Move subscription jobs from SQLServer Box to Report Server.

environment info:
All SQL Server 2008 r2 on Windows server 2008 r2.
Reporting Services (SSRS instance) name: SSRSServerR
There is no SQL Server installed on the reporting server.
Production SQL Server instance Name: SQLServerP
Now the person who installed the SQLServerP under a mistake installed the whole suite and installed the reporting services too on this machine.
Scenario:
Since the production sql server instance (SQLServerP) has the reporting services installed too
AND
The report server (SSRSServerR) doesnot have the SQLServer installed on it, this has resulted the subscription jobs on the production server.
I want to migrate these subscription Jobs from SQLServerP to SSRSServerR
I belive the following should be the steps:
1. Install the SQL Server on the reporting server so that it may host the report server and report server tempDB databases.
2. Restore the reportserver database on the reporting server. This will automatically put all of the subscriptions on the Report server.
3. Schedule the reports again so that the jobs will be created again.
Now the questions:
1.    Is the above thought correct.  Please let me know if you want to add anything.
2.     Since the new SQL Server installed on the report server will host the reportserver and reportserver tempdb databases, what edition of sql server is required. Will standard edition be enough.
3.    To move the reporting subscription jobs, can I just script those from the SQLServerP and restore them on the newly installed sql instance on SSRSServerR.

Hi Aanya,
Your approach overall seem to be ok, a couple of things:
 - Once you restore the ReportServer database on the SSRS server, you don't need to schedule the reports as the schedules will be restored
as well.
- As part of the restore, all the SQL Agent jobs(related to subscriptions) will be copied over as well.
- Once you finish restoring the ReportServer database on the SSRS server, you'll need to do some basic configuration as explain in the below
MSDN article.
I suggest you to go though this article -
Moving the Report Server Databases to Another Computer
Hope this helps.
Shahfaisal Muhammed http://shahfaisalmuhammed.blogspot.com

Similar Messages

  • How to move BCS data from one box to other

    Hello Expert,
    Dose any one know how to move BCS data from one box to other box ?
    Thanks & Regards,

    1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
    2)  As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
    Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

  • I have an iMac running Yosemite 10.10.1 & Outlook 2011 for Mac.  For a while, sent emails went to a sent folder on the iMac so I have a collection of sent emails there.  How can I move them to a sent box on my server so I can see them on other devices?

    I have an iMac 3.2 GHz Intel Core i5 with 16 GB memory and 1.12 TB storage running Yosemite 10.10.1 & Outlook 2011 for Mac.  For a while, sent emails went to a sent folder on the iMac so I have a collection of sent emails there.  I have attempted to move those sent emails from the iMac to my email server (IMAP), but without success.  Is there a way to move them to a sent box on my server so I can see them on other devices?  Many thanks for any help you can provide.

    Go to: Apple > System Preferences > Universal Access and in the Seeing tab make sure that the Display Enhance contrast: is set to Normal.
    Alternatly, try holding the  ⌃⌥⌘ (control command alt) keys and then pressing the , (comma) key a few times.

  • How to move CRM_UI_FRAME component from one box to another box

    Hi All,
    Need help about this task.
    Background:
    - CRM Dev Box
    - CRM QC Box
    - CRM Prod Box
    Problem:
    - CRM_UI_FRAME component on the QC Box is not working properly. When we are going to the BSP Workbench, an error comes out that there is an unclosed tag; '>' or '/>' expected entity: "<<document>>" Offset : 0000003376 Error Severity: error.
    - BSPWD_BASICS/WorkAreaHostViewSet is not loaded
    - This problem never occurs on both Dev and Prod Box
    Our Solution:
    - To copy the whole CRM_UI_FRAME component from Dev to QC
    Our Question
    - Is the solution possible?
    - If it is, how could we transfer/copy the whole CRM_UI_FRAME or any component from one box to another box
    - Could we just attach this to a transport? Or is this a BASIS task?
    - Other suggestions on how to do this?
    Thanks in advance!
    Regards,
    Marc

    Hi,
    Please ensure to read note #[1540435 |http://service.sap.com/sap/support/notes/1540435]and to decide which update strategy/scenario you
    need and in the "[SLD Planning Guide|http://www.sdn.sap.com/irj/sdn/nw-sld?rid=/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]".
    You should ensure that your CIM Model and CR Content on your SLD are updated as
    per SAP note [669669 |http://service.sap.com/sap/support/notes/669669]on both SLDs.
    Regards,
    Aidan

  • Error in creating PDF's from 11g Fusion ware report server :: REP-0178

    Hello Friends,
    I am trying to create pdf files from the report server command line, It works fine when I run the command from ORACLE User but when I run it from any other user I get error
    REP-0178: Reports Server rep_001 cannot establish connection.
    Command line that I am using is :-
    /abc/home/rwclient.sh server=rep_001 report=/abc/home/auto.rdf destype=file desname=/abc/home/report001 desformat=pdf userid=${ID}
    I am using a personal copy of reports.sh in /abc/home/
    It is also working fine when I run it from the browser report server link, the only issue is it didn't work through command line for any user other than Oracle.
    OS : Linux x86_64
    Reprots : Fussion ware 11g
    Kind regards,
    Aashish Sharma

    Small update again,
    I skipped using the downloadable oc4j/j2ee and tried using the one that came with 10.2.0.1 installation (patched to 10.2.0.3)
    It starts up fine saying:
    07/03/28 21:31:27 Oracle Application Server Containers for J2EE 10g (9.0.4.1.0) initialized
    It started up all well with the downloadable latest containers too, but got different errors running the apex_fop.jsp file.
    well with the version that came with the database it says in the PDF file after I tried to generate it from a report:
    Error 500:
    java.lang.UnsupportedClassVersionError: Bad version number in .class file
    Anyone got any idea?

  • Run Reports from WebSite via the Report Server

    How do I run reports stored on the Reports Server via hyperlink
    from a WebPage ?? Pls. help!

    You can achieve by two way
    One :
    srw.set_hyperlink('http://servername/dev60cgi/rwcgi60.exe?
    run+report=reportname+userid=scott/tiger@hostname+destype=cache+d
    esformat=htmlcss+server=report_server_name+parameter 1
    = '||:deptno);
    you will have to make dev60cgi as virtual directory
    two :
    web.show_document('cgi-bin/rwcgi60.exe?
    run+report=run+report=reportname+userid=scott/tiger@hostname+dest
    ype=cache+desformat=htmlcss+server='||report_server_name'
    ||'+parameter=yes');
    you will have to make cgi-bin (your oracle2home ) as virtual
    directory

  • Custom Paper Size : Migrating from 6i to 10g report server engine

    Hi,
    pardon my bad english !!
    I'm studying to migrate form/reports 6i to 10G. In report 6i we have reports with custom paper size ("A5" format that is half of "A4", 15x21cm).
    In report server 6i environment (Win2000 server) we have done this configuration.
    - We configure printer; one input tray has "custom" format.
    - We create an OS user (es. CustRep);this user has a "default printer" that has input tray with "custom" format as default tray.
    - We create a new report server (es. CustRepSrv); this report server start as service with CustRep user credentials.
    - Every report (PDF format) generated and printed (destype=printer,desname="My Printer") with CustRepSrv report server get custom format as paper size and so fit with Custom tray definition on the printer.
    Can I do the same in report server 10G environment ??
    Thanks
    Andrea

    Using these and not hearing much bad
    Init Engine 1
    Max Engine 6
    Min Engine 0
    Eng Life 10
    MaxIdle 30
    Trace Error
    Trace Replace
    I set my Report Server Parameters
    CACHE SIZE - 700
    CACHE DIRECTORY = (you have to decide)
    IDLE timeout 120
    Max Connections 120
    Max Queue Size 4000
    trace options = trace_err
    trace mode trace_replace

  • Migrating from 9IAS to 9IASR2 : report server troubleshooting

    Hello
    9IAS application server and report server were installed (OS : windows NT4).
    We installed 9IASR2 instead of 9IAS (also installed following patches : 299.5671 infrastructure patch, 270.3110 Core patch, 251.7300 BD patch). Then, we have problem with web applications which launch reports (with acrobate 5.0) : the reports are correct, except accentued caracters or monay symbols which are no more correctly displayed.
    We already tried to change NLS_LANG in base register (FRENCH_FRANCE.WE8MSWIN1252 -> WE8I808859P15), but it doesn't seem to have an impact.
    I greatly thank any help

    Hi Florian
    The installer should have automatically updated the correct NLS_LANG variables. For French, it should be set to FRENCH_FRANCE.WE8ISO8859P1
    You can also set DEVELOPER_NLS_LANG (for Reports Builder) and USER_NLS_LANG (for Reports runtime) to the same value.
    For more information, you can read the online docs for NLS. See http://download-west.oracle.com/docs/cd/A97329_01/bi.902/a92102/pbr_nls.htm#1005629.
    If this is still occurring let me know and I can liase with the iAS team.
    cheers
    Jan

  • Transfering data from sand box to development server

    Hi, we created some production orders using co01 t-code in sand box. we would like to copy / move those orders in development server. is it possible? if yes pls guide me. thanking you in advance.

    Yadav,
    Please tell us why do you want to move the production order from sandbox to development?? The number ranges and other stuff would be completely different in both the environments and hence it would be difficult to copy ONLY the production order. Also production order is a transactional data.
    The other option would be to apply the transport that you created in sand box to development box..this way the config will be there and now you can create all the required master data in development box and then create the production order.
    Try and revert back.
    Regards,
    Swapnil

  • Migrating from RAS9 to Crystal Reports Server XI R2

    We are currently in the process of migrating to CRS XI R2 from RAS9 and have come across an error thrown by some reports that we have been unable to find an answer to. We receive this error...
    <blockquote>ErrorLog 2008 10  8  8:53:31.284 3092 5816 (\servers\ras\dtsagent\cdtsagent.cpp:3191): CDTSagent::doOneRequest reqId=103: CSResultException thrown.   ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:5383 ErrorCode:753 ErrorMsg:"Error in File C:\WINDOWS\TEMP\INInventorySummaryReportNew {81403A5C-B335-45F5-9480-F1E55CA7A23C}.rpt:
    Failed to logon to the Crystal Report Object Repository." DetailedErrorMsg:""</blockquote>
    ...in our RAS log. We've looked through our reports and while removing an image in some may no longer prompt the error, in others that is not the case.
    Another question I had was: what is the proper way of calling a report from RAS in XI R2? How does the addition of the Entprise featureset/CMS change things from version 9?
    Thanks!
    Jeff

    My apologies -- this was meant to be entered in the Java Development forum.

  • Java application to call BOXI cluster report server

    Dear all,
    We have a BOXI 3.1 cluster consisting of 2 servers, says server1 and server2.
    Which server should the java application call to? server1 or server2? I don't realize there is BOXI cluster common hostname that can be resolved by DNS.
    If the application calls to server1, what if server1 is down?
    Many thanks

    For the Java version of the BusinessObjects Enterprise SDK starting with XI 3.x, CMS members and their "Name Server Port" are persisted by the SDK in the file %HOME%\.businessobjects\clusterinfo.1200.properties file.    This file is read when SessionMgr is instantiated.
    When logon method with a CMS member name/port is invoked, it's looked up to determine what cluster the member belongs to, as recorded in the properties file.  Then a random CMS member from that cluster is selected, and connection is attempted to that CMS Name Server.
    So regardless of what CMS name you enter for the logon, it should at least fail over to a live one.
    The only issue happens if there's no clusterinfo.1200.properties file (i.e., fresh install on the SDK machine) or not accessible (if the process has no rights to access that file).  Then you have to ensure the CMS name you enter is to a live one.    If it's a fresh install and there's sufficient file access, the initial contact with a live CMS Name Service will retrieve all CMS members, and the SDK will update teh properties file.
    So you shouldn't have to worry about which CMS name you specify.
    Sincerely,
    Ted Ueda

  • Change job owner for job owned by a report server process

    Question on a SQL 2008 Enterprise Edition (64-bit)
    I have changed the owner of a couple of jobs (owned by a report server process) using Management Studio. The new user has sysadmin role just like the previous one had.
    Then I kept thinking on the job's legend: "This job is owned by a report server process. Modifying this job could result in database incompatibilities. Use Report Manager or Management Studio to update this job."    
    Did I do it at the right place or I had to do it at the Report Manager?
    I went to report manager and I was not able to find where I could change this.
    So, Did I do it at the right place by doing it at Management Studio?
    Thanks!
    Paulino

    Hi Paulino PP,
    According to your description, you want to know some information about changing owner of jobs in SQL Agent. Right?
    In this scenario, you did the right thing. We should edit it in SQL Server Manager Studio. Since the new owner has same permission and authority, so the job will be also executed. For some detail information, please refer to the link below:
    http://msdn.microsoft.com/en-us/library/ms178031.aspx
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Migrate jobs from one OEM instance to another

    Hi,
    We have an OEM 11g dev server, where we are testing and creating many job definitions.
    We also have an OEM 10g prod server, that we will soon upgrade to 11g.
    Is there a way or a tool to migrate all jobs from the OEM 11g dev server to the OEM 11g prod server?
    thanks

    It might be benefiicial to list more detail. What versions of OEM, assuming 10.2.0.5? What version of DB, in our case it was 10.1.0.4.0.
    Our path was to export 10.1.0.4 into 11.1.0.7.0, then upgrade to 11.2.0.3.0 which all of our DB's are.
    However, from Collaborate and from forums/communities, the consensus was it was better to install OEM 12c from scratch and skip 11g all-together.
    So that's where we are. Installed OEM 12c on another server (we wanted to decommision our 10g server anyway).
    Running OEM 10g/12c Parallel (Agents on different ports). Configuring as we go. OEM 12c I will say, at least IMHO (In My Humble Opinion) is a a complete difference from OEM 10g (rule-wise). Not that there are no similarities, just how you get there is a lot different.
    Anyway hope this helps!

  • Load Balancing Reports Server

    I am supporting an app server for a Forms & Reports application that uses run_report_object to run reports on a Reports Server. This is on 10gR2 (10.1.2.0.2) on Solaris & Linux.
    Currently running multiple standalone Reports Servers on a single server (for 3 different projects). Need to prevent one project from affecting another as much as possible (yes, I know they are on the same box....).
    I have a requirement to ensure that a hanging Reports Server doesn't prevent other jobs from running. I see that Reports Server clustering is no longer an option. The Reports documentation about how to implement HA basically say just read the AS docs and figure it out. The problem is that using the AS J2EE HA means that you'd HAVE to use the Reports Servlet. Additionally, I don't see how the reports servlet could be called so that more than one Reports server would be used.
    I keep hearing about an impending doc about implementing HA on Reports. When is it coming?
    Future environments will be multiple AS installs on separate boxes accessing a RAC DB.
    So, what's the scoop? How can I implement this?
    So, here are my questions:
    1. (Two Servers) I believe I could do this on two servers if I had the same Reports Server name on each. If so, could I have two OC4J containers on each server both with the same mount point for the rwservlet application? What else would I need to do to tell OHS to load balance between both since they have the same name.
    2. (Two Servers) If 1 above is okay, would it be possible to have two OC4J containers point to two different standalone Reports Servers?
    3. (One Server) Can I start up multiple Reports Servers on same box with the same name (I'm pretty sure this is no :-) )
    4. (One Server) Like 2 above except on a single server. Two independent OC4J containers accessing two different servlets. Each has a default Reports Server setup. URL would look the same from each.
    I'm kind of graping for straws here on how to move ahead. I'm surprised the Reports Server clustering was taken away, but I suspect it is because the underlying Visibroker architecture was changed and there weren't the resources required to redo this. I'm not sure that is a good thing.
    Any help would be appreciated.
    :-) Steve

    Say you have two servers where you configured Reports, i.e. either in full Enterprise Edition or in AS10g Forms&Reports standalone.
    For example:
    ServerA.oracle.com with port 7777
    ServerB.oracle.com with port 7777
    Without using a load balancer you would call a Report with:
    http://ServerA.oracle.com:7777/reports/rwservlet?report=test.rdf&userid=scott/tiger@orcl&destype=cache&desformat=htmlcss
    http://ServerB.oracle.com:7777/reports/rwservlet?report=test.rdf&userid=scott/tiger@orcl&destype=cache&desformat=htmlcss
    Now you put a load balancer in front of them and assign it the virtual name:
    reports.oracle.comNow you can call Reports with this URL:
    http://reports.oracle.com:7777/reports/rwservlet?report=test.rdf&userid=scott/tiger@orcl&destype=cache&desformat=htmlcss
    To make it more interesting you create a specific Reports Server on ServerA called repserver_a and on ServerB: repserver_b. You add them into Enterprise Manager with:
    $OH/bin/addNewServerTarget.sh repserver_a (on ServerA and with repserver_b on ServerB). You might need to reload opmnctl and emctl with:
    opmnctl reload
    emctl reloadIn $OH/reports/conf you add this line at the end (use server=repserver_b on ServerB) :
    reporting: userid=scott/tiger@orcl destype=cache desformat=htmlcss server=repserver_a %* You'll call your Reports with this URL:
    http://reports.oracle.com:7777/reports/rwservlet?reporting&report=test.rdf
    Good luck!
    Martin

  • Report server engine (9.0.2.0.3)

    Hi all,
    I would like to know whether the Report server Engine is multitasking or not. I installed Oracle application server 9.0.2.03 on a NT2000 environment, and I have two server engine running. If I have 4 or more user requests and if the first report takes long time to retrieve the data from the database, does the server engine attends to another request or does the engine waits for the first report to get over before attending the second request.
    Frequently I am getting the following message, while running report with 2 sessions. (even though my report should not take more than 1 min)
    Running the report Formatting page 1. Please wait.(report format is PDF)
    And to come out of this situation, I need to restart the report server.
    If i try to cancel the job, I get a message
    'Cannot kill job with Job ID REP-59068:Bad Engine name:null'
    Thanks and regards.
    [email protected]

    hello,
    an engine can only process one job at any given time. out of the box the reports server is configured to run one reports engine and one URL engine.
    if you want to increase the number of report engines, modify the minEngines and maxEngines parameter in the server configuration file.
    a rule-of-thumb is you can have 4x the number of CPUs in your machine. of course you can have less or more than that. but you might run into disadvantages where more engines will actually use up too much resources and result in less performance.
    regards,
    philipp

Maybe you are looking for