Mouse clicks......problems

Hello.
i�m using mouse events to run some events in my apps..
but the problem is that this only occurs once in a while, and it should happen every time i give a double click...
i�m using the mouseclicked event...is i clicked twice (getmouseclick == 2), then an event is done...but this doesn�t occur always....
can this be caused because i�m clicking too fast that tha app isn�t catching the clicks?? should i use the mousepressed event??
thanx

you can not move the mouse when you click. the mouse has to stay in the same spot when you click and release.

Similar Messages

  • Right mouse click problem on T60p with WIN-XP SP3

    I have T60p model. After upgrading my WIN-XP to SP3 i am facing problem with Right mouse click. Right mouse click starts working as left click. Initially when I reboot my machine it works fine but after sometime I start getting above mentioned problem. I even installed the latest mouse drivers(ultranav) from Lenovo site. Has anyone got this same problem? Looks like Lenovo should fix this problem.
    Thanks in advance. 

    This isn't necessarily a driver problem, and it's not necessarily Lenovo's problem.
    The primary and secondary mouse buttons can be switched by a program you are running, although it wouldn't seem that this is very likely.
     Windows Start Menu | Settings | Control Panel | Mouse. This will take you to the Mouse PropertiesTabbed Dialog. Click on the Buttons tab. There you can see if the primary and secondary buttons are truly switched. If so, you can switch them back, without rebooting the machine.
    Centex

  • Magic mouse click problem.

    Hi all,
    Couldnt find any solution yet for my problem.
    It is always either not click or in click(can see the dragging box).
    No problem with connecting & tracking.
    I'm using iMac

    Hi decavalera,
    Welcome to the Apple Support Communities!
    If you are having an issue with the clicking on your Magic Mouse, please follow the troubleshooting steps in the attached article.
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    Mouse buttons do not work as expected.
    The Mouse preference pane allows users to customize the mouse features to meet their needs.
    Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
    Try using a different surface to see if the tracking improves.
    Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
    If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
    Have a great day,
    Joe

  • W510 mouse click problem

    I have a Lenovo W510 with Win 7 Pro 64bit freshly installed. When I click on the left mouse button it acts like right clicking (secondary click) and right mouse button does nothing. Tapping on the trackpad does the same. Even when I plug in a USB mouse it acts the same way so this seems to me like a driver issue of some sort. I have checked the Mouse Properties and Left click is set to Primary click and Right click is set to Secondary click as this is the default in a new installation.
    I have upgraded the BIOS and have installed XP, Win 7 and Server 08 R2 and still have this problem. I actually see the problem during the installation as well before the OS is even installed.
    Any help as to what could be causing this would be greatly appreciated.

    It's possible that one of the sets of keys is erroneously sending a click signal all the time. Try disabling the touchpad in BIOS and/or swapping the keyboard.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Trackpad and Mouse click problem!! PLEASE HELP!

    I have been having this weird problem which is having to click several times on something of it to work. Mostly I have the problem with Safari and sibelius 6.0 which I work with.It doesn't click and its frustrating.I bet its not the trackpad as I happen to have a magic mouse and it's the same with that too.I have to click several times on for example "Close" the tab button for it to work.
    PLEASE HELP!

    Kirstiee, login to another User account and test it in there.
    sahba99, you would need to drag the whole preference folder to the Desktop and reboot. If it works, you know it's a preference file in that folder. Keep dragging a bunch back at a time and reboot (or log out and back in) until you narrow it down to the corrupt file. It's kind of like troubleshooting an extension conflict back in the pre-OS X days.
    Dave M.
    MacOSG v.2.0 coming April 1, 2010! No fooling! Check it out!
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Magic Mouse Clicking Problems

    Hello, I've just noticed that the far right side of my Magic Mouse stopped to trigger a proper click, thus I cant really make right clicks any more, only if I press it down quite strongly. My Magic Mouse is now a few months old and I've actually never experienced any problems before.
    I could imagine that dust and dirt accumulated in this small slit that goes around the mouse prevents the click. Is there any way to open the Magic Mouse in order to clean it?

    I got exactly the same problem, but the folded paper solution did not work.
    ¿Any suggestions?
    Thanks for your time
    Regards

  • Wesnoth and mouse clicking problem

    As it says, my mouse suddenly stopped answering when I click.  Mouse works fine on any other program.

    spektre wrote:I have the exact same bug, but it worked fine before I did an update earlier today.
    I use the touchpad on my eee, no wired nor wireless mouse, don't think that has anything to do with it.
    Ah me too actually I did an upgrade and looking at pacman log I upgraded those packages:
    [2009-10-31 13:26] upgraded bash (4.0.033-1 -> 4.0.035-1)
    [2009-10-31 13:26] upgraded enca (1.11-1 -> 1.12-1)
    [2009-10-31 13:26] upgraded xulrunner (1.9.1.3-2 -> 1.9.1.4-1)
    [2009-10-31 13:26] upgraded firefox (3.5.3-1 -> 3.5.4-1)
    [2009-10-31 13:26] upgraded gd (2.0.35-2 -> 2.0.36RC1-1)
    [2009-10-31 13:26] upgraded kernel-headers (2.6.31.4-1 -> 2.6.31.4-2)
    [2009-10-31 13:26] upgraded lib32-glibc (2.10.1-4 -> 2.10.1-5)
    [2009-10-31 13:26] upgraded openssh (5.3p1-1 -> 5.3p1-2)
    [2009-10-31 13:26] Updating font cache... done.
    [2009-10-31 13:26] installed ttf-freefont (20090104-2)
    [2009-10-31 13:26] upgraded vlc (1.0.2-3 -> 1.0.2-5)
    Last edited by marxav (2009-11-02 22:37:20)

  • Jfreechart line chart mouse click problem

    i need to implement a line chart where users can click on an area of the chart and highlight it, i have serveral questions regarding how to do this:
    i added a mouselistener to the chartpanel, i can get the points with e.getTrigger().getPoint(), but I need the points associated with the graph point, is that possible?
    i also need to highlight an area of the line chart, I have no idea where to begin, will i be able to change the background of a specific range of points?
    help would be appreciated!!

    Hi,
    I have not tested your code, but check these links. This might help.
    http://blogs.adobe.com/flexdoc/2009/07/date_range_selection_for_flex.html
    http://www.stretchmedia.ca/code_examples/chart_range_selection/main.html

  • OS X 10.10.2 Secondary mouse click problem

    Hi I just updated to OS X 10.10.2 and I've been noticing that I cannot right click with 2 fingers. At first when I had 10.10.1 I could right click by clicking the bottom right of the trackpad AND by tapping with 2 fingers, but after updating to 10.10.2 I can only either right click by clicking the bottom right, or tap by 2 fingers; I can't do both at the same time. Your help is appreciated.

    Hi Paul,
    What kind of response do you get when using telnet in the terminal:
    telnet 127.0.0.1 25 or telnet 127.0.0.1 587
    That should give you access to your mailserver and the mailserver should respond. Does it?
    If it doesn't, what does sudo serveradmin fullstatus mail say?
    SMTP incoming and outgoing should say running in this overview.
    Port 465 is optional and is not open by default but 587 should be open when you configure mail.
    So externally use yougetsignal.com and mxtoolbox.com to verify external access.
    Goodluck and let me know what the server locally responds to.
    Jeffrey
    StarPine Support

  • Hello  Simple problem - don,t know how to solve it.  With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

    Hello
    Simple problem - don,t know how to solve it.
    With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
    I was like ????#$%?&*(???
    Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
    Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! -  is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
    The problem is that scrolling is enable while clicking and it bugs.
    How to disable it ??
    Simple question - can't find the answer !

    Helllooo !?
    sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
    Thanks !!

  • Problems with mouse clicks..

    Hello.
    i�m having problems with the mouse clicks in a component...
    i have events that occur when a click is given and others when 2 clicks are given, but these events occurs only once a while....it�s not always that they occur...
    can anyone help me with it?? it�s very strange...
    thanx

    How about copy and pasting your mouseClicked or mousePressed methods. Are you sure you know the difference between a click and a press?

  • Mouse click count problem..

    Hi Development Team..
    I have a problem while getting the number of mouse clicks.In our application for single click on one button it is performing some functionality and by double clicking the same button it is performing other functionality.Noe the problem is if i double click the button the functionality for single click and double click functionality both are performing.
    Now i am trying to print the mouse clickcount for double click it is printing both ..1 , 2
    if(me.clickCount()==1)
    System.out.println("You Clicked Single Click");
    else if(me.clickCount()==2)
    System.out.println("You Clicked Double Click");
    Out Put :
    You Clicked Single Click
    You Clicked Double Click
    Both Statements are printing ..
    But i want for Double click it should print 'You Clicked Double Click'
    Please rectify the problem ....
    Thanking you in ADVANCE..
    Vivek
    }

    Shiridi_Sai_Baba wrote:
    Please rectify the problem ....Yes, of course, right away. I mean, obviously, there are lots of people here that are only waiting for you to tell them to rectify your problems.
    Especially so, since you couldn't be bothered to search the forum before posting because this is of course a problem that no one else could ever have come across before.
    Just for reference, this [http://forums.sun.com/thread.jspa?forumID=31&threadID=781650] is the very first hit when searching for "mouse double click".

  • Magic Mouse Left Click Problem

    I got a Magic Mouse for Christmas this morning and set up with my Macbook Pro. The setup went quickly and well. I was able to move the cursor around my screen with the Magic Mouse.
    However, the click buttons don't work. I have tried left and right clicking and nothing happens.
    Is there a problem with my mouse or did I miss something in the setup?
    Thanks.

    I had the same problem this evening. Is it possible that you had your USB or trackpad mouse buttons reversed when you switched to the Bluetooth mouse?
    I normally reverse my mouse buttons (like for left handed people). My index finger naturally rests on the upper right corner of the mouse. When I try to use the normal button config, my hand and forearm fatigue in no time. Reversing the buttons allows me keep my index finger relaxed for all the normal mouse clicking, then I reach left for the "right" button.
    It also discourages others from using my computer!
    Anyhow... When I connected to the Magic Mouse, the buttons didn't work. I turned it off and connected the USB mouse, returned it to "right-handed" mode and switched back to the Magic Mouse, and the buttons work correctly now. I then use the Magic Mouse control panel to set Secondary click to left.
    Hope that helps!
    Ken

  • Problems with mighty mouse clicking

    Hi everybody, happy New Year first of all!
    Then my problem: I bought an Intel iMac about 1 year ago, and have been using the supplied wired mighty mouse since then. I set it up with left+right top buttons.
    I didn't have a single problem until a few weeks ago.
    First, the "typycal dirty scrolling ball" which seems to be solved by rubbing the ball on a piece of papere with the mouse up side down.
    Second, and most annoying, *the click functions seems to perform worse than before*. I mean, it looks like *I need more pressure now to have the mouse click* (either left or right) on links, icons, etc.
    Result: about half of the times, clicking the mouse (using the pressure I was used to) has no effort, I need to re-click with more intensity.
    Did anybody of you experience the same problem? I cannot understand if it is kind of software problem (say, something that can be solved by some restore function) or a physical one (dirt? But the mighty mouse cannot be unassembled...).
    TIA to all,
    Giopad65

    Hello and Welcome to Apple Discussions ...
    Fist, here are the instructions to clean a Might Mouse: http://support.apple.com/kb/HT1537
    and here: http://www.macosxhints.com/article.php?story=20060210115417864&lsrc=osxh
    Second, go to System Preferences/Keyboard&Mouse/Mouse and make sure your Tracking/Scrolling and Double Clicking is set to your liking. (The System Preferences panel is located in your Applications folder)
    Carolyn
    Message was edited by: Carolyn Samit

  • Problems using right-mouse click functionality in a Captivate added to Articulate?

    Has anyone experienced any problems using the right-mouse click functionality? It's working fine when I preview the project, or view the published Captivate SWF or HTML file, but it's not working when I insert the published Flash file into Articulate and then try it in the published Articulate. I'm using AS2 and Flash Player v10. When I try to right-click it's bringing up the Flash Settings menu you can click on. I've been into my Flash Manager and told it to always allow content from the folder my Articulate is in but that hasn't made any difference. I'm viewing the Articulate on my C drive and I have read that that can cause problems - does anyone have any ideas? If I left-click it recognises it as a click but doesn't recognise it as the correct click action, so just keeps on bringing up my failure caption and won't allow me to progress.
    Thank you!

    Hello,
    The right-click functionality in Captivate is 'in' the JS-file, that is called by the HTML-file that will open the SWF. But if you insert the SWF-file in Presenter (Articulate or Adobe) the right-click functionality will not be there, because you are not using the JS-file. BTW: this was also explained in the thread where you posted this same question before. Please, do not post the same question in 2 different threads
    Lilybiri

  • Beginner - mouse over IE line -  and click problem

    My test swf - -
    http://www.jennyweir.com/testSite/
    How would I remove that white mouseover white line near the
    edges of the page (as seen on IE7)
    I made the swf full screen to try to get it to dissapear -
    but full screen is apparently only nearly full screen and it is
    still there
    I would like to learn how to make an swf which can live
    seamlessly in a matching html page so would appreciate knowing what
    to do. There is a setting I chose which I thought would fix it
    (show border) but it has not worked
    Also - click problem:
    in Flash, I made a fill layer into a button (100% size also
    and under the visible elements ) so that I could attach a goto url
    action (up)
    on this swf you have to click twice to go to the url
    I dont follow how this has come to be
    appreciate any pointers
    gav

    Hi Gavlong
    Did you try adding the background color parameter in the HTML
    of your page? This is different than the background in the Flash
    file. I looked at the source for your page and I didn't see it.
    Regarding your double-click problem it may be due to an
    Internet Explorer update from earlier in the year. I've read a few
    bits about how for some interactive web apps (Flash is included in
    the list of affected programs) the user needs to 'activate' the
    control by pressing SPACEBAR or ENTER. That would explain the need
    for the second click. Apparently there's a way to enable the
    control from your web page by using and external .js file but I
    haven't implemented it. Here are a couple of related
    links...hopefully they are of some help:
    http://msdn.microsoft.com/library/default.asp?url=/workshop/author/dhtml/overview/activati ng_activex.asp
    http://msdn.microsoft.com/ieupdate/
    http://www.adobe.com/devnet/activecontent/articles/devletter.html
    -WD

Maybe you are looking for