MOVED: VT Enabled Bios for GX600

This topic has been moved to Notebook Modified & Private BIOS'ses & EC-FW.
https://forum-en.msi.com/index.php?topic=174223.0

Yes he contacted me, donation received and sent him custom BIOS with wanted purpose
Quote from: darkhawk on 02-November-13, 23:38:28
Or you'll need to contact MSI. >>How to contact MSI.<<
I've contact them 4 years ago related to this, but model is too old so its no longer monitored.
21-09-2009:
Quote from: MSI
Hello,Svet
I just get the feedback from notebook bios engineer who takes charge GX600,he said that this model has been EOL and did not want to enable VT or modify anything more for this BIOS.
best regards,
xxx

Similar Messages

  • Hyper-V enabled BIOS for DKA790GX / KA790GX / K9A2 / K9A2CF / KA780G

    Hi guy's,
    Well good news, I received a bunch of BIOS'ses from MSI that have Hyper-V enabled.
    The BIOS are released here as Hyper-V doesn't work for every CPU even if it does have it.
    If it works it work, if it doesn't you are out of luck.
    The BIOS is attached and we STRONLY recommend you >>Use the MSI HQ Forum USB flasher<<!!
    Have fun with them, but beware, they are for use at your own risk!! Nor do we know if they will have new versions in the future.
    BIOS for DKA790GX and DKA790GX Platinum below:

    Thanks all sorted now works a treat
    Cheers
    Evildoc

  • MOVED: Any modded BIOS for Neo4-F MS-7125 (PCB 1.0)........???

    This topic has been moved to BIOS.
    https://forum-en.msi.com/index.php?topic=100654.0

    Thanks for the feeback 
    I did what the folks at MSI put in their BIOS Flashing instructions.  I used the live update as stated and didn't get the desired result. I can't afford to have my PC down while I spend weeks chasing down obscure instructions that should have been included in the Flash Bios install procedure.
    How would one know what to do to perform this miracle Bios Flashing? Can you explain what the /py /sn /wb /cd /cc /ld /e switches are for? Also, why would one clear the cmos or have to ""Load Optimized Defaults"" when no hardware or cmos settings have been changed? Also, what method are you suggesting with the command line awfl859g w7125nms.1d ???
    Inquiring minds want to know. 
    Again thanks for the info. 

  • MOVED: mod GOP BIOS for MSI R9 270 Gaming

    This topic has been moved to BETA & MOD BIOS Section.
    https://forum-en.msi.com/index.php?topic=180753.0

    Alright, I followed the directions and the provided file bricked my XFX Radeon. Fortunately I was able to navigate my way into the USB drive 'in the blind' (no video output) and I had my original VBIOS on my ATI FLASH device and was able to restore to my original.
    So what I decided to try next was modifying MY original bios by manual inserting the UEFI GOP partition into the VBIOS. I flashed it, and now I'm very happy to say that it's working!!!
    It's taken me DAYS to figure out how to do this - so I'll make a shortcut for anyone who needs it. I grabbed the attachment above and I dumped my origin VBIOS. Then I used HxD to hexedit the dollar sign (or whatever it is) to 00 (indicating that there is GOP driver available on the device), and then I directly copied the information from the provided VBIOS for the MSI card into the VBIOS for my XFX card.
    Or you can just follow the guide, that I followed - http://www.overclock.net/t/1389206/do-you-want-uefi-gop-on-your-7950-7970-i-can-add-it-to-your-bios/120#post_20172963
    I held my breath, flashed the new VBIOS, and rebooted. To my surprise and excitement -  I was instantly greated by the MSI BIOS picture. I then let out a huge sigh of relief and configured Windows 8.1 mode. From what I can tell - everything is working great! First boot into Windows took forever, and Windows PNP had to reinstall the AMD driver.
    Other than that, everything went very smoothly :D 
    I'm now gonna let my computer sit for a couple hours and run some basic CPU, GPU, and RAM stress tests to make sure that everything is working correctly. I'll report back when I have the info 
    EDIT: Swap filing refuses to work after this (no idea why). But considering that I have 24GB's of RAM, I just went ahead and disabled it anyways. NOW everything works correctly! Gonna try some games now - see how they perform

  • MOVED: [Request] Latest BIOS for N770 TF 2GD5/OC

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=255842.0

    The latest UEFI/GOP is attached.
    Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
    Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
    To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
    Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash

  • MOVED: Request new bios for MSI 280X 3gb

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=251366.0

    mh is in the link that i already give you
    ms here:  351MS.rar (39.55 kB - downloaded 12 times.)

  • Is there any BIOS for enabling AES-NI for i5-2410M

    I'd like to enable AES-NI in my i5-2410M  X220. I found out that for unlocking AES-NI I need updated BIOS with new CPU microcode revision. Is there any BIOS for  X220 which includes new microcode, which supports AES-NI commans for  i5-2410M?

    http://forums.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/IdeaPad-y570-and-AES-NI/m-p/479013#M39663
    AES-NI has been enabled since the T410 series.  
    Run the tool from that other thread and see if it's there.  
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • MOVED: BIOS for Opetron 144 soc 939

    This topic has been moved to AMD64 nVidia Based board. As it's not a server/workstation board.
    BIOS for Opetron 144 soc 939

    Looks like most people / MoBo´s handle it with the existing E3/E4 core bios.
    Seems like an extremely priceworthy cpu, looking at cost / performance ratio.
    Hard to find but I´ll probably get a 144 or 146 for socket 939 in a few weeks.
    http://www.xtremesystems.org/forums/showthread.php?t=75470

  • MOVED: Required BIOS for Vista on 975X PUE

    This topic has been moved to Operating Systems.
    https://forum-en.msi.com/index.php?topic=104889.0

    That's too hot for 50c in BIOS for your CPU.
    Re-seat all your hardwares especially CPU. Apply Artic Silver 5 as the CPU thermal paste.
    Memtest86

  • [SOLVED] Enabling debug for ath9k in compat-drivers-patched from AUR

    Wireless card: TP-LINK TL-WN951N. lspci says that it is an Atheros AR5416 adapter [AR5008].
    Some background: I'm having the same issues as the OP in this thread, which references this bug report. The problem is that I get a 2000 ms ping every 30 seconds. So 2 seconds of inactivity every 30 seconds. I have the same wireless PCI card, as well. I need to fix this, because it's making online gaming impossible. I should also note that the card is working just fine in Windows 8, however. I am using net-auto-wireless. I have tried using wicd, enabling ath9k's nohwcrypt option, toggling the card's power save, installing the latest compat-drivers-patched from the AUR, toggling different settings in my motherboard's BIOS, and removing the antennae from the card. But nothing has made a significant difference.
    I think I'm really close now. I just have to disable ANI. But in order to do that, it seems that I need to enable debugging for ath9k. But this means that I need to either recompile a custom kernel, or somehow enable debug for ath9k in compat-drivers-patched from the AUR. I'd prefer the latter, as that means that I will have a more bleeding-edge driver. That, and I won't have to touch the kernel as much. What I want is described on this page. But it seems too complicated to me. Please let me explain.
    I've installed things from the AUR before, as mentioned above, and have properly configured my makepkg.conf for my system. So I'd like to use the CFLAGS and such that I've set. I don't understand how everything works in the PKGBUILD; I don't have much experience with sed and awk and regular expressions, and haven't done much shell scripting at all. It seems that at some point in the PKGBUILD, I need to enable debugging for ath9k before it is compiled. Apparently on the last page I linked to, I need to add:
    export CONFIG_ATH_DEBUG=y
    export CONFIG_ATH9K_DEBUG=y
    export CONFIG_ATH9K_DEBUGFS=y
    to some config.mk file. I can only get access to the config.mk file after I install the package with pacman. I've tried adding those lines to my /etc/profile file, and checked, after a reboot, with "set", that those variables are indeed set. But the thing is, with these variables set in /etc/profile, when I run makepkg, makepkg fails with an error 2. I tried again and got the same error. I removed those lines from my /etc/profile, rebooted, tried makepkg again, and everything worked. So putting those lines in my /etc/profile is not the solution, and I feel like I'm doing something very stupid. What am I doing wrong?
    I should also note that I've tried to read the wiki page on compiling a custom kernel using ABS, but it seems to just say "get your custom configuration files" and then just continue (so it assumes that I should already be familiar with the configuration part). The PKGBUILD and Creating Packages wiki pages also seem to be a little... too advanced for me at this point in time.
    So how do I enable debugging for ath9k in compat-drivers-patched from the AUR? I'd prefer to stick with only editing the PKGBUILD and using makepkg, if possible.
    I've really tried to search the web and the arch forums on how to fix this problem myself, but alas, it seems that I need help this time. I greatly appreciate your time for reading my long post.
    UPDATE:
    I've made a lot of progress. I ended up removing the AUR package with pacman by invoking "pacman -Rsn compat-drivers-patched".
    Instructions for [almost] success: First, download compat-drivers-patched from AUR. Then move it to the "builds" directory (or "local", if using ABS). Extract the tarball. After the new directory is created, cd into it. Now here's the important part: run
    $ makepkg -so
    Then cd into src, cd into the directory inside src, then edit the config.mk file. Make sure these lines are uncommented (or created, if not already there):
    export CONFIG_CFG80211_DEBUGFS=y
    export CONFIG_MAC80211_DEBUGFS=y
    export CONFIG_ATH_DEBUG=y
    export CONFIG_ATH9K_DEBUG=y
    export CONFIG_ATH9K_DEBUGFS=y
    (source)
    Now run "cd ../.." to go back up two directories. Now run:
    $ makepkg -e
    # pacman -U <file that was produced>
    And I ran "mkinitcpio -p linux" just in case, but I'm not sure if that is necessary at all. I'm... not touching the kernel, right?
    Now I ran:
    echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
    But bash would say that the file or directory doesn't exist. Even if I prepend it with "sudo", I get the same results. I was only able to get the command to work if I logged in as root. I even put the line in my /etc/profile. The 2000 ms ping every 30 seconds is now GONE. HOWEVER! If I reboot and log in as a normal user, the problem is there again. If I reboot and log in as root, the problem is gone. If I then log out and then log back in as a normal user, the problem does not come back.
    So really, I can avoid the problem if I first log in as root, log out, and then log back in as a normal user. But this is a great inconvenience. I would much prefer if I could just log in as a normal user right after boot, and have everything working.
    Now, how do I get the command to automatically run at boot as root (without me having to log in as root), and work?
    UPDATE 2:
    I got it working. Putting the line in /etc/profile is not the solution. I created a custom systemd .service file.
    Put this into /etc/systemd/service (name it "disable_ani.service"):
    EDIT: Wow. I made a glaring typo here. It should be /etc/systemd/system/disable_ani.service
    [Unit]
    Description=disable_ani
    [Service]
    Type=oneshot
    ExecStart=/bin/sh -c "echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani"
    [Install]
    WantedBy=multi-user.target
    Then make sure to "sudo chmod 755 /etc/systemd/service/disable_ani.service", since root owns this file.
    Then run "sudo systemctl enable disable_ani.service".
    EDIT: It has been brought to my attention that there is a much simpler way than creating a custom service.
    Using a tmpfile:
    /etc/tmpfiles.d/disable_ani.conf
    w /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani - - - - 1
    Done.
    Now ANI is persistently disabled between boots, even if I log in as a normal user right after boot.
    Thanks for reading.
    Last edited by vyu223 (2013-03-12 10:20:19)

    So zsh is telling you that the command didn't work, since it claims that there is no such file or directory. I had a lot of trouble with getting the echo command to work, as well. I found that if out of these lines:
    export CONFIG_CFG80211_DEBUGFS=y
    export CONFIG_MAC80211_DEBUGFS=y
    export CONFIG_ATH_DEBUG=y
    export CONFIG_ATH9K_DEBUG=y
    export CONFIG_ATH9K_DEBUGFS=y
    If the first and second line above were not uncommented in the config.mk file, I couldn't leave the last line above uncommented as well, or else makepkg would fail and give me an error. So originally I had only the 3rd and 4th lines above uncommented/inserted in my config.mk. With that configuration, I could not get the echo command to work, no matter what. Have you uncommented or inserted all of the above 5 lines into your config.mk?
    After making sure all of the above 5 lines were in my config.mk, the echo command still didn't work, even if I preceded the command with sudo, or entered a su session. Bash would tell me that there was no such file or directory. I found that if I actually logged out of my normal user, and then logged back into the computer as root, the command would work. If your shell does not give you any feedback (particularly, "no such file or directory"), then the command worked. In order to get the command to run every time the computer boots, I used a systemd service, so that the command is issued as root. For some reason, it doesn't work if you put the command into /etc/profile.
    Oh, and it would probably be helpful to mention that for the compat-drivers-patched package from the AUR, the PKGBUILD checks to see what your _selected_drivers variable is before compilation. If you set _selected_drivers=ath9k, your compile times will be much shorter.

  • Unlock BIOS for GE60-2OE

    Hello guys.
    I'm looking for unlock bios for GE60-2OE Win7.
    (Bios Version : E16GCIMS.511 / EC Version : 16GCEMS1 Ver5.06 )
    Is it possible to unlock all of hidden options?
    (some examples, enable/disable VT-x, turn on/off GTX765, and so on...)
    And how much do I have to donation?
    I'm at the first to this, so i don't know well...
    Please forgive my poor English.
    Thanks.

    If all you want to do is unlock hidden options see >here<

  • MOVED: No Beta BIOS acees anymore

    This topic has been moved to BETA & MOD BIOS Section.
    https://forum-en.msi.com/index.php?topic=128025.0

    It is not a problem.  The access to the server you are referring to is restricted in the first place.  The password gets changed on a regular basis and it was just changed again recently.  We do not alow that these passwords are posted in the forum.  So please don't ask for it, as any reply that includes the password will be deleted.
    What do you need a new BETA BIOS for?  Is there any problem you are trying to fix?

  • Request unlocked BIOS for MS-1762 barabone

    Hi Svet,
    I have the same problem with "unzhin", required unlock BIOS for my Notebook to enable virtualization (VT-d).
    My notebook Specification:
    MSI MS-1762 with GTX680M -GT70 Barebone
    Bios version: E1762IG6.30J
    Build date: 06/08/2012
    EC version: 1762EG6  ver 4.00
    EC build: 07/04/2012
    Is it possible to unlock?
    I am waiting good news.

    Hi Svet,
    Thank you for your help .
    I have done performed fully unlocked of my Bios.
    About Intel virtualization manually enabled but, still the result the same in my previous screenshot.
    May be my laptop not support Vt-d, and support only Vt-x
    ======================
    This is little illustrate was performed:
    About Vt-x, I've installed VMwave workstation 9 (required Vt-x to enable running game) and it's running OK, but for online game is very lag.
    And for Vt-d, I've installed Parallel workstation 6 (required vt-d to enable running game) in this case I can't running my game (which Directx required) and got warning as per my previous screenshot.
    May be you have any idea . 
    thanks.

  • Unlocked BIOS for GE60 2OC with GPU Overclock if possible

    Hello,
    Could you make a fully unlocked BIOS for my GE60-2OC?
    The latest BIOS version I have is the 620 from 2014-11-28 from the official MSI product site and the EC FW is 1511 from 2014-06-11 also from the MSI product site. If possible I would also like all the overclock options enabled.
    Big thanks in advice 

    Quote from: r.sakharevich97 on 11-January-15, 03:49:11
    If there are any advanced options, not acessable through Afterburner, like the Powermizer Options, could you enable those? If not, you can just leave that, I'm just having some issues with GPU performance and I thought there may be some more advanced settings in the BIOS.
    Anyways, thank you very much for it
    Nope, system BIOS don't have options for discrete card, rather than option to disable it

  • Unlocked bios for MSI CX61 (korea rename a617a)

    hi.
    i want use vt-x. but after bios update, still vt-x disable.
    not change vt-x option after several times update.
    plz, help me or unlocked bios for hidden advanced option.
    windows 7 64bit
    Bios version: E16GBIMS.406 (lastest ver.)

    VT-x is already enabled in 406 bios
    there is no option for it, but its Enabled

Maybe you are looking for