documentation what exactly should happen when I hook up an encoder so could someone help me out? We want to make sure they work before installing them (which will require lots of disassembly.)
Thanks!
Relevant hardware:
PCI-7334
MID-7604

Hello,
Hopefully I can get you going with with Motion Assistant. Basically the Motion Assistant is software that allows you to easily develop and test a motion control program through a fairly straight-forward API. You can create a set of moves, called a script, one step at a time to see the cumulative effects of these steps. This script can then be converted into LabVIEW code or several different text-based programming codes. Before you begin using the Motion Assistant, however, you need to configure you motor setup in Measurement and Automation Explorer (MAX). In MAX you setup the properties of your specific motor, encoder, limit switches, control style, etc. Below is a link to a Motion Fundamentals tutorial on ni.com, and I believe the Configuration section should help you through configuring you motor in MAX.
http://zone.ni.com/devzone/conceptd.nsf/webmain/722ECF56222AAD5086256F7B007072C4?opendocument&node=1...
This link has a good tutorial on the Motion Assistant itself: http://www.ni.com/swf/presentation/us/motion/. Hope this helps.
Jason N

Motion Assistant Contour Array Points - Optimal Array Size?

I am working with the NI Motion Assistant API and plyaing around with the Contour Move generation where I feed a set of X, Y target points to the Set Contour Move Properties.
One of the inputs is Profile Calculation Constraint - Array Size, Constraint Value (which would be the array size to use).
I am wondering if there is a way to calculate the "optimal" array size for any particular move? I know I can have too few - can I have too many points in an array (being reasonable here and not planning to use the whole 2^32 size allowed).
Thanks.
Ryan Vallieu
Automation System Architect

Hi Ryan,
Unfortunately, I'm not so sure I have a good answer for you. I'll evaluate some of the pros and cons below and then ultimately make a recommendation:
Constraint Type: Array Size
Pros
You always have a fixed sized array of setpoints. If you are using a 73xx card, this simplifies setting up your contour buffer. It also avoids using a lot of memory.
Cons
For long moves, you could have a long time and large distance between position setpoints. The motion card will do a spline interpolation to smooth the move, but the splining algorithm is only so good.
If you are sending the contour setpoints to a motion card, you don't know the interval between setpoints (although this isn't difficult to obtain).
Constraint Type: Sampling Time
Pros
Regardless of the move, you always have a fixed time between setpoints. As long as your sampling time isn't too large, even fast moves should execute accurately.
Cons
For a long move, you could generate a lot of setpoints that consume a lot of memory.
Setting up contouring buffers can be trickier.
Conclusion
It depends on what you expect the end customer to be doing. I prefer using the sampling time constraint since it is more robust for fast, long moves (and still good for slow, short moves). It will make creating contour buffers more difficult, but there is an example (Two-Axis Smart Contouring.vi) that shows how to dynamically update the buffer. Ultimately, I think it is better to focus on accurate moves than minimizing memory consumption.
If you decide to go with the sampling time method, I would start with a constraint value of .01, since 10msec is the shortest interval when configuring a contour buffer. Try and generate some position profiles to see how big the arrays are. For optimizing, it is just a tradeoff between array size and the accuracy of the generated motion profile.
Thanks,
Paul B.
Motion Control R&D

Error in code generation for deleting table BUT000_TD

Hi,
Did anyone encounter this error while working on EEWB ?
I created the project extension via EEWB and completed the wizard setting with the package (dev. class) value as $temp as I wanted to test it locally.
One of the errors, that I got is:
Error in code generation for deleting table BUT000_TD
    Message no. DA464
Diagnosis
    This error message indicates that internal inconsistencies exist.
Procedure
    Please consult SAP.

Hi,
As I mentioned in my previous post kindly check the consistency of the structure BUT000_TD.
Regards,
Sudheer.

Error during distribution for compiled code generation-Reply

Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a®

Motion Assistant Code Generation

Similar Messages

Maybe you are looking for