Movement type error in Delivery

Hi guys
I have an issue here at my client's location.
When a return/replacement order(ZRE) is created, it generates a delivery document(LR) automatically and picks movement type 657(puts stock in blocked area) but the client's requirement is to set it for movement type 551(scrapping). I have checked the comfig but am unable to locate the place to make the change.
Will it be in SPRO> Material Management> Inventory Management and Physical Inventory> Movement Types> Copy, change mov types.
please suggest
Will reward points.

Hi,
To solve your querry do the following:
- Use t-code VA02 and enter the order no. created (ZRE order). Now go to main menu GOTO> Item-> Schedule Lines. Here you can see the Delivery date for the item and also the Schedule line category determined by the system for e.g DN.
Now use T-code VOV6 and select Schedule line category as "DN" and view details. Here you can see the movement type 657 Here you can change the same to the required one that is 551.
Now again create a new Returns order and delivery.
This will solve your issue.
REWARD if it helps you!!
Regards,
Ajinkya

Similar Messages

Replace 601 movement with 301 movement type in outbound Delivery

Hello All,
We are using SAP - 4.6 C system.
We have a requirement to create a customer outbound delivery for a corresponding customer Scheduling Agreement but postings should be similar to 301 movement type against 601 movement
When we use 601 movement type - Material Document and corresponding Accounting Documents are created.
We do not want Material Document and corresponding Accounting Documents and at the same time should not use TSA / STO functionality
We want to use only Sales Outbound delivey fucntionality only with 301 postings.
So we tried to use 301 movement type to post an outbound Delivery and below is the error. Please advise a solution to fix this error. or an alternative approach to create an out bound delivery which should not post to an accounting document.
Error -
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
u2022 For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
u2022 For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
Regards,
Siva

Hello all, Jurgen,
Thanks for your responses.
Today, we use 601 movement type for Outbound delivery which creates Material Document and Accounting Documents.
Instead of this, we would like to replace 601 with 301 movement as this has simple plant to plant transfer postings in one of our specific scenario.
We are getting below error when we do Post goods Issue on Outoubnd delivery: we just replaced SD: Schedule line category movement to 301.
Update control of movement type incorrect (entry 301 X X _ L _ V)
Message no. M7 226
Diagnosis
The system could not find entry 301 X X _ L _ V in any of the movement type control tables
Is this the correct approach? Even if we try to create new custom movement ref to 301 to fulfill 301 X X _ L _ V.
Will this work? I am sure in addition to this we need some user exit development.
Presently, this is SD Outbound delivery cycle and will continue with same approach.
we also have our regular scenarios which work with 601. This is one of our exception business cases where we need affects similar to 301.
For above case we can not use STO/TSA with some master data changes as we have already have same plants set-up for regular STO/TSA processes.
The above requirement is special case in one of the business cases.
Thanks
Siva

Movement type determination in Delivery

Hi,
I would like to know how movement type in the delivery is determined,. where in customzing?

Hi
You can have two step procedure or one step procedure depending on your business scenario. When you use either of the processes system picks mvt types differently.
For STO:
Check IMG - MM - Purchasing - PO - Set up Stock Transport Order - Assign Document Type, One-Step Procedure, Underdelivery Tolerance - When you mark one step check box here, then while doing delivery system automatically posts GI (delivery) as well as GR. In tow step procedure these two steps are separate.
In VOV6 if you check for schedule line category NC, you can see two mvt types attached- one for two steps and other for single step - as 643 and 647 respectively.
Thanks

Return Delivery Movement Type Error

Hello all Gurus,
While doing a return delivery with respect to a material document with movement type 122, im getting the following error in my system:
"Update control of movement type incorrect (entry 122 X X)"
I have seen the diagnosis and it is coming as The system could not find entry 122 X X in any of the movement type control tables.
Kindly advise me how to solve this issue.
Thanks and Regards,
Umakanth.

Hi
Try customization
OMJJ
choose Mov.Type 122
and from left menu choose Update control / WM movement types
and then do relevant customiztions
Regards

PGI for STO movement type error Message no. L9005

Hi Gurus,
I have created an STO.Created delivery and confirmed TO.
Now while doing PGI,single step only(647 movement type),
system throws the following message,
"" Error during search for WM movement type (641 1 L K )
Message no. L9005 "".
As per my checking for both IM movement types 641 and 647, ' 641 ' has been assigned as
Ref movement type and " 601" has been assigned as WM movement type.
601 is maintained in WM.Should I maintain 641 in WM?That case I have to change SAP std settings..
If so pls provide me the details for 641 K.
Kindly help.
Best Regards

Hi Kumar,
Try the following:
Maintain an entry for your warehouse with movement type 641 SpStIn and Movment Indicator l combination in transaction OMLR.
And also ,
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location.
Here check whether the warehouse number is assigned to your plant and storage location.
Thanks!
Preethi
Edited by: preethi R on Dec 2, 2008 10:50 AM
Edited by: preethi R on Dec 2, 2008 10:50 AM

671 - movement type - Error update control

Hi,
I have created ew movement type Z71 with reference to 671 movement type for return sto delivery.
We have removed the movement type category 01 from Z71 mvt type, due to this we are not able to do the PGR for return sto deliveries.
While doing PRG system showing error: Update control of movement type is incorrect (entry Z71 X X _ L ).
We have removed that mot.type category for the purpose of updating the RG23D register in Depot, it has been suggested by SAP only. But i don't know the link b/w update control and movement type category.
Please let me know if these is any config for movement type control related.
Thanks&Regards
Lakshmikanth

Hi All,
This is a bug in SAP
SAP has replied with Pilot note. They have given one pilot note to us.
We are going to implimenting in J1IG program for updating the RG23D register with reference to negative post goods issue(material document which is having 671 movement type).
The Pilot note number is 1300928. You can find more details in this note.
We will get back tou you after testing this note.
Regards
Lakshmikanth

Movement type error

Hi All
I"ve created return delivery from customer sales return, after creating goods movement type should be for return i.e. stock should increase, instead its taking 601 m. type for Goods Issue!
Where to change so that delivery takes proper m. type for return delivary?
please reply as soon as possible.

Hi
In addition to what Mr.Lakshimipathi has suggested in VOV6
if you choose movement type 655 it will go to quality inspection
if you choose movement type 653 it will go to unrestricted stocks
if you choose movement type 651 it will go to blocked stocks
The standard says it should be either 655 or 651
Regards
Raja

Movement type error for Service Processes

Hi All,
We are working on service scenario with CRM5.0 and R/34.6c.
The problem that we face is as follows,
Whenever we make a service confirmation with products with item cat group BANC the movement type is correctly determined as 261 but whenever our service confirmation contains the products with item category NORM, the R/3 system returns the error that the movement type 291 is not found for the business area.
Regards
Rekha Dadwal

The error was due to the material type. We changed the material type and now it works fine

Change of Movement type for Return delivery of Goods Issue doc in config

Hi SAP Gurus,
I am doing return delivery of goods issue document.then the system automatically pick the movement type
Like Example i am doing return delivery for Goods issue 201,the system should pick 202 but instead of 202 its picking 902 movement type which i defined.
Where exactly i have to change in configuration please let me know....
Thanks,
Sivakumar

In OMJJ, check the reversal movement maintained for the one your facing the issue.
If any further clarification is required, revert.
If helpful award points
Regards,
Vivek

Default Movement type in inbound delivery

Dear Experts ,
Can anyone please tell me where in configuration is the movement type assigned against an inbound delivery .
My requirement is to change the defalut movement type 101 for GR against inbound del to 103 , but only for a particulat PO document type.
Eg PO doc type Z001 will have the defalut movement type in GR against inbound delivery as 103 .
for all other document types the movement type will be 101 .
Please suggets if it is possibel & how .
Regards
Anis

Hello Anis,
Generally, we go for movement type 103 for bolcking the goods reciept. As per SAP practice,we put the material in blocked stock, if we want to carry out inspection or before taking it into unrestriceted stock. Either way, we found a material which is faulty and we put it to blocked stock to return it back to vendor.
Why you want to go for blocked stock, during reciept, as generally blocked stock movement type is used after Goods reciept are done based on above explanation.
I guess, still if you want to use 103, you can do this either for particular vendor or for a particular material.
To do it at vendor level, you can mark blocked stock indicator in vendor master record, either for material you can set this indicator in material master record.
BR,
Tushar

Movement type 122 - return delivery

Dear gurus,
I have material type FHMI-PRTS.
During return delivery with movement type 122, system shows following messages.
qty balances are not sufficient in the register
Pl. elaborate in details,
Regrds,
Devendra

Hi,
Check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here check whether Movement Types are maintained.
Regards,
Manish

132 movement type errors in MF47 or COGI

I understand we get 101, 102 and 131 errors in cogi.. but if there an error while reversing a backflush in REM (132) and if an error occurs, will that be seen in MF47 or COGI?

Hello Swathi,,
I am never face the issue of movement type 132 error in MF47/Cogi..
Whenever we reverse the GR, system just create the planned order and Qty will reduce from the Stock.. It is SAP standard behavior..
if your reverse qty more then stock qty in that case system pop up error.
If you have separately back flush MF60 for GI and GR with respect to MFBF, In that case if you try to reverse the GR qty system not create planned order...
Which error you expecting in MF47 and why ?
Please check and revert
Regards
Umesh Mali

COGI Movement type Error

there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
what might be the problem?
how can i fix this?
could anyone help plz

Hi,
Try to move the components from unrestricted to SO stock using MB1B + 412E - maybe it helps.
Regards,
Csaba

Movement type:crosscompany replenishment delivery

Hi,
How is the movement type in a replenishment cross company delivery (VL03N) filled in? How is this determined (LIPS-BWART)?

Hi,
In OMGN Delivery Type is assigned to the Purchase Order Type. There are only 2 types delivery types used
1) NL--> Replenishment Dlv.
2) NLCC--> Replen.Cross-company
Also in the T-code 0VLK Default order type is DL for the above mentioned delivery Types
Once delivery type is determined the system searches for the item category in the T-code 0184.
Delivery Type   Item category Group    Usage       Item category
1) NL                 NORM                         V                   NLN
2) NLCC             NORM                        V                     NLC
This item categories are also defined in the T-code VOV7
Once item category is determined the system will find the schedule line category under the following path
Sales and Distribution>Sales>Sales Documents>Schedule Lines>Assign Schedule Line Categories
Item Category MRP type Schedule Line Category
1) NLN              Blank              NN
2) NLC              Blank              NC
These Schedule line categories are defined in the T-code VOV6 and here you will find the Movement Type
1) NN--> 641 and 647
2)NC-->643 and 645
This is how the system will find the movement Type and the same will be found in the delivery document

BAPI_GOODSMVT_CREATE for mov.type 101 for Delivery

Hi expert,ù
I have to use the BAPI_GOODSMVT_CREATE to create a 101 referring to a delivery but I can't find wich parameters I have to set.
If I refre to a purch.order it works correclyt, but the same settings are not applicable for delivery.
Any documentations or example?
Thanks

Hi,
Check if this is useful.
*-Step 1: Create Inbound delivery from outbound delivery
Input the delivery number, date & creator name
to impkf structure
*-- Do MIGO using Outbound delivery
wa_imkpf-bldat = goodsrecdate.
wa_imkpf-budat = goodsrecdate.
wa_imkpf-xblnr = deliverynumber.
wa_imkpf-usnam = sy-uname.
CLEAR ws_i_cnt.
*-- Pass all the necessary details to I_MSEG - item details
CLEAR wa_wueb. REFRESH i_mseg.
LOOP AT i_wueb INTO wa_wueb.
    CLEAR wa_lips. CLEAR wa_mseg.
    READ TABLE i_lips INTO wa_lips WITH KEY vbeln = wa_wueb-vbeln
                                            posnr = wa_wueb-vbelp BINARY SEARCH.
    IF sy-subrc = 0 AND wa_lips-lgnum NE space. " only for WH managed
      ws_i_cnt = ws_i_cnt + 1.
      wa_mseg-line_id = ws_i_cnt.               " Line Number
      wa_mseg-global_counter = ws_i_cnt.        " Line Number
      wa_mseg-bwart = '101'.            " Movement Type
      wa_mseg-matnr = wa_wueb-matnr.            " Material Number
      wa_mseg-werks = wa_wueb-werks.            " Plant
      wa_mseg-lgort = wa_wueb-lgort.            " Storage Loc
      wa_mseg-charg = wa_wueb-charg.            " Batch
      wa_mseg-kzbew = c_b.                      " Movement Indicator ( B indicates
Goods movement for purchase order)
      wa_mseg-erfmg = wa_wueb-erfmg.            " Quantity
      wa_mseg-erfme = wa_wueb-erfme.            " UoM
      wa_mseg-bprme = wa_wueb-erfme.            " UoM
      wa_mseg-menge = wa_wueb-erfmg.            " Qty
      wa_mseg-meins = wa_wueb-erfme.            " UoM
      wa_mseg-ebeln = wa_wueb-ebeln.            " STO Number
      wa_mseg-ebelp = wa_wueb-ebelp.            " STO Item Number
      wa_mseg-migo_elikz = 1.                   " Delivery completion indicator( 1 - set automatically)
      wa_mseg-bstmg = wa_wueb-erfmg.            " QTY
      wa_mseg-lgnum = wa_lips-lgnum.            " WH No
      wa_mseg-vbeln = wa_wueb-vbeln.            " Delivery Number
      wa_mseg-posnr = wa_wueb-vbelp.            " Delivery Item number
      wa_mseg-lsmng = wa_wueb-erfmg.            " QTY
      wa_mseg-lsmeh = wa_wueb-erfme.            " UoM
      wa_mseg-bukrs = wa_wueb-ekorg.            " Purchase org
*-- Get Vendor Number from STO
      CLEAR wa_ekko.
      READ TABLE i_ekko INTO wa_ekko WITH KEY ebeln = wa_wueb-ebeln BINARY SEARCH.
      IF sy-subrc = 0.
        wa_mseg-lifnr = wa_ekko-lifnr.          " Vendor number
      ENDIF.
      wa_mseg-ean11_bme = wa_wueb-ean11.        " EAN11
      wa_mseg-insmk = space.                    " Stock Type ( space - Unrestricted use)
      wa_mseg-weanz = 1.                        " Number of GR/GI Slips to Be Printed
      wa_mseg-weanzx = c_x.                     " Updated information in related user data field
      wa_mseg-wempfx = c_x.                     " Updated information in related user data field
      wa_mseg-abladx = c_x.                     " Updated information in related user data field
      APPEND wa_mseg TO i_mseg.
    ENDIF.
ENDLOOP.
*-- Do MIGO
CALL FUNCTION 'MB_CREATE_GOODS_MOVEMENT'
    EXPORTING
      imkpf = wa_imkpf
      xallp = c_x
      xallb = c_x
      xallr = c_x
      ctcod = c_migo
      xlisu = c_x
    IMPORTING
      emkpf = i_emkpf
    TABLES
      emseg = i_emseg
      imseg = i_mseg.
IF i_emkpf-subrc = 1.                  "Inbound delivery creation is success
    ws_c_indelvry = i_emkpf-msgv1.

Movement type error in Delivery

Similar Messages

Maybe you are looking for