Moving cursor causes screen to go to previous screen

moving cursor causes screen to go to previous screen

How are you moving the cursor with three fingers on a track pad? That would be normal.

Similar Messages

How to populate the next screen based on the previous screen table control

Hi Experts,
Is this possible to generate the next screen values based on the table control values in previous screen.
My Requirement is
In my First screen i m having 5-7 regional offices in table control and also amount field for each regional offices.(amount field is editable)
User has to enter amount field for Regional office..based on the amount field i need to process the next screen. For Ex if user is entering amount for 3 regional offices out of 7 regional offices then i need to get the screen for the 3 regional offices..
Pls suggest me how to do this..
Regards,
Zakir

Hi Zakir,
Do you have any button for calling the second screen after entering amount in the first table control screen or you have to call the screen on pressing enter on the table control?
You will have to handle it in the PAI of the table control loop.Get data entered in the table control in your internal table of table control.You can prepare the data passed to the next screen from this internal table. Fill the second screen elements and Use CALL SCREEN XXX. XXX is your second screen no.
Thanks,
Pawan

Having issues with clearing files off the screen, also I pad reverts to a previous screen, without any input ? Using I pad Air, latest OS just downloaded few days ago. any others with similiar problems ?

I Pad Air, I OS 8, just download several days. having issues with; screen reerts to a previous screen without input. 2 On Google Earth cannot get street view in "some instances", Okay on regular computer. 3. Unable to clear off screen, which causes problems trying to get to diferent website.

Whenever I say I "Rebooted" I always did a shut down/start up. Not a restart.
What you said works as a temporary fix, but I don't want to keep doing it because:
1) The drive makes a noise when the computer is shut down indicating the drive was disconnected improperly.
2) I don't want to shut my computer off after every use, nor do I only want to back up my computer once every few days.

How to know the previous screen number..?

Hi Expert..
Is it possible to know the previous screen number? From which screen this present screen has called ? just similar to u201CLEAVE TO SCREEN 0u201D. I want to know the last screen number.
Could you please suggest how I will able to get that screen number ?
Thanks in advance.
Regards
Satrajit.

Hi
An alternative is to take a variable of type sy-dynnr.
And when you leave from screen1 to screen2 at any user command, then assign the current screen number to this variable and control moves to the next screen.
Now you can use this variable on the next screen (presently current screen) to access the previous screen number (from which the present screen was called).
DATA : v_prev_screen TYPE sy-dynnr.
At any user command:-
v_prev_screen = sy-dynnr.
CALL SCREEN 8002. " or LEAVE TO SCREEN 8002
Now on the next screen 8002, you can access the variable v_prev_screen to the previous screen number.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

T60p - arrow keys "shift" screen side to side instead of moving cursor

T60p running WinXP - arrow keys "shift" screen side to side instead of moving cursor ; happens in Notes and Excel.
How do I reset to "normal"?

Try to turn off scroll lock (key named "ScrLk")
-gan

Go to previous screen iPhone5

Not all apps provide a "back" arrow to go back one screen. So it seems you have to go Home and start all over to get back to where you were.
Is there any way to generically go to the previous screen?

How are you moving the cursor with three fingers on a track pad? That would be normal.

Lr 3.4.1 screen crashes on load; reverts to previous screen or won't shut down--see "more like thli

1.   Have successfully imported some images to Lr 3.4.1, but when I try to import the second batch of images from the same memory card by going thro the import steps, Lr either reverts to the previous screen (of the last set of images) or the whole screen goes blank, and the tabs can't be operated, and I can't close the application either.    What have I done wrong or what do I need to do to correct this problem?
Message was edited by: Ron Bob 2.   Lr 3.4.1 crashes whern importing images from camera memory card; 3.   Can specify/name a new folder, but then it disappears; 4.   Then Lr freezes and reverts to previous image screen in Library; 5. And then when I try to reload Lr by going to File/import images from camera, Lr freezes or goes to a single blue bar at top of screen (nothing else shows in Lr); Nor can I then close Lr by ticking on the X, or by trying to exit under the file menu. 6. Am using Windows Vista (with latest updates), Lr 3.4.1, AVG 2012.     Seems to be similar problem to others reported in the "More like this" section, but I am not using 'tethered captiure', although I AM TRYING TO IMPORT FILES FROM A CAMERA MEMORY CARD. NB The heading for this complaint has been modified/edited.
Message was edited by: Ron Bob
6/9/11     Problem now seems to be resolved with the download and use of Lr 3.5!!   It seems to me that my original problems seem to be caused by the memory card and trying to download the second half of the images in a different folder???.

For xfce4 shutdown and reboot you probably have to fix the Policykit.conf: http://bbs.archlinux.org/viewtopic.php? … 19#p496619
I just got helped with this myself.
If you use my /etc/PolicyKit/PolicyKit.conf make sure you use your own "login name"...... mine is "seventy3" so use your own "$USER" name like the HAL ArchWiki page says here: http://wiki.archlinux.org/index.php/HAL … utomounter
Last edited by methuselah (2009-02-10 20:30:06)

Warping cursor to other screen in Awesome, when reaching screen edge

I'm using xfce with awesome as window manager. One of the most annoying "feature" in xfce is that desktop icons are always in the left screen. Because I'm using Awesome, I can't move icons manually to the right screen and because of xfdesktop's nature Awesome can't set it to spawn only to one screen or to set coordinates.
Setting right screen to left in config sets desktop icons to the correct screen but this has the obvious disadvantage. I started thinking is possible for Awesome to counter this behavior by controlling where cursor warps to the other screen. Like when cursor reached right screen's left edge, it would appear in left screen's right edge (and vice versa) and when it reached right screen's right edge, it would stay in that screen (and similarly in left screen).
what I managed to produce is following in Awesome's config (I can set correct values for all edges when basics work):
mousegrabber.run(function (mouse)
if mouse.x == 0 then
mouse.coords({x=200, y=200}, silent)
return true
end
return true
end, "fleur")
It manages to listen the mouse, but it doesn't however work anywhere near as intended. Only thing it does is change mouse cursor to ugly when starting awesome and to normal when cursor reaches left edge of the right screen. In the meanwhile mouse doesn't interact anymore with anything else.
What I'd want the script do is:
1.) warp when cursor to the set coordinates when it reaches the edge
2.) stay always on (now it exits when edge is reached)
3.) Awesome to work normally when mouse is listened
4.) Cursor to stay normal (this probably can be done by modifying the files)
how should the script be modified to achieve aforementioned?
Also if anyone has any other ideas about how to get xfce's desktop (not some dock widgets) to behave properly, I'd be glad to hear them.

After a lot of hassle and searching I found much simpler and better solution to my problem. In Xfce xfdesktop uses xfwm4 for moving icons. But for some other desktops, a file manager handles the whole thing and they work well under Awesome. I tried Nautilus and pcmanfm and I don't really have anything bad to say from the later one, it works quite perfectly under Awesome.
Last edited by Savolae (2014-09-25 18:57:47)

HT1343 On my 4 1/2 year old Macbook I could select multiple files by highlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

ghlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

Holding down the control key will invoke "right-click."
Depending on the View, holding down Shift will with either toggle the selection (Icon View), or it will make a continuous selection from the previous selection (List View or Column View).
The only way to make a continuous selection in Icon View is to drag out a selection marquee around or through the icons.
I can't remember the behavior of previous OS's.

My iPad screen has shadow from previous open screen

Example:
When I open Facebook application, I cannot see the photo because the photo blur cause from the previous screen appear as a background of the photo.

I have try to reset but the problem still occur. I hope that somebody from this committee can help me.

Internet jumps back to previous screen without warning

Hi,
Within the last week I've noticed my internet is jumping back to the previous screen without warning. I will be on firefox looking at one screen and then all the sudden I am looking at the previous screen. It does it maybe every 10 minutes. I have a MacBook Pro that I only just got December 2011. Does anyone have a clue what's wrong?
Thanks!

Are you using the TrackPad or a Mouse? If TrackPad there is a gesture feature, Swipe left/right with 2 fingers, that causes you to go Back or Forward in most web browsers. Make sure that is not what is happening. I do it myself sometime just be accident. Annoying, yes.

Automatic jump to previous screen when an arrow on left appears

There is an arrow (left hand side of screen, mid way down) that keeps popping up randomly. When it appears it causes my email screen or on-line screen to jump back to the previous screen. Does anyone have any ideas what this is all about? It is a pain, as it sometimes causes me to loose data, or is time consuming.

I checked out all the trackpad gestures, but nothing seems to make sense as to why my screen keeps doing what it is doing.
I think that this "automatic, jumping screen" happens when the Launchpad icon at the bottom of my screen, moves. ?????

When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?

When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?

I don't have a solution for you, but just wanted to let you know I used to have the exact same problem. I resolved it (for the most part....about 90% of the time, anyway) by adjusting the screensaver and power settings to never let the computer go to sleep.

Intel processor bug causes Windows 2008r2 guest to blue screen

We recently purchased several B200-M3 blades with E5-2680v2 processors. Our UCS infrastructure and blade firmware is at 2.2(1d). ESXi hosts are at 5.5u1.
From my reading of the Release Notes, this makes the new blades vulnerable to Caveat CSCuo30572 which is a bug in the v2 processors that can cause Windows 2008R2 guests to blue screen.
VMware KB2073791 also deals with this bug
The Intel Erratum is C135
Updating the firmware (2.2(1d) probably to fixed version 2.2(3d)) is a relatively long process in our environment.
Has anyone experienced this bug? Do the guests blue screen at any particular time; e.g. when booting? Are Windows 2012 guests impacted? One of our new v2 blades was running Windows 2008R2 guests for about a week without any known problem. It has since been taken out of production.
The Release Notes (2.2) description for CSCuo30572 is: "Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests." Should the PSOD (ESXi crash) actually be BSOD (Microsoft crash)? Or can ESXi purple screens be caused also, crashing the entire host?
The Release Notes also indicate that the Caveat is resolved in release 2.2(2c)A. Does the A indicate that an Infrastructure update is all that is needed? That does not seem like it would supply the fixed microcode to the processors via BIOS.
I'm basically looking for some insight before proceeding with another FW update. Thank you.

Yes, it refers to Infrastructure (UCS Manager, FI and IOM). You could just upgrade the infrastructure to 2.2.3d and leave your Servers at 2.2.1d
Table 2 Mixed Cisco UCS Releases Supported
of the release notes.
CSCuo30572
Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests.
2.1(3a)A
2.2(2c)A

How can I return to the previous screen in safari? the arrow is often grayed out.

how can I return to the previous screen in safari? the arrow is often grayed out.

Try a 2 finger swipe left or right to change screens. If that doesn't work go to System Preferences/Trackpad/More Gestures and set it up.

Moving cursor causes screen to go to previous screen

Similar Messages

Maybe you are looking for