Move automation data at same time in differenct tracks?

hi , anyone here can give me some sugesstion ?
I want to move the automation data in different track at same time but i cannot find how to make it .
I have 7 tracks all written automation volumn data , and now I want to move them all 3 db down in some bars, it seems that i must move the automation one by one ?
Thanks!

danseq wrote:
Unfortunately Logic doesn't yet have a trim or update mode, otherwise you could do it by using the group function on the fader channels, and using a fader movement.
What?! Really? My copy of Logic is on its way; I'm switching from SONAR and that's basically how I mix. Volume envelopes on tracks deal with automation along a track, then the track volume slider acts as an offset to those envelope-controlled volume changes, when it comes to mixing tracks together, and I realise that the whole vocal track, say, needs to be 3dB quieter just to start mixing...
So, how best to achieve this in Logic then? Do I have to route tracks to busses and mix from there? Essentially duplicating my tracks in bus-form seems like a bit of an unnecessary step! Any helpful suggestions will be welcome, but please don't flame me. I'm sure I'll be able to figure out a new workflow once I get my hands on Logic and start using it myself!

Similar Messages

Insert or Cut Time and move automation data - how to do it?

Hi when I cut or insert time it moves the regions but not the automation data. I have tried switching nn 'move automation with regions' but it doesn't move the automation that goes past the end f regions eg plug in settings like delay feedbacks etc.
a) this seems to me to be really crazy - why if you had done a lot of detailed automation programming at the end of a song would you not want it to move if you cut 4 bars from earlier on in the song?
any ideas appreciated very much!!
best
tommy b

after using logic for years I have discovered a new bit and something very weird.
New Bit:
As well as Cut/Insert Time in the Region Menu
there is a Cut/Insert Time in the Edit menu.
if I start here:
http://www.applebananacarrot.com/downloads/pre.jpg
if I do the region Cut ( from the region menu on the arrange window):
look what happens to the automation data on track 21
http://www.applebananacarrot.com/downloads/postregioncut.jpg (track 21 data didn't move)
and compare it to this one doing everything else the same but using the Cut from the main logic edit menu.
http://www.applebananacarrot.com/downloads/posteditcut.jpg Track 21 automation data did move.
That to me seems wrong....
whaddya think?
best
tommy banana

How do i export multiple full resolution movie files at the same time in final cut pro 6?

I've been using Final Cut Pro since version 3 came out, know the program well, have even had jobs consisting of just operating the program. I'm currently running version 6 because that's the latest one that works on my computer. Back in verison 3, there used to be an option under Export to export a "Final Cut Pro" movie, which was really a Quicktime movie but appeared with a FCP icon and defaulted to opening in FCP, but the important thing about it is that it was a full resolution copy of the movie with no compression. Now, that option seems to have been changed to "export Quicktime movie." In my opinion that change is kind of stupid since it is so much less specific and is even less of an implication that one is exporting a full resolution file. But in fact you are.
One also has the option of using Compressor to export a version of a movie, and therein there are so many different options that if you are not confused by it I think there's something wrong with you. Moreover, it would appear that there is no equivalent of exporting a full resolution version of a file in Compressor. Fair enough: a full-resolution file involves no compression so is not appropriate for "Compressor." BUT, suppose you want to export multiple uncompressed, full-resolution movies at once. When you use Compressor, you are able to create batch lists and export many things at the same time, for instance, lists that will take many hours to complete so you can go to bed and get the results the next day. But as far as I can tell there is no way to do this at full resolution without compression. Instead you have to sit at the computer waiting for each one to finish and after each one, manually go to the next and select "export Quicktime movie." Even if there is a way to do this I would complain that such an obviously desireable thing is so unaccessable. In fact, the only reason I've typed out my question at such length is because I'm stuck here waiting for each one of my movies to export.
Anyway, all my complaints aside, anyone know how to do this?

what you're missing to export multiple files is the batch export command available in the file menu or by control clicking on the items in the browser. You can export multiple sequences/clips at full resolution with this.
This has been available in fcp for a long long time.
Wow, you are right. Now that you mention it, I can't believe I never noticed that. Thanks.
Only if you have the 'Self-Contained' box checked. Otherwise you'll end up with a reference movie.
Correct. That box is typically checked by default. There are other default settings you could change that would not result in a full-quality version, but what I meant was hitting that option from the pull-down menu, then changing nothing and hitting ok.

Lack of voice and data at same time is killing me

after using a treo 750 (WM 6.1) on att for the last three years I guess I didn't realize the benefit of having ATT and gsm in general. There are plenty of downsides...mainly pricing for single accounts (however their family plan was directly on par with sprint's). I am constantly trying to use data apps while talking on the phone to no avail. I started off just thinking I could do without, but a week later, I still really really miss it. My wife does too...as it is her I am usually giving directions or other web information to while on the phone. There was nothing like google map's satellite view to help someone verify they are at the right place..."see a large tree on your right with a tall brown building behind it, yep that's the one" Anyone else have this feeling? Wifi isn't an option for me most of the time.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Voice and data simultaneously is not available while using any CDMA network due to network limitations. This is true for all types of phones, not just Palm or not just the Pre. Your example of checking email or using google maps, the gps data may have been stored before activating the call. try browsing the web while making a call, and try to go to a web page you've never visited before, so that you know it can't be a cashed version of the page.

How do you use voice and data at same time?

I'm on a call and need to look up data from a file also on my phone. What's the simplest and most effective way to simultaneously do this? Thanks in advance.

If you're with Verizon, you can only do this in a wifi area.
The simplest way is to tap the home button and then tap the icon of what you want to do. You'll either have to use speakerphone or an earpiece in order to see the screen .

HitTest for multiple Movie Clip at the same time

I have a movie it is a triangle.I duplicate it and I want to hitTest on the first triangle movie clip and I added 3 different line movie clips on the 3 side of triangle.I tried to write a code something like that.
if(firstTriangle_mc.hitTestObject(line1_mc,line2_mc,line_3mc){
trace("Ok");
but I've got error.I think it is not allowed hitTestObject for multiple Movie Clips.So is there anyone have an opinion about it?What should I do?

Here is another test for multiple movie clips for hitTestPoint but only the first work the others don't
uc_mc.addEventListener(Event.ENTER_FRAME,hitle);
function hitle(e:Event) {
if (uc_mc.hitTestPoint(cub1,cub1Y,true)&&(cub2,cub2Y,true)&&(cub3,cub3Y,true)) {
uc_mc.alpha=0.5;
}else{
uc_mc.alpha=1;
The code above doesn't work.What should I do?

Spin object and move it at the same time...

I am trying to have two polaroid pictures slide across the screen into position, I've used keyframes to accomplish this. But I want to add a little spin as the move but when I apply change the rotation at the keyframe it changes the rotation for the entire timeline not just at that keyframe. So I tried to apply spin and it cancelled out the keyframe movement. I couldn't even drag it on the screen it was stuck in position. How can i fix this. Thank you for your help.

The record button merely tells Motion to begin applying keyframes to changes in a parameter different from it's starting values. If you don't tell Motion where you want it to begin the changes from, it'll assume you want the animation to begin from the start of the clip.
Go to the place where you want the spin to start. OPT+click the rotation parameter to add a keyframe. Turn on the record button (A). Go to where you want the spin to end. Adjust the value to the rotation parameter.
Andy

Move two splitters in same time

hi all,
here is my problem: in the attached VI, when the right splitter is moved, I want that the left splitter follows the right splitter. since there is not event for drag-drop splitter, i have no idea to do that. any suggestions?
Cedric
Attachments:
two-splitter.vi ‏10 KB

There are mouse down and mouse up events. As well as mouse leave for the splitters.
You should be able to work with them to determine if a drag has occurred.

2 cards at the same time for 4 track recording?

I have several Sound Blaster Li've! cards and was wondering if they can be used to do more that 2 track simultanious recording.
I'm trying to set something up for a local non-profit and use what is available rather than using their (practically non-existant) budget to purchase a multi-input card. We have 4 cards available (all SB Li've!) and I remember something about being able to gang the inputs through an auxillary channel to record more than 2 tracks at a time. Recording will be done under Reaper or Audigy in Win XP, or Reaper under Ubuntu 0.4.
Thanks in advance
Mike

yes I have! both actually.
I didn't even think about the driver side, just wondered if there was a hardware conflict first.
Now that you mention it that probably is the easiest way to go about it, Jack under Ubuntu would probably work as well.
thanks for the idea, now to go plug in a couple of cards

Open two movies at the same time

It seems that it is not possible to open two movies (.cp) at
the same time with Captivate 1 (well you can run a new Captivate
program an open the second movie) but will it be possible to open
more than one movie at the same time in Captivate 2?
Thanks

Hello hydrosound,
Whilst you cannot open two Captivate movies in the same
instance of Macromedia Captivate, you can get around this by simply
loading another copy of Captivate. I do this all the time and open
the second project file that way.
HTH
Regards,
Mark

How do I move all of the control points at the same time at the Path Text preset?

I'm doing motion typography, I used the Bezier Shape Type, it has 4 control points, I saved the custom preset I made, but the problem is, is it possible to move them at the same time? I'm animating per letter to form a word.
Additional Question: Is it possible to add more control points? If then, how?
Thanks in advanced.

Double-click the path shape to invoke the transform box. Read up on how to use the path tools to insert and modify points.
Mylenium

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

How do I copy automation data on multiple aux tracks?

Hi. Can anybody tell me how I can move/copy/paste automation data that exists on multiple Aux tracks at the same time as I move/copy/paste midi and audio regions?
Currently I can move/copy/paste multiple midi and audio regions at the same time, and if they also have automation data with them this also gets moved/copied/pasted, BUT its the automation data on Aux tracks which doesnt.
e.g. If I use 'Select Inside Locators' and then alt/drag the regions, Logic refuses to select the automation data on any of my Aux tracks too- so these get left out and I have to manually select each one and copy and paste it by hand which takes ages and is very fiddley.
Does anybody know how to do this?
Many thanks,
Al.

ctrl-cmd-E does not work? And cmd-1 doesn't work either?
Let's hope then that alt-K works, because that is where you can set keycommands. Any of the presets in the dropdown menu top left contains the commands you need.
I just did it myself, to check it; every keycommand preset there is, contains both combo's I've given.
I have no idea if there's a menu item for the Automation Event list, I guess there should be since there's no • in front of it (• before a command meaning it has no menu item), but I cannot find it, and I don't even know if it works using menu items. cmd-1 should work, always, but it's also under Window>Arrange.

Why can't I rotate multiple points in puppet warp at the same time?

You can rotate single points in puppet warp, and you can shift+click to select multiple points and move them at the same time but I see no way to rotate multiple points as one group using puppet warp. This would be a very helpful feature I think should be added.

Please post Bug Reports and Feature Requests over at
http://feedback.photoshop.com/photoshop_family/

Problem in rotating and moving image at the same time

the problem is that im making a car game(2D) in which u have upper view of car.
i have make the car rotate bt problem is that i canot move it forward or backward correctly
.wen i move it forward or backward i goes wrong...
nd another problem is that i cannot both rotate and move the car at same time
example if i press both up nd right arrow keys i doesnt move nd rotate..
nd also plz tell me the accelerate nd reverse method so i can speedup my car like other car games
here is the code
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.geom.*;
import java.applet.*;
import java.net.URL;
public class RaceGame extends JComponent
static int x=560;
static int y=410;
static int currentAngle=0;
static double hspeed,vspeed;
static int carspeed=1;
Image car;
//int angle=car.getAngle();
Image getImage(String filename)
URL url = getClass().getResource(filename);
ImageIcon icon = new ImageIcon(url);
return icon.getImage();
//Rectangle2D.Float rect=new Rectangle2D.Float(x,y,30,30);
//Rectangle rect=new Rectangle(x,y,30,30);
public RaceGame()
car=getImage("car1.jpeg");
public void CreateBase()
JFrame frame=new JFrame("Dare2Race");
frame.setBounds(70,30,650,500);
frame.setVisible(true);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container c=frame.getContentPane();
c.add(new RaceGame());
frame.addKeyListener(new adapter());
c.setBackground(Color.BLACK);
//JLabel finish=new JLabel("FINISH");
//c.add(finish);
public void rotate()
currentAngle+=1;
if(currentAngle>=360)
currentAngle=0;
repaint();
public void paint(Graphics g)
super.paint(g);
Graphics2D g2d=(Graphics2D)g;
AffineTransform origXform=g2d.getTransform();
AffineTransform newXform=(AffineTransform)(origXform.clone());
newXform.rotate(Math.toRadians(currentAngle),x,y);
g2d.setTransform(newXform);
g2d.drawImage(car,x,y,this);
g2d.setTransform(origXform);
g.setColor(Color.WHITE);
g.drawLine(640,380,420,380);
g.drawLine(640,460,320,460);
g.drawLine(420,380,420,300);
g.drawLine(320,460,320,380);
g.drawLine(420,300,125,300);
g.drawLine(320,380,230,380);
g.drawLine(230,380,230,460);
g.drawLine(230,460,2,460);
g.drawLine(125,300,125,370);
g.drawLine(125,370,105,370);
g.drawLine(2,460,2,180);
g.drawLine(105,370,105,300);
g.drawLine(2,180,450,180);
g.drawLine(105,300,105,250);
g.drawLine(105,250,550,250);
g.drawLine(550,250,550,20);
g.drawLine(550,20,275,20);
g.drawLine(450,180,450,100);
g.drawLine(450,100,360,100);
g.drawLine(360,100,360,160);
g.drawLine(360,160,10,160);
g.drawLine(10,160,10,30);
g.drawLine(275,20,275,90);
g.drawLine(275,90,110,90);
g.drawLine(110,90,110,30);
repaint();
class adapter extends KeyAdapter
public void keyPressed(KeyEvent e)
switch(e.getKeyCode())
case KeyEvent.VK_LEFT:
currentAngle--;
repaint();
break;
case KeyEvent.VK_RIGHT:
currentAngle++;
repaint();
break;
case KeyEvent.VK_UP:
carspeed++;
hspeed=((double)carspeed)*Math.cos(currentAngle);
vspeed=((double)carspeed)*Math.sin(currentAngle);
x = x - (int) hspeed;
y = y - (int) vspeed;
repaint();
break;
case KeyEvent.VK_DOWN:
carspeed--;
hspeed=((double)carspeed)*Math.cos(currentAngle);
vspeed=((double)carspeed)*Math.sin(currentAngle);
x = x + (int)hspeed;
y = y + (int)vspeed;
repaint();
break;
public static void main(String[]args)
RaceGame race=new RaceGame();
race.CreateBase();
//race.setDoubleBuffered(true);
}

the problem is that im making a car game(2D) in which u have upper view of car.
i have make the car rotate bt problem is that i canot move it forward or backward correctly
.wen i move it forward or backward i goes wrong...
nd another problem is that i cannot both rotate and move the car at same time
example if i press both up nd right arrow keys i doesnt move nd rotate..
nd also plz tell me the accelerate nd reverse method so i can speedup my car like other car games
plz help me
here is the code
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.geom.*;
import java.applet.*;
import java.net.URL;
public class RaceGame extends JComponent
static int x=560;
static int y=410;
static int currentAngle=0;
static double hspeed,vspeed;
static int carspeed=1;
Image car;
//int angle=car.getAngle();
Image getImage(String filename)
URL url = getClass().getResource(filename);
ImageIcon icon = new ImageIcon(url);
return icon.getImage();
//Rectangle2D.Float rect=new Rectangle2D.Float(x,y,30,30);
//Rectangle rect=new Rectangle(x,y,30,30);
public RaceGame()
car=getImage("car1.jpeg");
public void CreateBase()
JFrame frame=new JFrame("Dare2Race");
frame.setBounds(70,30,650,500);
frame.setVisible(true);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container c=frame.getContentPane();
c.add(new RaceGame());
frame.addKeyListener(new adapter());
c.setBackground(Color.BLACK);
//JLabel finish=new JLabel("FINISH");
//c.add(finish);
public void rotate()
currentAngle+=1;
if(currentAngle>=360)
currentAngle=0;
repaint();
public void paint(Graphics g)
super.paint(g);
Graphics2D g2d=(Graphics2D)g;
AffineTransform origXform=g2d.getTransform();
AffineTransform newXform=(AffineTransform)(origXform.clone());
newXform.rotate(Math.toRadians(currentAngle),x,y);
g2d.setTransform(newXform);
g2d.drawImage(car,x,y,this);
g2d.setTransform(origXform);
g.setColor(Color.WHITE);
g.drawLine(640,380,420,380);
g.drawLine(640,460,320,460);
g.drawLine(420,380,420,300);
g.drawLine(320,460,320,380);
g.drawLine(420,300,125,300);
g.drawLine(320,380,230,380);
g.drawLine(230,380,230,460);
g.drawLine(230,460,2,460);
g.drawLine(125,300,125,370);
g.drawLine(125,370,105,370);
g.drawLine(2,460,2,180);
g.drawLine(105,370,105,300);
g.drawLine(2,180,450,180);
g.drawLine(105,300,105,250);
g.drawLine(105,250,550,250);
g.drawLine(550,250,550,20);
g.drawLine(550,20,275,20);
g.drawLine(450,180,450,100);
g.drawLine(450,100,360,100);
g.drawLine(360,100,360,160);
g.drawLine(360,160,10,160);
g.drawLine(10,160,10,30);
g.drawLine(275,20,275,90);
g.drawLine(275,90,110,90);
g.drawLine(110,90,110,30);
repaint();
class adapter extends KeyAdapter
public void keyPressed(KeyEvent e)
switch(e.getKeyCode())
    case KeyEvent.VK_LEFT:
    currentAngle--;
    repaint();
    break;
    case KeyEvent.VK_RIGHT:
    currentAngle++;
    repaint();
    break;
    case KeyEvent.VK_UP:
    carspeed++;
    hspeed=((double)carspeed)*Math.cos(currentAngle);
    vspeed=((double)carspeed)*Math.sin(currentAngle);
    x = x - (int) hspeed;
    y = y - (int) vspeed;
    repaint();
    break;
    case KeyEvent.VK_DOWN:
    carspeed--;
    hspeed=((double)carspeed)*Math.cos(currentAngle);
    vspeed=((double)carspeed)*Math.sin(currentAngle);
    x = x + (int)hspeed;
    y = y + (int)vspeed;
    repaint();
    break;
public static void main(String[]args)
RaceGame race=new RaceGame();
race.CreateBase();
//race.setDoubleBuffered(true);
}and there is no compile time error in this code
the only error that occurs when u write java RaceGame is because of the car image which compiler doesnt found and throughs exception if u place any image in ur bin folder adn name it car.jpg it wont generate error

Move automation data at same time in differenct tracks?

Similar Messages

Maybe you are looking for