Move Users from OCS 2007 R2 to New Lync 2013

I am trying to move users from OCS to Lync 2013 from within the Lync 2013 Control Panel and am getting an error that states "Cannot find Registrar pool. Verify that "FQDN of old pool" is a valid registrar pool.

Give this Lync powershell command a go:
Move-CsLegacyUser <user> -Target <Lync2013 Pool Name>
Move-CsLegacyUser -Identity "Pilar Ackerman" -Target "atl-cs-001.litwareinc.com"
Have you reviewed the OCS to 2013 migration documents?
http://technet.microsoft.com/en-us/library/jj205375.aspx
Did you add the OCS pool to the 2013 topology?
Have you visited Lync News lately? All of the latest Lync news, articles, and tips collected in one giant aggregator. http://lyncne.ws

Similar Messages

  • Client Version Policy: Upgrading from OCS R2 Phone Edition to Lync 2013

    Hey, everyone!
    Looking at the settings in Lync Control Panel, the default OCPhone Client Version Policy is set to block anything older than 3.5.6907.*.
    Now, I have two older Polycom CX700's that are running. In order for them to receive updates from Lync Server, do I need to temporarily remove that policy? I know I need to upgrade them to 3.5.6907.* first, so I guess my question is this: is the Client Version
    Policy, just for signing in or does it also pertain to which devices are allowed to get update information?
    Thanks so much.
    -Eric

    The client policy should only prevent your phones from signing in. Your phones should update fine being blocked.
    I've updated CX700's out of the box (with ancient OCS 2007R2 firmware on them) using Lync 2013 and have not had to modify the Client Version policy.
    Edit: I will add that I needed to install a specific couple interim versions of the firmware before I could upgrade to the latest (OCS 2007 R2 Phone Edition 3.5.6907.222 and then Lync 2010 Phone Edition Feb 2012 4.0.7577.4066) - I blogged about it here: http://www.lynced.com.au/2013/08/getting-that-out-of-box-cx700-from-ocs.html
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
    www.lynced.com.au | Twitter
    @imlynced

  • OCS 2007 R2 migration to Lync 2013

    Anyone has a good migration guide for this project?
    Thank you. Eric.

    There's the TechNet guide:
    http://technet.microsoft.com/en-us/library/jj205375.aspx :)
    Oğuzhan ilkan Boran has a YouTube video as well, he often walks through the TechNet articles with a  bit of a value-add which can be helpful. 
    https://www.youtube.com/watch?v=QoxZ-MDoZaA
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • Upgrade from OCS 2007 to OCS 2007 R2 and Lync 2013

    Hy friends!
    Help me, please!
    Scenario: Migration from OCS 2007 RTM to OCS 2007 R2
    Target: Keep user contact list (I'm talking about only OCS contact list from internal organization users, I'm not refer about external addresses)
    Question: I want to know if when I move a user from OCS 2007 RTM to OCS 2007 R2 the user contact list is also migrated?
    If Yes, can you share the Microsoft documentation that describe it?
    So, after I migrate the users to OCS 2007 R2, finally I can do a supported migration to Lync Server 2013. 
    Thanks in advance.

    If you do a side-by-side migration the contact lists (and other user data) should remain intact. If you tear down OCS2007 and then install OCS2007R2, then you will need to use dbimpexp.exe to export the contact list from OCS2007.
    Here is an overview: http://blogs.technet.com/b/ucedsg/archive/2009/02/07/how-do-i-get-from-ocs-rtm-r1-to-ocs-r2.aspx
    Also take a look at the deployment guide: https://www.microsoft.com/en-us/download/details.aspx?id=19984 specifically
    the section called "Updating from Office Communications Server 2007" which lists some potential issues.
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | MVP (Skype for Business)
    Blog skype4bexpert.com | Twitter
    @georgathomas
    Lync/Skype for Business Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Migrating Users from Exchange 2007 to Exchange 2013 Without redirection through exchange 2013.

    We have all our users and mailboxes on Exchange 2007 and I have introduced two Exchange 2013 servers in my organization and both have mailbox and CAS server installed on them. 
    With Exchange 2007 server, I had not modified any of the internal and external url/uri and had stayed with the defaults.
    For migration most of the documents are suggesting of changing the default internal URL and Auto Discover Service internal URI values.
    In my case, I want to migrate all the users and mailbox (everything that is on Exchange 2007) form 2007 to 2013 and decommission exchange 2007 completely from our organization.
    I am in the phase of transferring users from Exchange 2007 to Exchange 2013 and do not want to change any settings on the existing 2007 servers.
    I have created new dns entry mailx.abc.com with two IPs of both exchange 2013 and changed the Outlook Anywhere internal URL on both Exchange 2013 server to mailx.abc.com.
    So by doing these, I think all existing clients will still connect to exchange 2007 and after moving their mailbox they will be connect to exchange 2013.
    In short I am not redirecting or using 2013 as proxy for 2007 clients and clients whose mailbox is on exchange 2013 will directly connect to 2013 server.
    Questions are, Is this the right way to migrate all the users to Exchange 2013?
    Will it affect the operation of existing Exchange 2007 server?

    Read the below blog on Client Connectivity in Exchange co-existence. There can't be better blog than this on this topic.
    http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
    Clients connect to Exchange from Internal-Outlook, External-Outlook, Web & Active Sync.
    For Internal the configuration that you have mentioned should work as clients would get Autodiscover information from Active Directory (SCP) and get connected to right server.
    However, for external connectivity it makes sense to use External URL on Exchange 2013 servers (keep the Exchange exposed to Internet), configure legacy URL for exchange 2007 and use Exchange 2013 external URL for mailboxes that are Exchange 2007 and Exchange
    2013 for standardization.
    Refer article for configuring URLs -
    http://silbers.net/blog/2014/01/22/exchange-20072013-coexistence-urls/
    - Sarvesh Goel - Enterprise Messaging Administrator

  • Lync 2013- 4 FE servers-F5 HLB- migrating users from OCS-WMI error

    There are 4 Lync 2013 EE FE's with an F5 HLB.  3 of the FEs are Windows 2012 R2 and one is Windows 2008 (this will be decommissioned).
    Access the Lyncadmin/cscp web page works to migrate users from OCS to Lync most of the time.  We noticed at times the following error message:
    Move-CSLegacyUser: verify that WMI Provider is installed by running OCSWMIBC.MSI. For details, see the inner exception.
    So for troubleshooting we would use the <FEname>/cscp to test each server.  The 2008 and one of the 2012 servers worked fine.  The other 2 2012 servers failed with that same error message.
    I looked at lots of articles and made sure that all of the servers had the HKLM\System\CurrentControlSet\LSA\DisableLoopbackCheck set to 1 as well as putting the Poolname FQDN and LB VIP IP address in the HKLM\System\CurrentControlSet\LSA\MSV1_0 registry
    keys.  Just the pool FQDN alone was tried as well.  All the servers were rebooted one at a time as well after these changes.  The Pool FQDN is a DNS entry with the VIP address.
    The same user account is being used when logging into the CSCP.  Trying the CSCP from any server or client machine and using the <FEname>/cscp fails for the 2 servers.
    I have checked the authentication methods in IIS for CSCP internal and have negotiatekerberos then NTLM listed under Windows authentication\challenge.
    I am running out of resources and ideas.
    Anyone?

    Have you confirmed that ocswmibc.msi is installed on all the 2013 Front Ends?
    "First install the Windows Management Instrumentation (WMI) Backward Compatibility interfaces package; this application is installed
    by running OCSWMIBC.msi. (OCSWMIBC.msi can be found on the installation DVD in the Setup folder.)" - http://technet.microsoft.com/en-us/library/gg413025.aspx
    Please mark posts as answers/helpful if it answers your question.
    Blog
    Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

  • Home computer crashed.  How can I move stuff from iPod Touch to a new computer?

    Our home computer crashed.  How can I move stuff from iPod touch to a new computer?

    - Transfer iTunes purchased by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other stuff via the third-party programs discusses in this prevous discussion:
    Best iPod to PC

  • Can i move songs from my iPod to my new matchbook air?

    I bought a brand new mackbook air and i had trouble on the migration assisstant because the verification window wouldnt show up on my old dell. I would now like to know if i am able to move songs from my ipod to my new mac without having to use migration assisstant. Please help me! Thanks!

    one way to can simply do this (if dragging and dropping won't work), is to simply put the songs that you would like in the playlist into the On-The-Go playlist in your iPod. Once you have put these songs into the On-The-Go folder (by highlighting the song and holding down the center button), simply plug the ipod back into your computer, and rename the folder with the songs in it. Hope this helps.

  • Can i move everything from my iphone to a new computer without losing my messages (iphone 3gs)

    Hi,
    Em i am wondering if there is any possible way to move everything from my phone to a new computer because i lost my old computer and dont want to lose everything. If not is there even any way i can just keep my messages. If i have 2 lose my music thats that but i really dont want to lose my messages. I cant lose them really :/... If anyone no's what i can do it would be really really helpful... thank you ..

    https://discussions.apple.com/docs/DOC-3141

  • I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

    I am talking about the Ver 3 download link that came with the purchase email.
    That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
    Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
    If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
    /Applications/Aperture.app
    /Library/Application Support/Aperture/
    ~/Library/Application Support/Aperture/
    Leonie

  • Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

    When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

    I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
    For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
    Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
    A better place to ask this question would be on the MS Office for Mac forums.
    Hope it all works out for you.

  • Hi, I need help!. I will change my iphone and I need to move contacts from one iPhone to the new, what should I do?

    Hi, I need help!. I will change my iphone and I need to move contacts from one iPhone to the new, what should I do?

    You should have been syncing your contact with your computer all along.  Just sync them from the computer to the new iphone.
    iPhone: Transferring information from your current iPhone to a new iPhone

  • How to move everything from my 3GS to my new 4s

    how to move everything from my 3GS to my new 4s without losing anything (all apps messages notes etc. also on Macbook Pro)
    the carrier provided a new smaller SIM card.

    Connect to iTunes and backup your 3GS.  Connect your 4S and and go through the initialization process.  When it asks you to setup your phone as new or restore from a backup, select "restore from backup".  Select the most current backup you just made of your 3GS.  You should be good to go after that.

  • Bulk move users from one group to another in XI 3.1

    Hi all,
    I have a group that contains approximately 20,000 users. I now need to move around 7,500 of these users into a different group.
    How can I do this programatically in bulk as I don't want to go through and manually change the groups of 7,500 users?
    Thanks,
    Chris

    Hi Christian,
    Assuming you would need to move users from one group to another and remove them from the previous group, you could use the attached java code.
    To run the code, you would need to save it as .jsp file and paste it inside AdminTools application context.
    The pre-requisite to run this code is to create a Text file with all the 7500 user names in it. The text file should contain one user per line
    (example:
    User1
    User2
    User3
    You can get this information from query builder by running the below query
    Select top 20000 si_name from ci_systemobjects where si_kind='user'
    Initially do it for 2-3 users to text the results.
    You would need to edit the jsp and modify these three lines
    1.
                    * Assign user to a group
                   //Query for the group ID
                   boQuery = "Select SI_ID From CI_SYSTEMOBJECTS Where SI_KIND='UserGroup' And SI_Name='UserGroup name'";
    Above in SI_NAME, you would need to provide the usergroup name you want your users to be added to.
    2.
    if (boUserInfoObject.getGroups().remove(Group Id from which it has to be removed)) {
                            out.print("User removed from group successfully. ");
    Above you would need to provide the id of the group you want the users to be removed from(i.e the current group from where you want them to be moved).
    3.
    * Path to file containing User names.
    final String USER_FILE_PATH = "<Path of txt file from which list of users will be imported>";
    Above you need to specify the path of the text file which contains all the user names.
    Incase you require further assistance on SDKs, raise your concerns in the below space
    http://scn.sap.com/community/bi-platform/java-sdk
    Thanks,
    Prithvi

  • HT201250 How long does it take to move 700gb from time machine to a new iMac?

    How long does it take to move 700gb from time machine to a new iMac?

    Last time I did this it took approx 2 and a half hours for 220 GB...
    That was using an External USB 2 Time Machine Hard Drive.

Maybe you are looking for