Motion tween created not works after exporting as SWF,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting as SWFmy animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

Similar Messages

SWF File not working after upload to server, but works on local system

HELP PLEASE.....I have created a Fla and exported a swf file
from Flash 8 and Export (Flash 6). I can preview the page in
Dreamweaver just fine, but when i upload it and the html file, it
isn't showing up. It leaves a blank spot on the page. It is just a
simple banner with graphic clips and motion tween text, with image
bgd. All images are jpg.
I have tried:
1. Using a full link to the swf file.
2. Removed drop-shodows in swf file
3. convert to Flash mx 2004 file
4. Exported to higher Flash version to see if the flash
player was an issue.
5. Exported with no dashes in name
6. Added Scr file into Dreamweaver
7. Made a new test file to see if it was something in the
current html doc, same result.
8. Tried viewing on a pc, same result. Created on mac.
Here is the test page if anyone wants to take a look.
THANKS FOR ANY ADVISE.
Test
Page Link

The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.

Motion tween created not works after exporting,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4 and actionscript3
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting my animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

Motion tween- arrows not appearing, tween not working! please help?

I select where I want my motion tween to be, ctrl-click and select 'create motion tween'. It appears blue, and does not come up with an error message but no arrows appear like in the video's and the motion tween has not worked. Any ideas why? Also, I opened up a file that already had a motion tween in it (made by somebody else) to test it. I selected the motion tween and clicked 'remove tween' and straight away clicked 'create motion tween' again- to put exactly the same motion back into it, but the same thing happens- the selected area appears blue but no motion tween. Then, if I select it again, the option is 'remove motion' not 'remove tween' as before. A little complicated and could really use some help! Thanks!

Thanks very much for the help. Classic tween has worked, the arrows have appeared and the figure moves but the shapes do not move around their anchor points and go all over the place before suddenly appearin in the right position on the very last frame.This is a screenshot of what i see on the second to last frame:
And this is the last frame:
I made sure all the anchor points were in the right place beforehand, any ideas why the shapes wont move right?
Thanks.

Keynote hyperlinks don't work after exporting to html

I'm working with Keynote in iWorks '08 on an iMac running OS 10.5.2. My hyperlinks (graphic and text) work perfectly running Keynote as a slide presentation, but not when I export it to an html format. What am I doing wrong here?
Thanks for any help you can provide.
Jeff
PS: The hyperlinks do work after exporting in flash or pdf format, but our webmaster says I can't use those formats due to compliance issues.

I noticed this as well. What I realized is that Keynote seems to just export the slide as a .jpg with a an .html file referencing the .jpg image. So in essence it is not creating an .html file of the slides contents but rather a reference to a picture of the slide. I haven't tried but maybe "send to" iweb and then "publishing to folder" will give you what you need. Not sure.

Flash cs3 "Motion tweening will not occur on layers with ungrouped..."

I am getting the error message: flash cs3 "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol"
I have only one symbol in the layer, a graphic.
Does anyone know how I can correct the "problem"?
Thanks in advance.
karen.

as the above poster mentioned I am guessing you have more than one object on that layer. you may have created a symbol from a shape and not selected the stroke.. that is pretty common.
to verify what is on a particular keyframe do a "select all" cntrl-a or cmd-a. maybe you will see more than one item selected.
look at the properties panel. if you have only one thing it will note the symbol or it will say "mixed".
perform this test in the first and last keyframe.

My multi-state object disappear's when I export to PDF but works in Preview mode?

I created a multi-state object which is a series of logos that appear when a button is clicked. There are two buttons one is set to go the the previous state and one is set to go to the next state. When I view it in the preview mode it works fine but when I export it to PDF nothing happens when I click the buttons. Any help would be greatly appreciated.

Multi-state objects are NOT supported in PDF. The PDF standard preceded the development of multi-state objects. It's now under the control of the ISO so may be slow to adapt.
They work when exporting to SWF or with the Adobe Digital Publishing Suite.

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4 they only appear in the monitor when the play button is activated. The other clips appear without a problem. I noticed that the same situation arises when I dynamically link to Encore CS4. What am I doing wrong?

Thank you Ann. But the problem is when switched on the AE clips on the timeline are only viewable when I start the project (ie press the space bar) and as it also doesn’t appear in Encore I am afraid to spend a great deal of time creating a DVD with these clips not appearing. Any advice?
Regards and again many thanks
Stanley

Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

Without proper system info and otehr technical details nobody can tell you anything.
Mylenium

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load wit

Hello I have a problem with my ipod touch 1G the problem is that see me key to the floor! And when recogi not prendia after 5 minutes prendio but it gave to me the surprise of which the battery had finished completely! What I did was to set it to load with the USB but do not load the battery me the icon of the battery appear and below of her the beam that indicates that this being loaded but this way I have left it the whole yesterday and what goes of today and continues without loading anything! They can help me porfavor I am grateful for them to him very much! And my PC does not detect it not itunes

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click)

My iCloud password won't work in my MacBook Air but works in my IPhone5s.

My ICloud password won't work in my MacBook Air but works in my Iphone5s

Sorry, but your issue has nothing to do with Apple networking. You may get better results getting a solution if you repost to the iCloud area of the Apple Support Communities.

Drill Down is not working after exporting to excel

Hi,
I have created a drill down report in SSRS . Its working perfect. But when I export it to excel, it is showing only the expanded nodes. But I want the same functionality which gives user to expand or collapse the nodes in Excel as well. Can any one please
help me with this?

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

Flex: Actionscript project swf is not working after export the release build...

Hi guys..
   I tried to built a project with AS3 only in Flex. When I run the project in flex, everything looks fine, but when I export the release build, the images that are supposed to be added are gone. I appreciate if someone can help me about it.
          init();
            public function init(loadedVideoCount:Number):void{
            singleHolder=new singleVideoCont();
            singleHolder.x=loadedVideoCount*singleHolder.width+2;
            singleHolder.y=6;
            singleHolder.buttonMode=true;
            addChild(singleHolder);
            this.addEventListener(MouseEvent.CLICK,onClick);
            showTn();
        private function showTn():void{
                imgLoader = new Loader();
                imgLoader.load(new URLRequest(_tnPath));
                        imgLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onProgress);
    imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoaded);
        private function onImgLoaded(event:Event):void {
        singleHolder.progBar.alpha = 0;
               var image:Bitmap = imgLoader.contentLoaderInfo.content as Bitmap;
                image.width=TN_WIDTH;
                image.height=TN_HEIGHT;
                image.x=3;
                image.y=3;
                singleHolder.addChild(image); //this line work when I run the project inside flex but the images are gone when I test my release build...
                imgLoader.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS,onProgress);
                imgLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE,onImgLoaded);
                //imgLoader = null;

The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.

Video not showing after video finished rendering.. worked before rendering

after editing a project to burn to dvd ... creating the fbi warning, the opening menu and the submenus... all with motion... and all working fine, i uploaded the video ... and before it finished rendering, the video worked like a champ.... now after the rendering is over, and i click "simulate" to view the project ... the fbi warning works just fine ... but the actual movie itself does not. the audio works fine ... and can be heard clearly... but the video is nothing but completely black.
even when i scroll the video editing section where i chaptered it and what not, the video will not move. it just stops at the screen frame where i placed the mouse to start the video... but the audio continues.
i'm sure this is a setting i have overlooked as i've already authored DVD's before and never had this problem.
i thought the video was bad and even reloaded the video and let it render again .... anyone have any suggestions?
imac g5 Mac OS X (10.4.8)

update::: figured out that the video was somehow corrupt. doesn't make any sense... but i just deleted and reloaded it and it works now...
new issue ::: when going to burn the DVD ... now i keep getting into the 20% range and then it says "video bitrate too high" ... so i've adjusted that repeatedly on the preference menu of studio pro ... and still getting the same issues.

Motion tween created not works after exporting as SWF,but works in TEST MOVIE(ctrl+enter)

Similar Messages

Maybe you are looking for