MOVED: 990FXA-GD80 oc problem

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=151483.0

Quote from: Jack on 22-August-11, 17:23:46
Give the latest UEFI/BIOS BETA Release a try: https://forum-en.msi.com/index.php?topic=151102.msg1122085#msg1122085
will try, thx
Quote
In case that does not fix your problem, report your issue to MSI Technical Support: http://support.msi.com/
also done....waiting for an answer
i found on nvidia forum several users having the same problem on different boards and using different GFXs
http://forums.nvidia.com/index.php?showtopic=149355
http://forums.nvidia.com/index.php?showtopic=203686
...weird

Similar Messages

990FXA-GD80 Sudden Problems

Motherboard: 990FXA-GD80
BIOS: 11.10 (most recent)
CPU: AMD FX-8120 8-Core
Memory: 2x4GB G.Skill
Graphics: GeForce 8800GT
OS: Windows 7
I get the feeling I'm in for another long stretch of troubleshooting, so posting this with all the current symptoms. Maybe someone has ideas that'll save me some time.
Computer was working mostly fine when I left the house for about 30 minutes. Came back to a black screen, unresponsive mouse/keyboard, and I couldn't even shut the computer down from the front power button.
The only odd thing happening prior to this was my USB headset losing sound, forcing me to disable/enable it to get it working again. Maybe related, maybe not.
Upon restarting the computer, the post screen didn't see my mouse or keyboard, hung for a while trying to load Windows, and went to a "PARITY ERROR" of some sort.
I moved my mouse and keyboard from the USB3.0 ports to USB2.0 and after a reboot or two, I got into Windows, but Aero was disabled, graphics were set to 800x600, and everything was sluggish.
Current symptoms:
- Motherboard showing FF debug code through entire boot sequence
- BIOS unable to get CPU/case heat and #1/#2 fan reads, CoreTemp reads fine
- GeForce 8800GT on IRQ10 but "Windows has stopped this device because it has reported problems. (Code 43)"
- Renesas Electronics USB 3.0 Host Controller: "This device cannot start. (Code 10)"
- Windows 7 loads slow, sluggish performance
Have tried:
- Disabling unnecessary motherboard components (Audio, IEEE 1394, etc.)
- Reinstalling graphics drivers
Heat shouldn't be a factor. My system seems to run really cool. According to CoreTemp my CPU's only at 18 Celsius right now. I've reset the BIOS to no avail.
I'd kind of like to think video card problems could cause all these symptoms since I can justify replacing that, but the on-board problems (Debug LED, BIOS heat/fan reads) are suggesting a motherboard failure. And I bought this motherboard just a month ago after replacing a defective, new 880 series. My luck can't really be this bad, can it? I'm even outside the return window for this motherboard now.

Quote from: badboy2k on 02-June-12, 15:34:24
my computer usually does that too with my graphics setting it to 800x600 usually when my Graphics card has overheated while idle (good sign you need to clean the heatsinc on it or you dont have enougth air flow)!
I'm fairly confident that's not the issue. As mentioned above, my CPU temp would have been around 18C when this happened (sitting on the desktop). I have 3 fans blowing in from the front and top, 2 blowing out the back.
I'm pretty sure the graphics card isn't the source of this issue. I just tried booting with it completely disconnected and I still only get FF on the debug LED. It's like the motherboard has lost the ability to detect its own status. And I imagine whatever is causing that is also interfering with the normal operations of the video card and USB3 controller.
Weird thing is, the graphics card works well enough to be working for me right now, but even nVidia's own software isn't recognizing it.

990FXA-GD80 oc problem

phenom II 1090t
990FXA-GD80
2 x GTX285 Superpipe
windows7 x64
current bios: 7640Vb2 (same problem with bios 7640Vb0)
hi,
another weird problem which wasnt fixed by flashing to the last bios:
all is running fine with bios set on "default settings", sli is detected and the gfx's work with sli actived or disabled
i had no problems to OC my actual cpu on other boards (870A Fuzion & NF980-G65: 4ghz;CPUv:1.428; CPU.NB:2600; CPU.NBv:1.255)
i tryed to oc the [email protected] (greenpower disabled, turbo disabled) 200x18; when windows open my 1920x1080 resolution have gone for 800x600; the nvidia MSI GTX285 are no more detected, the nvidia control panel is gone and it seem that the mobo have switch to the integrated chipset.
the same happen if i try to use the oc genie button
all goes back to normal if i reboot and reset the bios to default settings...without oc
did i miss a new option to desactivate to get the oc working or is it a sort of problem between the nvidia GFXs and OCing the CPU? looks really weird

Quote from: Jack on 22-August-11, 17:23:46
Give the latest UEFI/BIOS BETA Release a try: https://forum-en.msi.com/index.php?topic=151102.msg1122085#msg1122085
will try, thx
Quote
In case that does not fix your problem, report your issue to MSI Technical Support: http://support.msi.com/
also done....waiting for an answer
i found on nvidia forum several users having the same problem on different boards and using different GFXs
http://forums.nvidia.com/index.php?showtopic=149355
http://forums.nvidia.com/index.php?showtopic=203686
...weird

990fxa-gd80 HDD problem

Hey guys.
I have a problem with my drives. I have a A-data ssd and Samsung F3 1TB connected. The problem is, stay with me here, that the system doesn't see the samsung HDD when I go into My computer. BUT BIOS detects both discs. AND Device manager detects both discs. And it reports that it works just fine. I wanted to use the SSD as a system drive and the HDD for everything else.
ANY advice would be VERY welcome.
My system:
MSI 990fxa-gd80
AMD X4-955 BE
MSI R6950 TF3
Kingston 4GB Ram
A-data ssd 60GB
Samsung F3 1TB

Have a read of this FAQ:
https://forum-en.msi.com/faq/article/how-to-add-a-second-hard-drive-for-storage

MOVED: 990fxa-gd80 problem

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=150456.0

Quote from: jo.sh on 15-July-11, 12:53:12
Aha! I did plug in the video card, but it seems I hadn't seated the connection correctly. Everything boots fine now, thanks!
However, I'm having another problem. It seems like the OS (Win 7) isn't recognizing the PCI slot, which is where my wireless card is installed. (At the same time Windows can't find an ethernet controller driver.)
Is this likely a hardware issue, or the OS?
Quote from: jo.sh on 15-July-11, 12:53:12
However, I'm having another problem. It seems like the OS (Win 7) isn't recognizing the PCI slot, which is where my wireless card is installed. (At the same time Windows can't find an ethernet controller driver.)
What card you use? There should be driver included with this WiFi card itself
Quote from: jo.sh on 15-July-11, 12:53:12
Aha! I did plug in the video card, but it seems I hadn't seated the connection correctly. Everything boots fine now, thanks!
No problem

MOVED: 990fxa-gd80 system memory sharing problem

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=157695.0

Have you tried the latest BETA Release:
https://forum-en.msi.com/index.php?topic=151102.msg1158952#msg1158952
7640AMS.B80 ---> E7640AMS.B93
- Fixed sys fan3 speed issue.
- Fixed can't use usb30 devices under DOS.
- Fixed DDR3-1866 compatibility.
- Update to AMD AGESA Orochi 1.2.0.2 and AMI 4.6.4.1_Agesa_Orochi_027.
- Update Orochi-AGESAMSI to 4.6.4.1_Orochi-AGESAMSI_027-1.
- Added ForwardCompatibility module.
- Updated AMD SB800 eChipset from 4.6.3.7_AMD_SB800_034 to 4.6.3.7_AMD_SB800_039.
- Fixed it will show warning message when update bios by afude238 tool.
- Support hotkey(F8/F9) for OCprofile Save/Load.
- Fixed low voltage memory always run 1066MHZ.
- Patch memory test fail.
- Fix plug a PCIEx1 network card to all the PCIEx1 slots on the motherboard and no video occur.

MOVED: 990FXA-GD80 + FX-8150 = NO "Windows XP Mode"

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=155453.0

@robonline
I believe I'm seeing this same issue as well, I've got a windows 7 system that was running with an Athlon II 250 on which Windows XP mode installed and worked perfectly.
However when I upgraded the CPU to an AMD FX-8150 (in an otherwise unchanged system) Windows XP mode no longer starts properly, it seems to hang before the Virtual PC starts to boot the OS (so possibly either during BIOS POST, or right
at the transition.
I've discovered that it doesn't ALWAYS fail, and if power of the Virtual PC and Start it again a few times in quick succession it seems to then get past what ever point causes the problem and then boots the XP Virtual PC and
it works normally until it's next turned off.
So if you need XP mode (as I do for some work applications) the (crazy) work around might be to install XP mode with a none bulldozer CPU (if the try, try, try again method doesn't get the installer to work) you can probably get it to
start once you change back to your bulldozer CPU by simply trying to start the installed OS a few times in short succession.
@Alex
Many thanks for looking into this!
Rob

MOVED: 990FXA-GD80.. new install.. a few suprises.. a few questions..

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=157216.0

Hi Mechafire,
back from work (for which I had to leave this morning...
3. When partitioning the harddisk for BootCamp Windows the space for the Windows partition is taken from the OSX partition, thus decreasing the size of it.
Usually this poses no problem for OSX, but OSX can become erratic when the amount of free space on its partition drops below 10% of the partition size.
That's what I meant with 'problem'
4. Personally I haven't had any problem with installing programs on BootCamp Windows.
However there seems to be some very specific programs (usually protected with hardware-dongles) that do not run perfectly.
In the past AutoCAD was such one, but I'm not sure if this is still so.
5. As said, I don't have a MBP so I don't have first-hand experiences with it.
When you look around the BootCamp Forum you will find some posts which mentions problems with the trackpad in Windows.
7. I use BootCamp as well as Parallels with Windows on my Mac and I can say that I never had any problem with them.
BootCamp is the way to go when you know you don't need OSX at the time, while Parallels (and the VM apps) are quite handy when you are in OSX and just want/need to run a Windows program since you don't have to reboot the Mac.
8. Right now Windows 7 is not supported by BootCamp and also is still in Beta.
At the time of release of Windows 7 there will be most likely a BootCamp update that supports Windows 7.
Nonetheless there are some people round here that are using the Public Beta of Windows 7 on their Macs right now with the Vista Drivers that are on the OSX Leopard DVD.
Personally I would say wait for Windows 7 if you can , otherwise Vista is the next best choice.
Regards
Stefan

MSI 990FXA-GD80 Audio Problems.

Yesterday I was listening to a song on Windows Media Player so all of a sudden an error pops up and says Windows Media Player accoutered a problem while trying to play this problem, I was like ok what ever, then I played a game I was like humm I can't hear anything I went to YouTube same problem and according to my audio volume mixer in W7 it shows that audio is being transmitted so I restarted my HD V-Deck audio drivers, unplugged and plugged my audio card same problem, and today the same thing happened! only this time after starting a fresh boot within 2 hours!!!
Only way to fix this is to restart my pc which gets annoying.

>>Posting Guide<<

MOVED: 990fxa-gd80

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=150971.0

More details about my computer
Component Details Subscore Base score
Processor AMD FX(tm)-8320 Eight-Core Processor 8,0 5,9
Determined by lowest subscore
Memory (RAM) 4,00 GB 8,0
Graphics AMD Radeon R9 200 Series 8,0
Gaming graphics 5862 MB Total available graphics memory 8,0
Primary hard disk 356GB Free (466GB Total) 5,9
Windows 8 Pro
System
Manufacturer MSI
Model MS-7640
Total amount of system memory 4,00 GB RAM
System type 64-bit operating system
Number of processor cores 4
Storage
Total size of hard disk(s) 1863 GB
Disk partition (C:) 356 GB Free (466 GB Total)
Disk partition (D:) 440 GB Free (909 GB Total)
Media drive (E:) CD/DVD
Disk partition (F:) 488 GB Free (488 GB Total)
Graphics
Display adapter type AMD Radeon R9 200 Series
Total available graphics memory 5862 MB
Dedicated graphics memory 4096 MB
Dedicated system memory 0 MB
Shared system memory 1766 MB
Display adapter driver version 14.100.0.0
Primary monitor resolution 1920x1080
DirectX version DirectX 11 or better
Network
Network Adapter Realtek PCIe GBE Family Controller
Network Adapter Qualcomm Atheros AR9287 Wireless Network Adapter
Network Adapter Microsoft Wi-Fi Direct Virtual Adapter

MOVED: 990fxa-gd80 debugg code 26??????

This topic has been moved to MSI AMD boards.
https://forum-en.msi.com/index.php?topic=251596.0

More details about my computer
Component Details Subscore Base score
Processor AMD FX(tm)-8320 Eight-Core Processor 8,0 5,9
Determined by lowest subscore
Memory (RAM) 4,00 GB 8,0
Graphics AMD Radeon R9 200 Series 8,0
Gaming graphics 5862 MB Total available graphics memory 8,0
Primary hard disk 356GB Free (466GB Total) 5,9
Windows 8 Pro
System
Manufacturer MSI
Model MS-7640
Total amount of system memory 4,00 GB RAM
System type 64-bit operating system
Number of processor cores 4
Storage
Total size of hard disk(s) 1863 GB
Disk partition (C:) 356 GB Free (466 GB Total)
Disk partition (D:) 440 GB Free (909 GB Total)
Media drive (E:) CD/DVD
Disk partition (F:) 488 GB Free (488 GB Total)
Graphics
Display adapter type AMD Radeon R9 200 Series
Total available graphics memory 5862 MB
Dedicated graphics memory 4096 MB
Dedicated system memory 0 MB
Shared system memory 1766 MB
Display adapter driver version 14.100.0.0
Primary monitor resolution 1920x1080
DirectX version DirectX 11 or better
Network
Network Adapter Realtek PCIe GBE Family Controller
Network Adapter Qualcomm Atheros AR9287 Wireless Network Adapter
Network Adapter Microsoft Wi-Fi Direct Virtual Adapter

MOVED: 990FXA-GD80 sudden poor performance

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=171196.0

Ok, I dropped back to 4567mhz and it went 1 hour in OCCT LDS without errors. Would like to learn how to get it to 4.6ghz stable.
But most importantly, why is the frame rate in games only half of what it used to be? 50-80 fps is unimpressive when it was 120-180 fps a week ago.

MOVED: 990FXA-GD80 + fx8150 + bios update

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=155369.0

Try the latest BETA Version:
https://forum-en.msi.com/index.php?topic=151102.msg1144558#msg1144558

990FXA-GD80 Bios problem for FX-6300

What Bios should I have? I bought the Sempron 145 only to post and install OS. Mobo does not read FX-6300

Quote from: KHaws777 on 12-August-13, 21:34:57
Alright i will try that....set new ram everything then shutdown and install fx chip?
Update: I cant access advanced DRAM settings...also I tried using one stick since i was running dual channel and that did not work. I'm thinking of getting a new mobo all together and not MSI unfortunately. The flash tool has failed multiple times and im just pretty much lost. HeLp!!! Thanks all!
This is what started this: https://forum-en.msi.com/index.php?topic=170859.0

990fxa-gd80 usb problem ....

hi guys
i have turned on my computer this morning and it doesn't recognize peripherals plugged in rear usb ports anymore
what should i do ?

Quote from: flobelix on 10-August-13, 00:53:40
Try the suggested otherwise your board may be dying.
it is still under warranty i want to know if it is covered ?

MOVED: 990FXA-GD80 oc problem

Similar Messages

Maybe you are looking for