.mov file from Canon 5D Mark II file blurry in Timeline

Haven't use FC in quite a while, so I'm a bit rusty.
When I import a clip into FC, it looks fine in the Viewer, but when I move it into the timeline it looks blurry in the Canvas. It remains blurry even after rendering and even after exporting with no compression. The file is a .mov file from a Canon 5D Mark II. I tried exporting it from QT as a QT file with no compression, as well as just importing the uncompressed .mov file, but nothing works. I'm sure it's something simple.
Thanks for any help!
Message was edited by: Nancy Brown

Yes, I have the movie in Streamclip now, but am not sure what settings to use to export it and what codec to use.
_QT info -_
Format: H.264, 1920 x 1080, Millions
16-bit Integer (Little Endian),
Stereo (L R), 48.000 kHz
FPS: 29.97
Data Size: 342.35
Data Rate: 47.24 mbits/s
Normal Size 1920 x 1080 pixels
Current Size 1920 x 1080 pixels (Actual)

Similar Messages

H.264 mov files from Canon 5D Mark II running at incorrect speed?

What is causing the mov. files recorded at 25 fps Imported from a Canon 5D Mark II
PAL to run at 2.5 fps on the Timeline of Premiere Pro ? And it looks like it.This all happened after the Firmware Upgrade 2.0.4
The camera is recording at the right speed according to the LCD and it runs correctly in Premiere Elements ?.
Message was edited by: Bob Dix

Interesting approach., Canon seem to think it might be the camera ? Which I
doubt because the mov H264 files are easily opened in Premiere Elements and
work very well., I am reluctant to send it back as I think the Problem is in
Premiere but, where ?
Regards,
Bob
AUSTRALIA
0746322996
Mobile 0405728925
0439186228
Ps . The problem is not fixed, Canon Australia is looking at the issue, the Canon EOS 5 D Mark II is recording at 25 fps. They believe the problem is within Adobe Premier Pro ? Perhaps even a computer problem any ideas.
Message was edited by: Bob Dix

Having issues opening raw files from Canon 5D Mark iii in Photoshop CS5

I cannot open RAW files from a Canon 5D Mark III in Photoshop CS5. I get an error saying "
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information."
Documentation seems to be no help.
Any ideas?

You can download the updates manually and try to install them Adobe - Photoshop : For Macintosh
If you can not get CS5 updated you may want to consider Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Search Results
1 (800) 833-6687Adobe Systems, Customer service

Unable to open CR2 RAW file from canon 5D mark III

Installed cs6 which seemed to be working just fine until I attempted to open a CR2 file from a canon 5D Mark III, will not open, checked for RAW updates, nothing.

Hello, you will need to install Camera Raw 7.1 RC available in the labs: http://labs.adobe.com/technologies/cameraraw7-1/

Unable to download Raw files from Canon 5D Mark III. [was:Blue flower]

When I download my raw images from my canon eos 5d mark 3 I get a blue flower and no image.
How do I fix this.

Which Adobe program?
Which version?

Are there issues with DNG Converter reading CR2 files from Canon 5D Mark III?

I am having problems similar to what's detailed at http://forums.adobe.com/message/4356184 (which unfortunately provides no explanation/solution) ... I choose the file where my CR2 RAW files are and try to convert but it tells me there are no files to convert. Only differences are I'm on Windows not a Mac, and I'm using Elements 9 not 10.

Let's continue to use that same forum thread for this conversation.

HT3825 How to view RAW from Canon 5D mark III for OS 10.6

To 'Preview' RAW files from Canon 5D mark III, it is known that you need to install the Digital Camera RAW Compatibility Update 3.12 , but it can only be used with iphoto 9, which in turn only work in OS 10.7, so there is no way for 10.6 users to 'Preview' the RAW files? Please help if you no any other ways, thank you!

Which Adobe program?
Which version?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
Where can I read about it on Adobe web site?
I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

1080p30 .mov files from canon eos 5DMarkII in Final cut express 4.0.1

Hi everybody.
i need some help to import HD vidéo .mov files from Canon Eos 5DMarkII in final cut express.
The files is in 1080p30 (h264) like avchd but in the final cut configuration i have only 50i and 60i option in HDV and AVCHD
Final cut necessity to do a render (5h for 15min on my G5) and the movement quality is not the same.
Anybody have a idea to import Progressive files in final cut ?
maybe they have an update with new avchd 1080p codec in configuration ?
or i need final cut pro...?
Thanks in advance
and sorry for my english...i'm french

There is no good solution for working with this camera in FCE. It's 30fps progressive. There is no true video format that is 30fps. This is something Canon was cobbled together for this stills camera.
You can use MPEG Streamclip to convert the material to QuickTime using the Apple Intermediate Codec at 1920x1080. I think that's what it shoot. You should check the camera manual to confirm it shoots 1920 and not 1440.
The problem is the frame rate. You can convert it to 29.97fps or to 25fps. 25fps conforms to the European frame rate, but I don't know how well Streamclip will do this conversion. You also need to make sure the material is not interlaced by Streamclip.
The other problem is that FCE handles 1080 as an interlaced format, because for production it's supposed to be an interlaced format, at least in the formats, HDV and AVCHD, that FCE works with. You can set your sequence properties to have no field dominance, which should prevent it interlacing during compositing of any effects.

Must I use a converter program to import movie files from Canon powershot s95?

Must I use a converter program to import movie files from Canon powershot s95?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
With Elements 11 you cannot.
The SX60 HS was first supported in Camera Raw 8.7 which is only compatible with Elements 13 and later.
Options:
Pay to upgrade to Elements 13
Free option: download the Adobe DNG converter, convert all SX60 HS Raw files to DNG format then edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

Import files from canon 5Dmark111

Importing footage from canon 5D mark 111, in log and transfer won't allow me to import. i was advised to first compress footage on compressor, would that render importable files.
maybe won't import because there are some JPEG files amongst the mov files.???

Sorry, log and transfer won't work with the Mark III....the plugin doesn't list it on the supported cameras. You need to use COMPRESSOR and the ProRes 422 for Progressive presets.

CS6/ACR 7.x not recognizing Canon 5d Mark 3 files previously edited in same version. Help?

Why are my previously edited canon 5d mark 3 raw xmp files no longer recognized and all sliders set to zero? I can see the xmp files associated with the raw file in their folder. The files were originally edited in CS6/ACR 7.x -in July 2012 - and recently re-opened in the same CS6/ACR 7.x.
The canon 5d mark 2 files from the same time/event are showing up fine. I have updated everything, but both before and after the update, same issue with the Mark 3 files.
On a side note:
We have found that opening mark 2 files (that were originally edited in CS4 / ACR 5.7) in CS 6 / ACR 7.x and making any changes such as color coding causes all previous xmp information being zero'd out in the mark 2 xmp file. Not sure if this is a symptom of the same problem? Except the difference here is the Mark 3 files have never been touched outside of version CS6/ACR7.x - however the folder which holds both mark 2 & mark 3 files from the same event has been opened in the CS4 / ACR 5.7 window but without touching the files. By opening the folder in CS4 I can see that the Mark 3 files aren't reading and then know this event was originally edited in CS6/ACR 7.x
Specifics:
PS CS6 13.0.4 x64
Mac OSX 10.6.8
Canon 5d Mark 3 Raw files
This is the first time in these circumsances that this issue has presented itself.
Any insight would be much appreciated
Thank you!

First check to make sure your view mode in ACR is set to Image Settings, not Camera Raw Defaults. This is accessible as the top item or three in the menu that comes up when you click the little threelines-arrow icon at the right of the tabs title bar, for example to the right of the word Basic.
Otherwise, did you switch your Camera Raw settings location to be the central database instead of XMP files and/or are you on a different computer that might have a different metadata storage location?
Open up one of the XMP files in a text editor, perhaps one that hasn’t had a picture opened for it, recently, yet, and see if you see any non-zero settings. Also take note of the last file creation time. This will help determine if the XMP files, themselves, have been written with ACR defaults or if they are just being ignored.
Also, check the date and timestamps of a CR2 and XMP file that hasn’t been opened, recently, and see if the XMP date/time is before the CR2 date/time. There has been a bug, not sure in LR or PS, where if the XMP file date is BEFORE the raw-file date, then the XMP is ignored so maybe that could be happening. If it is a LR bug, then have the files been edited in LR, which might have ignored the XMP files and the rewritten things with the LR default settings?
If no explanation can be found on your side, can you zip up a raw and its corresponding XMP, preferably one that’s not been looked at, recently, then put them online somewhere like http://www.dropbox.com/ and reply with the public download link, so others can take a look?
What version of Camera Raw are you using? ACXR 7.4 just came out this week.

Does "RAW files from Canon digital cameras cannot be downloaded" MATTER??

Need to buy new camera to use with my G5 and iPHoto 5. I desire (1) affordability, (2) more optical zoom than what I've had in past (want to move from 4x to 6x), and (3) compatible with my G5.
I've had 2 canon powershost (my last, the 570, but a kid dropped it). Easy to use. So maybe simliar, or something nicer.
Been studying the Canon web site about their various cameras. For the above reasons I like thePowerShot SX100 IS, about $240. 6x optical zoom.
HOWEVER, in the MAC OSX compatibility section at Canon it has this quote:
* Mac OS X 10.1 and newer come with Image Capture drivers that support most of Canon's digital cameras with USB interfaces. When a compatible camera is connected to a compatible Mac computer running OS X 10.1 and newer, the computer detects the camera and automatically launches Image Capture. This Apple program allows JPEG images in the camera to be downloaded to the Macintosh. NOTE: RAW files from Canon digital cameras cannot be downloaded in OS X via Image Capture. We suggest the use of File Viewer Utility or an external card reader. Also, movie files shot with PowerShot cameras cannot be downloaded in OS X via Image Capture or iPhoto. We suggest the use of ImageBrowser or an external card reader.
Additionally, Image Capture can access JPEG images directly from a CompactFlash card using an OS X-compatible card reader or using a PC Card Adapter in the PC Card slot of an Apple PowerBook.**
This line caught me confused: *RAW files from Canon digital cameras cannot be downloaded*
In the past, I just plugged in the Canon Camera, and iPhoto 5 opened, and I h appily downloaded the picts and off and away I was.
Will this still happen??? And if I'm not getting the "RAW" picts (whatever that is), but just the JPEGS I'm used to, am I not getting "all" the picts, or the best that my camera could be given me for eventually printing?
Am I worrying about nothing?
Finally, any camera suggestions? Under $300 , super picts, 5-10x zoom, and friendly with my Mac
Thanks
JON

Jon
You know, because you ask the question, I'll guess that it won't really matter to you...
Every camera shoots RAW - that's the total information that the sensor on the camera sees, but mid- and lower end cameras process this RAW data into an easy to use format such as jpegs.
Many (but not all) Pros demand that the camera provide all the data to the computer, so that the photographer can process the images him/her self. For most casual and family users this is not an issue. For the serious hobbyist and the Pro it might well be.
For more on Raw have a look at this:
http://en.wikipedia.org/wiki/Rawimageformat
Btw, later versions of iPhoto do work with Some Raw formats.
As to cameras:
I used a Canon S2 IS for a couple of years and found it really good. There's and S3 and an S5 now too. Currently I'm using a Panasonic FZ8. I really like it.
Regards
TD

Reading raw files from Canon 70D

I have Photoshop Elements 11 and just got a Canon 70D. How can I get the program to read the raw files?

Jo_vdh wrote:
if I understand correctly, the only way to open the CR2 files from canon 70D is upgrade to PSE12.
No. Adobe offer the free DNG converter that will convert those CR2 files to Adobe's DNG RAW format that can be opened in PSE11, or pretty much any version of PSE going back five or more years.
Jo_vdh wrote:
it's already kind of worthless.
The Organizer and the Editor still do everything they did when you bought the product and Adobe provide a continuing solution to enable RAW processing in older versions of the software so I don't see how it has suddenly become worthless?
And noting that you bought it the month after PSE12 was released I hope you got it heavily discounted.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

.mov file from Canon 5D Mark II file blurry in Timeline

Similar Messages

Maybe you are looking for