Moving From Local Log in to network log in

Right now I am in the process of a network change.
The client computers are all loging in locally and then opening share points with a common username.
I would like to change to a client/server configuration, where each user logs in to the network rather then locally.
How do I save their local setting and files, book marks, documents on desktop etc, and move them to a new network user?
Any other tips or advice would be very welcome!
Thanks!
-=fred=-

I find it very puzzling too Linc, especially as it's not consistent.
The switcher swapping, sadly made no differnence.
Given that the routing works fine in reverse (SL accessing Lion) and not when the lion is accessing common shared areas like a drop box, internet, or the network shared drive. I'm not convinced it is switcher delay. Worth a try though
It seems to be delayed only when trying to connect as a registered administrator on the SL macs.
@Shootist
There is only one account per mac. The admin with it's password. Have tried creating another admin user on one SL Mac but this did not help.
To connect macs we have been using the "connect as" and signing in as a "registerred user" (Then entering the admin login details of the mac you are accessing)
We are presented by a list of drives on that device. Selecting one in finder mounts it for access from the external mac with full read write access.
We are not specifically setting up shared folders, permissions or drives on either machine. But logging in as the remote macs admin.
This has provided great access between machines until now.

Similar Messages

Build problem for DC's moved from Local to track

Hi All,
I have created all my DC's locally. Now i am trying to move all those to Track as per "Moving Local DC's to track" steps.
1. Creating new DC's on track.
2. Copying SRC folder from local to Track DC.
3. Copying .dcdef file.
4. Copying def file.
5. Reload the DC in WebDynpro Explorer.
6. Rebuilding DC.
7. Builing DC.
in normal case at 7th step build log should be like as follows:
Development Component Build (2009-01-13 20:14:19)
Component name: claim
Component vendor: comp.org
SC compartment: comp.org_GDB_OPERATIONS_1
Configuration: WAS_MIGA_D
Location: WAS_MIGA_D
Source code location: http://nwdi:50000/dtr/ws/MIGA/comp.org_GDB_OPERATIONS/dev/inactive/DCs/comp.org/claim/_comp/
DC root folder: C:\Documents and Settings\wb346456\.dtc\0\DCs\comp.org\claim\_comp\
DC type: Web Dynpro
Host: ODC59MS91BS
DC Model check:
          [dcmake] All used DCs are available locally
          [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/cmi"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
          [dcmake] DC model check OK
Start build plugin:
          [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
          [dcmake] starting build plugin from : C:\Documents and Settings\XXXXXXXX\.dtc\0\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
Build Plugin 'WebDynproPlugin', Version 6.40 SP 19 (630_VAL_REL, built on 2006-10-27 02:01:51 CEST)
   development component: claim (comp.org)
      software component: GDB_OPERATIONS (comp.org)
                location: WAS_MIGA_D
                    type: Web Dynpro
           build variant: default
         source location: http://nwdi:50000/dtr/ws/MIGA/comp.org_GDB_OPERATIONS/dev/inactive/
       plugin start time: 2009-01-13 20:14:19 GMT-05:00 (EST)
                 Java VM: Java HotSpot(TM) Client VM, 1.4.2_09-b05 (Sun Microsystems Inc.)
General options:
convert *.xlf to *.properties: yes
include sources for debugging: yes
Source folder META-INF exists but is empty.
Plugin initialized in 0.063 seconds
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.125 seconds
Executing macro file..
Using macro file:     C:\Documents and Settings\wb346456\.dtc\0\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\macros\build.vm
Creating output file: C:\Documents and Settings\wb346456\.dtc\0\DCs\worldbank.org\claim\_comp\gen\default\logs\build.xml
Macro file executed in 0.577 seconds
but for my DC's build log has stopped with folllowing information. But DC build ended with warning:
Development Component Build (2009-01-13 20:12:25)
Component name: cmpsdoc
Component vendor: comp.org
SC compartment: worldbank.org_GDB_OPERATIONS_1
Configuration: WAS_MIGA_D
Location: WAS_MIGA_D
Source code location: UNKNOWNDCs/comp.org/cmpsdoc/_comp/
DC root folder: C:\Documents and Settings\XXXXXXXX\.dtc\0\DCs\comp.org\cmpsdoc\_comp\
DC type: Web Dynpro
Host: ODC59MS91BS
DC Model check:
          [dcmake] All used DCs are available locally
          [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/cmi"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
          [dcmake] validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
          [dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
          [dcmake] DC model check OK
Start build plugin:
          [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
          [dcmake] starting build plugin from : C:\Documents and Settings\wb346456\.dtc\0\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
What we suspect is that WebDynpro build plugin WebDynproPlugin is not picking at the time of building the DC.
If any one having any idea about this issue please let me know what whould be the solution.
Thanks,
Udaya Dumpa.
Edited by: Uday Bhaskar on Jan 14, 2009 9:12 PM

Hi Uday,
Please try out this way and let me know if it is working fine :
1)Create a new dc on the track.
2)Copy the contents of the local except .dcdef and .project file to the new one on the track.
3)Build the new dc and deploy.

Is there a way to recover messages after they've been moved from local folders to an IMAP account, which deleted them after they were moved?

I was trying to get Thunderbird to access my Hotmail account through IMAP instead of POP, so I moved all my messages from the account to "Local Folders", then I removed the POP account and created the new IMAP one. After that I started to move messages into the IMAP account, but I ran into some trouble when the server wouldn't want to accept all the messages I was uploading and it would stop.
So, I decided to move everything from "Local Folders" into the IMAP account while Thunderbird was offline, once it finished, I went online and instead of uploading the newly found messages in my IMAP account to the server, it decided to delete the messages. I guess because the actual online account contained no files so it wanted to synchronise and make my offline folder to also contain no files.
In short, never try this. It's a disaster. And, I know I should've made a back up prior to trying this, it's just that Thunderbird is usually very reliable, it never occurred to me.
I still have the MBOX and MSF files, but even though they contain information, no extension can extract it.
Could anyone, please, help me out?

Hi,
I had tried using that very same extension right after messing things up, but it hadn't worked because I deleted the original folders as well.
Then I tried doing a System Restore (luckily, Windows had decided to do an automatic one the night before), but still the missing emails weren't showing.
A while after that I saw your suggestion and it hit me that I had not tried it after doing the System Restore, so I tried it and all messages were flooding back just like magic.
Thank you very much for your help! I'm very happy right now.

How do I move all photos and catalog (PE 6) from local computer drive to network server drive?

I'm using PE 6. I have about 40 GB of photos all organized and cataloged on my local PC's hard drive. I have just installed a home server that is networked and want to move/migrate all the photos and catalog information/organization from my local PC drive to the home server's hard drive. Basically, just moving everything to a new drive. I then need to point PE 6 to this new location for the photos and catalog information. All advice on how to do this would be appreciated?

I just got done doing this and I'm not so sure I'd recommend it.
#1 reason: The #$%%#$ Organizer has REAL PROBLEMS figuring out network path names. It has this really nasty habit of thinking, say, \\homeserv\photos, \\Homeserv\Photos, and \\HOMESERV\PHOTOS are DIFFERENT paths. And depending on how you use it to navigate, or drag and drop files onto it, or teach it to watch a folder on a network drive or whatever, it uses variants on these kinds of path names. This leads to problems like duplicate imports that are really the same file.
What a ***.
You MIGHT have better luck if you use a mapped drive letter to make this work. Sad. The rules for writing WinApps to NOT NEED mapped drive letters have been common knowledge to developers for a decade. Just not Adobe developers, apparently. Beyond sad. Pathetic.

Moving from local to OD

I "inherited" the management of an OS X server (10.4.4), that runs AFP, Mail services and DHCP.
The first thing I want to do, is migrate the users from the local directory (/Netinfo/DefaultLocalNode) to the LDAP (about 5 users).
I have never done this before. Is there a good procedure ? I might import/export the whole list, but I don't feel too confident regarding the Mail-service.
Any hints are most welcome.

D#vi1_x, did you ever get an answer to moving local directories to the LDAP? I'm needed to set up a few users, so far I've only promoted the managment software to OD master.. I only get in front of the server a few times a month so any help would be cool-

I am logged on to a wifi and can see files from other users on this network. Can they see my files as well?

I am logged on to a wifi and can see files from other users on this network. Can they see my files as well?

Yes and no. It depends on your settings.
Go into "System Preference" and click on "Sharing"
If you have services checked such as "File Sharing" then others can see your computer on the network. But you really don't need to worry because others would need your username and password to have access to your files.
What you see are just computers annousing themselfs on the network. To have access to said computers, Username and Passwords are required.
Hope this helps

Can I enable the root user account from the log in screen when I am locked out of the machine?

Hello everyone,
I am working on my friends mac to get it ready to sell. I went into the advanced options of the user and changed the name of the account. That's all I changed. I did read the warning that said if anything was changed it could cause damage, that's why I only changed the name of the user account. I didn't want to mess with anything else. Well, needless to say, I am locked out of the machine. Apparently the root user, system administrator, account was not enabled and I am stuck at the screen that I can get to with my installation disc. So how can I enable the root user account and get back onto the machine from the screen I am at? Can I enable the root user from terminal? I spent a good 8 hours yesterday researching this topic and have come up empty. Changing passwords from commands in terminal is not the problem. I am given just one account to choose from to log on and it's not accepting the password because of the changes I made in the advanced options menu.
Is there any hope of getting this thing going again? Or have I just screwed myself over?
Thanks for your help!
Leah

You can reset the password.
http://pondini.org/OSX/Password.html
Do you need to recover data from it before you sell it? If not you can just wipe the disk and prepare it for sale.
See > Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
and this thread
https://discussions.apple.com/thread/5474062?tstart=0

SipServer - Message Debug: Check box for Local logging enabled is unchecked

I have configured a SipServer in my domain. The Administration Console for WebLogic Server shows an option for 'Local logging enabled' for logging sip-messages.
See SipServer > Configuration > Message Debug.
However, when I check this option, the option is ot stored in the config file sipserver.xml, so at a subsequent start up of the Console, the option is unchecked again.
When I run sip traffic, sip messages are logged in the log file (sip-messages.log), but I am not sure whether this includes the local logging or not.
Version info:
The login screen sais: WebLogic Server 11g.
After login, at the bottom of each window, it sais: WebLogic Server Version: 10.3.3.0
Is this a bug? Is it solved in some newer version?
How can I see in my log file whether local logging is done or not?

Manu,
Maybe it has something to do with it. But what shoudl I do exactly?
So Yes I am disabling all the items except one checkbox say X in TAB D initially in the when new form instance. Now checkbox X when I click it , it enables checkbox A, B and C and when I unclick it it sets all the values in A, B and C to unchecked and disables the A, B and C checkboxes.
It sounds simple concept so this works great if I don't issue a COMMIT_FORM which is in my save button but if in the middle say tab A I save the from and it has COMMIT_FORM I get record saved. Then I navigate to D TAB and there checkbox X I am still able to click it but when I try to check A, B or C I am not allowed to check or uncheck it....Should I code update_allowed property explicity for A, B and C there in the when checkbox changed of checkbox x? Why would I have to do this even though I am enabling those items ? I am confusued....

Help on Reading and Reporting From A log File

Hi there
I need any assistance on developing a class that is able to read from a log file and then be filtered and put into a report. I need to be able to search on the log files per criteria.

Chainsaw:
http://logging.apache.org/log4j/docs/chainsaw.html

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Custom logging, multiple apps in one file, different from server.log

I have several applications running on my integration server. I would like to log from these apps to a single file (different file from server.log)
I tried to use custom log4j logging, but there's a problem with the RollingFileAppender. Whenever a file is rolled, the backup copies are deleted. It probably happens because different classloaders load different apps and I configure the log4j in every app, but I don't understand classloaders.
Here is a part of the log4j.properties file:
log4j.appender.file=org.apache.log4j.RollingFileAppender
log4j.appender.file.File=/path/log
log4j.appender.file.maxBackupIndex=10
log4j.appender.file.maximumFileSize=10485760and I configure the logger in every app by
org.apache.log4j.PropertyConfigurator.configure( logPropertiesPath );(Is this wrong? Is it even possible to use one log file from different apps? The integration servers does it...)
I don't need the log4j, if the internal logging can be set up to log app. messages to a different file and configured with a different layout pattern, it would be enough.
Can anybody please help with my logging problem?

I've tried this:
I've put log4j.jar to the lib dir of the logicalhost and log4j.properties to another jar (my own) and put it to the lib dir too. I deleted the PropertyCOnfigurator.configure() line from the apps. Built it, manually deleted log4j.jar from the EARs. Then I deployed EARs, restarted the domain and ran the apps. They both logged to the same and correct file, but again the rolling didn't work. How is this possible? I thought that this way the IS should have one and only one instance of Log4j...

Can You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

How do You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

Move the files to the /Users/Shared/ folder and then to the other account's home folder.
(85927)

Read data from a log file to flex textarea while deploying

Hi,
I am new to flex. I am able to read data from a log file that placed in C drive and able to write that data into flex textarea, but I am unable to read the same file while it is deployed into weblogic sever.
Could anyone please tell me how to solve this problem.
Thanks,
Sri.

Do you have it trying to read that same file on your C drive or is the file actually deployed somewhere on the server?

Recover from currnet log file corruption in archive mode

Hi,
I am using oracle 10.2.0 on windows xp. my database is in archivelog mode. I am learning recovery. I take backup of database using
RMAN> backup database;
Starting backup at 03-SEP-09
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00004 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
input datafile fno=00001 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
input datafile fno=00003 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
input datafile fno=00002 name=D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
channel ORA_DISK_1: starting piece 1 at 03-SEP-09which completed.
my current logfile and current sequence no is
SQL> select * from v$log;
    GROUP#    THREAD# SEQUENCE#      BYTES    MEMBERS ARC STATUS
FIRST_CHANGE# FIRST_TIM
         1          1         88   52428800          1 NO CURRENT
      4475270 01-SEP-09
         2          1         86   52428800          1 YES INACTIVE
      4426127 31-AUG-09
         3          1         87   52428800          1 YES INACTIVEThen i delete my only one redolog file in my current group. my instance crashes i want to recover now first i try
SQL> startup
ORACLE instance started.
Total System Global Area 289406976 bytes
Fixed Size                  1248576 bytes
Variable Size              92275392 bytes
Database Buffers          188743680 bytes
Redo Buffers                7139328 bytes
Database mounted.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1:
'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
SQL> recover database until cancel;
ORA-00279: change 4500421 generated at 09/03/2009 10:49:48 needed for thread 1
ORA-00289: suggestion : D:\1\ARC00088_0693601900.001
ORA-00280: change 4500421 for thread 1 is in sequence #88
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF'
ORA-01112: media recovery not startedit doesn't work then i do
RMAN> restore database
2> ;
Starting restore at 03-SEP-09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
restoring datafile 00002 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
restoring datafile 00003 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
restoring datafile 00004 to D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
channel ORA_DISK_1: reading from backup piece D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03
KP
channel ORA_DISK_1: restored backup piece 1
piece handle=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03\O1_MF_NNNDF_TAG20090903T104947_5
channel ORA_DISK_1: restore complete, elapsed time: 00:02:16
Finished restore at 03-SEP-09
RMAN>
RMAN> recover database until sequence 87;
Starting recover at 03-SEP-09
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/03/2009 11:06:06
RMAN-06556: datafile 1 must be restored from backup older than scn 4444743It means i need an older backup but i have new backup how to restore or get my database up.
Thanks
umesh

Thanks for reply
i have this in my hand
RMAN> list backupset;
List of Backup Sets
===================
BS Key Type LV Size       Device Type Elapsed Time Completion Time
1       Full    1.38G      DISK        00:02:21     03-SEP-09
        BP Key: 1   Status: AVAILABLE Compressed: NO Tag: TAG20090903T104947
        Piece Name: D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03\O1_MF_NNNDF_TAG20090903T104947_59YNHNSK_.BKP
List of Datafiles in backup set 1
File LV Type Ckp SCN    Ckp Time Name
1       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
2       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
3       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
4       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
BS Key Type LV Size       Device Type Elapsed Time Completion Time
2       Full    6.80M      DISK        00:00:03     03-SEP-09
        BP Key: 2   Status: AVAILABLE Compressed: NO Tag: TAG20090903T104947
        Piece Name: D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03\O1_MF_NCSNF_TAG20090903T104947_59YNN8J9_.BKP
Control File Included: Ckp SCN: 4500486      Ckp time: 03-SEP-09
SPFILE Included: Modification time: 03-SEP-09
RMAN> restore database preview;
Starting restore at 03-SEP-09
using channel ORA_DISK_1
List of Backup Sets
===================
BS Key Type LV Size       Device Type Elapsed Time Completion Time
1       Full    1.38G      DISK        00:02:21     03-SEP-09
        BP Key: 1   Status: AVAILABLE Compressed: NO Tag: TAG20090903T104947
        Piece Name: D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03\O1_MF_NNNDF_TAG20090903T104947_59YNHNSK_.BKP
List of Datafiles in backup set 1
File LV Type Ckp SCN    Ckp Time Name
1       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
2       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
3       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
4       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
archive logs generated after SCN 4500421 not found in repository
Media recovery start SCN is 4500421
Recovery must be done beyond SCN 4500421 to clear data files fuzziness
Finished restore at 03-SEP-09
RMAN> backup archivelog all ;
Starting backup at 03-SEP-09
using channel ORA_DISK_1
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=1 sequence=60 recid=3 stamp=694522772
input archive log thread=1 sequence=61 recid=4 stamp=694543115
input archive log thread=1 sequence=62 recid=5 stamp=694693173
input archive log thread=1 sequence=63 recid=6 stamp=694707783
input archive log thread=1 sequence=64 recid=7 stamp=694785054
input archive log thread=1 sequence=65 recid=8 stamp=694787797
input archive log thread=1 sequence=66 recid=9 stamp=694794198
input archive log thread=1 sequence=67 recid=10 stamp=694799765
input archive log thread=1 sequence=68 recid=11 stamp=694806827
input archive log thread=1 sequence=69 recid=12 stamp=694809124
input archive log thread=1 sequence=70 recid=13 stamp=694868744
input archive log thread=1 sequence=71 recid=14 stamp=695132728
input archive log thread=1 sequence=72 recid=15 stamp=695210729
input archive log thread=1 sequence=73 recid=16 stamp=695330401
input archive log thread=1 sequence=74 recid=17 stamp=695399695
input archive log thread=1 sequence=75 recid=18 stamp=695412690
input archive log thread=1 sequence=76 recid=19 stamp=695511043
input archive log thread=1 sequence=77 recid=20 stamp=695557945
input archive log thread=1 sequence=78 recid=21 stamp=695597432
input archive log thread=1 sequence=79 recid=22 stamp=695728451
input archive log thread=1 sequence=80 recid=23 stamp=695729334
input archive log thread=1 sequence=81 recid=24 stamp=695729976
input archive log thread=1 sequence=82 recid=25 stamp=695835471
input archive log thread=1 sequence=83 recid=26 stamp=695988878
input archive log thread=1 sequence=84 recid=27 stamp=696160938
input archive log thread=1 sequence=85 recid=28 stamp=696333853
input archive log thread=1 sequence=86 recid=29 stamp=696360658
input archive log thread=1 sequence=87 recid=30 stamp=696454218
channel ORA_DISK_1: starting piece 1 at 03-SEP-09
channel ORA_DISK_1: finished piece 1 at 03-SEP-09
piece handle=D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03\O1_MF_ANNNN_TAG20090903T115246_59YR5VRV_.BKP tag=TAG20090903T1
=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:08
Finished backup at 03-SEP-09
RMAN> restore database preview;
Starting restore at 03-SEP-09
using channel ORA_DISK_1
List of Backup Sets
===================
BS Key Type LV Size       Device Type Elapsed Time Completion Time
1       Full    1.38G      DISK        00:02:21     03-SEP-09
        BP Key: 1   Status: AVAILABLE Compressed: NO Tag: TAG20090903T104947
        Piece Name: D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2009_09_03\O1_MF_NNNDF_TAG20090903T104947_59YNHNSK_.BKP
List of Datafiles in backup set 1
File LV Type Ckp SCN    Ckp Time Name
1       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF
2       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF
3       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF
4       Full 4500421    03-SEP-09 D:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF
archive logs generated after SCN 4500421 not found in repository
Media recovery start SCN is 4500421
Recovery must be done beyond SCN 4500421 to clear data files fuzziness
Finished restore at 03-SEP-09now i have two backup one is full database backup which will not work another is backup of all archivelog upto sequence 87 i think it should work.
but rman is choosing full database backup for restore.
so i need to force rman to choose archivelog backups for restore but don't know how to do it. please suggest.
Thanks
umesh

[32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000 I get this from system log using latest version of Firefox: What kind of problem is this?

I get this from system log using latest version of Firefox:
[32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000
What kind of problem is this?
Anyway Firefox seem to be working correct. I would like to be sure that it'snt a security problem.

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Moving From Local Log in to network log in

Similar Messages

Maybe you are looking for