Moving average price in case of project stock

Hi,
How to check the moving average price of a material in case of project stock?
T code or table will help..
Regards,

Hi,
Since project stock is a special stock, it is procured and cosumed against that particular project / WBS Element, you will not get value of it as a movong average price , may be you will get the same in project progress report. You can check report MBBS - Valuated Project Stock
Regards,
Vikas

Similar Messages

Moving average price in case of semifinished product.

Dear All,
Our client wants to go for moving average price in case of semifinished material, which is supposed to be normally standard price against our advice. The problem is that MAP is not getting updated after the GR against the production order. What settings I need to check in cusomization from PP point of view to solve this problem. Ideally the summation of cost of raw materials has to be the cost of semifinished material.
I did the settlement and the MAP got updated. There are few questions I want to ask u are?
1. What MAP should I keep when I create the semifinished material for the first time?
2. What the base to calculate the target cost in production order? Currently the target cost is zero for that the varience is huge which will be going to affect the MAP in a big manner after setllement? What should I do in that case?
Ur valuable inputs are awaited at the earliest. It's very very urgent.

Hi
There will not any big problem if your client insists upon MAP for the material instead of your suggestio for having S as per std. SAP suggestions. There will not be any change in material price during confirmation if you have V indicator but if you have S as indicator there will be change in price due to costing and settlement. It is not that system will not do anything for the materials having V indicator, check the field value for Standard price , it gets updated. Your costing calculation completely depends uopn the settings that has been customised in OPN2 i.e the settings available for valuation. You cancompletely control all these.
Pirce for your semifinished should include the inputs to it and any other parameters which you would like to add. You can always change the price manually with MR21 if you have Zero stock.
Best Regards

Moving average price in case of goods receipt with free of charge

Hello everyone,
Need some inputs......
Sometimes we receive materials from suppliers free of charge (e.g. warranty replacement) u2013 moving average goes down u2013 worst case 0,01 EUR/piece. This causes problems in government reporting and export documentation EX1 and clearance/pro-forma invoice) for deliveries to field engineers (Order type ZIS1, ZIS3 u2013 item cat. ZICA), because moving average price is used for the values in government reporting and on the invoices. In government reporting and on invoices we need to state a true value of the part.On the other hand, the value warehouse stock is depending on the moving average cost as well.Could you please let me know, how to handle such receipts from the supplier to have a correct stock value and correct values on invoices and government reporting?
Thanks
Deepthi...

Hello Deepthi,
It depends on your company policy. If you want to valuate the material along with the material purchased handled in moving average price, free consignment will bring down the MAP for the material.
In that case, you can revaluate the material to the original price in MR21 transaction.
If you are not going to handle the materials received free of charge along with the purchased material, you can go with another material code, with non valuated material type.
But i guess, no company will be asking for another material code. So go for revaluation after the receipt of free consignment.
Regards

Function module to update Moving Average price for Material?

Hi guys,
is there a function module or BAPI to update the moving average price in a material master?
i have tried UPDATE_MATERIAL_PRICE but guess it does not work. I have also tried MB_UPDATE_MATERIAL_PRICE and it seems to not work. Any pointers?

We have a need to update the moving average price using movement type 531 for a custom solution we have built for other business requirements. We have not found a way to update the moving average price yet using any of the information provided here. Can any offer any other suggestions. Looking for a BAPI, user exit, or function module that we could tap into in order to updat the moving average price. Here is what we found...
We believe that the following suggestions doNOT apply...
BAPI_MATERIAL_SAVEREPLICA is basically for updating material master records in general. It does not address the offset to the alternate accounts.
BAPI_COSTESTIMATE_UPDATE_PRICE does not adjust the moving average price.
CIML_UPDATE_MATERIAL_PRICE updates Project Stock.
Any help would be greatly appreciated.

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

Moving average price in Semifinished material.

Dear All,
Our client wants to go for moving average price in case of semifinished material, which is supposed to be normally standard price. The problem is the MAP is not getting updated after the GR against the production order. What settings I need to check in cusomization from PP point of view to solve this problem. Ideally the summation of cost of raw materials has to be the cost of semifinished material.
did the settlement and the MAP got updated. There are few questions I want to ask u are?
1. What MAP should I keep when I create the material for the first time?
2. What the base to calculate the target cost in production order? Currently the target cost is zero for that the varience is hugh which will be going to affect the MAP in a big manner after setllement? What should I do in that case?
Ur valuable inputs are awaited at the earliest. It's urgent.

Kindly go thoroug following it will solve your issue
Genrally SAP suggest Std price for semi & fin
but some company are useing MAP so i think the client want MAP then also it will not create any problem but this is laways FICO decision
now MAP is not getting updated
while goods movement system update G/L AC automatically the price used for updating the GL is either std or MAP depending on which is maintain in material master
your MAP will get updated only after settlement of Production order If your production is make to order in that case costing is against Sales order & no issue of settlemnt of Production order so MAP will not be updated in MTO
which price you should maintan in material master & target cost & variance
initally u upload master data with price 1 After that u take costestimate run & realse the price that will be std price Now you can see the varinace along
after realsing the cost estimate you can chane MAP in mr21/22
You can maintain both the prices in material master but while GL AC updating system check the price control & then pick price
but it is advisable to have STD PRICE

Moving average price effect due to 309 mvt type

Dear Experts,
when we do stock transfer (309 mvt type ) from mat A to mat B , moving average price of A gets copied to moving average price of B if the stock of material B is zero.
If there is stock for material B, moving average price of A gets added to the stock value of B & MAP is recalculated.
Is there a way to ensure when we do material stock transfer, same MAP price is also captured. please suggest.

>
Mathew John wrote:
> After transferring the material from A to B, then moving average price will change for both the materials.
>
> So if you want to change the MAP, use the t-code MR21 and make the changes. Difference amount will be debited and credited in PRD account.
for what reason should the price of the issuing material change?
can you proof what you wrote?

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

Moving Average Price for non stock material

Hi All,
We are looking at loading a large number of material masters for items that will not be stocked - i.e. an account assignment will always be provided during purchasing.
When we load these materials - what should the moving average price on the accounting tab be set to? If we put an estimated price in - then when we purchase we will get a warning if the variance between the purchase price and the moving average price is too great. And then when the material changes in price (in lets say a year because the vendor has increased prices by 10%) we can no longer update the moving average price.
What is the best practice in this scenario?
Kind Regards,

non stock material (standard material type NLAG) does in general not have accounting views, hence it has no fields for moving average prices.
however it can be customized to have an accounting view, we did it too. This servers the requisition process, with accounting view the price defaults to the requisition. without accouting view, the valuation price needs to be entered manually by a user in the requisition.
The MAP gets only updated if the stock is posted to inventory, which will never be the case for non-stock material, because of this you should always be able to change the MAP directly in the material master with MM02, or if not possible in MM02 with MR21.

Stock of material and moving average price for each valuation type

Hi
Is anybody aware of any standard report which will show the stock of material and moving average price of the material for each valuation type.
M5BL is one report but would like to check if there is any other report.
Regards
Vaibhav Mahajan

Hi,
Check MB52, select 'Display batch stock' option.
Batch is nothing but your valuation type.
You can see those details there.
Regards,
Piyush

Freight accrual - Stock Transport Order - Moving Average Price.

Hi all
   I am trying to add delivery costs (freight accrual) to Stock transport order, where the material in receiving plant is valuated at Moving Average Price (MAP). So, the freight cost is getting rolled over into the material price in the receving plant because of MAP valuation.
    But my client doesnot want that. Instead we want the freight accrual to post to a expense or COGS freight account. Is there way to control this when material is valuated at MAP in receiving plant?
Thanks
Vamsi

Currently, with the outbound delivery for STO and PGI, the following the accouting document is generated.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10200
Cr Freight Clearing Account                       200
Where as I want the accounting document as follows when outbound delivery is created.
Cr Inventory Account (sending plant)   10000
Dr Inventory Account (receiving plant) 10000
Dr COGS Freight Account                          200
Cr Freight Clearing Account                       200
Edited by: VamsiM on Sep 14, 2011 12:17 AM

Moving Average Price and Total Stock not updated for MTO scenario

We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
2)Moving average price does not updated after periodic settlement is carried out.
It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
p/s: on ECC5 system.

Hi,
Good morning and greetings,
The standard SAP says as below
The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Negative stock ('moving average price for material is negative')

Dear all,
I have a question with regards to negative stock.
Does it means if I configure my system (i.e. OMJ1) by allowing the negative stock for a particular plant, the problem of Invoice bumping the error (i.e. 'moving average price for material is negative') WILL NOT happen at all again?
If not, how can I solve this problem?
thanks.
tuffy

Hi,
As Jürgen said price can't be negative. You need to correct MAP first before posting the invoice. Try running consistency check (Tcode: MB5K) you might know the reason why system is showing -ve moving average price and then you can correct.
Regards,
Rakesh

Moving Average Price-calculation

Dear All,
Can anybody explain about the Calculation of Moving average price of the material in case of 309 movement i.e. Material to Material Transfer.
Thanks and Regards,
Girish

Hi there!
At 309 movement type (materia to materia transfer), moving average of receiving material is calculated as:
Existing value of receiving material (existing stock x existing moving average price) + value of units transferred (units of sender material x MAP of sender material) / (Existing units of receiving material + units transferred)
Please revert if more explanation required
Regards

Moving average price has become Zero

Hi,
Can you please help us , if you have any ...this kind of situation in your projects.
Scenerio:
We are using Workflow mechanism for creation material in Master data client
01. After creation of Material, it will go for approval (to six departments in SAP Itself ) and after their approvals,it will be moved to "Book of Records"( to Transactional client)
02.If the requester is submit the Material for approvals, it will create IDOC and will be moved to "Book of Records"( to Transactional client).
03.If any error is there in the Material views, IDOC will be failed in Outbond system( Transactional client)
in this case.We use BD10 to move the changes manually.
Problem is,
01.We moved manually 10 materials on 29/10/2008 through BD10 to Transactional client .in this case, we observed that, the moving average price(VERPR) ,Commercial price 2 (BWPH1),and Moving average price (if the price control is S) (SALKV) has become Zero.
Why ?
Why this 3 fields become Zero ?
Is there any link between these fields and How ?
Note: Price control "S" is maintained to the above all the materials.
Can any body help us to find out the reason ?
*What is the solution to find the Moving average price now and to update as on date ?
Is there any field , we can see the Moving average price in backend ?*
Your help will be highly appreciated.

Thanks for your answers, But..
There is a problem that we are supporting to China and they have a local ledger and they will calculate the actual costing based on tha moving price.Now these 10 Materials are Finished goods and are available in 30 plants each.
Taking the MAP from the each plant and calucating it ... is very problem and headache Job .
My question is ....
How it got deleted and why ?
Is there any relation between these three fileds ?
Easiest way of collecting the MAP ?
Any thought will get the appreciation..
Thanks
Raju

Moving average price in case of project stock

Similar Messages

Maybe you are looking for