Moving Groups of Tracking Points after Motion Tracking

I ran the motion tracking on some footage, and watched the tracking closely to keep the square on the person that I am tracking. However, once I applied the tracking data to the null layer, and attached that to the adjustment layer (which has gausian blur enabled) a lot of the tracking points are way off.
The footage starts off fine, but then huge groups of tracking points 1000's of frames in length are off where the live tracking points were by a large margin. Is there a way to mass edit these points to bring them back to their proper place, or is the only solution going frame by frame and point by point to bring them back into their proper position?
This is on a Windows Desktop machine running Windows 7 and After Effects CS4. If you need any other information, just ask.

Pre-compose the tracking data to a solid in a sub-comp and use that as an adjustment layer. You are simply seeing expexted behavior since you are creating a mismatch between adjustment layer dimensions vs. your footage/ comp dimensions and do not compensate for that. You can of course also try to do just that by using expressions like
X=position[0]+offset;
Y=position[1]+offset;
[X,Y]
Where you replace the offset with numerical values. That may not necessarily solve your problem, though, so try the first suggestion.
Mylenium

Similar Messages

Error "no connect to database " after moving group to second node.

hi experts,
I set up ERP2005 SR1 and MSSQL2005 with two nodes MSCS.
I am facing error "no connect to database session terminated mscs" from SAP GUI
after moving group to second node.
Now SPS level and kernel patch level has been not updated yet.
I counld'nt find any sap notes, so any help and suggestion could be appreciated.
Best Regards
MASAKI

solved myself . i was missing set SQL Service Account have Local Admnistrators.

QA33 - Change Output by adding Requisitioner, purchasing group and tracking

Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMAL

Rajesh,
Put a breakpoint and try to debug the report step by step.
You will findout the reason very easily.
Whenever you have a select and are trying to append into an internal table, keep checking your internal table if it is been populated with the correct records.
This way, you will findout the cause and can correct is accordingly.
Thanks,
Suresh Ganti

QA33 Change by adding Requisitioner, purchasing group and tracking number

Hi All
I have a requirement for the Standard report like QA33. The requirement is that, in the output of QA33,
The Requisitioner, Purchasing group and Tracking Number should be displayed
Please give me suggestions to do this
I searched for User Exits and I found QEVA0004, QEVA0005, QEVA0006, QEVA0007, QEVA0008, QEVA0009, QEVA0010, QLCO0001, QSS10001.
In the Above which exits I can use and how to implement them
Pls reply
Thnx in Advance
Regards
P KAMAL

GSK,
But for stock components you don't need a Purch.Group...
Have a look at the following user-exits:
COZF0001: Change purchase req. for externally processed operation
COZF0002: Change purchase req. for externally procured component
PeteA

Issue with moving grouped objects in Captivate 8

Hi,
I use grouping of objects a lot and Imake extensive use of the arrow keys to move objects and / or groups around a slide. When moving groups in Captivate 8.1, however, and this never happened in CPT 6 or 7, Captivate does the action twice.
So when selecting the group of objects and pressing the arrow keys, it moves the groups 2 pixels at a time instead of just the one. Likewise, when pressing both Shoft and an arrow key, it moves the group 20 pixels.
To add to the fun, when you select both a group of objects and a single object on the slide, the arrow-move moves the group twice but the single object only once. Jolly good fun...
This is really annoying, so if anyone has a solution for this? Is this a bug or is it a setting I should be aware of? If it is not a bug but an actual new feature of Captivate, I would love to know the reasoning behind it, but for me, it rather defies any logic right now :-)
Obviously, I figured out the workaround of 5 times the arrow key to move a group 10 pixels, but it is now impossible to move the group 1 pixel using the arrow key.
Thanks!
Best regards,
Jan.

It is a known bug, I have logged it already, please do the same. Earlier on this happened also for individual objects (prerelease), now this annoying behavior is only for groups.

Packet drop when clients moving from one Access point to another

HI All ,
I am new to wireless . I am using WS-SVC-WISM-1-K9 wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
Kindly anyone suggest me what all configuration i need to verify on the controller for Proper client roaming so that i can resolve my issues..
Please let me know in case of any explanations requiered .
Thanks in Advance !!!
Regards
Angus

For radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
For pre-shared key, any WPA should be decent enough for roaming speed.
If you're on WEP ... no comment.
If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops.

I cannot select radial filter points after I create them in Lightroom. Anyone experience this issue before and what might be the solution?

I cannot select radial filter points after I create them in Lightroom. Anyone experience this issue before and what might be the solution?

Press H to hide/show control points.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

How to Outline Group of 2D points

Hi all, just wondering if anyone knows of a function already written (or easily edited ) to handle this problem. I need to outline a group of 2d points (300,000+ points in most cases). I need something similar to the convex hull algorithim, but in this case i need to be able to address concave points as well. (So basically an outline of all the outermost points with some kind of tolerence. (An example would be a 2d point cloud representing say the letter X. What would be the best way to draw an outline of that point cloud X ?
Thanks!

It appears as though we do offer some modules that have convex hull algorithms and they are primarily associated with image processing. It could be possible, albeit awkward, to manipulate array data and supply it to the algorithms as image data.
Jeff L
National Instruments

Components group for unloading point

Hi,
How to add components group to unloading point?
How to add material to components group for unloading point.
With regards
Lakki

I got the answer

[svn:fx-trunk] 8459: Fixing current point after CloseSegment command in Path sequences.

Revision: 8459
Author:   [email protected]
Date:     2009-07-08 12:39:23 -0700 (Wed, 08 Jul 2009)
Log Message:
Fixing current point after CloseSegment command in Path sequences. Also fixing up cubic and quadratic smooth/shorthand logic (t/s) when preceding command is not a curve command).
Bugs: SDK-21866, SDK-21862, SDK-21607
Reviewer: Jason, Peter F.
QE Notes: None
Doc Notes: None
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21866
    http://bugs.adobe.com/jira/browse/SDK-21862
    http://bugs.adobe.com/jira/browse/SDK-21607
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/Path.as

Hi,
If I were you, I would Streamline the MDT Task Sequence to find the root cause.
Moreover, please refer to the link below:
How to fix Windows System32 Winload.exe Missing Or Corrupt 0xc000000f Error?
http://winwiki.org/windows-system32-winload-exe-missing-or-corrupt-0xc000000f/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Group policies not applied after upgrading to Windows 10

After signing in on my T430 the group policies delivered by the AD-server are not applied. In particular the network drives don't get mapped (there are some other policies as well, but that's the bigggest problem). When i wait for some minutes in order to force a group policies update, the network drives are slowly getting mapped. The network connection works after signing in and the connection to the server is stable. I set up a clean Windows 10 installation on my T430 (instead of before just upgrading from Windows 8.1) and without installing any third party programs oder drivers and I experience exactly the same problem. On 6 other desktop-computers Windows 10 works fine, just our 2 upgraded Lenovos don't apply the group policies after signing in. I restored my Windows 8.1 image and now it works fine again, the group policies are applied after signing in. Has anyone else experienced this problem yet and found a solution for this?

I have contacted Lenovo via phone support. They told me Windows 10 isn't tested yet, they have not made any experiences so far and in order to that officially don't support Windows 10. Drivers may work, may not work. Contrary to this list - https://support.lenovo.com/us/en/documents/ht103535 We don't use any wmi filters. But what troubles me ist that at the first login of a user all group policies are applied, including mapped network drives. So everything is fine. But all further logins make it not work. I have contacted Microsoft at well, they tell me to contact Lenovo. Lenovo on the other hand tells me to contact Microsoft...

SQL2012 SP2 CU1 Availability Group database not synchronizing after applying February Microsoft patches

Hi,
We are starting our monthly patching and have a situation with SQL2012 SP2 CU1 Availability Groups databases not synchronizing after patching the secondary replica. This seems a little like
http://support2.microsoft.com/kb/3033492/en-us which was for CU3 and CU4 builds. The dashboard on the Primary shows the secondary as not synchronizing. The errorlogs on both nodes show the connection
has recovered but the dashboard shows critical errors. This is running on Windows 2012.
Thanks
Chris

Lydia,
I am referring to MS15-009 to MS15-017 that came out on Tuesday. These are the only patches we have applied. On our two node Availability Group setup we had the patches applied to the secondary node and then it was restarted. It came up fine and SQL is running
as expected.
This is from the primary node errorlog:-
AlwaysOn Availability Groups connection with secondary database terminated for primary database 'XXX_DEVL' on the availability replica with Replica ID: {e6468c4d-9431-4052-88c0-07d3b3eb428c}. This is an informational message only. No user action is required.
A connection for availability group 'YYYYY50_AG' from availability replica 'YYYYY50AV' with id [0E53235A-0FBB-4E18-8C40-A0D72F30C36A] to 'YYYYY50BV' with id [E6468C4D-9431-4052-88C0-07D3B3EB428C] has been successfully established. This is an
informational message only. No user action is required.
AlwaysOn Availability Groups connection with secondary database established for primary database 'XXX_DEVL' on the availability replica with Replica ID: {e6468c4d-9431-4052-88c0-07d3b3eb428c}. This is an informational message only. No user action is required.
On the secondary node errorlog:-
Skipping the default startup of database 'XXX_DEVL' because the database belongs to an availability group (Group ID: 65541). The database will be started by the availability group. This is an informational message only. No user action is required.
The state of the local availability replica in availability group 'YYYYY50_AG' has changed from 'RESOLVING_NORMAL' to 'SECONDARY_NORMAL'. The replica state changed because of either a startup, a failover, a communication issue, or a cluster error. For more
information, see the availability group dashboard, SQL Server error log, Windows Server Failover Cluster management console or Windows Server Failover Cluster log.
AlwaysOn Availability Groups data movement for database 'XXX_DEVL' has been suspended for the following reason: "system" (Source ID 5; Source string: 'SUSPEND_FROM_RESTART'). To resume data movement on the database, you will need to resume the
database manually. For information about how to resume an availability database, see SQL Server Books Online.
Nonqualified transactions are being rolled back in database XXX_DEVL for an AlwaysOn Availability Groups state change. Estimated rollback completion: 100%. This is an informational message only. No user action is required.
AlwaysOn Availability Groups connection with primary database terminated for secondary database 'XXX_DEVL' on the availability replica with Replica ID: {0e53235a-0fbb-4e18-8c40-a0d72f30c36a}. This is an informational message only. No user action is required.
Now I see the suspend message. Running the select on sys.dm_exec_requests there are NO DB_STARTUP ones on either node or blocking.
Next action is probably to have the patches removed from the secondary node and see if all is well and then try patch one by one to see which one causes the issue.
Chris

Text effect where it has a pointer that motion tracks on the subject and anchors to the text?

I've tried many different search terms and had very little luck. I found one video where they use the beam but I think he was using a different version of after effects and I couldn't complete certain steps. I'm using after effects 2014 cc. Thanks!

Depending on the shot you could run AE's camera tracker and add the text so that it was locked to the camera move then track the object you wanted to add the pointer to and attach the start position of the beam effect to the text position and the other end to a null that had the tracker info.
If the camera tracker does not work out then you could stabilize the shot so that some object on the background didn't move then duplicate the stabilized shot, pre-compose the duplicate, then track the object in the shot you want to track. You would then apply that tracking data to a null, copy the null and paste it to the first comp. Then you would add your text layer to the stabilized shot and then add a solid with the beam effect. You would then attach one end of the beam to the null's position and the other end of the beam to the text. You end up with a stabilized shot the null that controls one end of the beam and the text layer stuck to the now not moving background. You add another null to the project and then tie the position of this new, let's call it destabilize, to the anchor point of your stabilized footage, use the keyframe assistant to convert the expression that ties the start end of the beam to the null to keyframes, then parent all layers to the null to put back the camera movement and track the other layers to the camera movement.
Got that? It's kind of confusing. The right technique depends entirely on the shot. If you can put the shot up on YouTube or Vimeo so we can see what you are trying to work with maybe we can give you a better idea.
Here's how to stabilize a shot, add some graphics, and then remove the stabilization using a null and simple expression.
I'm working on a more in-depth tutorial on this subject but it probably won't be up for a few days. In the mean time here's an animation preset that will work with this technique if you stabilize including stabilizing scale and rotation.
Here's another quick tutorial on how to use the camera tracker to add some text to a scene:

Then 'm selecting 3 points after camera tracker and right click them there is no SET GROUND PLANE in the list, can U help me?

Then 'm selecting 3 points and right click them there is no SET GROUND PLANE in the list, can U help me?

Quit farting around with the camera tracker. You're not nearly ready to handle it. Go here:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

Moving Groups of Tracking Points after Motion Tracking

Similar Messages

Maybe you are looking for