System architecture check failed while adding a New Node in RAC
Hi Friends,
Environment:SUN Solris 10
Cluster Version:10.2.0.3
database Version:10.2.0.3.0
Due to H/W failure one of our RAC node(prod1) got formatted.
We have deleted the node(prod1) from RAC successfully.
But When i am again trying to add the node and checking prerequistes i am facing the below issue.
$ cd /software/oracle/product/crs/bin
$ ./cluvfy stage -pre crsinst -n prod1,prod2
Check: System architecture
Node Name Available Required Comment
prod2 unknown 64-bit failed
prod1 64-bit 64-bit passed
Result: System architecture check failed.But issue is that prod2 is my active(running node), so how to resolve this issue?
please suggest..
Regards
Umesh
Resolved..
Thanks...
Similar Messages
-
Manual of adding the new node on RAC with ASM
Hello everbody
Someone have the manual of the adding a new node on RAC with ASM for Solaris ?
regards
SpaulonciGo to http://www.oracle.com/technology/documentation/index.html, select your unknown database version and search for a manual named 'Oracle Clusterware and Oracle Real Application Clusters Administration and Deployment Guide'.
Werner -
Error when adding a new node to RAC 10g
Hi all,
I have a RAC 10g environment test in Linux Red Hat Umbreakble 5 with two nodes. This RAC is fine on 2 nodes.
I want to add a new node (rac3) of the following way:
- The node 1 (rac1) is started and the instance ORCL1 is online.
- The node 2 (rac2) is offline. i.e the machine is off.
- The node 3 (rac3). The machine is on and already configured
So that when I execute the CRS_home\oui\bin\addnode.bat on node 1 and put the information of node 3 (Public node name, Private node name, Virtual host name) and press next I get the following message:
OUI-35000: Fatal cluster error encountered (PRKC-1071 Nodes rac2 did not respond to ping in 30 seconds) - Sure: The machine is off;
My question is: Can´t I add a new node on RAC if a node is off ?
Anybody can help me.
Thanks.
(Wander Brazil)Interesting question.
You might have better luck getting an answer if you ask where people discuss RAC, instead of asking where people report documentation issues. (Go to http://forums.oracle.com and scroll down to 'Grid Computing' to see RAC forums.) -
"Program terminated in remote system NONE: Logon failed" when adding a new table
Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
ChristianFirst thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
One monitoring job (master job)
One master controller job
At least one data load job
One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
The Number of required data transfer jobs ,
plus one background work process for Central Master (Monitoring) Job (only one per system!),
plus one background work process for Master Controller Job,
plus 3-5 additional empty background work processes (recommended per configuration),
plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian -
System Utilities Check failed while rapid installation
Hi All,
Following error is encountered while installing Oracle Applications 11.5.10
System Utilities Check
command : cmd.exe /c C:\Stage\Stage11i\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\Program Files\MKS Toolkit C:\VC
C:\Stage\Stage11i\startCD\Disk1\rapidwiz>echo off
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
C:\WINDOWS\system32/cc.exe
'cc' is available.
'link' is not available.
ERRORCODE = 1 ERRORCODE_END
RW-50011: Error: - System Utilities Availability test has returned an error: 1
what could be the reason ?
Regards,
NeerajHi Andrew,
Thanks for the article.
Now I want to do fresh installation of MKS toolkit and all other stuff for sucessfull installation of Oracle Application.
But during the installation of mks toolkit, I am unable to specify the path for installation i.e., c:\MKS , it is saying that " An existing installation is detected. The install location cannot be changed."
But I have uninstall it through control panel->add and remove programs and manually cleaned all the physical files but still error encountered.
Please guide me how to proceed .
Regards,
Neeraj -
Seeking to fix this error: "Failed while adding virtual Ethernet switch connections."
I am getting the error below when trying ot make modifications to my Hyper-V.
I am trying to add a new Virtual Adaptor.
Hoping someone may have a suggestion on how to fix this.
Error:
New-VMSwitch : Failed while adding virtual Ethernet switch connections.
Failed to connect Ethernet switch port (switch name = 'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', port name =
'XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX', adapter GUID = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'): The system cannot
find the file specified. (0x80070002).
The operation failed because the file was not found.
At line:1 char:1
+ New-VMSwitch -Name "LAN1" -NetAdapterName "Ethernet" -AllowManagementOS $True
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], Virtualizati
onOperationFailedException
+ FullyQualifiedErrorId : ObjectNotFound,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommandAlex just a quick response to your advice re disabling AV, this did not work for me, after more searching the internet for a solution I found a post from 2013 where one poster offered the advice to go one step further, and it was to remove the AV package
completely, the package in question was KIS2013. I have KIS2015 and figured I would try it as I was getting a little frustrated with the constant failure to create a virtual switch.
Anyway, it worked for me, I removed KIS, rebooted, and the VS was created on the first attempt without any issue. So simply pausing/disabling the AV from within the AV program may not be enough, I suspect that some may work and others not, as in the case
of KIS. I wonder also if you disable the AV services at start-up if this would also work but I did not try it.
Anyway to other people experiencing this issue, I suggest disabling AV first as per Alex's advice, and if this does not work for you then suggest trying to remove the AV before doing anything more drastic like re-installation of OS as I have seen suggested
in more than one place.
Thanks
Mr Bee
--EDIT--
Just wanted to add, it is also worth 'excluding' any Hyper-V folders from the AV engine, I did not try this before removing KIS2015 so it may work without the need to remove your AV product, but on re-install I have now exluded the folders as suggest by
a few folks in various posts... -
I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
2010 and Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
Versioning Settings.
Error
This is quiet urgent issue . Any help would be really helpful.. Thanks..Hi Marlene,
Thank you very much for your suggestions.
But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
As it works in other environment, I tried figuring out the possible differences which can lead to this error.
Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
Regards,
Vineeth -
While launching Mail, I clicked on Safari, to check something while Mail got new emails, but now Mail appears on the same screen as Safari. Is there a way I can return it to it's own screen, please?
I haven't changed any prefs, only clicked Safari as mail was being launched.Sorry... Apple IDs cannot be merged...
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
From Here http://support.apple.com/kb/HE37 -
Hello,
While adding a new phone number in Iphone 5S, when you hit 'add phone', it displays the phone number types in this sequence - home fax, radio, home and then mobile. Is there a way to configure this sequence to see mobile as the very first option? i save only mobile numbers and dont see much use in home fax and other options. I know we can delete other phone number types, but i want to save few cliks for convinience
Thanks...When you add a new phone number, I think you are talking about the Contacts app.
Click "home fax" in that display that comes up. You should be able to change it to something else; e.g., home.
Then home would come up first. -
I need to add a new node to RAC Oracle 10g R2
I need to add a new node to RAC Oracle 10g R2.
what is the best mode.
cloning or step by step?
SO: Solaris 64bit
Message was edited by:
ACSHi All,
I get the following error eventhough I have followed the instruction for Solaris R2. The instruction is enclosed. Please Advise! Thanks.
/app/cluvfy/runcluvfy.sh stage -post hwos -n nod1 -verbose
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
Post-check for hardware and operating system setup was unsuccessful on all the nodes.
=========================
1. Log in as the oracle user.
2. If necessary, create the .sshdirectory in the oracle user’s home directory and
set the correct permissions on it:
$ mkdir ~/.ssh
$ chmod 700 ~/.ssh
3. Enter the following commands to generate an RSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t rsa
At the prompts:
¦ Accept the default location for the key file.
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password.
This command writes the public key to the ~/.ssh/id_rsa.pub file and the
private key to the ~/.ssh/id_rsafile. Never distribute the private key to anyone.
4. Enter the following commands to generate a DSA key for version 2 of the SSH
protocol:
$ /usr/bin/ssh-keygen -t dsa
At the prompts:
¦ Accept the default location for the key file
Pre-Installation Tasks 2-11
Creating Required Operating System Groups and User
¦ Enter and confirm a pass phrase that is different from the oracle user’s
password
This command writes the public key to the ~/.ssh/id_dsa.pub file and the
private key to the ~/.ssh/id_dsa file. Never distribute the private key to
anyone.
Add keys to an authorized key file: Complete the following steps:
1. On the local node, determine if you have an authorized key file
(~/.ssh/authorized_keys). If the authorized key file already exists, then
proceed to step 2. Otherwise, enter the following commands:
$ touch ~/.ssh/authorized_keys
$ cd ~/.ssh
$ ls
You should see the id_dsa.pub and id_rsa.pubkeys that you have created.
2. Using SSH, copy the contents of the ~/.ssh/id_rsa.puband
~/.ssh/id_dsa.pubfiles to the file ~/.ssh/authorized_keys, and provide
the Oracle user password as prompted. This process is illustrated in the following
syntax example with a two-node cluster, with nodes node1 and node2, where the
Oracle user path is /home/oracle:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node1’s password:
[oracle@node1 .ssh]$ ssh node1 cat /home/oracle/.ssh/id_dsa.pub >>
authorized_keys
oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_rsa.pub >>
authorized_keys
oracle@node2’s password:
[oracle@node1 .ssh$ ssh node2 cat /home/oracle/.ssh/id_dsa.pub
authorized_keysoracle@node2’s password:
Note: Repeat this process for each node in the cluster -
Error while adding a new col with check constriant
Hello
I tried adding a new column with check constraint but giving the error please correct me..
drop table testchk
create table testchk(typenm varchar2(5))
insert into testchk values('mon')
alter table testchk add typechk varchar2(5) default 'both' constraint chk_test check(typechk in('m','d') and typechk is not null)For the alter comman getting the ORA-02293 cannot validate error..
I dont want to create any other constriant like not null etc .. but need only one check constriant
ThanksYou cannot assign a default value = 'both' while the constraint allows only 'm' or 'd'.
This will work:
ALTER TABLE testchk ADD typechk VARCHAR2(5) DEFAULT 'both'
CONSTRAINT chk_test CHECK(typechk IN('m','d', 'both') AND typechk IS NOT NULL);Edited by: kordirko on 2010-05-14 18:41 -
Error while adding a new method to the Session Bean
Hello everyone. I'm using jdev 11g, ejb, jpa & jsf. Everything works fine. But when I try to add a custom method to the Session Bean, I'm having an error.
Here is my steps:
1) I added a new method to SessionBean.java. Something like this:
public void Hello() {
System.out.println("Hello!");
2) Then using Structure palette I exposed this method through Local interface and created data control
3) Finally, I made a command button binded to this method (just droped it from DataControls.dcx to my page)
When I start the page and click the button, I'm having the following error:
Error 500--Internal Server Error
javax.faces.el.EvaluationException: Method not found: Hello.execute(javax.faces.event.ActionEvent)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:58)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1227)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:70)
... (I've truncated the log because there is nothing important in the missing part)Yes, I have binding in the page def. Everything is correct there:
<methodAction id="Hello" RequiresUpdateModel="true" Action="invokeMethod"
MethodName="Hello" IsViewObjectMethod="false"
DataControl="PriceServiceLocal"
InstanceName="PriceServiceLocal.dataProvider"/>
I've droped the method from the Data Controls panel -
Error while adding a new field to the Segment in we31
Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharaniHi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay -
SQL Server Transacational Replication Issue while adding a new article
I have a "PULL" transaction replication toplogy (SQL server 2008 R2 - publisher,subscriber & distributor) in place and is working fie. I added a new article (table) using sp_addarticle and it works fine. Then I tried to add subscription
to the new article using sp_adddsubscrition SPROC from the publisher (details below)
EXEC sp_addsubscription @publication = @pub_name, @article = @article_name, @subscriber = @sub_server, @destination_db
= @sub_dbname, @subscription_type = N'pull',@update_mode = N'read only', @sync_type = 'sutomatic', @status = 'active',
@reserved ='Internal'
I tried with all combination of values in the @sync_type parametr,
The above command fails with the following message:
Msg 14100, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 533;
Specify all articles when subscribing to a publication using concurrent snapshot processing.
The sync_type value parameter is "replication support type" when the subscrition was added orginally to the publication. This trsnslates into a value of 3 (CONCURRENT) in sync_method
column on the outpout of sp_helppublication SP execution.
What am I doing wrong? Please advise. Your help is much appreciated.
Thanks in advance
KirtiThanks for your reposne, Mr. Cottr.
It was a type-oin the value for @sync_type parameter in the sp_addsubscription call when I posted this article originally. It was actually set to "automatic". I have posted the scripts per your request. These scripts are executed in SQLCMD mode in
SSMS query qindow. Since this is a PULL subscription, thre is another script for pP-addpullsubscription that is not incldued in this post. If you need that also, I will be glald to post that also. Thanks again for your help.
-->>>>>sp_addpublication:
USE [master]
GO
SQL Server Transactional Replication Related Scripts
Function: Configuring publication on the database at the publisher
-- TO DO: Parameters to set before executing this TSQL batch script
:SETVAR pub_dbname TestDB
:SETvar pub_name TestDB-TranPub01
:SETVAR distributor DISTRIBSVR
:SETVAR repl_admin_account <domain>\<account_name>
--replication admin account for non-prod environment
:SETVAR repl_admin_password <pwd>
--password for replication admin account
USE [$(pub_dbname)]
SET NOCOUNT ON
IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
BEGIN
RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
RETURN
END
DECLARE @dynsql sysname
,@repl_ddl int
,@allow_initialize_from_backup varchar(5)
SET @repl_ddl = 1 -- preferred value is 0 (replication of DDL statements prohibited; manually enabled
when needed only)
SET @allow_initialize_from_backup = 'true' -- preferred /do not change this value
-- Adding the transactional publication
DECLARE @desc varchar(255)
SET @desc = 'Transactional replication of database ' + QUOTENAME('$(pub_dbname)') +
' from publisher ' + QUOTENAME(@@servername) + '; Publication: ' + QUOTENAME('$(pub_name)')
PRINT '1. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
EXEC sp_addpublication
@publication = '$(pub_name)',
@description = @desc,
@retention = 0,
@add_to_active_directory = N'false',
@allow_push = N'false', -- push subscription disabled
@allow_pull = N'true', -- pull subscription enabled
@allow_anonymous = N'false',
@allow_sync_tran = N'false',
@allow_queued_tran = N'false',
@allow_dts = N'false',
@allow_initialize_from_backup = @allow_initialize_from_backup,
@allow_subscription_copy = N'false',
@compress_snapshot = N'false',
@enabled_for_internet = N'false',
@enabled_for_p2p = N'false',
@independent_agent = N'true',
@immediate_sync = N'false',
@repl_freq = N'continuous',
@replicate_ddl = @repl_ddl,
@snapshot_in_defaultfolder = N'true',
@status = N'inactive', -- initialy publication is inactive / activated later after articles
are added to the pblication
@sync_method = N'concurrent' -- preferred
IF @@ERROR <> 0 RETURN
PRINT '2. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
EXEC sp_addpublication_snapshot
@publication = '$(pub_name)',
@frequency_type = 1,
@frequency_interval = 1,
@frequency_relative_interval = 1,
@frequency_recurrence_factor = 0,
@frequency_subday = 8,
@frequency_subday_interval = 1,
@active_start_time_of_day = 0,
@active_end_time_of_day = 235959,
@active_start_date = 0,
@active_end_date = 0,
@job_login = '$(repl_admin_account)',
@job_password = '$(repl_admin_password)',
@publisher_security_mode = 1, --Windows authentiction
@publisher_login = '$(repl_admin_account)',
@publisher_password = '$(repl_admin_password)'
IF @@ERROR <> 0 RETURN
PRINT 'Executing sp_helppublication for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
EXEC sp_helppublication @publication = '$(pub_name)'
PRINT 'Executing sp_helppublication_snapshot for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
EXEC sp_helppublication_snapshot @publication = '$(pub_name)'
--->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-->>>>sp_addsubscription
USE [master]
GO
SQL Server Transactional Replication Related Scripts
Function: Register the (pull) subscription at the subscriber
-- TO DO: Parameters to set before executing this TSQL batch script
:SETVAR publisher_dbname TestDB
:SETvar publication_name TestDB-TranPub01
:SETVAR subs_server SUBSVR
:SETVAR subs_dbname TestDB
:SETVAR distributor DISTRIBSVR
:SETVAR repl_admin_account <domain>\<account_name
--replication admin account for non-prod environment
:SETVAR repl_admin_password <pwd>
--password for replication admin account
USE [$(publisher_dbname)]
SET NOCOUNT ON
IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
BEGIN
RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
RETURN
END
DECLARE @dynsql sysname
,@distibutor sysname
,@subscriber sysname
,@pub_dbname sysname
,@pub_name sysname
,@pub_login sysname
,@pub_password sysname
,@dest_dbname sysname
,@job_login sysname
,@job_password sysname
,@repl_ddl int
,@allow_initialize_from_backup varchar(5)
SET @pub_dbname = '$(publisher_dbname)'
SET @pub_name = '$(publication_name)'
SET @subscriber = '$(subs_server)'
SET @dest_dbname = '$(subs_dbname)'
SET @distibutor = '$(distributor)'
SET @job_login = '$(repl_admin_account)'
-- used by replication agents to connect
to publisher for queued updating subscriptions
-- make sure account has DBO access on subscriber
db
SET @job_password = '$(repl_admin_password)'
PRINT '1. Adding subscriber for pull subsctiption of publication ' + QUOTENAME(@pub_name) + ' on database ' + QUOTENAME(@pub_dbname) + ' ...'
EXEC sp_addsubscription
@publication = @pub_name,
@article = 'all',
@subscriber = @subscriber,
@destination_db = @dest_dbname,
@subscription_type = N'pull',
@update_mode = N'read only',
@sync_type = 'replication support only',
@status = 'active'
IF @@ERROR <> 0 RETURN
Execute sp_helpsubscription @publication = 'FTBTrade_TEST-TranPub01'
--@pub_name -
System Utilities Check - Error while installs OraApps on AIX
Hello Everyone ,
OS : AIX 5.3 TL12
Oracle Applications 11.5.10.2
while trying to install Oracle Applications on AIX everything passed the TEST / Checks except the following
[System Utilities Check] << faild with the following error message
System Utilities Check
These utilities need to be accessible on your system in order to do administrative tasks.
command : /Stage/Stage11i/startCD/Disk1/rapidwiz/bin/adchkutl.sh
Checking for make... found - /usr/bin/make
Checking for ld... found - /usr/bin/ld
Checking for cc... found - /usr/vac/bin/cc
Checking for ar... found - /usr/bin/ar
Checking for AIX 64-bit kernel extension for Oracle......
Found pw-syscall files and inittab entry on this system.
Note: you can also verify that the AIX 64bit kernel extension for
Oracle are loaded by running "/etc/loadext -r"as root:
Utility check completed successfully
System Utilities Availability test has succeeded
command : /Stage/Stage11i/startCD/Disk1/rapidwiz/bin/adaixchk.sh
AIX System Version found : 5.3
IBM VisualAge C++ v6.x or IBM XL C/C++ v7.x is required,
if you are installing any/all of the below products.
1. Discrete Manufacturing.
2. Advanced planning and Scheduling.
3. Transporation Planning.
RW-50011: Error: - IBM C++ utilities Availability test has returned an error: 1
i followed Oracle Installation guide for 11i and we have installed all the required packages and system prerequisites.
if any anyone has any solution , please share it with me
Best Regards,
Sam JazzxlC.adt.include 8.0.0.0 COMMITTED C Set ++ Application
xlC.aix50.rte 10.1.0.3 COMMITTED XL C/C++ Runtime for AIX 5.3
xlC.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.rte 10.1.0.3 COMMITTED XL C/C++ Runtime
xlC.rte 10.1.0.3 COMMITTED XL C/C++ Runtime
#which linkxlC
/usr/vacpp/bin/linkxlC
Maybe you are looking for
-
Two phones on same account, one roaming the other isn't?
My husband and I both have the Samsung Galaxy S3. His phone has been roaming for days now, and my phone hasn't been. How can this be? We have a share everything plan that is nationwide. Will we be charged for roaming?
-
Data Services 4.0 - Batch Job - Export Execution Command - Error
Hi, I'm new to Data Services and tried to get started with this "how to": http://wiki.sdn.sap.com/wiki/display/BOBJ/HowToUseBusinessObjectsDataServicesinSAPBIstagingprocess Just that I used BW 7.0 instead of BI. But I got stuck at the Export Executio
-
My brother bought iphone 3gs from u.s..how to use it in india?..help me
my brother bought new iphone 3gs from u.s..how to use it in india?
-
I work a lot more with Acrobat and I am still learning but it really is a great program. I am aware that Reader is just for reading documents but I am curious as to how most of you fill out forms that you download in pdf format. Optimally, I would li
-
How to extend an Airport network further than an Express' range?
Hi, I'm trying to (massively) extend an Airport network, but there aren't electrical outlets close enough together on our property to string together a series of Airport Express "repeaters." Is there another product, eg. from a third party, that has