Movement type issue-Generate HU packing material item in inbound dlv

Dear All,
I am using handling unit management with automatic generation of packaging material item in outbound and inbound delivery.
I am facing a problem in inter-company and intra-company STO flows.
For inter-co flow, I create PO doc type NB and an outbound delivery. When I do GI for this, and inbound delivery (EL) gets created. The movement type for generated packing items is 601 in outbound deliveries and 501 in inbound deliveries. That is working fine.
For intra-co flow, I have PO type UB and outbound delivery. When I do GI, again the inbound delivery type getting created is EL and the movement type for generated packing item in inbound delivery is again 501.
According to SAP:
Movement types for stock transfer within a company code:
For the movement types of the generated packaging material items, you use
603 (outbound deliveries) and 605 (inbound deliveries).
Movement types for stock transfers between company codes:
For the movement types of the generated packaging material items, you use
601 (outbound deliveries) and 501 (inbound deliveries).
Any ideas?

Hi,
Sorry, I think I made a mistake.
I have just found out that it's not possible to assign several confirmation category....
Since you are using SPED output, system calls FM GN_DELIVERY_CRATE to create inbound delivery.
Maybe you need to do modification.
======================================================================
Main Program     SAPLV50S
Source code of   LV50SF19                                                 64
             ENDIF.                                                  "^_983945
             LIPS-UEPOS = POSNR_UMSETZUNG-NEU.
           ENDIF.
         ENDIF.
SPE OUTB combination of unchecked -> special case, gn_vwpos is initial
         IF XKOMDLGN-VWPOS IS INITIAL AND V50AGL-UCDEL_TO_DEL_COMB IS INITIAL.
           GN_VWPOS = XKOMDLGN-VGTYP.
         ELSE.
           GN_VWPOS = XKOMDLGN-VWPOS.
         ENDIF.
======================================================================
Here is where system set USAGE for item category determination.
In standard logic, for PO inbound delivery, it's using 'V' to determine item category.
If you need, maybe you can consider to do modification here to set different USAGE indicator to determine different item category.

Similar Messages

Movement type for customer supplied packing material returns

Hi,
The scenario is like this,customer will give the packing material to the company.Company does the service required & return that packing material to customer.Presently we are using 624V movement type can you suggest some other movement type for this.
Regards,
Rajesh

hi,
this is to inform you that,
if customer is supplying the packaging material to us receive it through 501 - M and Issue 502 - M, manually if you want to track the packing material wise take the material into NON VALUATED ITEM.
you can create a Z report for the same and the fields in that is,
material number, packing material associated with that, quantity received thru 501 - M and consumed against 502 - M and GI quantity.
balajia

POS sales and return movement type Issue

Hi,
We are facing issue whlile doing POS sales and return, when sales transaction data transfer to ECC from POS its create Idoc and material document.
When I look the material document for sales its showing movment type 252 instead of 251, as same in return material document 251 instead of 252,
When I look the cofiguration settings are perfect in SPRO.
How to resolve this issue and what changes need to be done
regards
Satish

Satish,
are you sure that you applied the right logic regarding signs in the POS inbound?
In WPUBON the Field E1WPU02-VORZMENGE must be negative so the POS inbound will consider this line item as sales and would put 251 als movement type if the sign is not minus it would put 252.
With the WPUUMS it is the same.
Are you using WPUBON01 or WPUUMS?
Regards Carsten

Which movement type to show Directly Procured material in stock?

Hi All
Is there another movement type that I can use to reverse from a network, Directly Procured material in to stock?
Our issue is that we plan and have delivered directly procured material to out production plant (Plant A) and the PO has an account assignment of 'N'. The production team then decide (due to unforseen issues) that they do not need it anymore for that network/WBS and want to send it to our central warehouse (Plant B)
In order to recover the cost from the network, we process MB1A mvt 222 with reference to the WBS in Plant A and then stock transfer to our central warehouse, Plant B
My question is....can we use another movement type to remove the cost from the project/network/WBS and return the material in to stock?
I don't want to reverse the PO but can i use that as a reference?
Your help is appreciated
Regards
Darren

MB1A transaction is a goods issue
goods issues are valuated with the material master valuation price.
in goods issues you cannot reference purchase orders (this is only possible in receipts)
there is no goods receipt transaction for material which was already received against a PO.
You credit the network with the leading price from material master, there is no value flow in the opposite direction. But you can control the valuation if you allow external value entry in the movement, which is usually not liked by auditors, especially as such movements are executed by warehouse personnel

Return Delivery- Move type issue

Hi frnds
I have an issue i have not been able to resolve.
The client wants to scrap the material when receiving the return delivery(LR) on a return order(RE). Initially 657 mov type was asssigned to DN schedule line category in VOV6, so i changed it to 551 but when i ran the return delivery i got error that the update control for this move type does not exist.
I then copied the mov type 657 in OMJJ and renamed it (999) and in the update control kept the ref mov type as 551 but on running return delivery the stock is still going in the blocked area instead of getting scrapped.
Does someone have any suggestions for me.... I think i am missing something but am not able to figure it out. I hope i can scrap the material form a return delivery.!!!!
If i use move type 657(GR-blocked stock) and then use 555(GI-scrap from blocked stock) in Move type step 1 in transaction VOV6, will it work ?????
Will award points..
Message was edited by:
Comes Naturally

Hi
The movement type for Return Delivery is 651. Pls make use of this movement type to first post the goods as Returns goods.
Then using 453 you can post them into unrestricted stock.
Reward if this helps.

262 Movement Type Issue - Does not check order

Hello,
A material is issued via a 261 to an order.
Say this order is now complete and we want to do a 262 back into stock SAP does not check whether or not the material had ever been issued to the order I entered in my 261.
Is there anyway we can have a 262 movement type check whether the material is in the order we enter?
N.B. I am aware we can use MBST, however this doesn't help for partial reversals.
E.G.
MIGO - 261
Material     123456789
Order2       123XYZ
Plant          1234
MIGO- 262
Material    123456789
Order2      RANDOMORDER
Plant        1234
The above scenario will post okay. We don't want it to as Order 2 has never had anything to do with material 123456789.
Any help is greatly appreciated.
James

Shakti,
You did not read my problem.
As I have said using MIGO to reverse the 261 does not check if the material was issued to that order. If I wanted to I can 262 back to an order that I've just found randomly....
My question was how can we get SAP to check whether the order we used has issued that material before (in the 261).

IS Retail - POS sales and return movement type issue

Hi,
We are facing issue whlile doing POS sales and return, when sales transaction data transfer to ECC from POS its create Idoc and material document.
When I look the material document for sales its showing movment type 252 instead of 251, as same in return material document 251 instead of 252,
When I look the cofiguration settings are perfect in SPRO.
How to resolve this issue and what changes need to be done
regards
Satish

Satish,
Check following IMG settings;
IMG - Sales and Distribution - POS interface - inbound - Aggregated Sales Control
IMG - Sales and Distribution - POS interface - Inbound - Movement type-dependent control of sales as per receipt
Bye - Muralidhara

Movement Type for GR to Post material in COST center

Hi ...
Do I need to use 101 Movement type even to Post Material into consumption...
or
in simple words if i have account category "K" in Purchase Order then which Movement type I should select to prepare GR and do I need to use same MIGO transaction.
Regards/SANDEEP

Hi,
Basically 101 Movement type would mean that the Goods are being received into the enterprise (could be a Warehouse,Cost Center or a Logical Storage location).
Migo is a transaction which enables to document the Goods Receipt and henec this needs a reference document which could be a PO ,Production Order etc,.
In the normal Goods Receipt into a Warehouse against a PO the Goods are valuated(Inventorised in Physical & Financial Terms).
In the case of the goods received against a PO for cost center the value is directly posted into the Consumption account instead of the Stock account in case of the former
I hope the above is sufficient.
Thanks & Regards,
Nagarajan

Stock Transfer using movement type 309 of in-transit material

Hi Gurus,
We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
Thanks

In real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
What exactly do you want to do?

Movement type issue

Dear experts,
Plant B created PO for Qnty 10 from Plant A.wrt PO Plant A created sale Order and Qnty 10 ready for Delivery. Now I am doing Del with vl01n. Till now everything is fine. after doing the Del the status of Sale Order is -completed- But the PO status is still Open. Since I created Sale order with refernce to PO , and when I did the delivery why the status of the PO is not showing completed? Any suggestions please
Thanks,
Kanna Palle.

Chandrasekhar,
what you said is right. But is there any possibility to change the movement type in the delivery? , So that I can make GI and GR in one step including the automatic picking of serial numbers. Hence when I do the PGI ,The automatic GR is the Requirement.The Process is stock transfer between Plant to Plant under one company code.I guess 647 will work perfectly , But since I am doing sale order to delivery , its picking 647 movement type. Any suggestions pls
Thanks,
Kanna Palle.

Mb01 101 movement type issue

Hi
i have try to create goods receipt with reference purchase order in mb01 t.code during save showing error update control movement type is incorrect entry (101 _ _ _ B) plz suggest.
Regards
Sam

Hi!
can you please post the error message number and type...
have fun
Flo
PS: a new transaction needs not to be a challenge

Customizing movement type issue

i want to create a movement type and i want to assign some account assignments to it....how do i go about it

First pick the standard SAP movement type which is closest to your new movement type requirement. Then create the new movement type by copying from the selected movement type. In case of customized movement type, copying the best option, manually creating is impossible as there are too many variables to account for..
The after create the new movement type the necessary accounting changes can be configured easily.

Packing material in inbound delivery - intercompagny process with SPED

Hi,
I am processing intercompany stock transfer using SPED functionality, with automatic creation of inbound delivery.
Using HUM and WM storage location managed, I would like to add automatic packing material items in inbound delivery.
What I did already check:
1. there is a plant in HU (packing material type in transaction VHAR; plant determination: B).
2. there is an item category in HU (transaction 0184; following entry: EL / "blank" / PACK / / ELP -> Inbound delivery type EL, packing material has general item category group "blank" , then I expect item cat ELP in inbound delivery).
With these settings, automatic creation of inbound delivery does not work anymore: output SPED failed. Error message is VN056:
"Processing log for program /SPE/STO_ID_PROCESSING routine STO_ID_CREATION". When I check output analysis, it is mentioned for SPED : "Output ignored (requirement 408 not fulfilled)".
I also tried with following setting:
transaction 0184; delete previous setting; add following entry: EL / VERP / PACK / / ELP -> Inbound delivery type EL, packing material with general item category group VERP.
In that case, automatic inbound delivery creation OK but no packing material in it.
Any idea to help me?
Thanks in advance.

A few years ago I got some help that got some Inbound delivery functionality working, but it was never put into production.
1. Receiving storage location specified on the STO.
2. Receiving points set up in the receiving plant: IMG > Logistics Execution > Shipping > Basic Shipping Functions > Shipping Point & Goods Receiving Point Determination > Assign Goods Receiving Points for Inbound Deliveries.
3. On packaging material to be used the assigned packaging material group should coincide with the IMG setting of the packaging material type assigned to the packaging material group.
4. Assigned movement type 101 to the DIGN item category: IMG > Logistics Execution > Shipping > Basic Shipping Functions > Deliveries > Define Item Categories for Deliveries
Other settings but not mandatory
1. In delivery copying control assigned source NL to target DIG: IMG > Logistics Execution > Shipping > Basic Shipping Functions > Deliveries > Copying Control > Specify Copy Control for Deliveries > Define Item Categories for Deliveries
2. Make packing control mandatory for item category DIGN: IMG > Logistics Execution > Shipping > Basic Shipping Functions > Deliveries > Packing > Packing Control by Item Category
3. HUM Required for Plant/Storage Location: IMG > Logistics General > Handling Unit Mgmt > Basics > Technical Basics > Materials Mgmt > Inventory Mgmt > HU Requirement for Storage Locations
In our process the HU was already created in the Outbound delivery for the STO. These HU were then copied to the Inbound delivery. It still works in our DEV client, but it's not being used. Hope it helps.

Movement type in MRP generated reservations

Dear Experts ,
I have a scenario where in a particular material requirement is generated through MRP ( MRP Type PD)
The system creates a reservation with movement type 261 for that particular material.
BUT
My process of goods issue is as under :
The goods are received in main store .
The goods are transferred by the store keeper from main store to the production store .
Finally the goods are consumed from the production store against an order.
I WANT THE SYSTEM TO DEFAULT MOVEMENT TYPE 311 AND NOT 261 IN MRP GENERATED RESERVATIONS .
How can i do it ?
regards
Anis

Dear Anis,
Are you meaning the reservation for a production order?
In this case the system creates the reservation only once when the planned order is converted into a production order and
saved.Once after the production order is released the system allows you to post the good's issue against the reservation no in
MB1A.
Defaultly the system will create for 261 movement.
You can change this using the settings in OPKA(But think before making this change).
Regards
Mangalraj.S

SAP report for movement type and material type

Hi!
I would like to use a standard SAP report to give me a list of all the movement types (much like MB51) but instead of material I would like to select on Material type e.g. ROH. The result should for example be a list of the movement types 501 on material type ROH.
It is urgent, if you could help me I would be very greatful!
Sincerely
Anders Öhrling

Thanks for your answer!
I have managed to join the two tables and created a report that will work, except that the amounts in local currency that is given by movement type 201 is not negative (as in MB51). I need all movement types that generate a debit must be shown as a negative value. Wo when I summarize all the movement types I end up with the value of 101 minus 201.
Is that possible without ABAP programming?
Sincerely Anders Öhrling

Movement type issue-Generate HU packing material item in inbound dlv

Similar Messages

Maybe you are looking for