Moving junctions with wires

In Multisim if I have a "T" junction with a junction dot where the lines join, and then I move the line at the base of the "T" the junction dot does not move. This leaves the junction dot floating in the middle of the top line and no connection where the lines should join.
I must be doing something wrong because no one in his right mind would create a program that always worked this way (the junction moves automatically to maintain the connection in every other schematic program I have seen, even dating back to MS/DOS days).
In some cases after moving a line that connects to another line a wierd maze of traces is drawn around the connection instead of just a simple straight connection. What should be a simple "T" junction degenerates into half a dozen or more traces looped around each other. Again, I must be doing something wrong because this is just silly.
Also, if I have two lines that connect at a right angle and I drag one trace sometimes the other trace moves, totally screwing up the spacing between the traces - this is especially annoying when I have a lot of parallel traces separated by two or more grid steps and the progream tries to reposition them on a single grid spacing.
I have a situation where a wire connects a resistor and an IC pin. I have tried to draw another wire from the resistor lead but the program insists on starting the wire at the IC pin, looping it around the end of the resistor. Again, this is pretty odd!
I suspect all of these problems are related. I have looked for some options that might control these problems and haven't found any.
Is there a way to make the junction dot follow the junction when a line is moved?
Is there a way to disable the "auto scramble" mess?
Phil
Solved!
Go to Solution.

One more time!
I have a vertical wire. I have the "L" junction of another net nearby. I want to conenct the two together.
When I use "Place/Wire" the program refuses to draw a new wire between the existing wires. When I move the cursor over an existing wire the "+" cursor changes to an arrow, and if I click the existing wire is selected instead of starting a new wire. I tried to draw a new "L" between the two and later move the ends of the traces, but the program will not complete the new lines!When I press ESCape the lines disappear but a new junction dot appears in the middle of nowhere between the existing traces.
I tried placing a junction dot on the vertical trace and then drawing from this junction. Instead the program began the new line at the end of the vertical line, and not at the junction!
Phil

Similar Messages

Slow Moving Materials with qty

Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish Jain

Please check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM

Artifacts when moving object with arrow keys.

Hi all
hope this is the right place to post this question.
I want to to write simple arkanoid game in Flash (AC3). I've managed to write code that moves my paddle with arrow keys. The code looks like this:
function OnNewFrame(event:Event):void
    if (input.IsLeftHeld)
        if (paddle.x > 0)
            paddle.x -= 10;
    else
    if (input.IsRightHeld)
        if (paddle.x < stage.stageWidth - paddle.width)
            paddle.x += 10;
It works but the result is ugly. The animation is not fluent, there are times when paddle stops for a moment . Also when speed of translation is high (here it is 10) you can see that paddle is flickering at the ends, it looks like single buffering problem. You can see both of those effects here: http://www.flash-game-design.com/flash-tutorials/movOb.html , hovewer flickering is less visible due to small translation amount.
How to fix this? How can i enable double buffering (or maybe it is enabled by default)? Any help will be appreciated.
P.S. sorry for bad english

Thanks for samples, this is very kind ; p
Hovewer you are doing everything almost exactly as I'am doing. Tou are using mySymbol.x++ which means your translation speed is 1. Also I'am aware that rising frame rate will result in smoother animations, but this is not the point. So once again, my flash applications suffer from two problems:
1) Animations are not smooth. You can see this crealrly in here: http://www.kirupa.com/developer/actionscript/hittest.htm , go back to the very bottom of the page, there is an animation window, look at the smallest circle. It looks like its blinking.
2) Moving symbols with arrow keys with the method i've presnted in the first post (the same method that infeter uses ). Moved symbol is randomly stopping for the very (very very) short amount of time. You can easily spot this in infeter sample.
Many sample applications i've seen suffer from those issues. and nobody seems to see the problem, so maybe I am delusional? ; p
cheers and thank for help

How do I stop the ruler from moving along with my guide line as I move it?

Hello everyone,
I am new to muse and may well be missing the obvious here, but I have a little problem, which until it is solved is a big road block to me.
I am trying to move a guide lower on the page and can not do that because the left ruler is moving along with the guide!
How do I lock the ruler itself, so the guide can be moved to a different position on the ruler?
Totally weird. I have tried searching "locking rulers" both in this site and in google, but got no results at all. I don't think the rulers are supposed to move in the first place, so am worried that nobody out there may have an answer to this.
So I am stuck for now & I can't finish my project unless this is solved.
Thanks for reading,
Pat

I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
What happens if you uncheck rulers from top view options ?
Thanks,
Sanjit

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help

With the new TC 2TB transfer data with Wire the speed is only 20kb per minute, can anybody help ?
The fist Backup use for 260GB 15hours!
The Wifi ist Bridge configured.

We are still learning the quirks and bugs of this new box..
See the info here.. use accounts rather than disk or device password.. what happens.
https://discussions.apple.com/thread/5146963?tstart=0

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

scottkb2000 wrote:
I'm confused. I just got an email from Apple Support Community (updates) and I see that a "baltwo" response is marked "This solved my question" (no offense directed towards baltwo). The question just seems to be more defined, not resolved. This is an Apple OS problem (seemingly) and needs to be directed towards a technical representative, not the community. I would ask that if anyone knows how to push this issue towards Apple, that is where the solution lies.
File a bug report with Apple via feedback. Do note that this goes through marketing and sales. No telling when it'll get to engineering. Alternatively, if you want to report this issue directly to Apple's engineering, bypassing marketing and sales, send a bug report or an enhancement request via its Bug Reporter system. To do this, register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. You'll get a response and a follow-up number; thus, starting a dialog with engineering and you'll be able to track its status.

Simple question about moving files with applescript : Not finisched

I use this script now but the dubble files stays in folder A. I would like to delete the dubble files so the folder is empty after moving. With this script the dubble files keep is folder A.
tell application "Finder"
activate
set this_folder to ("MAC2:A")
set these_files to every file of folder this_folder
move these_files to ("MAC2:B") with replacing
end tell

Your script works fine on the same volume. If you are going to another volume (disk or server) a move become a duplicate by nature. You would have to delete the files after duplicate is complete.
After everthing is moved
tell application "Finder"
activate
set this_folder to ("PowerMac:Temp:")
set these_files to every file of folder this_folder
move these_files to ("Server:Backup:") with replacing
delete these_files
end tell
Delete each file as you go
tell application "Finder"
activate
set this_folder to ("PowerMac:Temp:")
set these_files to every file of folder this_folder
repeat with these_file in these_files
move these_file to ("Server:Backup:") with replacing
delete these_file
end repeat
end tell

I am having a file moving issue with Adobe Reader XI

I am having a file moving issue with Adobe Reader XI on a Windows 7 32bit system. When Adobe reader is set as the default program for PDF files moving files from one directory to another takes over a minute, regardless of the size of the file. When the default handler is set to another program, like Nuance or PDF Creator, this is instant. What in Adobe Reader is causing this and what can I do to speed up file moving? Any help will be greatly appreciated. Thank you.

I am using Windows 7 home edition and using Internet Explorer 10
The PDF's are online on websites that I am trying to open. Both on the site as well as trying in a new window.
Thank you
Jeff

Moving overseas with my iphone - how to make it work

So I am moving overseas with my iphone and getting conflicting reports on if I can get it to work. I need to get it unlocked to work with the other carriers. Apple has told me AT&T will unlock it and AT&T is telling me they won't. I have spoken to 2 different people at each company who say the same thing. I have to break my contract with AT&T either way, so it would seem ridiculous that my iphone would be rendered useless even though it has the capability. Anybody have any idea it AT&T will in fact unlock it..or should I just try to get it unlocked on my own? What would be the best way to do this? Any help greatly appreciated.

Well, you'll probably end up have an iPhone that work as an iPod Touch. I have not heard of AT&T unlocking anybodies phone for any reason (even if you pay the contract termination fee)

Moving backward with a JScrollBar or JSlider

Hi,
I am trying to use a JScrollBar or JSlider to move in a rowset using the JClient View Binding model.
It works fine when moving forward with the scroll bar / slider, but when I try to move backward the fields in the forms are not updated.
Is it a bug or do I have to do something special to be able to move backward.
Version: jdev 9.0.3
Oscar

To fix this for your project,
Open up this class'es source from (BC4J\src\bc4juisrc.zip)
Make a copy in your local project source (maintaining the class package structure - oracle.jbo.uicli.binding)
Then edit this method setRangeScrollValue.
Look for lines:
            if (scroll < rangeSize)
               //in scroll range. >=0 check for slider/scroll bar moving backwards.
               rsi.setCurrentRowAtRangeIndex(scroll);
            else
            {change that to
            if (scroll < rangeSize && scroll >= 0)
               //in scroll range. >=0 check for slider/scroll bar moving backwards.
               rsi.setCurrentRowAtRangeIndex(scroll);
            else
[/b]

Moving abroad with iPhone?

Hi, I'm trying to find some user's experience on moving abroad with a simlocked iPhone (most likely US people using the iPhone legally).
For example, you buy the iPhone in the US, thus you have a contract of 2 years with AT&T. What happens when you move abroad (fe. Spain), and have to use a native operator (fe. a pre-paid with Vodafone)? Does this have consequences?
Next to this: what if the 2-year contract with the operator is over, and you want to switch to another operator? Will Apple unlock the phone and leting you use it legally with any other operator? Or would it force customers to take hold of an unlocked version?
It seems to me simlocking would limit the use of the iPhone in several countries, which is why it would be great to hear from people who had to deal with these situations already.
Personally, I currently live in Belgium, yet moving to Spain in some weeks time. I am therefor choosing between waiting for the unlocked Belgian version, or getting one in Spain and being bound to an operator...
Hope to get some answers. Thanks.
Tim

The US iPhone is carrier locked to ATT. Using it in Spain would entail signing up for one of ATT's international plans and paying for international roaming.
At this time, no one knows whether ATT or Apple will provide an unlock code when the 2 years are up since no phone has hit the 2 year mark yet. Come back July 1, 2009 for that question.

Exasperated moving home with BT

Moving home with BT has turned from being easy to being a totally destructive experience and one that looks like it will cost me a fortune.
Having given 5 weeks notice BT decided to text me 3 days before the move cancelling my home move, new number, call forwarding .. everything. Explanation?.. sky (the provider at the house I am going to) have not cancelled the line.
I spent 4 hrs on the phone to BT and they advised that as sky had not canceled the line thewy had to cancel, nothing they could do and even though I was moving in 3 days (2 now) my phone / BB, the lot was all cancelled and I would have to "call them when I got to the new house and start it all again"... didnt care that I work from home, as a Web Designer !!!
Sky were advised over 2 weeks ago but BT refused to call sky so I did... they said that it was their policy to not cancel a line till the day of the move and BT knew this.... not according to anyone at BT !!... so it seems that I am the first person to ever move with a BT line to a house currently with a phone from SKY... all at BT accept this is not possible but noone can explain why as they havnt heard of this before... still, no matter, its my problem and "call us when you move and we will see what we can do... or you can go online and book"... what with I asked?... you are cutting me off "oh yes, well call us from your mobile then !!"
Ok, well I cant believe that I should be treated like this... 25 years with BT and they are screwing up not only my house move but my business too all because they cant be bothered to do anything that may or may not help.
So, below is the copy of the email I sent earlier today to Sir Michael Rake (BT Chairman)... I will be interested to see if I get a reply as although now I accept that BT are going to hurt me (oh and they wont even let me go to SKY without charging 12 months) I DO want to know or at least be reassured that I am not being "turned over" by the people at the call centres.
Can anyone help... email content to follow below...
Dear Sir Michael,
I have been a customer of BT for over 20 years but I felt I
had to let you know about the total shambles that BT are creating regarding my
home move. I will reduce the details down vastly so as not to take up too much
of your time but suffice to say I was on the phone for 4.5hrs yesterday to BT
in total.
1)      I
booked a home move weeks ago, all was fine a provisional new number was given
and although I could not have BT infinity at the new address I was offered the
best other package available.
2)      I
am moving on 22nd Sept (2 days)
3)      I
received a text message yesterday saying “your order has been cancelled”. I
received this while I was out so went straight home and called BT.
4)      I
was advised by home move dept that my telephone, broadband, new number and
installation had all been cancelled since the phone line I was moving to had
not been cancelled. I was told to get the phone line at the other end cancelled
and reorder.
5)      I
spoke to the estate agents and then the sellers who advised that they has
advised sky 10 days ago that they were moving
6)      I
called BT and told them... “no its not cancelled on our system can’t help you”
I was told. We cant reopen the order so you will have to start it all again.
7)      I
called SKY myself to be told that although they were different from everyone
else they as a company don’t cancel lines until the move date as if they did it
would screw up their own systems so they would not be cancelling till 22nd
and this was well known by BT.
8)      Called
BT back, no, not heard that before and nothing they could do.
9)      Can
I move from BT I asked?... you will be charged 12 months as you are signed up
till Sept 2012.
10)   I
said I couldn’t believe I was the first BT customer ever to move to a house
which currently has sky. Everyone agreed that this couldn’t be the case but
offered no other explanation.
11)   I
called and asked for customer relations department... “we don’t have one” I was
advised, each department looks after their own complaints. I was however put
through to an Indian guy (sorry didn’t get his name) who said he wold take
ownership and get everything sorted for me over night and would call me 10-12am
today.
12)   He
called as promised at 11am and said he would put me through to home move. After
explaining the situation AGAIN they said that if they put an order in today it
would be 11 working days and would likely get cancelled anyway. They said “best
thing to do is ring us when you get to the new property on your mobile and we
can do a new order on Thursday... if the line is cancelled). Again they offered
no explanation and agreed that I could not be the first person to move to a
house with a sky line.
13)   I
work from home as a web designer so you can imagine that internet connection is
quite important.
14)   Yesterday
the only bit of hope I was offered was by a lady who agreed it was a mess and
gave me a free 30 day hot spot access (as my existing phone will be cancelled
on Thursday I wouldn’t be able to use this currently free service) but at least
I have this access as long as I can find a hot spot where I am moving to.
15)   I
am afraid by now BT had worn me out and I accept that I will have to go without
a phone and my businesses will have to stop for as long as BT choose to keep me
offline. However what I cant accept is that I am the first person to move to a
house where there is currently a sky connection... I just cant be the first
person and if I am not then this surely must have happened (or not) before or
BT must have a policy for this.
16)   30
mins ago I rang and asked where would I go to if I wanted to escalate a
complaint. I was told to hold as again “we don’t have a complaints or customer
relations department”. I was then told that a Manager called Louise Jones would
look into my question and call me within 48 hrs... not a fat lot of good as I
am moving before then ... but I gave my mobile number for her to call anyway. I
was not offered anything else and to be honest feel like I have been kicked
down the lane till Thursday.
I can see now that I will end up in Market Rasen (where I am
moving to) on Thursday, no phone, no internet, no contract and even my call
forwarding service which I have paid for wont work as there is no number for it
to go to... so no one will be able to call me and my clients will be less than
impressed.
After giving so much notice (at least 5 weeks) to then be
cancelled just 3 days before a move with a totally implausible explanation (as
I just can’t be the first) I’m sure you will agree appears just a bit harsh. I
know as a residential customer I am not that important but this could and
possibly will impact a great deal on my business and income and no one at BT
appears to care at all.
I accept that I am pretty stuffed but while I know that I am
going to suffer I really do want to know if I am the very first person who has
ever moved to a house where sky provides service and if not then is this what
happens to everyone?
For your information I am:
(removed)
I appreciate your time and just hope you can at least get
someone to answer what would seem to be a reasonably easy question that will at
least reassure me that I am not being badly treated.
Best wishes
Dominic
Parker

Hi Domparker,
Thanks for the post and welcome to the forum. I am very sorry for the problem you are having with the home move order. I am sure I can help you. Not to sure what is going on but I would like to take a look at the order so that I can figure out the best way forward.
Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

I just moved overseas with the Military, how do I freeze my account & unlock my phone?

I just moved overseas with the Military, how do I freeze my account & unlock my phone?

annestahl
I'd love to make sure your account is taken care of! While our 4G devices are unlocked for global use already, we do need to take care of a few things to suspend your account for military deployment. Can you please reply to the Direct Message I sent you?
RuthW_VZW
Follow us on twitter @VZWSupport

How to deal with Wire Transfer in BRS?

Hi,
we are facing a problem with wire transfer in BRS.
For cheque issues and receipts we have selected Algorithm 15 and in assignment field we gave cheque number for this no problem.
for wire transfer we dont get any number how to deal with it, please suggest us.
regards & thanks,
sashi kanth.

Hi
There is no possiblity of making your Process enabled Org as EAM enabled, and you must have to create a Discrete Org where in you can make this as EAM enabled.
In R12/11i Process Enabled items/inventory items are dealt with only process, and that is the reason we can maintain an Assest item to Process enabled org which is a constriant. Hence it is adviced that, create an Inv Org (Discrete) and Enable this for EAM.
Hope this is clear.
Regards
Raj
Sierra Atlantic

Problem moving folders with Lightroom 4.4 on Mac OS 10.7.5

I am trying to move a folder of recently edited files from my desktop to an external drive where I keep all my processed files using Lightroom but I keep getting a message that the folder can not be moved.
If I try to create a new folder on the external drive using Lightroom I get a message saying the folder could not be created.
This has just happened for the first time. I have never had issues with this in the past and have successfully moved many folders over the years.
I tried rebooting Lightroom to no avail.
Any suggestions?

Make sure you have write permissions on the destination disk. You may need to repair permissions.

Moving junctions with wires

Similar Messages

Maybe you are looking for