MOVED: RAM issues regarding CPU + Mobo & OC'ing

This topic has been moved to Overclockers & Modding Corner.
RAM issues regarding CPU + Mobo & OC'ing

Quote
Ok...but the problem was increasing the FSB.....and as for increasing the memory, I realise I have to change it back to 200mhz, but Im getting to that part after I overclock the CPU, I guess thats how its suppost to go? According to the guide Im using anyway...I dont understand how you can test one of them at a time, seeing as increasing the FSB increases the RAM frequencing.
You are testing one at a time by lowering the memory to 100. Increasing the "FSB" will result in memory speed less the 200, we know the memory is good up to 200, so... This way you are pushing the CPU to it's limit but the memory is still running far less then what it can. In this example the CPU max speed is found then you bring up the memory like you said above.
Quote
Also, there would be no point in getting PC4000 RAM seeing as the Neo4 platinum only supports up to PC3200, plus I was thinking of getting OCZ 2GB (2x1GB Kit) EL DDR PC-3200 Dual Channel Platinum Kit (CL 2-3-2-5) anyway, looks like its good RAM.
That's just because there isn't an official PC4000 spec. It will run fine and can use it's potential in this board although if we can't get you higher then 225HTT(FSB) then PC4000 is overkill, as you wouldn't quite max out PC3700 right now. I've seen memory running at 350Mhz(700Mhz) in your board. That's like PC5600! Rule number one, don't believe MSI.
I like that OCZ kit you are talking about.

Similar Messages

RAM issues regarding CPU + Mobo & OC'ing

edited from different thread
Hi there,
I've been having problems with my RAM, that is its running at 333mhz/freq = 157 etc.. I'll list my old system as well as my new one which will help explain my confusion....hopefully....
My new system is thus:
-MSI K8N Neo4 Platinum
-BFG 7800GTX
-AMD Athlon 64 3500+ (Newcastle core default settings/2.2ghz)
-2 GB DDR-400 3200 (3 x 512mb chips are Kingmax, 1 x 512mb chip is Generic....I have realised they are different timings using CPU-Z, i.e. Generic has different timings too the Kingmax chips)
-Super flower 500w PSU
-Thermaltake Big Water cooling kit (CPU)
-Western Digital 300GB SATA HDD
-And old Seagate barracuda 40GB HDD
-Windows XP SP2
I have been told by the Moderator "Tiresmoke" to include more information, is it OK to posts links to each product?
My old system is thus:
-MSI K8N Neo2 Platinum
-AMD Athlon 64 3500+ (Newcastle core default settings/2.2ghz)
-GameCube X800XT-PE
-(same RAM as above)
-X-Connect 500w PSU
-Thermaltake Big Water cooling kit (CPU) (same as above)
-Western Digital 300GB SATA HDD (same as above)
-And old Seagate barracuda 40GB HDD (same as above)
-Windows XP SP2 (same as above)
So here is whats happening...
My old system when it first got put together, the RAM ran at 333mhz instead of 400mhz...however, I took my PC out to work so a mate of mine could help me out. Anyway, from memory I think he did a BIOS update, but whatever he did....when the PC booted up...the freq read as 200 and the RAM of course speed up to 400mhz...and I could tell in games like FarCry that there was a big difference. Plus CPU-Z showed me the difference...
But I've been reading everywhere....that 4 x 512mb chips will not allow 400mhz speeds....I noticed all my RAM chips are double sided
Anyway, my question is...how do I now (with my new system) do what my mate did? Is it because he say....enabled manual instead of auto in the DRAM config?......I also tried enabling manual mode with only 1GB of memory in dual channel mode, which did change the freq to 200mhz, giving the memory a speed of 400mhz, but I did not notice a considerable performace gain (using 3DMark05)
I'm also guessing I really need to tighten my memory timings, however I'm very new to that kind of thing, I have read many articles about overclocking (which I realise I have to do due to the 7800GTX), and Im still not comfortable about doing it until I find an article or guide that is specific with overclocking for the motherboard I have, and Im guessing for the CPU and RAM would help also.
Or....did he turn on D.O.T. which I believe overclocks the FSB, in-turn overclocking the RAM freq?
If I'm way off....please tell me so...because I dont have a real idea! But I would like to thank any and all help, although I cant offer you gold and silver, I do appreciate the time you have taken to help me out.
Regarding what Blackngold said in the other thread, I will try changing 1T to 2T to see if that helps, it may already be 2T but I will check, thank you for your input.
Regarding what Jaybee said, if that is true that the Newcastle core cannot support 4 dimms...should I sell all 4x512mb sticks and instead get 2x1GB sticks?
I realise I need to really overclock my CPU to relieve the bottlenecking of the 7800GTX, so I'm asking for anyone who has prior experience with a similiar setup as mine, in general overclocking or knowledge of other overclocking guides to please help me out, I have tried to understand guides from other websites, but I'm still confused. Even if someone here is kind enough to go through step by step with me, I would really appreciate your help.
Thank you for your patience in reading my request, take care.

Quote
Ok...but the problem was increasing the FSB.....and as for increasing the memory, I realise I have to change it back to 200mhz, but Im getting to that part after I overclock the CPU, I guess thats how its suppost to go? According to the guide Im using anyway...I dont understand how you can test one of them at a time, seeing as increasing the FSB increases the RAM frequencing.
You are testing one at a time by lowering the memory to 100. Increasing the "FSB" will result in memory speed less the 200, we know the memory is good up to 200, so... This way you are pushing the CPU to it's limit but the memory is still running far less then what it can. In this example the CPU max speed is found then you bring up the memory like you said above.
Quote
Also, there would be no point in getting PC4000 RAM seeing as the Neo4 platinum only supports up to PC3200, plus I was thinking of getting OCZ 2GB (2x1GB Kit) EL DDR PC-3200 Dual Channel Platinum Kit (CL 2-3-2-5) anyway, looks like its good RAM.
That's just because there isn't an official PC4000 spec. It will run fine and can use it's potential in this board although if we can't get you higher then 225HTT(FSB) then PC4000 is overkill, as you wouldn't quite max out PC3700 right now. I've seen memory running at 350Mhz(700Mhz) in your board. That's like PC5600! Rule number one, don't believe MSI.
I like that OCZ kit you are talking about.

Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB. Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use

Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM
Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB.
Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use all 512MB vRAM?@

Photoshop can only see what your video card driver reports.
You might want to update your video card driver from the GPU maker's website.

MOVED: question regarding CPU temps and latest bios (1.8)

This topic has been moved to AMD64 nVidia Based board.
question regarding CPU temps and latest bios (1.8)

I'd believe the first bios's temps more than the second...
However what temps are given when using speed fan and/or everest? (in windows)

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

X-Fi Xtreme Audio & 4GB RAM issue - latest driver?

:X-Fi Xtreme Audio & >4GB RAM issue - latest driver?T Hi All,
Been using an X-Fi Xtreme Audio with 4GB RAM for ages, no issues.
I purchased and installed a zotac 9600 GT which has GB onboard ram, which works fine, but now my X-Fi has started causing general system instability. (processes using heaps of CPU time whilst apparently doing not much, jerky/slow adobe flash, distorted (slow-motion) audio at random times, etc etc.
In the support section here it says:
Audio issue from output from soundcard with computer having 4GB RAM:
<span class="text">
Keywords: <font>4GB ram, installation, xfi, x-fi
Summary: Customers with computers having <font>4GB or above of RAM and are experiencing audio issues, please download the latest driver for your sound card.
However... When this issue first came up I formatted my primary dri've, reinstalled the OS and downloaded the latest drivers for EVERYTHING. The problem has prevailed..
It was only yesterday that I tracked down this problem in the support section here, and tried to verify that my driver is indeed the latest. But device manager lists the driver as "6.0.0.209" when in the support section here the downloads are named ".xx.xxxx" or something. How can I confirm that I have the latest driver? In any case, I'm almost certain that I have the latest, and this issue is still occuring.
I have read in other forums that on other varients of my X-FI card, the latest drivers have not solved this problem either.. sorry I cant be more accurate than that.
For now, I have solved this problem by simply removing 2GB of ram from my PC. Obviously, I'd like to find a solution and put the other 2GB back in!
Thanks in advance for your help!

Could DanielK please mod this as well, so we can try them. Or Daniel, you could you please tell me how you modified the previous drivers from auzentech as I dont know how these CL drivers work and are modified. What is the inf in these drivers, and if you could tell me the deviceID?s of all the x-fi models, or atleast for x-fi xtreme music as it is my modell. Thx in advance!
EDIT:
I have modified the drivers, was not so hard after all. Im uploading the file now, which should have support for all X-FI cards thanks to Daniel's great job with the earlier version.
Upload finished in 4-5minutes. I will post with link soon to rapidshare!

4 D-lights on all the time, Brand new CPU & MOBO today!!!!!

Hi all newbie here, i have been lurking here for a while, which helped me make my mind up what board to get. I just didnt think i would be posting this soon
I hope somebody here can help me, im well pissed off!!
I have just built my system after buying new CPU & MOBO (see below) today, i goto turn it on and all i get is:
4 D-Bracket lights on permanently and the CPU fan spinning but nothing else.
I have tried removing CPU 5 times now and i have used just 1 stick of ram at a time in DIMM 1 but still nothing.
Has anybody got any clues?
Thanks
Smokey

Quote
i have been lurking here for a while
...always a good idea to research...first...
Quote
+12V 10A
...you're killing me...HAAAAAAAAAAAAAAA!!!

IBook G4 2005 onboard RAM issue

Good day Apple Geeks!
I have 3 iBooks with onboard RAM issue and I'm trying to fix them. I've found that Open Firmware may help but I don't know how to disable onboard RAM.
Source: http://web.archive.org/web/20070112065215/http://www.kernelthread.com/mac/osx/ar ch_boot.html
I've found also that it is possible to disable RAM by disabling 3 pins, but I can't manage where are these pins.
Source: http://forums.macosxhints.com/showthread.php?p=216497
Please help me and save my computers.
Best reagards
Message was edited by: danielzywczak

Hey Daniel,
First it would be helpful to know exactly which iBooks you're talking about.
CPU speed, screen size, OS and RAM installed.
So how do you know the all three have onboard RAM issues? Does system profiler just show the 0 slot as empty?
Richard
Message was edited by: spudnuty

N95 + CoPilot 7 - Possible RAM issue

Hello,
I have had my N95 for a couple of weeks and I must admit I love the phone in every way. However I am noticing a small issue when running CoPilot and was wondering if this sounds like a RAM issue.
Basically when the app is running sometimes it seems to just lockup (usually if rereouting), occasionally the app will close (especially if I get a message through) or even reboot the whole phone.
I have installed Handy Taskman and I have noticed that when it all goes wrong I have about 100k of free RAM which would suggest that the phone is running low on memory (or very close to it).
Now unfortunatly I only seem to have 13Mb available at the best of times but I am also on a T-Mobile handset running v12 (before demmand paging and the RAM boost).
Spoke to T-Mobile about the updates to v20 and v21, they have no release date. Altough I have noticed that the T-Mobile site no longer has the N95+CoPilot option since they have moved to v7, which is puzzling, maybe the lack of the v20 update means that the app does not run that well, although that is just speculation on my part.
Anyway, I really like the N95 but this memory issue is bugging me. I am considering sending the phone back to T-Mobile and buying a SIM free one so I can update it. Tried local Nokia service center and I already have the latest software for my phone (v12).
If I do get a phone with v20 (or v21) how much extra RAM will I get, and more importantly how much free memory? If I say CoPilot needs about 14Mb - 15Mb free to run well am I likely to get this with the latest software from Nokia?
I know there are ways to get the latest updates on my phone but I don't want to risk it, would much rather send this one back and buy one from Nokia.
Any advice would be greatly appreciated.
Lee

Send it back to T-Mobile and buy directly from Nokia.
N-95 8GB, Wish Nokia made a 3G World Phone.
Release a 3G HSPDA 850/900/1800/1900/2100 and Quad Band GSM phone instead!

Need help ASAP: ram issues for neo4 plat

I just bought a new case, motherboard, ram, video card, power supply, and CPU. i took my drives from my old Dell and placed them into this case and the MSI neo4 plat. motherboard (specs in my sig). i just want my comp to work but it doesn't want to. it powers up and does nothing. you just hear fans going. the LED on the D-bracket says that its a ram issue. the ram worked fine last night and i had a video card problem it said. any ideas or am i just completely screwed? i use my computer a lot and need to do some things before i leave for a wedding on the 15th with my family and won't be back til the 25th. i'd like to resolve any issues before i leave so i can relax about it when i get back. i spent all of my money on this and i dont' want it wasted cause i messed it all up and even my parents helped pay for the part i couldn't pay as a birthday present. i'm annoyed, impatient, and probably acting childish over what probably is a stupid petty thing.
thanks,
Zack

Quote from: hansh on 10-February-06, 05:11:12
OK, well the first improvement is there
Sometimes it will help to remove a component and then put it back in the same position, make sure it is fully inserted in the slot. This goes for both the video card and the memory.
1. you can clear cmos (see in your manual)
2. reseat videocard
3. try the other ram module, try different slots
ah you see i did all that already, and it did nothing :P
would you by any chance want to help me on MSN?
this is my second computer assembly. i'm very fluent with comps which is why this is driving my crazy:P
also the heatsink and everything is fine. i'm always the guy that has the weirdest problem thats hard to solve. i should be a professional software tester or something... just don't know how to get there. i'm more of a musician anyway...

Ram issue with X58M board

Hello
I wonder if some one could help me one...... 2-3 years ago i bought a new pc system..... but i still have ram issue!
my PC contains: MSI x58m bios version 3.8 , i7 950 3.07Ghz, Crucial Ram 1333 6GB (1gb x 6) DDR3 240pin , video card ati Club 3d HD4890, Win 7pro SP1 64bit
from day 1 i had problem - unexpected restarts...... my pc store exchanged mother board twice, gpu 2 times and 1 time ram..... nothing helped i only lost 2 weeks! But pc started working fine only after in bios we changed the ram MHz from 1333 to 800mhz! after that system was stable no restarts
could some one plz tell me what is the problem and how to avoid it?
some info from my ram: CT12864BA1339.M8SFD , BL1119M.3V, 200933 SU
regard

Quote from: anat_usa on 10-July-12, 18:00:52
# of Memory Channels - 3
but for some reasons i cant use 1066
that is simple to explain 1066 would work with 3 sticks of ram installed but you have 6 so the max is 800mhz as you have 2x3 channel memory installed and the cpu cant handle that much at full speed!
its all down to the CPU's (Central Processing Unit's) memory controler Quote from: anat_usa on 10-July-12, 18:09:15
i have chievtec 750w, -
my GPU needs only 500 Watt or greater power supply with two 75W 6-pin PCI Express® power connectors recommended (600 Watt and four 6-pin
club-3d.com/index.php/products/reader.en/product/hd4890.214.html
seems like should be ok.....
not the point wattage ratings are meaningless its all down to how that is sub-devided on its rails as ampages i have a 1000W psu here that can't boot a single 24A graphics card as it has 4 x 20A +12v rails and is only usefull as a paper weight!
what are the ampages of its +12V rail or rails? there the important data points to pay attention to! WATTAGE OF A PSU REALLY MEANS NOTTHING ITS ALL ABOUT AMPAGE IT CAN DELIVER ON THE RAILS!!!!!! minimum Wattage psu calculations are done based on a single high ampage +12v rail and if yours has 2-3 +12v rails its no better then a 300W psu at best!
that HD 4890 you have requires this:
18A idle power draw = 216W
28A under load = 336W
that is very power hungery at idle probaly neer the max your psu can put out on a +12v rail!

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.

same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please

Payroll issue regarding the Claims - /561 and /563

Hi Payroll Experts,
I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
The followng are the WT details
IN - Period
OCT 2011
     /101 Total gross amount     118,897.00
     /110 Net payments/deductions     76,070.00-
     /550 Statutory net pay     95343
     /551 Stat.net recalc.diff.     37,692.00-
     /552 Stat.net subs.adjustment      37,692.00-
     /559 Bank transfer                                                   34,317.00
     /560 Net pay     37,218.00
     /563 Claim from previous month     5,609.00
FOR Period
Sept- Oct
     /101 Total gross amount     49,213.00
     /110 Net payments/deductions      31,721.00-
     /550 Statutory net pay     41,529.00
     /551 Stat.net recalc.diff.     14,591.00
     /552 Stat.net subs.adjustment     23,101.00-
     /553 Recalc.diff.to last payr.     37,692.00
     /559 Bank transfer                                                   14,591.00
     /560 Net pay     14,591.00
     /561 Claim     5,609.00
I request some body to throw siome light on the same.

Hi Experts,
Thanks for everyone for replying to my query ,
I have a doubt that If you check the WTs /551 and /552 in the IN PRD, the negative sign is coming for both the WTs
Is it correct?
And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
So how do i handle this issue
IS ther any way to solve this differences?
Please Let me know how to solve this issue.
Thanks

MSI Big Bang-XPower II More MB RAM than the CPU can handle...

I understand reading in a few forum post :" By making more memory available to the system more data can be cached in RAM, so there will be less hard drive activity, and less swapping to memory so your system will perform better." But what happen when motherboard for a desktop that supports( and had install) more RAM than the processor can handle?(aka:processor Max Memory Size).
Please comment in this configuration.as I 'm looking for a MB than offer me the more SATA6 connection i found a few available using LGA2011 socket (MSI Big Bang-XPower II LGA 2011 Intel X79 SATA 6GB/s USB 3.0 XL ATX Intel Motherboard with UEFI BIOS) than support 128GB. As I understand the processor Intel® Core™ i7-3930K Processor only work with 64GB.
Is there any advantage to have a MB that hold a bigger RAM capacity than the CPU? If so, how can this be translate using in a program like Adobe After Effects, RAM preview? thank

More Memory doe's not make it faster as its Volatile Memory (more RAM but it has to be run at much slower speeds) that is very short term and is just a buffer for active Programs and files it Caches there while its active but in no way improves system speed (as it has to be clocked slower to allow the IMC on the CPU to cope with it)! more memory just allows more Active Large programs and files open at the same time and huge amount of ram will only really be of benefit for things like Video Editing, photo editing and 3D rendering as those take alot of ram to allow all the computations that the CPU does to be held for quick access but only when they are active!
having more RAM then your CPU can Handel is a VERY BAD IDEA as it will just refuse to even post or in very rare cases damage the CPU's IMC leading to a dead CPU!
why MSI have done that is for possible later 2011 CPU's that may allow the 128GB of RAM limit to be used but currently they do not exist currently as X79 is a more professional grade Platform that will probably be around for years to come (may be used for many upgrade cycles and may eventually have a cpu that can use 128GB or ram) and who knows what will happen with Intel CPU's in that time frame! (more of a possible forward compatibility thing as its a very high end platform)
as for after effects it uses RAM for holding Render Files so in theory more ram will just allow it to render Larger files that are more complex without hitting the Available Ram ceiling that your computer has but it will not render any faster as a result it just gives it more headroom to work in!
so overall more ram = more Active space available & no increase in speed (actually maybe a drop in speed as it needs to run slower causing LAG/Latency) so it all depends what is important to you here to whether more ram is of any benefit or just a hindrance but that is down to your own use case scenario!

MOVED: RAM issues regarding CPU + Mobo & OC'ing

Similar Messages

Maybe you are looking for