N95 + CoPilot 7 - Possible RAM issue

Hello,
I have had my N95 for a couple of weeks and I must admit I love the phone in every way. However I am noticing a small issue when running CoPilot and was wondering if this sounds like a RAM issue.
Basically when the app is running sometimes it seems to just lockup (usually if rereouting), occasionally the app will close (especially if I get a message through) or even reboot the whole phone.
I have installed Handy Taskman and I have noticed that when it all goes wrong I have about 100k of free RAM which would suggest that the phone is running low on memory (or very close to it).
Now unfortunatly I only seem to have 13Mb available at the best of times but I am also on a T-Mobile handset running v12 (before demmand paging and the RAM boost).
Spoke to T-Mobile about the updates to v20 and v21, they have no release date. Altough I have noticed that the T-Mobile site no longer has the N95+CoPilot option since they have moved to v7, which is puzzling, maybe the lack of the v20 update means that the app does not run that well, although that is just speculation on my part.
Anyway, I really like the N95 but this memory issue is bugging me. I am considering sending the phone back to T-Mobile and buying a SIM free one so I can update it. Tried local Nokia service center and I already have the latest software for my phone (v12).
If I do get a phone with v20 (or v21) how much extra RAM will I get, and more importantly how much free memory? If I say CoPilot needs about 14Mb - 15Mb free to run well am I likely to get this with the latest software from Nokia?
I know there are ways to get the latest updates on my phone but I don't want to risk it, would much rather send this one back and buy one from Nokia.
Any advice would be greatly appreciated.
Lee

Send it back to T-Mobile and buy directly from Nokia.
N-95 8GB, Wish Nokia made a 3G World Phone.
Release a 3G HSPDA 850/900/1800/1900/2100 and Quad Band GSM phone instead!

Similar Messages

Possible RAM issues?

hi...
i had 2 gigs of DDR2 ram, one gig for each DIMM slot, one of the mem sticks turned out bad, indicated by the hardware test and the fact that i would get kernel panic everytime i start the macbook... so i took the memstick out and now im with 1 gig ram on only the second DIMM slot, the first one is empty....
the problem is that often applications would crash out of nowhere for no apparent reason, ive checked how much free ram of the 1 gig i have, and i have plenty of free, even though running out of ram only decreases performance, not cause crashes...
so is it possible that apps will crash often, and once in a while OS X will lock up for no reason because im dont have mirror RAM on each DIMM aka, i have only one ram stick into the macbook...
PS: ive tried switching the RAM stick to DIMM slot 1, leaving DIMM 2 empty, that didnt fix anything either...

Well I emailed MSI tonight to see if they have any suggestions. I contacted Mwave and they stated that the memory is probably bad and they suggested I send it back to them for testing. Well I will be out of my pc for a week or so and if they deem the memory is good they will just send it back to me. Of course I will be responsible for shipping both ways......
I will post up when MSI responds for anyone interested. Since it is more than just one brand of memory, I would assume it is probably not the memory but I could be wrong.
ttreaders, thanks for the heads up. I followed the user guide when installing the memory to make sure I was using the right slots. The matrix in the user guide states: DDR400 single sticks of double sided ram should go in dim1. But then again who's to say that it isnt a misprint in the user guide?
Thanks for the responses everyone.
Steven

After Effects wont render full res - possible RAM issue?

Not sure if this has ever come up before - I'm unable to render out of after effects and RAM preview half res. When I try and RAM preview the comp just goes black and when I send it to render I get the following message:
After Effects warning: Logged one error - "error Rendering while writing to file. An output module failed. The file may be damaged or corrupted(-1610153464)"
I'm able to RAM preview half res okay, and can render out half res as well. I've tried it with rendering multiple frames simultaneously on and off, clearing the disk cache and turning off any RAM hogging effects.
An obvious cause I've identified is that I've recently upgraded and replaced the RAM on my machine, however, after effects has been the only software effected. Cinema 4D renders no problems and I've had no other problems with the general running of my machine.
Have there ever been any cases before of After Effects not working with certain types of RAM?
My set up -
Mac Pro - Early 2008
OSX Mavericks 20.9.2
2 x 2.8 Ghz Quad-Core Intel Xeon
16GB 800MHz DDR2 FB-DIMM
250GB Samsung SSD

I'm running After Effects CC 12.2.1.5
Sorry should have mentioned, no matter what format I render as, whether it be QT or TIFF sequence, I still get the exact same error.
QT version i'm using is 7.6.6
In terms of reproducing the error, it seems to happen to pretty much anything I try and render, unless it's an extremely simple one layer comp. Rendering a comp with 2 image sequence layers (1920 x 1080) will cause this to happen, but if there's just the one image sequence alone in the comp (and no other layers) then it will render.

RAM issues continued

Hey everyone!
I was just reading an archived post from around this time last year entitled "Strange RAM issue." I too have had a strange RAM issue and specifically with my G4 PowerBook (15", 1GHz) and OWC. I also wanted to upgrade from 512 to 1GB and could never get the machine to work at 1GB. I am currently in the process of sending back my third consecutive OWC brand RAM to them and they are finally going to send me some TechWorks memory that I'm hoping will work. I just can't believe...every single set of memory they've sent me has tested out "fine" to them either after I sent it back or in the latest case even before they sent it to me. But it never works in my computer and always fails the Rember test.
Their latest take on it is that the Rember test isn't always reliable and that it's probably a problem with the memory port in the computer in that it won't accept outside (aka non-Apple) memory. What are some people's thoughts on this? Is it possible that the memory port could work just fine with the original computer's RAM and not with new RAM? Is there any truth to Rember not being all that reliable of a test? (If so, why would they have you use it?)
I'm really getting frustrated with OWC and I was wondering if that's just me or have other people had this same problem?
Brian

APPLE HAS A RECALL for this! READ BELOW AND SAVE SOME MONEY!!!!
Anyone with these issues needs to see this link. Apple has a recall going for G4 15" AL PBs because one of the two RAM slots die. Mine has been "fixed" twice under this program. There's a number to call to get started. Be forewarned, the person on the end of that phone is not the sharpest tool in the tool box. I had to show him where the recall was on Apple's site and how to interpret it. He had to keep putting me on hold to check with a Powerbook Expert (his title was only Powerbook Specialist). They send you a nice prepaid DHL 24 hr turn around shipping box. First time was great. Second time it came back covered in sticky. greasy fingerprints and the metal around the case screws has been badly scratched. I'm still waiting for Apple to address this but since they found 3rd party RAM in my PB, this is my punishment. FWIW, if you let it go in the broken state too long, bad things could happen. Something from the corrupted RAM wrote to my HD and ended up causing all sorts of issues. A reformat and reinstall was the only cure. Here's the link: http://docs.info.apple.com/article.html?artnum=303173
A few private repair places on the web get over a grand for this repair. The repair is a complete new main logic board exchange. Big bucks.
Powerbook Mac OS X (10.4.3)
Powerbook Mac OS X (10.4.3)

IBook G4 2005 onboard RAM issue

Good day Apple Geeks!
I have 3 iBooks with onboard RAM issue and I'm trying to fix them. I've found that Open Firmware may help but I don't know how to disable onboard RAM.
Source: http://web.archive.org/web/20070112065215/http://www.kernelthread.com/mac/osx/ar ch_boot.html
I've found also that it is possible to disable RAM by disabling 3 pins, but I can't manage where are these pins.
Source: http://forums.macosxhints.com/showthread.php?p=216497
Please help me and save my computers.
Best reagards
Message was edited by: danielzywczak

Hey Daniel,
First it would be helpful to know exactly which iBooks you're talking about.
CPU speed, screen size, OS and RAM installed.
So how do you know the all three have onboard RAM issues? Does system profiler just show the 0 slot as empty?
Richard
Message was edited by: spudnuty

V11 firmware RAM issues...what worked for me

I think everyone that has upgraded to the v11 firmware has by now noticed the RAM issues in the v11 firmware for the N95 (At least in the European generic firmware).
The cause of this problem appears to be the 23 or so programs the firmware installs into the phone memory that are all related to the "Search" application on the phone.
I uninstalled them all and the RAM problems went away.
To get rid of them go to Tools > Application Manager and uninstall everything you see related to search.
While I was at it I got rid of Snakes, the System Rush game and the settings and welcome wizards.
Note that this will remove the Search application from your phone entirely so do so at your own risk.
An alternative is to move it to your memory card if you wish.
Useful links: Phone firmware update | Nokia support site

The problem you are having is a DNS issue.
Somewhere along the line your DNS address(s) became deleted from the network System Preferences for your 'active' connection (e.g Airport). It probably was set to default to your local (home) router.
This basically means that safari can not find the web site you attempt to load, so it waits for a very long time.
You can add in the DNS address(s) by either going to System Preferences / Network and selecting your active network connection / DNS tab. OR you can go to Safari Preferences / Advanced and then click the "advanced" button which will take you to the System preferences panel.
The DNS server is provided by your ISP in most cases, or you can use the "Open DNS" servers at 208.67.222.222, & 208.67.220.220.
-Alan

What is Maximum possible RAM upgrade?

I have a Macbook Pro , 2011, 8.2 , Core i7 , 2.4 GHz with 4 GB RAM. I need maximum possible RAM upgrade. I checked in www.eshop.macsales.com. They offer 16GB 1333 RAM. As it is about 150$, I want to confirm if the information is correct.

The max capacity you can currently stuff into two sticks is 16GB and the 2011 models can happily use it all. Speedwise you have to stick with the speed built into the logic board: 1067 MHz for 2010, 1333 MHz for 2011 and 1600 MHz for 2012. Faster RAM won't benefit the system and may even lead to timing issues and weird glitches. For the same reason, it is best to use Mac-certified RAM, that ensures the correct CAS timing.

Kernel Panic and RAM issues

about a week ago I got my first ever kernel panic . This coincided with the mac completely running out of battery due to being on a holiday. Sometimes I can get on without an issue for a while until it shuts down and either tells me there is a kernel panic or it does the three beep black screen. From what I have researched its a ram issue. from memory I have 2x2gb rams installed but it may be 4gb I'm not 100% sure and I cant get on to check. I'm pretty sure its not a software issue as I have booted up on several occasions and deleted things such as Sophos. I'm out of warranty so its up to me to get this show back on the road. My questions:
If I can startup the computer and have it running for a while before it dies and says is a kernel panic, is it unlikely its a software related issue?
Is there any possible way of testing for dodgy rams without physically removing one at a time and seeing what happens?
Is there anything else it could be?
Can rams cause kernel panics, if so do the panic reports reflect this?
cheers

Try to get your MBP functioning. Perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Try a Safe Boot:
http://support.apple.com/kb/HT1564
Kernel Panics can be caused by hardware or software issues. When they occur, log it and post it for review:
http://support.apple.com/kb/ht2546
RAM can be checked by downloading and running REMBER fro Kelley Computing:
http://www.kelleycomputing.net/rember/
In order to get sufficient loops, run it overnight.
Running a MBP till the battery is exhausted is a very bad practice.
Ciao

RAM Issues: 4GB installed, 1GB showing After blinking light

Hey Folks,
After doing some research online I found that my recent issue, which has come up in the past, was probably a RAM seating issue. The issue where the Fan begins running loudly at hyper speed. I forced a shut down, restarted up and saw no issue. Shortly there after the issue returned. I forced a shut down once more, but this time was met with a blinking power light.
I remembered from past experience that it was a sign of RAM issues so I unplugged, unseated and reseated all four of the RAM on my cards. Initial start up was met with same response. In fact it wasn't until the 6th or 7th seating and reseating, and RAM position switch that I got the computer to start back up. (The initial successful start up was with one card and what should have been 2GB.) I checked the About this Mac.. and saw Memory listed as 1GB 667 MHz DDR2 FB-DIMM. The 1GB threw me off because at that moment there should have been 2.
Shortly there after I backed some things up and tried reseating the other card with the other 2 gigs in it. This time I was able to start up however the System still shows the Memory as 1GB 667 MHz...
I did notice a single red light on one of the cards and am curious if this is trying to tell me anything, or if this is an indication of a poor installation. Also looking for any advice on why the computer is not seeing all 4 gigs, and if some of them may be out of service.
Any advice would be much appreciated, and please pardon my lingo because I'm not sure all my wording is correct.
Thanks
MAC Pro 2007/08 running 10.6.8 2x2.66 GHz Dual-Core Intel Xeon

Failed RAM.
Stop beating yourself up over insertion technique. These things get mighty hot and they FAIL.
If they have a reseller's sticker on them, like Otherworld computing or 1-800-Memory or such, call them and ask for lifetime warranty replacements. Otherwise, think hard about how much RAM you really need and go buy some.

RAM ISSUES A215-S7407 - PSAFGU-01V002 SUSPEND MODE ERROR WITH 4GB RAM

Hi, im having some troubles with my laptop.
Because it comes only winth 1GB RAM (512MB x 2) i decided to give it an upgrade to 4GB (Max Capcity) according to specifications details on the support site. So i bought two (2) DIMM Modules KINGSTON 2GB 667MHZ, exact model # KVR667D2S5/2G Everything was working fine until i close the lid and it suspend.
Normally, when i open the lid, it will wake up, and everything will work fine, BUT NOW when it wakes up i have distorted sound and horizontal lines on screen, and sometimes i get a BSOD (BLUE SCREEN OF DEATH) and it restart itself.
TEST THAT I MADE:
ONLY 1 DIMM of 2GB - IT SUSPEND AND WAKES UP NORMALLY (I tested both Dimms 2GB separately)
1 DIMM 2GB / 1 DIMM 1GB (TOTAL 3GB) - IT SUSPEND AND WAKES UP NORMALLY
2 DIMMs 2GB (TOTAL 4GB) - IT SUSPEND AND WAKES UP WITH DISTORTED SOUND AND HORIZONTAL LINES ON DISPLAY.
It seems like the problem appears only with Max. Capacity (4GB) RAM and only when it suspend CLOSE THE LID (POWER LED CHANGE COLOR BLUE TO ORANGE AND FADES AND COMES).
With Hibernation, it works fine, the problem is when it suspend.
It looks that the problem is on the motherboard, maybe a NEW BIOS RELEASE that fix the situation.
I appreciate if somebody can speak to TOSHIBA SUPPORT DEVELOPER and ask them for an BIOS Update.
i know that im not the only one with this problem, there is another person that wrote a post "RAM ISSUES" and refers to the same situation, but as i guess, it wasn't solved at all.

Make sure you install the memory when the light is not flashing, i.e. completly off not sleeping.
What if you try adjusting - MSCONFIG/Advanced Options/Maximum Memory
This signature left intentionally blank.

Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Creating an Aperture web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have just purchased an iMac 27" 2.7GHZ running OSX 10.7.4 with 4GB RAM (16 GB has been ordered). I am using Aperture 3.3.2. When I attempt to create a web page from photos the page goes white and nothing displays. Is this a RAM issue?

I have resolved the issue....turns out that, in my case, running OSX 10.8.1 with Aperture 3.3.2 was what was required! I was running Aperture 3.3.2 with OSX 10.7.x and had this issue.
I hope this helps someone else as well.

X-Fi Xtreme Audio & 4GB RAM issue - latest driver?

:X-Fi Xtreme Audio & >4GB RAM issue - latest driver?T Hi All,
Been using an X-Fi Xtreme Audio with 4GB RAM for ages, no issues.
I purchased and installed a zotac 9600 GT which has GB onboard ram, which works fine, but now my X-Fi has started causing general system instability. (processes using heaps of CPU time whilst apparently doing not much, jerky/slow adobe flash, distorted (slow-motion) audio at random times, etc etc.
In the support section here it says:
Audio issue from output from soundcard with computer having 4GB RAM:
<span class="text">
Keywords: <font>4GB ram, installation, xfi, x-fi
Summary: Customers with computers having <font>4GB or above of RAM and are experiencing audio issues, please download the latest driver for your sound card.
However... When this issue first came up I formatted my primary dri've, reinstalled the OS and downloaded the latest drivers for EVERYTHING. The problem has prevailed..
It was only yesterday that I tracked down this problem in the support section here, and tried to verify that my driver is indeed the latest. But device manager lists the driver as "6.0.0.209" when in the support section here the downloads are named ".xx.xxxx" or something. How can I confirm that I have the latest driver? In any case, I'm almost certain that I have the latest, and this issue is still occuring.
I have read in other forums that on other varients of my X-FI card, the latest drivers have not solved this problem either.. sorry I cant be more accurate than that.
For now, I have solved this problem by simply removing 2GB of ram from my PC. Obviously, I'd like to find a solution and put the other 2GB back in!
Thanks in advance for your help!

Could DanielK please mod this as well, so we can try them. Or Daniel, you could you please tell me how you modified the previous drivers from auzentech as I dont know how these CL drivers work and are modified. What is the inf in these drivers, and if you could tell me the deviceID?s of all the x-fi models, or atleast for x-fi xtreme music as it is my modell. Thx in advance!
EDIT:
I have modified the drivers, was not so hard after all. Im uploading the file now, which should have support for all X-FI cards thanks to Daniel's great job with the earlier version.
Upload finished in 4-5minutes. I will post with link soon to rapidshare!

V3.6.3 Crash Today - Possible Plugin Issue?

Re: v3.6.3 Crash Today - Possible Plugin Issue?
Ref: (a) Crash ID bp-cb196f96-dd38-44d7-bffb-778a22100531.
(b) https://www.mozilla.com/en-US/plugincheck/
This user really does not know whether a plugin is involved here, but also, cannot rule that out. And exploring the Plugin Check page with its limited information, has found the following significant issue un-addressed, and thus, mysterious to him.
Please, consider adding to the Plugin Check page, ref. (b), an explanation on this question>> What must one do, i.e., perform what steps, to update a plugin? I.e, is it infallibly sufficient to download & to run the download? Is updating a fully automated process for all plugins?, or even for some plugins? E.g., does updating an Adobe plugin ever require uninstalling the old plugin first (as does updating the Adobe Reader program, and Acrobat, etc.)? How shall the general user of Firefox know precisely what he/she should perform in this regard, when it is well known that the Adobe updates sites generally fail to recognize and advise the user on the question of whether to uninstall first. We see it in forums, that many of us general users have encountered install failures with Adobe updates, and (1) have found that Adobe updates usually do not work well if installed over the old version, and (2) have found that uninstalling Adobe apps often does not go smoothly and fails to complete the job, leaving vulnerable exe's or dll's hanging around to frustrate our subsequent updating. And, Adobe is not the only offender in this way. A frank and helpful mention of this issue would save much wailing and gnashing of teeth, and if uninstallation is a good idea, please explain how to Uninstall a Plugin, because plugins generally lack an Uninstall button in the Add-ons window of Firefox. And, this begs the question, is it desirable to Disable a plugin, before running the updating installation file? Or is there "no benefit" if Disabled first? Please try to write up these aspects plainly. Ideally, from this user's perspective, placement of this ought to be a few sentences directly on the Plugin Check page. Your consideration and adoption of this suggestion is respectfully requested, and it will be much appreciated.
== Crash ID(s) ==
bp-cb196f96-dd38-44d7-bffb-778a22100531

Posted on Thu 03 of Jun, 2010 10:51 PST by
cor-el:
''You can disable plugins here: Tools > Add-ons > Plugins
See also Troubleshooting plugins
Plugins provide a way to use other program to embed content. so you have to go to the program that adds a plugin and check the options (preferences) to disable the plugin.''
Anyone knowledgeable, please comment.
Thanx for suggesting the Disable button, cor-el, but my question addressed Uninstall of Plug-ins. This was due to the now-recognized problem which afflicts Adobe update patches, that the patch doesn't go well unless the old version is Uninstalled first; thus requiring a clean installation of the fully updated application.
It is my understanding that the Disable button does not necessarily uninstall the old files. When I was unaware of this consistently occurring property of Adobe's patches, I had more than one case of Adobe Reader and Acrobat failing to update completely, causing hours of fruitless troubleshooting, and this continued with the most recent patches to Adobe Reader, the one updating it to v9.3.2, as well as earlier ones. Therefore, it seems not unreasonable to expect that the Shockwave Flash plugin that is now flagged as vulnerable again (v10.0.45.2), needs to be Uninstalled before updating.
Is there no dependable method for Uninstalling plugins?
If not, then one wonders, why not? Is there a reason why Mozilla designs Plugins to be different from Extensions in this regard?

Possible Cascade Issue on 11.1.1.3?

I searched all forums for possible Cascade issues on the add-in and am not finding out anything. We're also up-to date with on the Essbase patches (server and client).
The issue arises when trying to cascade, a spreadsheet is generated but is empty. Likewise, if I select 'One Workbook, Separate sheets', the same thing happens.
We're on office 2007.
many thanks,
cg

Hi Siva,
I think that these are questions that you should ask on the Infrastructure space since the guys there have way much more knowledge on installations. Additionally, I would suggest to discuss these questions with a consultant who is going to have broader understanding of your requirements.
Regarding question number 1, generally speaking version 11.1.2.3 is considered to be an improved and more stable version of 11.2.2.2.
Regarding question number 3, you need to provide more details like number of users per tool, number of concurrent users, volume of data per tool, requirements for High Availability or Disaster recovery etc…
Regards,
Thanos

N95 + CoPilot 7 - Possible RAM issue

Similar Messages

Maybe you are looking for