SWF File not working after upload to server, but works on local system
HELP PLEASE.....I have created a Fla and exported a swf file
from Flash 8 and Export (Flash 6). I can preview the page in
Dreamweaver just fine, but when i upload it and the html file, it
isn't showing up. It leaves a blank spot on the page. It is just a
simple banner with graphic clips and motion tween text, with image
bgd. All images are jpg.
I have tried:
1. Using a full link to the swf file.
2. Removed drop-shodows in swf file
3. convert to Flash mx 2004 file
4. Exported to higher Flash version to see if the flash
player was an issue.
5. Exported with no dashes in name
6. Added Scr file into Dreamweaver
7. Made a new test file to see if it was something in the
current html doc, same result.
8. Tried viewing on a pc, same result. Created on mac.
Here is the test page if anyone wants to take a look.
THANKS FOR ANY ADVISE.
Test
Page Link
The link you provided is to the SWF file, not to an HTML
file, so no one can test your HTML file.
Have you checked the code for the embedding of the SWF file
in your HTML file? I don't use Dreamweaver much, but I do know that
if you start assembling a Dreamweaver file without first saving the
HTML, embedded graphics and other items are inserted as direct
links to the files on your computer, rather than as relative paths.
There is one other possible issue: I note that your swf is
called CWABanner.swf. Depending on your FTP settings, it is
possible that your server is forcing all file names to lower case
(a common practice). Which means the file on your server will be
cwabanner.swf. Again, depending on how the web server is set up, if
it is case sensitive, it will treat CWABanner and cwabanner as
separate files. So if the HTML calls CWABanner.swf, but the FTP
upload has forced a rename to lower case to cwabanner.swf, the HTML
file will not find it. Check this out, or to be absolutely certain,
rename everything to lower case: the file name itself and the
reference in the HTML file.
Similar Messages
-
Web galleries--thumbs and large images not showing after uploading to server
I have created 2 web galleries--one html and one Flash. I saved them to my local drive and they work perfectly. Then I uploaded to our server (I checked to see that all folders/files made it, and they did) and then when I access the index.html file, neither the thumbnails or the full-size images show. In case it helps to see, here are the two URLs
FLASH
http://www.photosafaris.com/SlideshowLogs/PalouseSlideshowFlash/index.html
HTML
http://www.photosafaris.com/SlideshowLogs/PalouseSlideshowHTML/index.html
Anyone have suggestions/ideas?
Thanks,
RVSean--that did the trick for HTML galleries...thanks! I am working on a IIS server, so I presume your fix and the server are related to the problem I was exeperiencing.
In a Feb 4, 09 reply you posted to someone else, you referenced a link (see below) about making similar file mods to make Flash work, but I couldn't access the link. Any chance you could repost these mods so I can use Flash galleries on a IIS server as well.
Did you try my suggestions in the Flash thread?
http://www.adobeforums.com/webx/.59b76546/3
Much appreicated,
Rick -
Why won't my SWF file attached to html play in Safari but work fine in Firefox?
I've tested the files in dreamweaver, on all browsers, and they work fine. But when I uploaded them to my site they only work in Firefox. The crazy thing is when I check the file in file management they work just not from the main site. What am I missing?
I have a MacBook Pro bought in 2010. I had been burning Sony DVD+R's without any problem.
Then I ran out of blanks and bought a cake of Sony DVD-R's. Put one into the drive and the
macbook spit it out. Launched Toast then inserted the blank again and Toast says "You can't write
to this disk". Quit Toast and out comes the blank.
The system info for the DVD drive says it can read/write -R, -R DL. +R, +R DL, etc. Anything.
I don't know what the problem is, but it is not a failing or dirty drive. I don't think it is a problem with
the blank DVDs either. It is probably a compatibility problem between MacBook Pros and
Snow Leopard/Leopard and -R DVDs. -
Swf files only play after FLash CS5.5 is loaded
I click on a swf file in a folder and for a while it said it was a shockwave file (after I downlaoded and installed Shockwave, I don't know why, had nothing to do I guess). So I realized that shockwave wasn't the answer and uninstalled it.
Then when I click on a swf file, nothing happens. I've right clicked on it and tried to put an association with it but I don't know where the flash player 11.1.152 resides in orderr to make the association.
I had cs4 D,P, and cs5,D,P, which I just recently uninstalled becaues adobe told me it was ok to uninstall the Design Premium since I recently purchased cs5.5 master collection. I usually don't fool around with files like this but
I must have been bored. Now I'm not.
t Since I don't know wha t to associate my swf files with, I associated it (file association, I get there by right clicking on a swf file and a small window opens and asks what prorgram it should use to open the swf file). I know it's FLASH but
I don't know where the file resides... in windows? In program files? In program data?? Where?? Once I find it, I will be able to chooes it and make the file association. and I am sure it will work then. I have an adobe case # with this issue
but it's taking them 2 days now to find an answer. they suggested I come here, so here I am. PLease assist!! Thanks in advance! dougSo, I finally figured out how to do it. And here is the code for anyone who is trying to do the same.
First thing first when you are exporting captivate file to flash it creates a "com" folder, you will need that folder to access the rdSoundHandler.
And then simply use the following code to play/pause the swf. This code will not work for swf file created in flash.
This is the answer to problem I found, if anyone find a better way then please keep posted.
import flash.net.URLRequest;
import flash.display.Loader;
import com.adobe.captivate.flash.rdSoundHandler;
var ldr:Loader=new Loader();
addChild(ldr);
ldr.load(new URLRequest("externalCaptivate.swf"));
playp.addEventListener(MouseEvent.CLICK,playF);
pausep.addEventListener(MouseEvent.CLICK,pauseF);
function playF(e:Event){
MovieClip(ldr.content).rdcmndResume = 1;
function pauseF(e:Event){
MovieClip(ldr.content).rdcmndPause = 1; -
Sounds with Buzz not playing after upload
Hi,
So I have a project that works fine testing in browsers but when I upload it I get no sound. I have the sounds saved in oog, mp3, and wav. The file structure is the same, buzz script is uploaded as well as the sounds folder. I did change the html file name to index.
Does anyone have any ideas on why the sounds wont play?
ThanksThanks for responding. Sorry I had forgoten the link.
http://briancschneider.com/zip/web
I'm not using edgecommons. I'm using buzz! for the sounds.
Checking other threads on sound was very helpful in getting the sound set-up. I've been unable to find a thread about sounds not playing after upload except certain formats not playing in some browser. That shouldn't be my issue since I have the sounds in multiple formats, but I'm obviously overlooking something so... -
Hii friends i develop one swf for my site in which i
hyperlink some pages with images
swf is working on my pc but when ever i upload it on my site
it stops working
My Flash Player version is 9 and Action Script version is 3
Plz help me out that how it works after uploading on
siteTry checking the security options at the "export" window. Try
both of them: access netowork only and access local files only.
Can we have a look at the page which causes the
problem? -
Getting 'File not found' error while using server object model code
Hi,
I am using server object model code to pull list data in a console application. My machine has standalone installation of SP 2010. I am getting error 'File Not Found', however the same operation is working fine with client object model code.
Code I am using:
string strURL=http://servername/sites/sitename;
SPSite siteObj=new SPSite (strURL); //getting error here.
I have already checked the below,
1. Framework being used is 3.5.
2. I have proper access to site.
3. Running visual studio as admin.
Any help is much appreciated.
thanks
Tarique
thanks and regards Tarique AslamHello Tarique ,
Couple of pints need to check:
1. User running the console application needs to have at least read permission to the SharePoint databases
2. Set application by changing the "Platform target:" option on the "Build" to "Any CPU"
Also refer this similar thread:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2a419663-c6bc-4f6f-841b-75aeb9dd053d/spsite-file-not-found
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Navigation not working in Weblogic Server but working from JDeveloper.
Hi
I created a simple application with some page navigations (some declarative and some dynamic using Managed Bean).
The navigation works fine when I run from JDeveloper. (Local System)
So I deployed the application to the WebLogic server (Local system with a domain configured with ADF.)
The pages are getting rendered correctly, bu on button clicks, the navigation is not happening from any of the pages.
Could I have missed something or is there a way to track what the problem might be?
JDev : 11.1.1.3
Web Logic Server : 11gR1 (1.3) which comes with JDeveloper
Thanks for any help.
SameerHi John
I am not using task flows. I just have some jspx pages defined in the unbounded task flow adfc-config.xml connected with navigation.
I run from JDEveloper by right clicking on the jspx files.
The URL when run from jdeveloper is as follows.
http://127.0.0.1:7101/SessionsPOC-ViewController-context-root/faces/MainPage
From Weblogic server I am using the link given in the Testing tab of the weblogic administration console.
The URL is as follows.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root (default)
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/MainPage.jspx
Actually, the URL given in the weblogic testing tab is not runnable. I am changing the link as follows to be able to run it.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/MainPage.jspx
I have defined the MainPage.jspx in the web.xml 's Welcome page. But it is not taking it I guess.
Also, I am able to run the other page by giving the following url. But the navigation buttons are not working in that page also.
http://10.9.73.103:7001/SessionsPOC-ViewController-context-root/faces/SecondPage.jspx
Thanks
Sameer -
Adobe Edge Animate CC 2014.1 is totally not working. It stop working after 5min. Sometimes is stops the operating system. On on mac OS X Yosemite. macbook pro i7 2013.
I reinstalled it not helping.
Message was edited by: Daniel BoguszewskiUPDATE
i have ulpaded 2 animation ( one normal and one Responsive ) in 2 different server here the link
www.eclipseadv.com/maliRP/maliRP.html
Untitled
via SAFARI or CHROME on MAC all OK
but via IPAD ( SAFARI, CHROME and MERCURY) i didn't see the video, just the animation of the BUTTON and the link if i click on it (not in Mercury), like in the content viewer. -
File not picking up in FTP server
Hi SAP-XI experts,
2 different files are send to same FTP server but one file was picked but other was not picking.
Error that came while monitoring CC is as below:
"Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration / structure 'row.': More elements in file csv structure than field names specified!".
Seeing the error we cross check the content of file present at FTP server. But everything was fine,it contain same no.of fields present in Content conversion and even same length.
Solution: I added a extra row in Content conversion "row.additionalLastFields ignore".After that i stop and restart the Communication channel it start picking the file but the Communication channel is still in red.
Can u please tell me ASAP the reason why the file was not picked first and then after adding extra row it started picking.
Thanks & Regards
VijjiHi,
it is related to some problem with the data only...because i too faced the same issue...i was also not able to see the new line when i try to open the same in notepad++ ... may be some other paramters or data of excel/CSV which is avoiding to display the same..in notepad++
also try one more thing...enable the new line characters and see if there is any difference...between the processes and failed files...
HTH
Rajesh -
Is the Upload to Server feature working in CS6 for Mac . . . or any of the export modules?
No, unfortunately the photomerge ui plugin will not work in photoshop cs6 on the mac side.
You can always use photoshop cs5 for those times when you really need it.
In photoshop cs6 you could align your photos manually as best you can, then select all the layers and go to Edit>Auto-Blend Layers>Panorama with Seamless Tones and Colors checked -
External swf file not using URLRequest
Good morning guys.
You can load an external swf file not using URLRequest? Since embed html code is setted as <param value="never" name="allowscriptaccess"/>
I have this problem and I need to load a swf skin
thank youare you loading a swf (done during runtime) or importing one (done during authortime)?
in either case, the allowscriptaccess parameter of the external swf (that your loading or importing) is irrelevant. allowscriptaccess is assigned in the main (loading or importing) swf's embedding html page and is used to control html/js access of the main and loaded swfs.
if you trust the swf you're loading, you can change allowscriptacess to always. if you're importing a swf, none of its actionscript will execute anyway so it doesn't matter whether its trusted or not. -
Camera RAW, file not recognized after import and migration, Aperture 2.1
Hi,
I have recently purchased a 1DMKIII and am constantly getting "file not recognized" after I import and even after migrating RAW files. My 1DS MK1 RAW files have no issues. The RAW files render just fine using CS4 bridge. Any ideas here on a fix? Other than ditching Aperture (not desireable)
Thanks,
GregHummmm..I have just 'manned-up' from a 2gb macbook running tiger+CS4 to a iMac 24" 8gb running leopard BUT!
I shoot RAW and the iMac will not recognize the NEF RAW files! this is soo frustrating - tried to update Camera Raw but to no avail.
please help! I've got 987 raw wedding photos to process!!
I dont know what to do! -
How can I make my external loaded .SWF file smoothly disappear after 15 seconds?
Hi,
How can I make my external loaded .SWF file smoothly disappear after 15 seconds? The following is the code to load an external .SWF file:
var K:Loader=new Loader();
addChild(K);
K.load(new URLRequest("clock.swf"));
K.x = 165;
K.y = 247;
K.contentLoaderInfo.addEventListener(Event.INIT, growLoader);
function growLoader(evt:Event):void {
K.width = 130;
K.height = 130;
I want to make clock.swf file disappear from the page after 15 seconds using some smooth disappear effect.
Please help.
Thanks.Something even better:
http://www.greensock.com/
Check out TimelineMax I LOVE it...
The guy that made this (and gives it away for free!) is a saint. -
why doesnt the DVD version of iworks work, after uploading (and then deleting) the trial version?
Check out this discussion in the iWork forum. Yvan's AppleScript (about 6 messages down) will solve your problem.
Maybe you are looking for
-
Express 2.0.L.2 -Reply
We've experienced it in Express 2.0.L.0 and Forte said that it would be fixed in 2.0.L.3 which was supposed to be available around now but we've haven't received it yet. Mark Carruthers 20th Century Fox "Christian Boult" <[email protected]> 07/08/99
-
Inconsistancies in available stock in z custom table and LQUA
The users are using transaction code LT01 for assigning cost center for a particular quantity hence updating VERME feild in LQUA table. beside this we have another custom program that uses for stock movement and whenever the movement takes place thro
-
Weblogic.management.descriptors.ejb11.BackendLogMBean
Hello people, When I start WL 6.1sp2 on NT, I get this exception. It worked before, and I'm not aware of any change. The class is not in my weblogic.jar -- should it be? There's no .wlnotdelete/ in applications/ Starting WebLogic Server .... <29.05.2
-
I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.
-
Interfacer LabVIEW avec un oscilloscope LeCroy Waverunner 6100 A
Bonjour je suis un nouveau utilisateur de LabVIEW ! Je voudrais savoir comment faire pour aquerir le graph d'un signal sur un oscilloscope LeCroy Waverunner 6100A, et l'analyser sur LabVIEW (bref controler l'oscilloscope a partir du LabVIEW). J'ai fa