Moving to different weeks in the portal timesheet

Hi
We are operating Web Dynpro ABAPESS timesheet. We are currently going through the patching process and have encountered a problem. When using the timesheet it is no longer possible to move to different weeks. Below are the settings we have for the timesheet entry profile in the Time settings part.
Period type                2   Weekly data entry                                                     Periods               1
First day of week      Monday
Start date relative     Blank    Lower limit relative     Blank     Upper limit relative         Blank
I have tested and entering 99 in the Lower limit relative will allow us to go back to April 2012 but at the moment in our productive system will can go back to 2005 (our go live).   If I enter 4 in the periods field I am allowed to go back to July 2006. Ideally I would like user to be able to go
back to our go live.
I have two questions:
1)            Why when leaving the “Lower limit relative” blank allowed users to move to whatever week they wanted to, does not work any longer?
2)            What is the connection between period field and the lower limit relative field?
Thanks
Mark

period means which screen you want to have ie Weekly or Daily or bi weekly, and here is the connection depending upon what you enter above Enter the number of times users can scroll using the current data entry profile. Examples You have entered the period type Weekly data entry with 2 periods. You have set the Lower limit relative to 2. In this case, users can scroll up to four weeks back from the start date of the data entry period. Dependencies Note that a higher value in the Lower limit relative field can slow down system performance, as the number of records that the system must read from the database is also higher. Now CATS web dynpro is little different when compared to CAT2 in terms of navigation. The user can see data for all the periods if upper limit and lower limit values are blank. If you want to prevent user from changing the data in the past/future period even though upper and lower limits are blank then you can make use of the user exit CATS0003 (Validate Recorded Data)

Similar Messages

Question about playlist content moving to different positions on the LCD Monitor

Hello Experts,
I'm trying to find out if there is a way to have the content move to different positions on the LCD Monitor. The presentation we have always has the contenrt in the same position on the screen. Other than creating multiple playlist and scheduliung them to play at different times I'm not sure how this can be done. But if anyone knows how this can be accomplshed please let me know.
Thank you ,
Ben
ISC Inc.

Ah! Found it.

Setting up WPC usage monitoring on the Portal

Hello Everyone,
I have been looking for a way to report on the number of portal users accessing different areas of the portal, such as KM documents, but in particular pages and objects that have been created in Web Page Composer (WPC). I know that I can monitor KM documents and have setup reporting for this using the following blog entry.
/people/michael.kronfeld/blog/2007/12/21/recording-access-to-documents-in-km - thank you Michael Kronfeld.
Unfortunately, the report generated from the above setup, outputs all logged entries using a GUID rather than the KM document name, example: u201Cpolicy.docu201D.
Iu2019m assuming that reporting on WPC activity, like the KM reporting may use the GUID method of identification, rather than the WPC object user readable name, example: u201CCareers Pageu201D.
Following the above description, does anyone know of a way to setup monitoring/logging for WPC pages/objects (article, paragraph, etc) on the portal using a method that identifies objects in a way where user readable names for WPC objects are used?
Thank you.

Kiran,
I have kind of put this one on the back burner as I have not had much luck thus far. I have however found a third party software called "Click Stream" by Sweetlets, and it looks promising.
http://www.sweetlets.com/click_stream.html
Hope this helps. I will update when and if I find out more.
Regards,
Chris

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

Settings > General > Reset > Reset Network Settings
Contact the carrier to troubleshoot.

Can we have two different logon screen for the Portal

Can we have two different logon screens for the Portal?
We should split the Logon application in two different applications:
Login # 1
should be read a DataSource.XML reading the Active Directory (Microsoft), to read-only the profiles from the AD, and block some IP address range.
Login # 2
should be read a DataSource.XML reading the Portal user only
Is this possible?

Hello Developer,
Did you find an answer to this problem. I also have a similar issue at hand and am wondering if anybody has a solution for this.
Thanks, Akhilesh

When launching Illustrator on Mac OSX 10.9 I get an erro that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue fo

When launching Illustrator on Mac OSX 10.9 I get an error that the program is no longer supported on PowerPC. I tried moving the plug-ins to a different folder as the Adobe site suggested but no luck. Any ideas how to get this launched again? Same issue for Photoshop and InDesign

You will need to uninstall, run the Cleaner tool and reinstall you adobe applications. Adobe apps don't take kindly to inplace updates of the OS on Macs.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

PWA 2010 timesheet: 2 different colors for the rows "Actual " and "Planned

Hello,
To make timesheet easier to read and fill, is it possible to have 2 different colors for the rows “Actual “ and “Planned”?
Thanks,
soudha

Hello Soudha,
By default the timesheet grid shows the cells in white color. But if you have little coding skills or a developer at your end, you can try this using "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\JsGrid.js" java
script file.
You may have to modify it but I recommend to take a backup of the file and test in your test environment first.
Happy troubleshooting.....
Vikram Daruru - MSFT

Can we use the Portal of a different BW system than we get the data from?

Hi Guys,
we use a BW on HANA ABAP System with a Business Objects Server Connection in a proof of concept scenario. The BW system HS1 has Usage Type ABAP only. Besides of this we have a “normal” BW System, P70with a Usage Type ABAP as well as Usage Type JAVA (J70). As a third component we do have a BO Server, where we have stored some DesignStudio Reports with Data from HS1.
We would like to use the existing J70 Portal of our “productive” BW Portal as an access point to the design studio reports.
What I am wondering:
Can we use the SSO Ticket that we get when we log in our portal environment to connect to our BO server?
Are we able to use then BO Reports that are connected to another BW System?
How we do this or do we have to take something into account?
Regards,
Cemal Aslan.

hey Cemal,
it might depend on your releases... we currently have a test scenario with a Portal that is being used to display reports from a 7.31 BW system as well as the embedded 7.31 BW system of an ECC6 (EHP6) ERP system (as far as the Portal is concerned, that's just another BW system). The Portal is a 7.31 system as well.
I don't know too many (technical) details as anything beyond the BW server is out of my hands. I think this was not possible in older versions of the Portal though...
Cheers,
Raf

Moving the Portal Database

I have attempted to move the portal database onto another host machine. When I move the database and point the portal at the database everything seems to work fine except for the administration area of the portal. When I try to navigate to the administration area I get an error. Can anyone help with a resolution for this?
Chris
error:
Server Error in '/portal' Application.
Runtime ErrorDescription: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine. Details:To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes:The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>

I did it a few times succesfull and this is (my) procedure:
1. stop the SAP system
2. detach th DB on the Source server
3. copy db+log files to the Target server
4. attach the db on the Target server
5. repair login/db user account following the steps:
- http://support.microsoft.com/kb/274188
OR
- http://blog3.daqureshi.com/archive/2008/12/16/11.aspx
6. update/change the file usr\sap\<sid>\sys\profile\default.prf
7. start the configtool and within the keystore change the jdbc connection parameters so that it points to the new DB Server
8. save this action!!!!
9. exit and restart the configtool and look if its connecting to the new DB Server
10. exit the confconfigtool.
11. start your SAP System
Good Luck!
Benjamin Houttuin

Dynamic Web Template Override in an IView in the portal

We have successfully copied and changed the default web template for displaying queries in the portal and it works fine. We also use BI planning and would like to use a different template when a planning query is executed. Does anyone know if there is a way to override the default template for a query on a case by case basis? That is, when creating the web template IView, can an alternate web template somehow be specified in addition to the query or is there any exit that provides this type of control?

Hi,
sorry, this is no solution - but I can confirm the problem with anonymous service access. Maybe It is helping a little bit enclosing the problem.
It occurs regardless of authentication mode of the accessed service from iView. It happens with all system objects (web services and other PCD Systems). This problem is regardless of the Web Service or system authentication method. For auth services we tried user mapping - but doesn't work like with non-auth. services.
I can confirm that there are no problems running the same config with an authenticated portal user.
Technicaly the anonymous user is a authenticated user too, (J2EE_GUEST). He is logged in automatically during portal access with the browser. It seems there is a restriction in handling the anonymous group.
There is a other 4 week old thread on SDN, relating to the same problem (unsolved) "an XML element was malformed" error with anonymous user
I keep looking for a solution.
Regards
Michael

Can i install the Portal Server 7 on Red Hat Enterprise Linux 4 ?

hi all,
Can i install Portal Server 7 on Red Hat Enterprise Linux 4 ?
Thnx in Advance.

Hi All,
After tearing my hair out for about 3 weeks I've figured following are the steps for installing Sun Portal Server 7 on RH Linux 4. These though help successful installation I am still struggling to get the Single Sign On for the sample applications working.
1. Boot linux with the network cable disconnected. (cable disconnected or wireless disabled is very important).
2. set Hostname to localhost.localdomain
3. Start INstaller (I always used the root login).
4. Once the components list comes up "select All" then unselect "Sun POrtal Server 7" and "Sun Java System Portal Secure Remote Access". (trust me firends I am not kidding around).
5. Follow steps of installation. Provide a password wherever requested. Highly suggested that you note down the options and the values you are entering in each step. Its about 20 page installer. Also whereever host and domain is asked for use localhost.localdomain. IP should be 127.0.0.1. Valid IP and valid domain name will also work but I haven't gone that route yet.
6. Take special note of the LDAP Admin Password and LDAP user password. Note the usernames too. The admin password and user passwords HAVE to be different. DO NOT Forget the admin password. Default admin name is amAdmin.
7. Go ahead and let the installation complete.
8. I always used localhost.localdomain as domain name and host name and IP to loopback address 127.0.0.1
Once the installation is complete start newly installed server in the following sequence
A. To start localhost slapd:
cd /var/opt/sun/directory-server/slapd-localhost/
./start-slapd
cd /var/opt/sun/directory-server/
./start-admin
(you can test here by running ./startconsole and loggin in using the admin username and password (you you should have remembered those... don't tell me I didn't warn you :)...)
B. To start Sun Java System Application Server
cd /opt/sun/appserver/bin
./asadmin start-domain --user [username] --passwordfile [a simple txt file with only the password in it] [domain name]
e.g.
./asadmin start-domain user admin passwordfile adminpassword.txt domain1 OR
./asadmin start-domain user admin password pass123 domain1
takes a few seconds to kick it off.
open browser and go to http://localhost.localdomain:8080/ to check if application server is running
C. To start Identity Server
cd /opt/sun/identity/bin
./amserver start
Now go to the SunPortal Server installer again and run it.
9. In the screen that asks whether you want to install only or configure select configure now.
10. Fill in required parameters like password. and user name. ( I kept ALL default and used the same password all throughout except for LDAP admin, I am doing this for a PoC so security be damned at the moment ).
11. Be sure to fill in the correct LDAP admin and user passwords because else installation will fail.
12. Let the installation roll
13. At about 38% it will give a popup warning configuration may take upto an hour. If you get to click on this popups ok button good things are progressing fine. If not some server didn't start right.
14. Takes about 15 minutes (depends on machine config) after you hit okay for the configuration to complete. Anything lesser check logs for any failure notices.
15. IF all success reported congratulations!!!
16. Goto http://localhost.localdomain:8080/portal/ to go to portal home page
IT STILL DOESN"T WORK!!! HELP!!!
Folks after all I said above it still doesn't work. When I go to any of the portal server Sample Applications and try to log in using the default usernames
Community Samples has test/test
Enterprise Sample has mary/mary ed/ed etc
I cannot log in... The screen simply refreshes but doesn't go anywhere.
I am suspecting this is because the domain and host is pointing to localhost.localdomain instead it should be given a valid domain name and a valid host and a valid IP instead of 127.0.0.1. If anyone can throw anymore light on this I'll be grateful.

CATS0003 or CATS0006 - how are these invoked on the portal?

Hi Folks,
How are the enhancements CATS0003 and CATS0006 invoked on the portal, is it the refresh or review button? What's the difference between them?
Thanks,
Ann

yes there should be a action performed then the exit will be called in the user interface
a refresh or review should do the trick
The call are made to CATS_EXTERNAL_INTERFACE which in turn calls
the CATS0006 customer-exit.
Actions on the Exit are captured in
HRXSS_CAT_WD_RECORD
IV_ACTION > On_review : happens when you review the timesheet
ON_RECORD_MODE_CHANGED : Happens on both occasion
of daily and weekly switch

Data of column datatype CLOB is moved to other columns of the same table

Hi all,
I have an issue with the tables having a CLOB datatype field.
When executing a simple query on a table with a column of type CLOB it returns error [POL-2403] value too large for column.
SQL> desc od_stock_nbcst_notes;
Name Null? Type
OD_STOCKID N NUMBER
NBC_SERVICETYPE N VARCHAR(40)
LANGUAGECODE N VARCHAR(8)
AU_USERIDINS Y NUMBER
INSERTDATE Y DATE
AU_USERIDUPD Y NUMBER
MODIFYDATE Y DATE
VERSION Y SMALLINT(4)
DBUSERINS Y VARCHAR(120)
DBUSERUPD Y VARCHAR(120)
TEXT Y CLOB(2000000000)
NBC_PROVIDERCODE N VARCHAR(40)
SQL> select * from od_stock_nbcst_notes;
[POL-2403] value too large for column
Checking deeply, some of the rows have got the data of the CLOB column moved in another column of the table.
When doing select length(nbc_providercode) the length is bigger than the datatype of the field (varchar(40)).
When doing substr(nbc_providercode,1,40) to see the content of the field, a portion of the Clob data is retrieved.
SQL> select max(length(nbc_providercode)) from od_stock_nbcst_notes;
MAX(LENGTH(NBC_PROVIDERCODE))
162
Choosing one random record, this is the stored information.
SQL> select length(nbc_providerCode), text from od_stock_nbcst_notes where length(nbc_providerCode)=52;
LENGTH(NBC_PROVIDERCODE) | TEXT
-------------------------+-----------
52 | poucos me
SQL> select nbc_providerCode from od_stock_nbcst_notes where length(nbc_providerCode)=52;
[POL-2403] value too large for column
SQL> select substr(nbc_providercode,1,40) from od_stock_nbcst_notes where length(nbc_providercode)=52 ;
SUBSTR(NBC_PROVIDERCODE
Aproveite e deixe o seu carro no parque
The content of the field is part of the content of the field text (datatype CLOB, containts an XML)!!!
The right content of the field must be 'MTS' (retrieved from Central DB).
The CLOB is being inserted into the Central DB, not into the Client ODB. Data is synchronized from CDB to ODB and the data is reaching the client in a wrong way.
The issue can be recreated all the time in the same DB, but between different users the "corrupted" records are different.
Any idea?

939569 wrote:
Hello,
I am using Oracle 11.2, I would like to use SQL to update one column based on values of other rows at the same table. Here are the details:
create table TB_test (myId number(4), crtTs date, updTs date);
insert into tb_test(1, to_date('20110101', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110201', 'yyyymmdd'), null);
insert into tb_test(1, to_date('20110301', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110901', 'yyyymmdd'), null);
insert into tb_test(2, to_date('20110902', 'yyyymmdd'), null);
After running the SQL, I would like have the following result:
1, 20110101, 20110201
1, 20110201, 20110301
1, 20110301, null
2, 20110901, 20110902
2, 20110902, null
Thanks for your suggestion.How do I ask a question on the forums?
SQL and PL/SQL FAQ

Log on to the portal

Hi
I have installed the Portal 6.0 SP2 (version is 6.0.2.4.1.Enterprise_Portal_Service_Pack_2 and Operating system is Windows 2000)
I have created a user to login to the portal (I have disabled the user SAP*) and I can login to the portal with my new user.
The problem is that I cannot login to the portal if I try through another PC that is connected to the network. I can see the initial login page of the portal but when I type the ID and password I don't get logged in (it redirects me to the same page)!!! If I try to give wrong ID or password I get an authentication error!!
I don't think it a network problem as I can see the initial login page of the portal.
Any ideas?
Regards
Dimitris

HI Dimitris,
We are running EP 6 SP10 and encountering the same error. Our Portal URL is working on a few machines but on some machines it keeps loading the first page. Also observed the same on different machines but same users.
Could you tell us what kind of DNS configuration did you do to correct this behavior?
Thanks,

Print a KM document displayed in the portal

Hi Experts,
I'm implementing ESS MSS for a client and I was asked to add an iview in the same page as Address to inform employees which other companies/phone provider.. they should inform when they change their address.
I added a KM document with the different addresses they should contact and displayed on the right on the screen like they asked.
Now they want to add a print button in order to print this KM document directly from the portal, I suggested the 'by default' browser's print clicking in the right button but they refuse (because the page is printed and not only the KM iview), they want to have a seperate button to print just the KM document.
Any suggestion guys?
Thanks you

In this case nothing to do with the KM Document iview.
You need to write your custom code in the KM document for getting the print button and print functionality.
Raghu

Moving to different weeks in the portal timesheet

Similar Messages

Maybe you are looking for