Mountain Lion Kerberos GSSAPIDelegateCredentials does not work against Solaris Machine

Hi,
After upgrade my systems to Mountain Lion the ssh option GSSAPIDelegateCredentials fails when tries to login in a Solaris 10 machine. The ssh client close the connection after the message "Delegate credentials" when runs in a verbose mode. The server side says "child closed the communication pipe before user auth finished"
Using only the option GSSAPIAuthentication it works, but I need the credentials delegated because in the Solaris server I need that credentials to be able to mount the network home disk (security reasons).
Using the same configuration in a Lion client, this option works well (like in Snow Leopard and Leopar, but that OS uses MIT distribution instead Heimdal).
If the server is a Linux box, instead Solaris, and using MIT Kerberos distribution, the GSSAPIDelegateCredentials works too.
Any idea about how to fix this Bug? Or I have to wait to the next patch release?
Thanks in advance
H.

Boot into Recovery (command-R at startup), launch Disk Utility, select the startup volume, and run Repair Disk (not Repair Permissions.) If any problems are found, repeat. Then reboot as usual.

Similar Messages

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • Mountain Lion Server Web Server not working after time machine restore

    Our Mountain Lion Server (mac mini) lost its drive yesterday.  We got a new mac mini and did a time machine restore.  Everything in the Server seems to be working (users, groups, file shares, etc) except for the web server.
    Trying to connect to the server results in safari not being able to connect to the server.  Even just clicking on the "view server website" link in the Server app doesn't work.
    We've tried stopping / restarting the services.  We have confirmed that the files in Library / Server with the web pages were restored.
    Are there any gotchas, troubleshooting steps or guides anyone can point me to?  I'd like to get our wiki back.
    Thanks
    Jeff

    /var/log/apache2/error_log repeats the following lines about every 30 seconds:
    [Tue May 07 18:44:15 2013] [error] Init: Pass phrase incorrect
    [Tue May 07 18:44:15 2013] [error] SSL Library Error: 218710120 error:0D094068:asn1 encoding routines:d2i_ASN1_SET:bad tag
    [Tue May 07 18:44:15 2013] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag
    [Tue May 07 18:44:15 2013] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error
    [Tue May 07 18:44:15 2013] [error] SSL Library Error: 218734605 error:0D09A00D:asn1 encoding routines:d2i_PrivateKey:ASN1 lib
    [Tue May 07 18:44:26 2013] [crit] (17)File exists: mod_rewrite: Parent could not create RewriteLock file /var/log/apache2/rewrite.lock
    Configuration Failed

  • After upgrading to mountain lion my calendar does not print in weekly mode anymore

    after upgrading to mountain lion my calendar does not print in weekly mode anymore

    I'm having the same problem with both my Vivotek wired network camera and Panasonic wireless network cameras. At first I thought this was an issue with the video framework in Mountain Lion, but if Firefox is working (I haven't tried it yet), it sounds like it may be an objective-c video library that has been changed. It's possible Firefox is using an objective-c interface that calls an objective-c function that isn't called by Safari or IP Camera Viewer, etc., (possibly a function that is on its way to be deprecated) or Firefox could use it's own library that directly calls the video framework.
    Could be the Mountain Lion objective-c framework has a buffering issue.
    Since this is occuring in both 3rd party software and Apple software, it sounds like it's an Apple issue. 3rd party applications typically utilize the Apple Developer objective-c frameworks to access video frameworks/libraries (for example, MJPEG). Thus, contacting 3rd party developers may not solve the situation (unless they can figure out a temporary bandaid--possibly figuring out the video framework call that Firefox uses and patching their software to do the same (not a simple task), but could still provide more feedback to Apple via their developer status.
    Has anyone attempted to record from their cameras via iMovie or Final Cut Pro X HD? I will try mine later tonight to see if it records the hanging. If it does, then it's looking more and more like Apple's the culprit.
    My suggestion is for everyone to file a bug report via http://www.apple.com/feedback/macosx.html

  • Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

    Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

    Under what circumstances does mail "not leave the mails on the server"?
    If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
    If you mean something else, please explain your issue in more detail.

  • After I upgraded to OS X from OS Mountain Lion my notification is not working or showing on my menu bar. Please help

    After I upgraded to OS X from OS Mountain Lion my notification is not working or showing on my menu bar. Please help

    Hi Gimmemar,
    That does sound frustrating, to not have your iPhone 4s recognized by Image Capture or iPhoto. The article linked below has a lot of great information and some troubleshooting tips that you may not have tried already, which will resolve most issues like this one.
    iOS: Unable to import photos to computer - Apple Support
    Cheers,
    -Jason 

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • After upgrading to Lion Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    After upgrading to Lion, Image Capture does not work, even though it is intel software.  Gives error 9931.  What gives?

    Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
    Didn't used to be this way before Lion/10.7.
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • After Mountain Lion download, FaceTime is not working anymore. Any ideas?

    After Mountain Lion download, FaceTime is not working anymore. Any ideas?

    I have reinstalled mountain Lion again . This time, Facetime works when somebody calls me, and I can do calls from my Mac again. But the problem was still that I was not able to call my iPad, what I was able to do with Lion (I had one Apple-ID and two call adresses). The solution was this time to generate a second Apple-ID from the Facetime in my Mac (this doesn't affect your main Apple-ID, it's only used for Facetime). Now, it works!  ;-)

  • After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

    After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

    Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

  • Since I've installed Mountain Lion, my mail does not "UNBOLD" my read mail, even though I have checked in Preferences.

    Since I've installed Mountain Lion, my mail does not "UNBOLD" my read mail, even though I have checked in Preferences.

    You don't sync the MM calendar anymore, you subscribe to it in iCal,
    iCal>Preferences>Accounts, enter the details here.
    MM should be the default calendar on all clients.

  • Minetest translation does not work on my machine.

    Hey there.
    After trying my luck in the official Minetest forums a week ago and got nothing more than the initial “try this-and-that” thing as response in the German discussion section and no reply at all in the regular discussion section I decided to ask on Reddit on last Saturday afternoon, too. On Reddit my question only got 3 upvotes and no comments.
    Since no-one seems to know what’s going on I decided to post my question here, too.
    It sems like the translation feature in Minetest does not work on my machine for unknown reason.
    The language files are there and according to it’s oputput and the PKGBUILD Minetest was compiled with gettext support. LANG and LC_MESSAGES are properly set (I even tried LC_ALL). Localization works properly in all other applications that support localization.
    Here’s some relevant system information.
    $ uname -rms
    Linux 3.16.1-1-ARCH x86_64
    $ minetest --version
    Minetest 0.4.10
    Using Irrlicht 1.8.1
    Build info: VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
    $ pacman -Ql minetest | grep locale/de
    minetest /usr/share/locale/de/
    minetest /usr/share/locale/de/LC_MESSAGES/
    minetest /usr/share/locale/de/LC_MESSAGES/minetest.mo
    $ locale
    LANG=de_DE.utf8
    LC_CTYPE="de_DE.utf8"
    LC_NUMERIC="de_DE.utf8"
    LC_TIME="de_DE.utf8"
    LC_COLLATE="de_DE.utf8"
    LC_MONETARY="de_DE.utf8"
    LC_MESSAGES="de_DE.utf8"
    LC_PAPER="de_DE.utf8"
    LC_NAME="de_DE.utf8"
    LC_ADDRESS="de_DE.utf8"
    LC_TELEPHONE="de_DE.utf8"
    LC_MEASUREMENT="de_DE.utf8"
    LC_IDENTIFICATION="de_DE.utf8"
    LC_ALL=de_DE.utf8
    $ cat /etc/locale.gen
    de_DE.UTF-8 UTF-8
    en_DK.UTF-8 UTF-8
    en_US.UTF-8 UTF-8
    According to the discussion in the German discussion section in the Minetest forums I tried to set language = DE (and variants like de_DE with or without .utf8 in all possible variants) in minetest.conf but it didn’t change anything. Also: Here’s the output of running Minetest with --verbose parameter.
    16:47:01: INFO[main]: Using system-wide paths (NOT RUN_IN_PLACE)
    16:47:01: INFO[main]: path_share = /usr/share/minetest
    16:47:01: INFO[main]: path_user = /home/dirk/.minetest
    16:47:01: INFO[main]: minetest with SER_FMT_VER_HIGHEST_READ=26, VER=0.4.10 BUILD_TYPE=Release RUN_IN_PLACE=0 USE_GETTEXT=1 USE_SOUND=1 USE_CURL=1 USE_FREETYPE=1 USE_LUAJIT=0 STATIC_SHAREDIR=/usr/share/minetest
    16:47:01: INFO[main]: logfile = /home/dirk/.minetest/debug.txt
    16:47:01: VERBOSE[main]: httpfetch_init: parallel_limit=8
    16:47:01: INFO[main]: Message locale is now set to: LC_CTYPE=de_DE.utf8;LC_NUMERIC=C;LC_TIME=en_DK.utf8;LC_COLLATE=de_DE.utf8;LC_MONETARY=de_DE.utf8;LC_MESSAGES=de_DE.utf8;LC_PAPER=de_DE.utf8;LC_NAME=de_DE.utf8;LC_ADDRESS=de_DE.utf8;LC_TELEPHONE=de_DE.utf8;LC_MEASUREMENT=de_DE.utf8;LC_IDENTIFICATION=de_DE.utf8
    Irrlicht log: Irrlicht Engine version 1.8.1
    Irrlicht log: Linux 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
    Irrlicht log: Using renderer: OpenGL 3.3.0
    Irrlicht log: GeForce 9600 GT/PCIe/SSE2: NVIDIA Corporation
    Irrlicht log: OpenGL driver version is 1.2 or better.
    Irrlicht log: GLSL version: 3.3
    16:47:01: INFO[main]: text_height=22
    16:47:01: INFO[main]: Searching worlds...
    16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
    16:47:01: INFO[main]: Spielwelt
    16:47:01: INFO[main]: 1 found.
    16:47:01: INFO[main]: Waiting for other menus
    16:47:01: INFO[main]: Waited for other menus
    16:47:01: INFO[main]: Audio: Initializing...
    16:47:01: INFO[main]: Audio: Vorbis extension NOT present
    16:47:01: INFO[main]: Audio: Initialized: OpenAL 1.1 ALSOFT 1.16.0, using OpenAL Soft
    16:47:01: INFO[main]: GUIEngine: Initializing Lua
    16:47:01: VERBOSE[AsyncWorkerThread_0]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_0]: Initializing Asynchronous environment
    16:47:01: VERBOSE[AsyncWorkerThread_1]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_1]: Initializing Asynchronous environment
    16:47:01: VERBOSE[AsyncWorkerThread_2]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[main]: SCRIPTAPI: Initialized main menu modules
    16:47:01: VERBOSE[main]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_2]: Initializing Asynchronous environment
    16:47:01: VERBOSE[AsyncWorkerThread_3]: Loading and running script from /usr/share/minetest/builtin/init.lua
    16:47:01: INFO[AsyncWorkerThread_3]: Initializing Asynchronous environment
    16:47:01: INFO[main]: Searching worlds...
    16:47:01: INFO[main]: In /home/dirk/.minetest/worlds:
    16:47:01: INFO[main]: Spielwelt
    16:47:01: INFO[main]: 1 found.
    16:47:01: VERBOSE[main]: OpenALSoundManager::maintain(): 0 playing sounds, 0 sound names loaded
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.0.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.1.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.2.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.3.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.4.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.5.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.6.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.7.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.8.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.9.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /home/dirk/.minetest/sounds/main_menu.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.0.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.1.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.2.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.3.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.4.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.5.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.6.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.7.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.8.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.9.ogg for decoding
    16:47:01: INFO[main]: Audio: Error opening /usr/share/minetest/sounds/main_menu.ogg for decoding
    16:47:01: INFO[main]: OpenALSoundManager: "main_menu" not found.
    16:47:05: INFO[main]: Audio: Deinitializing...
    16:47:05: INFO[main]: Audio: Deinitialized.
    16:47:05: INFO[main]: GUIEngine: Deinitializing scripting
    16:47:05: INFO[main]: Searching worlds...
    16:47:05: INFO[main]: In /home/dirk/.minetest/worlds:
    16:47:05: INFO[main]: Spielwelt
    16:47:05: INFO[main]: 1 found.
    16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
    16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
    16:47:05: INFO[main]: Updating configuration file: "/home/dirk/.minetest/minetest.conf"
    16:47:05: INFO[main]: Skipping writing of /home/dirk/.minetest/minetest.conf because content wouldn't be modified
    16:47:05: VERBOSE[main]: httpfetch_cleanup: cleaning up
    … or on nopaste.info for better readability.
    Since it seems to work for everyone else (otherwise there might be more replies to my quesions in several places, I guess *g*) I’m pretty sure that’s a local problem on my machine. But since gettext properly works on my machine in all and every application that use it I have no clue at all where to start debugging.
    Hints are highly appreciated Thanks in advance!
    Kind regards,
    Dirk

    Hi there...
    It gives me a URL that begins with http:// Safari does something strange, ie. flashes the page, and then complains about not recognizing photo://
    It seems that it has not figured out that it needs to open iPhoto 6.
    Regardless, the provided link is not viewable when cutting and pasting into safari, neither.
    I am using the latest and greatest 10.4.4, Safari is 2.0.3.

  • HT5097 I recently upgraded my macbook to Mountain lion.  Before doing so I used time machine and an external hard drive to back up my entire laptop.  When we upgraded my computer came back like new. All pics, music, videos documents etc gone.  How do I ge

    I recently upgraded my macbook to mountain lion.  Before doing so I used time machine to back up my entire laptop with an external hard drive. 
    When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone.  How do I get these files off the external hard drive and back onto my laptop with the new upgrade?

    I recently upgraded my macbook to mountain lion.  Before doing so I used time machine to back up my entire laptop with an external hard drive. 
    When I got my computer back it was clean....all pics, music, documents, bookmarks etc. are gone.  How do I get these files off the external hard drive and back onto my laptop with the new upgrade?

  • D-Link 562M modem does not works in Solaris 10 (?)

    I use D-Link 562M external USB 56K modem. Modem works in Windows but does not works in Solaris 10 (?). Help me!

    pat.gibbons wrote:
    Not supported yet but will be in a future Solaris Express release.Many USB modems are not really modems but the entire signal processing is done by the host computer. Such "winmodems" require signal processing software which is quite complex. I do not think that such modems are supported in the following versions of Solaris.
    If the 562M is NOT such a modem (but a "real" one) it should be quite easy to adapt a driver to work with this modem.
    Martin

  • Safari 5.0.3 on Windows XP Kerberos SSO does not work

    Our web application runs on JBoss Server 5 supports Kerberos v5 SSO. We have tested it against Firefox, IE, and Google Chrome, and they all works well.
    But Safari 5.0.3 does not work.
    Our application sends "WWW-Authenticate: Negotiate" to Safari. Safari always pops up a dialog for name and password. After I typed the name and password, and click Login, Safari send NTLM message (NTLMSSP_NEGOTIATE) to the web application, and login failed.
    Someone described that Safari supports Kerberos authentication without any additional configuration.
    I do not know what goes wrong with my environment and how to solve this issue. Your help is appreciated.
    My Safari 5.0.3 runs on Windows XP Professional Service Pack 3.
    Thanks
    Guofeng

    I'm having the same issue. Have you been able to resolve it?

Maybe you are looking for